/* * Date built-ins * * Unlike most built-ins, Date has some platform dependencies for getting * UTC time, converting between UTC and local time, and parsing and * formatting time values. These are all abstracted behind DUK_USE_xxx * config options. There are built-in platform specific providers for * POSIX and Windows, but external providers can also be used. * * See doc/datetime.rst. * */ #include "duk_internal.h" /* XXX: currently defines unnecessary symbols when DUK_USE_DATE_BUILTIN is disabled. */ /* * Forward declarations */ DUK_LOCAL_DECL duk_double_t duk__push_this_get_timeval_tzoffset(duk_hthread *thr, duk_small_uint_t flags, duk_int_t *out_tzoffset); DUK_LOCAL_DECL duk_double_t duk__push_this_get_timeval(duk_hthread *thr, duk_small_uint_t flags); DUK_LOCAL_DECL void duk__twodigit_year_fixup(duk_hthread *thr, duk_idx_t idx_val); DUK_LOCAL_DECL duk_ret_t duk__set_this_timeval_from_dparts(duk_hthread *thr, duk_double_t *dparts, duk_small_uint_t flags); /* * Other file level defines */ /* Debug macro to print all parts and dparts (used manually because of debug level). */ #define DUK__DPRINT_PARTS_AND_DPARTS(parts,dparts) do { \ DUK_D(DUK_DPRINT("parts: %ld %ld %ld %ld %ld %ld %ld %ld, dparts: %lf %lf %lf %lf %lf %lf %lf %lf", \ (long) (parts)[0], (long) (parts)[1], \ (long) (parts)[2], (long) (parts)[3], \ (long) (parts)[4], (long) (parts)[5], \ (long) (parts)[6], (long) (parts)[7], \ (double) (dparts)[0], (double) (dparts)[1], \ (double) (dparts)[2], (double) (dparts)[3], \ (double) (dparts)[4], (double) (dparts)[5], \ (double) (dparts)[6], (double) (dparts)[7])); \ } while (0) #define DUK__DPRINT_PARTS(parts) do { \ DUK_D(DUK_DPRINT("parts: %ld %ld %ld %ld %ld %ld %ld %ld", \ (long) (parts)[0], (long) (parts)[1], \ (long) (parts)[2], (long) (parts)[3], \ (long) (parts)[4], (long) (parts)[5], \ (long) (parts)[6], (long) (parts)[7])); \ } while (0) #define DUK__DPRINT_DPARTS(dparts) do { \ DUK_D(DUK_DPRINT("dparts: %lf %lf %lf %lf %lf %lf %lf %lf", \ (double) (dparts)[0], (double) (dparts)[1], \ (double) (dparts)[2], (double) (dparts)[3], \ (double) (dparts)[4], (double) (dparts)[5], \ (double) (dparts)[6], (double) (dparts)[7])); \ } while (0) /* Equivalent year for DST calculations outside [1970,2038[ range, see * E5 Section 15.9.1.8. Equivalent year has the same leap-year-ness and * starts with the same weekday on Jan 1. * https://bugzilla.mozilla.org/show_bug.cgi?id=351066 */ #define DUK__YEAR(x) ((duk_uint8_t) ((x) - 1970)) DUK_LOCAL duk_uint8_t duk__date_equivyear[14] = { #if 1 /* This is based on V8 EquivalentYear() algorithm (see util/genequivyear.py): * http://code.google.com/p/v8/source/browse/trunk/src/date.h#146 */ /* non-leap year: sunday, monday, ... */ DUK__YEAR(2023), DUK__YEAR(2035), DUK__YEAR(2019), DUK__YEAR(2031), DUK__YEAR(2015), DUK__YEAR(2027), DUK__YEAR(2011), /* leap year: sunday, monday, ... */ DUK__YEAR(2012), DUK__YEAR(2024), DUK__YEAR(2008), DUK__YEAR(2020), DUK__YEAR(2032), DUK__YEAR(2016), DUK__YEAR(2028) #endif #if 0 /* This is based on Rhino EquivalentYear() algorithm: * https://github.com/mozilla/rhino/blob/f99cc11d616f0cdda2c42bde72b3484df6182947/src/org/mozilla/javascript/NativeDate.java */ /* non-leap year: sunday, monday, ... */ DUK__YEAR(1978), DUK__YEAR(1973), DUK__YEAR(1985), DUK__YEAR(1986), DUK__YEAR(1981), DUK__YEAR(1971), DUK__YEAR(1977), /* leap year: sunday, monday, ... */ DUK__YEAR(1984), DUK__YEAR(1996), DUK__YEAR(1980), DUK__YEAR(1992), DUK__YEAR(1976), DUK__YEAR(1988), DUK__YEAR(1972) #endif }; /* * ISO 8601 subset parser. */ /* Parser part count. */ #define DUK__NUM_ISO8601_PARSER_PARTS 9 /* Parser part indices. */ #define DUK__PI_YEAR 0 #define DUK__PI_MONTH 1 #define DUK__PI_DAY 2 #define DUK__PI_HOUR 3 #define DUK__PI_MINUTE 4 #define DUK__PI_SECOND 5 #define DUK__PI_MILLISECOND 6 #define DUK__PI_TZHOUR 7 #define DUK__PI_TZMINUTE 8 /* Parser part masks. */ #define DUK__PM_YEAR (1 << DUK__PI_YEAR) #define DUK__PM_MONTH (1 << DUK__PI_MONTH) #define DUK__PM_DAY (1 << DUK__PI_DAY) #define DUK__PM_HOUR (1 << DUK__PI_HOUR) #define DUK__PM_MINUTE (1 << DUK__PI_MINUTE) #define DUK__PM_SECOND (1 << DUK__PI_SECOND) #define DUK__PM_MILLISECOND (1 << DUK__PI_MILLISECOND) #define DUK__PM_TZHOUR (1 << DUK__PI_TZHOUR) #define DUK__PM_TZMINUTE (1 << DUK__PI_TZMINUTE) /* Parser separator indices. */ #define DUK__SI_PLUS 0 #define DUK__SI_MINUS 1 #define DUK__SI_T 2 #define DUK__SI_SPACE 3 #define DUK__SI_COLON 4 #define DUK__SI_PERIOD 5 #define DUK__SI_Z 6 #define DUK__SI_NUL 7 /* Parser separator masks. */ #define DUK__SM_PLUS (1 << DUK__SI_PLUS) #define DUK__SM_MINUS (1 << DUK__SI_MINUS) #define DUK__SM_T (1 << DUK__SI_T) #define DUK__SM_SPACE (1 << DUK__SI_SPACE) #define DUK__SM_COLON (1 << DUK__SI_COLON) #define DUK__SM_PERIOD (1 << DUK__SI_PERIOD) #define DUK__SM_Z (1 << DUK__SI_Z) #define DUK__SM_NUL (1 << DUK__SI_NUL) /* Rule control flags. */ #define DUK__CF_NEG (1 << 0) /* continue matching, set neg_tzoffset flag */ #define DUK__CF_ACCEPT (1 << 1) /* accept string */ #define DUK__CF_ACCEPT_NUL (1 << 2) /* accept string if next char is NUL (otherwise reject) */ #define DUK__PACK_RULE(partmask,sepmask,nextpart,flags) \ ((duk_uint32_t) (partmask) + \ (((duk_uint32_t) (sepmask)) << 9) + \ (((duk_uint32_t) (nextpart)) << 17) + \ (((duk_uint32_t) (flags)) << 21)) #define DUK__UNPACK_RULE(rule,var_nextidx,var_flags) do { \ (var_nextidx) = (duk_small_uint_t) (((rule) >> 17) & 0x0f); \ (var_flags) = (duk_small_uint_t) ((rule) >> 21); \ } while (0) #define DUK__RULE_MASK_PART_SEP 0x1ffffUL /* Matching separator index is used in the control table */ DUK_LOCAL const duk_uint8_t duk__parse_iso8601_seps[] = { DUK_ASC_PLUS /*0*/, DUK_ASC_MINUS /*1*/, DUK_ASC_UC_T /*2*/, DUK_ASC_SPACE /*3*/, DUK_ASC_COLON /*4*/, DUK_ASC_PERIOD /*5*/, DUK_ASC_UC_Z /*6*/, DUK_ASC_NUL /*7*/ }; /* Rule table: first matching rule is used to determine what to do next. */ DUK_LOCAL const duk_uint32_t duk__parse_iso8601_control[] = { DUK__PACK_RULE(DUK__PM_YEAR, DUK__SM_MINUS, DUK__PI_MONTH, 0), DUK__PACK_RULE(DUK__PM_MONTH, DUK__SM_MINUS, DUK__PI_DAY, 0), DUK__PACK_RULE(DUK__PM_YEAR | DUK__PM_MONTH | DUK__PM_DAY, DUK__SM_T | DUK__SM_SPACE, DUK__PI_HOUR, 0), DUK__PACK_RULE(DUK__PM_HOUR, DUK__SM_COLON, DUK__PI_MINUTE, 0), DUK__PACK_RULE(DUK__PM_MINUTE, DUK__SM_COLON, DUK__PI_SECOND, 0), DUK__PACK_RULE(DUK__PM_SECOND, DUK__SM_PERIOD, DUK__PI_MILLISECOND, 0), DUK__PACK_RULE(DUK__PM_TZHOUR, DUK__SM_COLON, DUK__PI_TZMINUTE, 0), DUK__PACK_RULE(DUK__PM_YEAR | DUK__PM_MONTH | DUK__PM_DAY | DUK__PM_HOUR /*Note1*/ | DUK__PM_MINUTE | DUK__PM_SECOND | DUK__PM_MILLISECOND, DUK__SM_PLUS, DUK__PI_TZHOUR, 0), DUK__PACK_RULE(DUK__PM_YEAR | DUK__PM_MONTH | DUK__PM_DAY | DUK__PM_HOUR /*Note1*/ | DUK__PM_MINUTE | DUK__PM_SECOND | DUK__PM_MILLISECOND, DUK__SM_MINUS, DUK__PI_TZHOUR, DUK__CF_NEG), DUK__PACK_RULE(DUK__PM_YEAR | DUK__PM_MONTH | DUK__PM_DAY | DUK__PM_HOUR /*Note1*/ | DUK__PM_MINUTE | DUK__PM_SECOND | DUK__PM_MILLISECOND, DUK__SM_Z, 0, DUK__CF_ACCEPT_NUL), DUK__PACK_RULE(DUK__PM_YEAR | DUK__PM_MONTH | DUK__PM_DAY | DUK__PM_HOUR /*Note1*/ | DUK__PM_MINUTE | DUK__PM_SECOND | DUK__PM_MILLISECOND | DUK__PM_TZHOUR /*Note2*/ | DUK__PM_TZMINUTE, DUK__SM_NUL, 0, DUK__CF_ACCEPT) /* Note1: the specification doesn't require matching a time form with * just hours ("HH"), but we accept it here, e.g. "2012-01-02T12Z". * * Note2: the specification doesn't require matching a timezone offset * with just hours ("HH"), but accept it here, e.g. "2012-01-02T03:04:05+02" */ }; DUK_LOCAL duk_bool_t duk__parse_string_iso8601_subset(duk_hthread *thr, const char *str) { duk_int_t parts[DUK__NUM_ISO8601_PARSER_PARTS]; duk_double_t dparts[DUK_DATE_IDX_NUM_PARTS]; duk_double_t d; const duk_uint8_t *p; duk_small_uint_t part_idx = 0; duk_int_t accum = 0; duk_small_uint_t ndigits = 0; duk_bool_t neg_year = 0; duk_bool_t neg_tzoffset = 0; duk_uint_fast8_t ch; duk_small_uint_t i; /* During parsing, month and day are one-based; set defaults here. */ duk_memzero(parts, sizeof(parts)); DUK_ASSERT(parts[DUK_DATE_IDX_YEAR] == 0); /* don't care value, year is mandatory */ parts[DUK_DATE_IDX_MONTH] = 1; parts[DUK_DATE_IDX_DAY] = 1; /* Special handling for year sign. */ p = (const duk_uint8_t *) str; ch = p[0]; if (ch == DUK_ASC_PLUS) { p++; } else if (ch == DUK_ASC_MINUS) { neg_year = 1; p++; } for (;;) { ch = *p++; DUK_DDD(DUK_DDDPRINT("parsing, part_idx=%ld, char=%ld ('%c')", (long) part_idx, (long) ch, (int) ((ch >= 0x20 && ch <= 0x7e) ? ch : DUK_ASC_QUESTION))); if (ch >= DUK_ASC_0 && ch <= DUK_ASC_9) { if (ndigits >= 9) { DUK_DDD(DUK_DDDPRINT("too many digits -> reject")); goto reject; } if (part_idx == DUK__PI_MILLISECOND && ndigits >= 3) { /* ignore millisecond fractions after 3 */ } else { accum = accum * 10 + ((duk_int_t) ch) - ((duk_int_t) DUK_ASC_0) + 0x00; ndigits++; } } else { duk_uint_fast32_t match_val; duk_small_uint_t sep_idx; if (ndigits <= 0) { goto reject; } if (part_idx == DUK__PI_MILLISECOND) { /* complete the millisecond field */ while (ndigits < 3) { accum *= 10; ndigits++; } } parts[part_idx] = accum; DUK_DDD(DUK_DDDPRINT("wrote part %ld -> value %ld", (long) part_idx, (long) accum)); accum = 0; ndigits = 0; for (i = 0; i < (duk_small_uint_t) (sizeof(duk__parse_iso8601_seps) / sizeof(duk_uint8_t)); i++) { if (duk__parse_iso8601_seps[i] == ch) { break; } } if (i == (duk_small_uint_t) (sizeof(duk__parse_iso8601_seps) / sizeof(duk_uint8_t))) { DUK_DDD(DUK_DDDPRINT("separator character doesn't match -> reject")); goto reject; } sep_idx = i; match_val = (1UL << part_idx) + (1UL << (sep_idx + 9)); /* match against rule part/sep bits */ for (i = 0; i < (duk_small_uint_t) (sizeof(duk__parse_iso8601_control) / sizeof(duk_uint32_t)); i++) { duk_uint_fast32_t rule = duk__parse_iso8601_control[i]; duk_small_uint_t nextpart; duk_small_uint_t cflags; DUK_DDD(DUK_DDDPRINT("part_idx=%ld, sep_idx=%ld, match_val=0x%08lx, considering rule=0x%08lx", (long) part_idx, (long) sep_idx, (unsigned long) match_val, (unsigned long) rule)); if ((rule & match_val) != match_val) { continue; } DUK__UNPACK_RULE(rule, nextpart, cflags); DUK_DDD(DUK_DDDPRINT("rule match -> part_idx=%ld, sep_idx=%ld, match_val=0x%08lx, " "rule=0x%08lx -> nextpart=%ld, cflags=0x%02lx", (long) part_idx, (long) sep_idx, (unsigned long) match_val, (unsigned long) rule, (long) nextpart, (unsigned long) cflags)); if (cflags & DUK__CF_NEG) { neg_tzoffset = 1; } if (cflags & DUK__CF_ACCEPT) { goto accept; } if (cflags & DUK__CF_ACCEPT_NUL) { DUK_ASSERT(*(p - 1) != (char) 0); if (*p == DUK_ASC_NUL) { goto accept; } goto reject; } part_idx = nextpart; break; } /* rule match */ if (i == (duk_small_uint_t) (sizeof(duk__parse_iso8601_control) / sizeof(duk_uint32_t))) { DUK_DDD(DUK_DDDPRINT("no rule matches -> reject")); goto reject; } if (ch == 0) { /* This shouldn't be necessary, but check just in case * to avoid any chance of overruns. */ DUK_DDD(DUK_DDDPRINT("NUL after rule matching (should not happen) -> reject")); goto reject; } } /* if-digit-else-ctrl */ } /* char loop */ /* We should never exit the loop above. */ DUK_UNREACHABLE(); reject: DUK_DDD(DUK_DDDPRINT("reject")); return 0; accept: DUK_DDD(DUK_DDDPRINT("accept")); /* Apply timezone offset to get the main parts in UTC */ if (neg_year) { parts[DUK__PI_YEAR] = -parts[DUK__PI_YEAR]; } if (neg_tzoffset) { parts[DUK__PI_HOUR] += parts[DUK__PI_TZHOUR]; parts[DUK__PI_MINUTE] += parts[DUK__PI_TZMINUTE]; } else { parts[DUK__PI_HOUR] -= parts[DUK__PI_TZHOUR]; parts[DUK__PI_MINUTE] -= parts[DUK__PI_TZMINUTE]; } parts[DUK__PI_MONTH] -= 1; /* zero-based month */ parts[DUK__PI_DAY] -= 1; /* zero-based day */ /* Use double parts, they tolerate unnormalized time. * * Note: DUK_DATE_IDX_WEEKDAY is initialized with a bogus value (DUK__PI_TZHOUR) * on purpose. It won't be actually used by duk_bi_date_get_timeval_from_dparts(), * but will make the value initialized just in case, and avoid any * potential for Valgrind issues. */ for (i = 0; i < DUK_DATE_IDX_NUM_PARTS; i++) { DUK_DDD(DUK_DDDPRINT("part[%ld] = %ld", (long) i, (long) parts[i])); dparts[i] = parts[i]; } d = duk_bi_date_get_timeval_from_dparts(dparts, 0 /*flags*/); duk_push_number(thr, d); return 1; } /* * Date/time parsing helper. * * Parse a datetime string into a time value. We must first try to parse * the input according to the standard format in E5.1 Section 15.9.1.15. * If that fails, we can try to parse using custom parsing, which can * either be platform neutral (custom code) or platform specific (using * existing platform API calls). * * Note in particular that we must parse whatever toString(), toUTCString(), * and toISOString() can produce; see E5.1 Section 15.9.4.2. * * Returns 1 to allow tail calling. * * There is much room for improvement here with respect to supporting * alternative datetime formats. For instance, V8 parses '2012-01-01' as * UTC and '2012/01/01' as local time. */ DUK_LOCAL duk_ret_t duk__parse_string(duk_hthread *thr, const char *str) { /* XXX: there is a small risk here: because the ISO 8601 parser is * very loose, it may end up parsing some datetime values which * would be better parsed with a platform specific parser. */ DUK_ASSERT(str != NULL); DUK_DDD(DUK_DDDPRINT("parse datetime from string '%s'", (const char *) str)); if (duk__parse_string_iso8601_subset(thr, str) != 0) { return 1; } #if defined(DUK_USE_DATE_PARSE_STRING) /* Contract, either: * - Push value on stack and return 1 * - Don't push anything on stack and return 0 */ if (DUK_USE_DATE_PARSE_STRING(thr, str) != 0) { return 1; } #else /* No platform-specific parsing, this is not an error. */ #endif duk_push_nan(thr); return 1; } /* * Calendar helpers * * Some helpers are used for getters and can operate on normalized values * which can be represented with 32-bit signed integers. Other helpers are * needed by setters and operate on un-normalized double values, must watch * out for non-finite numbers etc. */ DUK_LOCAL duk_uint8_t duk__days_in_month[12] = { (duk_uint8_t) 31, (duk_uint8_t) 28, (duk_uint8_t) 31, (duk_uint8_t) 30, (duk_uint8_t) 31, (duk_uint8_t) 30, (duk_uint8_t) 31, (duk_uint8_t) 31, (duk_uint8_t) 30, (duk_uint8_t) 31, (duk_uint8_t) 30, (duk_uint8_t) 31 }; /* Maximum iteration count for computing UTC-to-local time offset when * creating an ECMAScript time value from local parts. */ #define DUK__LOCAL_TZOFFSET_MAXITER 4 /* Because 'day since epoch' can be negative and is used to compute weekday * using a modulo operation, add this multiple of 7 to avoid negative values * when year is below 1970 epoch. ECMAScript time values are restricted to * +/- 100 million days from epoch, so this adder fits nicely into 32 bits. * Round to a multiple of 7 (= floor(100000000 / 7) * 7) and add margin. */ #define DUK__WEEKDAY_MOD_ADDER (20000000 * 7) /* 0x08583b00 */ DUK_INTERNAL duk_bool_t duk_bi_date_is_leap_year(duk_int_t year) { if ((year % 4) != 0) { return 0; } if ((year % 100) != 0) { return 1; } if ((year % 400) != 0) { return 0; } return 1; } DUK_INTERNAL duk_bool_t duk_bi_date_timeval_in_valid_range(duk_double_t x) { return (x >= -DUK_DATE_MSEC_100M_DAYS && x <= DUK_DATE_MSEC_100M_DAYS); } DUK_INTERNAL duk_bool_t duk_bi_date_timeval_in_leeway_range(duk_double_t x) { return (x >= -DUK_DATE_MSEC_100M_DAYS_LEEWAY && x <= DUK_DATE_MSEC_100M_DAYS_LEEWAY); } DUK_INTERNAL duk_bool_t duk_bi_date_year_in_valid_range(duk_double_t x) { return (x >= DUK_DATE_MIN_ECMA_YEAR && x <= DUK_DATE_MAX_ECMA_YEAR); } DUK_LOCAL duk_double_t duk__timeclip(duk_double_t x) { if (!DUK_ISFINITE(x)) { return DUK_DOUBLE_NAN; } if (!duk_bi_date_timeval_in_valid_range(x)) { return DUK_DOUBLE_NAN; } x = duk_js_tointeger_number(x); /* Here we'd have the option to normalize -0 to +0. */ return x; } /* Integer division which floors also negative values correctly. */ DUK_LOCAL duk_int_t duk__div_floor(duk_int_t a, duk_int_t b) { DUK_ASSERT(b > 0); if (a >= 0) { return a / b; } else { /* e.g. a = -4, b = 5 --> -4 - 5 + 1 / 5 --> -8 / 5 --> -1 * a = -5, b = 5 --> -5 - 5 + 1 / 5 --> -9 / 5 --> -1 * a = -6, b = 5 --> -6 - 5 + 1 / 5 --> -10 / 5 --> -2 */ return (a - b + 1) / b; } } /* Compute day number of the first day of a given year. */ DUK_LOCAL duk_int_t duk__day_from_year(duk_int_t year) { /* Note: in integer arithmetic, (x / 4) is same as floor(x / 4) for non-negative * values, but is incorrect for negative ones. */ return 365 * (year - 1970) + duk__div_floor(year - 1969, 4) - duk__div_floor(year - 1901, 100) + duk__div_floor(year - 1601, 400); } /* Given a day number, determine year and day-within-year. */ DUK_LOCAL duk_int_t duk__year_from_day(duk_int_t day, duk_small_int_t *out_day_within_year) { duk_int_t year; duk_int_t diff_days; /* estimate year upwards (towards positive infinity), then back down; * two iterations should be enough */ if (day >= 0) { year = 1970 + day / 365; } else { year = 1970 + day / 366; } for (;;) { diff_days = duk__day_from_year(year) - day; DUK_DDD(DUK_DDDPRINT("year=%ld day=%ld, diff_days=%ld", (long) year, (long) day, (long) diff_days)); if (diff_days <= 0) { DUK_ASSERT(-diff_days < 366); /* fits into duk_small_int_t */ *out_day_within_year = -diff_days; DUK_DDD(DUK_DDDPRINT("--> year=%ld, day-within-year=%ld", (long) year, (long) *out_day_within_year)); DUK_ASSERT(*out_day_within_year >= 0); DUK_ASSERT(*out_day_within_year < (duk_bi_date_is_leap_year(year) ? 366 : 365)); return year; } /* Note: this is very tricky; we must never 'overshoot' the * correction downwards. */ year -= 1 + (diff_days - 1) / 366; /* conservative */ } } /* Given a (year, month, day-within-month) triple, compute day number. * The input triple is un-normalized and may contain non-finite values. */ DUK_LOCAL duk_double_t duk__make_day(duk_double_t year, duk_double_t month, duk_double_t day) { duk_int_t day_num; duk_bool_t is_leap; duk_small_int_t i, n; /* Assume that year, month, day are all coerced to whole numbers. * They may also be NaN or infinity, in which case this function * must return NaN or infinity to ensure time value becomes NaN. * If 'day' is NaN, the final return will end up returning a NaN, * so it doesn't need to be checked here. */ if (!DUK_ISFINITE(year) || !DUK_ISFINITE(month)) { return DUK_DOUBLE_NAN; } year += DUK_FLOOR(month / 12.0); month = DUK_FMOD(month, 12.0); if (month < 0.0) { /* handle negative values */ month += 12.0; } /* The algorithm in E5.1 Section 15.9.1.12 normalizes month, but * does not normalize the day-of-month (nor check whether or not * it is finite) because it's not necessary for finding the day * number which matches the (year,month) pair. * * We assume that duk__day_from_year() is exact here. * * Without an explicit infinity / NaN check in the beginning, * day_num would be a bogus integer here. * * It's possible for 'year' to be out of integer range here. * If so, we need to return NaN without integer overflow. * This fixes test-bug-setyear-overflow.js. */ if (!duk_bi_date_year_in_valid_range(year)) { DUK_DD(DUK_DDPRINT("year not in ecmascript valid range, avoid integer overflow: %lf", (double) year)); return DUK_DOUBLE_NAN; } day_num = duk__day_from_year((duk_int_t) year); is_leap = duk_bi_date_is_leap_year((duk_int_t) year); n = (duk_small_int_t) month; for (i = 0; i < n; i++) { day_num += duk__days_in_month[i]; if (i == 1 && is_leap) { day_num++; } } /* If 'day' is NaN, returns NaN. */ return (duk_double_t) day_num + day; } /* Split time value into parts. The time value may contain fractions (it may * come from duk_time_to_components() API call) which are truncated. Possible * local time adjustment has already been applied when reading the time value. */ DUK_INTERNAL void duk_bi_date_timeval_to_parts(duk_double_t d, duk_int_t *parts, duk_double_t *dparts, duk_small_uint_t flags) { duk_double_t d1, d2; duk_int_t t1, t2; duk_int_t day_since_epoch; duk_int_t year; /* does not fit into 16 bits */ duk_small_int_t day_in_year; duk_small_int_t month; duk_small_int_t day; duk_small_int_t dim; duk_int_t jan1_since_epoch; duk_small_int_t jan1_weekday; duk_int_t equiv_year; duk_small_uint_t i; duk_bool_t is_leap; duk_small_int_t arridx; DUK_ASSERT(DUK_ISFINITE(d)); /* caller checks */ d = DUK_FLOOR(d); /* remove fractions if present */ DUK_ASSERT(DUK_FLOOR(d) == d); /* The timevalue must be in valid ECMAScript range, but since a local * time offset can be applied, we need to allow a +/- 24h leeway to * the value. In other words, although the UTC time is within the * ECMAScript range, the local part values can be just outside of it. */ DUK_UNREF(duk_bi_date_timeval_in_leeway_range); DUK_ASSERT(duk_bi_date_timeval_in_leeway_range(d)); /* These computations are guaranteed to be exact for the valid * E5 time value range, assuming milliseconds without fractions. */ d1 = (duk_double_t) DUK_FMOD(d, (double) DUK_DATE_MSEC_DAY); if (d1 < 0.0) { /* deal with negative values */ d1 += (duk_double_t) DUK_DATE_MSEC_DAY; } d2 = DUK_FLOOR((double) (d / (duk_double_t) DUK_DATE_MSEC_DAY)); DUK_ASSERT(d2 * ((duk_double_t) DUK_DATE_MSEC_DAY) + d1 == d); /* now expected to fit into a 32-bit integer */ t1 = (duk_int_t) d1; t2 = (duk_int_t) d2; day_since_epoch = t2; DUK_ASSERT((duk_double_t) t1 == d1); DUK_ASSERT((duk_double_t) t2 == d2); /* t1 = milliseconds within day (fits 32 bit) * t2 = day number from epoch (fits 32 bit, may be negative) */ parts[DUK_DATE_IDX_MILLISECOND] = t1 % 1000; t1 /= 1000; parts[DUK_DATE_IDX_SECOND] = t1 % 60; t1 /= 60; parts[DUK_DATE_IDX_MINUTE] = t1 % 60; t1 /= 60; parts[DUK_DATE_IDX_HOUR] = t1; DUK_ASSERT(parts[DUK_DATE_IDX_MILLISECOND] >= 0 && parts[DUK_DATE_IDX_MILLISECOND] <= 999); DUK_ASSERT(parts[DUK_DATE_IDX_SECOND] >= 0 && parts[DUK_DATE_IDX_SECOND] <= 59); DUK_ASSERT(parts[DUK_DATE_IDX_MINUTE] >= 0 && parts[DUK_DATE_IDX_MINUTE] <= 59); DUK_ASSERT(parts[DUK_DATE_IDX_HOUR] >= 0 && parts[DUK_DATE_IDX_HOUR] <= 23); DUK_DDD(DUK_DDDPRINT("d=%lf, d1=%lf, d2=%lf, t1=%ld, t2=%ld, parts: hour=%ld min=%ld sec=%ld msec=%ld", (double) d, (double) d1, (double) d2, (long) t1, (long) t2, (long) parts[DUK_DATE_IDX_HOUR], (long) parts[DUK_DATE_IDX_MINUTE], (long) parts[DUK_DATE_IDX_SECOND], (long) parts[DUK_DATE_IDX_MILLISECOND])); /* This assert depends on the input parts representing time inside * the ECMAScript range. */ DUK_ASSERT(t2 + DUK__WEEKDAY_MOD_ADDER >= 0); parts[DUK_DATE_IDX_WEEKDAY] = (t2 + 4 + DUK__WEEKDAY_MOD_ADDER) % 7; /* E5.1 Section 15.9.1.6 */ DUK_ASSERT(parts[DUK_DATE_IDX_WEEKDAY] >= 0 && parts[DUK_DATE_IDX_WEEKDAY] <= 6); year = duk__year_from_day(t2, &day_in_year); day = day_in_year; is_leap = duk_bi_date_is_leap_year(year); for (month = 0; month < 12; month++) { dim = duk__days_in_month[month]; if (month == 1 && is_leap) { dim++; } DUK_DDD(DUK_DDDPRINT("month=%ld, dim=%ld, day=%ld", (long) month, (long) dim, (long) day)); if (day < dim) { break; } day -= dim; } DUK_DDD(DUK_DDDPRINT("final month=%ld", (long) month)); DUK_ASSERT(month >= 0 && month <= 11); DUK_ASSERT(day >= 0 && day <= 31); /* Equivalent year mapping, used to avoid DST trouble when platform * may fail to provide reasonable DST answers for dates outside the * ordinary range (e.g. 1970-2038). An equivalent year has the same * leap-year-ness as the original year and begins on the same weekday * (Jan 1). * * The year 2038 is avoided because there seem to be problems with it * on some platforms. The year 1970 is also avoided as there were * practical problems with it; an equivalent year is used for it too, * which breaks some DST computations for 1970 right now, see e.g. * test-bi-date-tzoffset-brute-fi.js. */ if ((flags & DUK_DATE_FLAG_EQUIVYEAR) && (year < 1971 || year > 2037)) { DUK_ASSERT(is_leap == 0 || is_leap == 1); jan1_since_epoch = day_since_epoch - day_in_year; /* day number for Jan 1 since epoch */ DUK_ASSERT(jan1_since_epoch + DUK__WEEKDAY_MOD_ADDER >= 0); jan1_weekday = (jan1_since_epoch + 4 + DUK__WEEKDAY_MOD_ADDER) % 7; /* E5.1 Section 15.9.1.6 */ DUK_ASSERT(jan1_weekday >= 0 && jan1_weekday <= 6); arridx = jan1_weekday; if (is_leap) { arridx += 7; } DUK_ASSERT(arridx >= 0 && arridx < (duk_small_int_t) (sizeof(duk__date_equivyear) / sizeof(duk_uint8_t))); equiv_year = (duk_int_t) duk__date_equivyear[arridx] + 1970; year = equiv_year; DUK_DDD(DUK_DDDPRINT("equiv year mapping, year=%ld, day_in_year=%ld, day_since_epoch=%ld, " "jan1_since_epoch=%ld, jan1_weekday=%ld -> equiv year %ld", (long) year, (long) day_in_year, (long) day_since_epoch, (long) jan1_since_epoch, (long) jan1_weekday, (long) equiv_year)); } parts[DUK_DATE_IDX_YEAR] = year; parts[DUK_DATE_IDX_MONTH] = month; parts[DUK_DATE_IDX_DAY] = day; if (flags & DUK_DATE_FLAG_ONEBASED) { parts[DUK_DATE_IDX_MONTH]++; /* zero-based -> one-based */ parts[DUK_DATE_IDX_DAY]++; /* -""- */ } if (dparts != NULL) { for (i = 0; i < DUK_DATE_IDX_NUM_PARTS; i++) { dparts[i] = (duk_double_t) parts[i]; } } } /* Compute time value from (double) parts. The parts can be either UTC * or local time; if local, they need to be (conceptually) converted into * UTC time. The parts may represent valid or invalid time, and may be * wildly out of range (but may cancel each other and still come out in * the valid Date range). */ DUK_INTERNAL duk_double_t duk_bi_date_get_timeval_from_dparts(duk_double_t *dparts, duk_small_uint_t flags) { #if defined(DUK_USE_PARANOID_DATE_COMPUTATION) /* See comments below on MakeTime why these are volatile. */ volatile duk_double_t tmp_time; volatile duk_double_t tmp_day; volatile duk_double_t d; #else duk_double_t tmp_time; duk_double_t tmp_day; duk_double_t d; #endif duk_small_uint_t i; duk_int_t tzoff, tzoffprev1, tzoffprev2; /* Expects 'this' at top of stack on entry. */ /* Coerce all finite parts with ToInteger(). ToInteger() must not * be called for NaN/Infinity because it will convert e.g. NaN to * zero. If ToInteger() has already been called, this has no side * effects and is idempotent. * * Don't read dparts[DUK_DATE_IDX_WEEKDAY]; it will cause Valgrind * issues if the value is uninitialized. */ for (i = 0; i <= DUK_DATE_IDX_MILLISECOND; i++) { /* SCANBUILD: scan-build complains here about assigned value * being garbage or undefined. This is correct but operating * on undefined values has no ill effect and is ignored by the * caller in the case where this happens. */ d = dparts[i]; if (DUK_ISFINITE(d)) { dparts[i] = duk_js_tointeger_number(d); } } /* Use explicit steps in computation to try to ensure that * computation happens with intermediate results coerced to * double values (instead of using something more accurate). * E.g. E5.1 Section 15.9.1.11 requires use of IEEE 754 * rules (= ECMAScript '+' and '*' operators). * * Without 'volatile' even this approach fails on some platform * and compiler combinations. For instance, gcc 4.8.1 on Ubuntu * 64-bit, with -m32 and without -std=c99, test-bi-date-canceling.js * would fail because of some optimizations when computing tmp_time * (MakeTime below). Adding 'volatile' to tmp_time solved this * particular problem (annoyingly, also adding debug prints or * running the executable under valgrind hides it). */ /* MakeTime */ tmp_time = 0.0; tmp_time += dparts[DUK_DATE_IDX_HOUR] * ((duk_double_t) DUK_DATE_MSEC_HOUR); tmp_time += dparts[DUK_DATE_IDX_MINUTE] * ((duk_double_t) DUK_DATE_MSEC_MINUTE); tmp_time += dparts[DUK_DATE_IDX_SECOND] * ((duk_double_t) DUK_DATE_MSEC_SECOND); tmp_time += dparts[DUK_DATE_IDX_MILLISECOND]; /* MakeDay */ tmp_day = duk__make_day(dparts[DUK_DATE_IDX_YEAR], dparts[DUK_DATE_IDX_MONTH], dparts[DUK_DATE_IDX_DAY]); /* MakeDate */ d = tmp_day * ((duk_double_t) DUK_DATE_MSEC_DAY) + tmp_time; DUK_DDD(DUK_DDDPRINT("time=%lf day=%lf --> timeval=%lf", (double) tmp_time, (double) tmp_day, (double) d)); /* Optional UTC conversion. */ if (flags & DUK_DATE_FLAG_LOCALTIME) { /* DUK_USE_DATE_GET_LOCAL_TZOFFSET() needs to be called with a * time value computed from UTC parts. At this point we only * have 'd' which is a time value computed from local parts, so * it is off by the UTC-to-local time offset which we don't know * yet. The current solution for computing the UTC-to-local * time offset is to iterate a few times and detect a fixed * point or a two-cycle loop (or a sanity iteration limit), * see test-bi-date-local-parts.js and test-bi-date-tzoffset-basic-fi.js. * * E5.1 Section 15.9.1.9: * UTC(t) = t - LocalTZA - DaylightSavingTA(t - LocalTZA) * * For NaN/inf, DUK_USE_DATE_GET_LOCAL_TZOFFSET() returns 0. */ #if 0 /* Old solution: don't iterate, incorrect */ tzoff = DUK_USE_DATE_GET_LOCAL_TZOFFSET(d); DUK_DDD(DUK_DDDPRINT("tzoffset w/o iteration, tzoff=%ld", (long) tzoff)); d -= tzoff * 1000L; DUK_UNREF(tzoffprev1); DUK_UNREF(tzoffprev2); #endif /* Iteration solution */ tzoff = 0; tzoffprev1 = 999999999L; /* invalid value which never matches */ for (i = 0; i < DUK__LOCAL_TZOFFSET_MAXITER; i++) { tzoffprev2 = tzoffprev1; tzoffprev1 = tzoff; tzoff = DUK_USE_DATE_GET_LOCAL_TZOFFSET(d - tzoff * 1000L); DUK_DDD(DUK_DDDPRINT("tzoffset iteration, i=%d, tzoff=%ld, tzoffprev1=%ld tzoffprev2=%ld", (int) i, (long) tzoff, (long) tzoffprev1, (long) tzoffprev2)); if (tzoff == tzoffprev1) { DUK_DDD(DUK_DDDPRINT("tzoffset iteration finished, i=%d, tzoff=%ld, tzoffprev1=%ld, tzoffprev2=%ld", (int) i, (long) tzoff, (long) tzoffprev1, (long) tzoffprev2)); break; } else if (tzoff == tzoffprev2) { /* Two value cycle, see e.g. test-bi-date-tzoffset-basic-fi.js. * In these cases, favor a higher tzoffset to get a consistent * result which is independent of iteration count. Not sure if * this is a generically correct solution. */ DUK_DDD(DUK_DDDPRINT("tzoffset iteration two-value cycle, i=%d, tzoff=%ld, tzoffprev1=%ld, tzoffprev2=%ld", (int) i, (long) tzoff, (long) tzoffprev1, (long) tzoffprev2)); if (tzoffprev1 > tzoff) { tzoff = tzoffprev1; } break; } } DUK_DDD(DUK_DDDPRINT("tzoffset iteration, tzoff=%ld", (long) tzoff)); d -= tzoff * 1000L; } /* TimeClip(), which also handles Infinity -> NaN conversion */ d = duk__timeclip(d); return d; } /* * API oriented helpers */ /* Push 'this' binding, check that it is a Date object; then push the * internal time value. At the end, stack is: [ ... this timeval ]. * Returns the time value. Local time adjustment is done if requested. */ DUK_LOCAL duk_double_t duk__push_this_get_timeval_tzoffset(duk_hthread *thr, duk_small_uint_t flags, duk_int_t *out_tzoffset) { duk_hobject *h; duk_double_t d; duk_int_t tzoffset = 0; duk_push_this(thr); h = duk_get_hobject(thr, -1); /* XXX: getter with class check, useful in built-ins */ if (h == NULL || DUK_HOBJECT_GET_CLASS_NUMBER(h) != DUK_HOBJECT_CLASS_DATE) { DUK_ERROR_TYPE(thr, "expected Date"); DUK_WO_NORETURN(return 0.0;); } duk_xget_owndataprop_stridx_short(thr, -1, DUK_STRIDX_INT_VALUE); d = duk_to_number_m1(thr); duk_pop(thr); if (DUK_ISNAN(d)) { if (flags & DUK_DATE_FLAG_NAN_TO_ZERO) { d = 0.0; } if (flags & DUK_DATE_FLAG_NAN_TO_RANGE_ERROR) { DUK_ERROR_RANGE(thr, "Invalid Date"); DUK_WO_NORETURN(return 0.0;); } } /* if no NaN handling flag, may still be NaN here, but not Inf */ DUK_ASSERT(!DUK_ISINF(d)); if (flags & DUK_DATE_FLAG_LOCALTIME) { /* Note: DST adjustment is determined using UTC time. * If 'd' is NaN, tzoffset will be 0. */ tzoffset = DUK_USE_DATE_GET_LOCAL_TZOFFSET(d); /* seconds */ d += tzoffset * 1000L; } if (out_tzoffset) { *out_tzoffset = tzoffset; } /* [ ... this ] */ return d; } DUK_LOCAL duk_double_t duk__push_this_get_timeval(duk_hthread *thr, duk_small_uint_t flags) { return duk__push_this_get_timeval_tzoffset(thr, flags, NULL); } /* Set timeval to 'this' from dparts, push the new time value onto the * value stack and return 1 (caller can then tail call us). Expects * the value stack to contain 'this' on the stack top. */ DUK_LOCAL duk_ret_t duk__set_this_timeval_from_dparts(duk_hthread *thr, duk_double_t *dparts, duk_small_uint_t flags) { duk_double_t d; /* [ ... this ] */ d = duk_bi_date_get_timeval_from_dparts(dparts, flags); duk_push_number(thr, d); /* -> [ ... this timeval_new ] */ duk_dup_top(thr); /* -> [ ... this timeval_new timeval_new ] */ /* Must force write because e.g. .setYear() must work even when * the Date instance is frozen. */ duk_xdef_prop_stridx_short(thr, -3, DUK_STRIDX_INT_VALUE, DUK_PROPDESC_FLAGS_W); /* Stack top: new time value, return 1 to allow tail calls. */ return 1; } /* 'out_buf' must be at least DUK_BI_DATE_ISO8601_BUFSIZE long. */ DUK_LOCAL void duk__format_parts_iso8601(duk_int_t *parts, duk_int_t tzoffset, duk_small_uint_t flags, duk_uint8_t *out_buf) { char yearstr[8]; /* "-123456\0" */ char tzstr[8]; /* "+11:22\0" */ char sep = (flags & DUK_DATE_FLAG_SEP_T) ? DUK_ASC_UC_T : DUK_ASC_SPACE; DUK_ASSERT(parts[DUK_DATE_IDX_MONTH] >= 1 && parts[DUK_DATE_IDX_MONTH] <= 12); DUK_ASSERT(parts[DUK_DATE_IDX_DAY] >= 1 && parts[DUK_DATE_IDX_DAY] <= 31); DUK_ASSERT(parts[DUK_DATE_IDX_YEAR] >= -999999 && parts[DUK_DATE_IDX_YEAR] <= 999999); /* Note: %06d for positive value, %07d for negative value to include * sign and 6 digits. */ DUK_SNPRINTF(yearstr, sizeof(yearstr), (parts[DUK_DATE_IDX_YEAR] >= 0 && parts[DUK_DATE_IDX_YEAR] <= 9999) ? "%04ld" : ((parts[DUK_DATE_IDX_YEAR] >= 0) ? "+%06ld" : "%07ld"), (long) parts[DUK_DATE_IDX_YEAR]); yearstr[sizeof(yearstr) - 1] = (char) 0; if (flags & DUK_DATE_FLAG_LOCALTIME) { /* tzoffset seconds are dropped; 16 bits suffice for * time offset in minutes */ const char *fmt; duk_small_int_t tmp, arg_hours, arg_minutes; if (tzoffset >= 0) { tmp = tzoffset; fmt = "+%02d:%02d"; } else { tmp = -tzoffset; fmt = "-%02d:%02d"; } tmp = tmp / 60; arg_hours = tmp / 60; arg_minutes = tmp % 60; DUK_ASSERT(arg_hours <= 24); /* Even less is actually guaranteed for a valid tzoffset. */ arg_hours = arg_hours & 0x3f; /* For [0,24] this is a no-op, but fixes GCC 7 warning, see https://github.com/svaarala/duktape/issues/1602. */ DUK_SNPRINTF(tzstr, sizeof(tzstr), fmt, (int) arg_hours, (int) arg_minutes); tzstr[sizeof(tzstr) - 1] = (char) 0; } else { tzstr[0] = DUK_ASC_UC_Z; tzstr[1] = (char) 0; } /* Unlike year, the other parts fit into 16 bits so %d format * is portable. */ if ((flags & DUK_DATE_FLAG_TOSTRING_DATE) && (flags & DUK_DATE_FLAG_TOSTRING_TIME)) { DUK_SPRINTF((char *) out_buf, "%s-%02d-%02d%c%02d:%02d:%02d.%03d%s", (const char *) yearstr, (int) parts[DUK_DATE_IDX_MONTH], (int) parts[DUK_DATE_IDX_DAY], (int) sep, (int) parts[DUK_DATE_IDX_HOUR], (int) parts[DUK_DATE_IDX_MINUTE], (int) parts[DUK_DATE_IDX_SECOND], (int) parts[DUK_DATE_IDX_MILLISECOND], (const char *) tzstr); } else if (flags & DUK_DATE_FLAG_TOSTRING_DATE) { DUK_SPRINTF((char *) out_buf, "%s-%02d-%02d", (const char *) yearstr, (int) parts[DUK_DATE_IDX_MONTH], (int) parts[DUK_DATE_IDX_DAY]); } else { DUK_ASSERT(flags & DUK_DATE_FLAG_TOSTRING_TIME); DUK_SPRINTF((char *) out_buf, "%02d:%02d:%02d.%03d%s", (int) parts[DUK_DATE_IDX_HOUR], (int) parts[DUK_DATE_IDX_MINUTE], (int) parts[DUK_DATE_IDX_SECOND], (int) parts[DUK_DATE_IDX_MILLISECOND], (const char *) tzstr); } } /* Helper for string conversion calls: check 'this' binding, get the * internal time value, and format date and/or time in a few formats. * Return value allows tail calls. */ DUK_LOCAL duk_ret_t duk__to_string_helper(duk_hthread *thr, duk_small_uint_t flags) { duk_double_t d; duk_int_t parts[DUK_DATE_IDX_NUM_PARTS]; duk_int_t tzoffset; /* seconds, doesn't fit into 16 bits */ duk_bool_t rc; duk_uint8_t buf[DUK_BI_DATE_ISO8601_BUFSIZE]; DUK_UNREF(rc); /* unreferenced with some options */ d = duk__push_this_get_timeval_tzoffset(thr, flags, &tzoffset); if (DUK_ISNAN(d)) { duk_push_hstring_stridx(thr, DUK_STRIDX_INVALID_DATE); return 1; } DUK_ASSERT(DUK_ISFINITE(d)); /* formatters always get one-based month/day-of-month */ duk_bi_date_timeval_to_parts(d, parts, NULL, DUK_DATE_FLAG_ONEBASED); DUK_ASSERT(parts[DUK_DATE_IDX_MONTH] >= 1 && parts[DUK_DATE_IDX_MONTH] <= 12); DUK_ASSERT(parts[DUK_DATE_IDX_DAY] >= 1 && parts[DUK_DATE_IDX_DAY] <= 31); if (flags & DUK_DATE_FLAG_TOSTRING_LOCALE) { /* try locale specific formatter; if it refuses to format the * string, fall back to an ISO 8601 formatted value in local * time. */ #if defined(DUK_USE_DATE_FORMAT_STRING) /* Contract, either: * - Push string to value stack and return 1 * - Don't push anything and return 0 */ rc = DUK_USE_DATE_FORMAT_STRING(thr, parts, tzoffset, flags); if (rc != 0) { return 1; } #else /* No locale specific formatter; this is OK, we fall back * to ISO 8601. */ #endif } /* Different calling convention than above used because the helper * is shared. */ duk__format_parts_iso8601(parts, tzoffset, flags, buf); duk_push_string(thr, (const char *) buf); return 1; } /* Helper for component getter calls: check 'this' binding, get the * internal time value, split it into parts (either as UTC time or * local time), push a specified component as a return value to the * value stack and return 1 (caller can then tail call us). */ DUK_LOCAL duk_ret_t duk__get_part_helper(duk_hthread *thr, duk_small_uint_t flags_and_idx) { duk_double_t d; duk_int_t parts[DUK_DATE_IDX_NUM_PARTS]; duk_small_uint_t idx_part = (duk_small_uint_t) (flags_and_idx >> DUK_DATE_FLAG_VALUE_SHIFT); /* unpack args */ DUK_ASSERT_DISABLE(idx_part >= 0); /* unsigned */ DUK_ASSERT(idx_part < DUK_DATE_IDX_NUM_PARTS); d = duk__push_this_get_timeval(thr, flags_and_idx); if (DUK_ISNAN(d)) { duk_push_nan(thr); return 1; } DUK_ASSERT(DUK_ISFINITE(d)); duk_bi_date_timeval_to_parts(d, parts, NULL, flags_and_idx); /* no need to mask idx portion */ /* Setter APIs detect special year numbers (0...99) and apply a +1900 * only in certain cases. The legacy getYear() getter applies -1900 * unconditionally. */ duk_push_int(thr, (flags_and_idx & DUK_DATE_FLAG_SUB1900) ? parts[idx_part] - 1900 : parts[idx_part]); return 1; } /* Helper for component setter calls: check 'this' binding, get the * internal time value, split it into parts (either as UTC time or * local time), modify one or more components as specified, recompute * the time value, set it as the internal value. Finally, push the * new time value as a return value to the value stack and return 1 * (caller can then tail call us). */ DUK_LOCAL duk_ret_t duk__set_part_helper(duk_hthread *thr, duk_small_uint_t flags_and_maxnargs) { duk_double_t d; duk_int_t parts[DUK_DATE_IDX_NUM_PARTS]; duk_double_t dparts[DUK_DATE_IDX_NUM_PARTS]; duk_idx_t nargs; duk_small_uint_t maxnargs = (duk_small_uint_t) (flags_and_maxnargs >> DUK_DATE_FLAG_VALUE_SHIFT); /* unpack args */ duk_small_uint_t idx_first, idx; duk_small_uint_t i; nargs = duk_get_top(thr); d = duk__push_this_get_timeval(thr, flags_and_maxnargs); DUK_ASSERT(DUK_ISFINITE(d) || DUK_ISNAN(d)); if (DUK_ISFINITE(d)) { duk_bi_date_timeval_to_parts(d, parts, dparts, flags_and_maxnargs); } else { /* NaN timevalue: we need to coerce the arguments, but * the resulting internal timestamp needs to remain NaN. * This works but is not pretty: parts and dparts will * be partially uninitialized, but we only write to them. */ } /* * Determining which datetime components to overwrite based on * stack arguments is a bit complicated, but important to factor * out from setters themselves for compactness. * * If DUK_DATE_FLAG_TIMESETTER, maxnargs indicates setter type: * * 1 -> millisecond * 2 -> second, [millisecond] * 3 -> minute, [second], [millisecond] * 4 -> hour, [minute], [second], [millisecond] * * Else: * * 1 -> date * 2 -> month, [date] * 3 -> year, [month], [date] * * By comparing nargs and maxnargs (and flags) we know which * components to override. We rely on part index ordering. */ if (flags_and_maxnargs & DUK_DATE_FLAG_TIMESETTER) { DUK_ASSERT(maxnargs >= 1 && maxnargs <= 4); idx_first = DUK_DATE_IDX_MILLISECOND - (maxnargs - 1); } else { DUK_ASSERT(maxnargs >= 1 && maxnargs <= 3); idx_first = DUK_DATE_IDX_DAY - (maxnargs - 1); } DUK_ASSERT_DISABLE(idx_first >= 0); /* unsigned */ DUK_ASSERT(idx_first < DUK_DATE_IDX_NUM_PARTS); for (i = 0; i < maxnargs; i++) { if ((duk_idx_t) i >= nargs) { /* no argument given -> leave components untouched */ break; } idx = idx_first + i; DUK_ASSERT_DISABLE(idx >= 0); /* unsigned */ DUK_ASSERT(idx < DUK_DATE_IDX_NUM_PARTS); if (idx == DUK_DATE_IDX_YEAR && (flags_and_maxnargs & DUK_DATE_FLAG_YEAR_FIXUP)) { duk__twodigit_year_fixup(thr, (duk_idx_t) i); } dparts[idx] = duk_to_number(thr, (duk_idx_t) i); if (idx == DUK_DATE_IDX_DAY) { /* Day-of-month is one-based in the API, but zero-based * internally, so fix here. Note that month is zero-based * both in the API and internally. */ /* SCANBUILD: complains about use of uninitialized values. * The complaint is correct, but operating in undefined * values here is intentional in some cases and the caller * ignores the results. */ dparts[idx] -= 1.0; } } /* Leaves new timevalue on stack top and returns 1, which is correct * for part setters. */ if (DUK_ISFINITE(d)) { return duk__set_this_timeval_from_dparts(thr, dparts, flags_and_maxnargs); } else { /* Internal timevalue is already NaN, so don't touch it. */ duk_push_nan(thr); return 1; } } /* Apply ToNumber() to specified index; if ToInteger(val) in [0,99], add * 1900 and replace value at idx_val. */ DUK_LOCAL void duk__twodigit_year_fixup(duk_hthread *thr, duk_idx_t idx_val) { duk_double_t d; /* XXX: idx_val would fit into 16 bits, but using duk_small_uint_t * might not generate better code due to casting. */ /* E5 Sections 15.9.3.1, B.2.4, B.2.5 */ duk_to_number(thr, idx_val); if (duk_is_nan(thr, idx_val)) { return; } duk_dup(thr, idx_val); duk_to_int(thr, -1); d = duk_get_number(thr, -1); /* get as double to handle huge numbers correctly */ if (d >= 0.0 && d <= 99.0) { d += 1900.0; duk_push_number(thr, d); duk_replace(thr, idx_val); } duk_pop(thr); } /* Set datetime parts from stack arguments, defaulting any missing values. * Day-of-week is not set; it is not required when setting the time value. */ DUK_LOCAL void duk__set_parts_from_args(duk_hthread *thr, duk_double_t *dparts, duk_idx_t nargs) { duk_double_t d; duk_small_uint_t i; duk_small_uint_t idx; /* Causes a ToNumber() coercion, but doesn't break coercion order since * year is coerced first anyway. */ duk__twodigit_year_fixup(thr, 0); /* There are at most 7 args, but we use 8 here so that also * DUK_DATE_IDX_WEEKDAY gets initialized (to zero) to avoid the potential * for any Valgrind gripes later. */ for (i = 0; i < 8; i++) { /* Note: rely on index ordering */ idx = DUK_DATE_IDX_YEAR + i; if ((duk_idx_t) i < nargs) { d = duk_to_number(thr, (duk_idx_t) i); if (idx == DUK_DATE_IDX_DAY) { /* Convert day from one-based to zero-based (internal). This may * cause the day part to be negative, which is OK. */ d -= 1.0; } } else { /* All components default to 0 except day-of-month which defaults * to 1. However, because our internal day-of-month is zero-based, * it also defaults to zero here. */ d = 0.0; } dparts[idx] = d; } DUK_DDD(DUK_DDDPRINT("parts from args -> %lf %lf %lf %lf %lf %lf %lf %lf", (double) dparts[0], (double) dparts[1], (double) dparts[2], (double) dparts[3], (double) dparts[4], (double) dparts[5], (double) dparts[6], (double) dparts[7])); } /* * Indirect magic value lookup for Date methods. * * Date methods don't put their control flags into the function magic value * because they wouldn't fit into a LIGHTFUNC's magic field. Instead, the * magic value is set to an index pointing to the array of control flags * below. * * This must be kept in strict sync with genbuiltins.py! */ static duk_uint16_t duk__date_magics[] = { /* 0: toString */ DUK_DATE_FLAG_TOSTRING_DATE + DUK_DATE_FLAG_TOSTRING_TIME + DUK_DATE_FLAG_LOCALTIME, /* 1: toDateString */ DUK_DATE_FLAG_TOSTRING_DATE + DUK_DATE_FLAG_LOCALTIME, /* 2: toTimeString */ DUK_DATE_FLAG_TOSTRING_TIME + DUK_DATE_FLAG_LOCALTIME, /* 3: toLocaleString */ DUK_DATE_FLAG_TOSTRING_DATE + DUK_DATE_FLAG_TOSTRING_TIME + DUK_DATE_FLAG_TOSTRING_LOCALE + DUK_DATE_FLAG_LOCALTIME, /* 4: toLocaleDateString */ DUK_DATE_FLAG_TOSTRING_DATE + DUK_DATE_FLAG_TOSTRING_LOCALE + DUK_DATE_FLAG_LOCALTIME, /* 5: toLocaleTimeString */ DUK_DATE_FLAG_TOSTRING_TIME + DUK_DATE_FLAG_TOSTRING_LOCALE + DUK_DATE_FLAG_LOCALTIME, /* 6: toUTCString */ DUK_DATE_FLAG_TOSTRING_DATE + DUK_DATE_FLAG_TOSTRING_TIME, /* 7: toISOString */ DUK_DATE_FLAG_TOSTRING_DATE + DUK_DATE_FLAG_TOSTRING_TIME + DUK_DATE_FLAG_NAN_TO_RANGE_ERROR + DUK_DATE_FLAG_SEP_T, /* 8: getFullYear */ DUK_DATE_FLAG_LOCALTIME + (DUK_DATE_IDX_YEAR << DUK_DATE_FLAG_VALUE_SHIFT), /* 9: getUTCFullYear */ 0 + (DUK_DATE_IDX_YEAR << DUK_DATE_FLAG_VALUE_SHIFT), /* 10: getMonth */ DUK_DATE_FLAG_LOCALTIME + (DUK_DATE_IDX_MONTH << DUK_DATE_FLAG_VALUE_SHIFT), /* 11: getUTCMonth */ 0 + (DUK_DATE_IDX_MONTH << DUK_DATE_FLAG_VALUE_SHIFT), /* 12: getDate */ DUK_DATE_FLAG_ONEBASED + DUK_DATE_FLAG_LOCALTIME + (DUK_DATE_IDX_DAY << DUK_DATE_FLAG_VALUE_SHIFT), /* 13: getUTCDate */ DUK_DATE_FLAG_ONEBASED + (DUK_DATE_IDX_DAY << DUK_DATE_FLAG_VALUE_SHIFT), /* 14: getDay */ DUK_DATE_FLAG_LOCALTIME + (DUK_DATE_IDX_WEEKDAY << DUK_DATE_FLAG_VALUE_SHIFT), /* 15: getUTCDay */ 0 + (DUK_DATE_IDX_WEEKDAY << DUK_DATE_FLAG_VALUE_SHIFT), /* 16: getHours */ DUK_DATE_FLAG_LOCALTIME + (DUK_DATE_IDX_HOUR << DUK_DATE_FLAG_VALUE_SHIFT), /* 17: getUTCHours */ 0 + (DUK_DATE_IDX_HOUR << DUK_DATE_FLAG_VALUE_SHIFT), /* 18: getMinutes */ DUK_DATE_FLAG_LOCALTIME + (DUK_DATE_IDX_MINUTE << DUK_DATE_FLAG_VALUE_SHIFT), /* 19: getUTCMinutes */ 0 + (DUK_DATE_IDX_MINUTE << DUK_DATE_FLAG_VALUE_SHIFT), /* 20: getSeconds */ DUK_DATE_FLAG_LOCALTIME + (DUK_DATE_IDX_SECOND << DUK_DATE_FLAG_VALUE_SHIFT), /* 21: getUTCSeconds */ 0 + (DUK_DATE_IDX_SECOND << DUK_DATE_FLAG_VALUE_SHIFT), /* 22: getMilliseconds */ DUK_DATE_FLAG_LOCALTIME + (DUK_DATE_IDX_MILLISECOND << DUK_DATE_FLAG_VALUE_SHIFT), /* 23: getUTCMilliseconds */ 0 + (DUK_DATE_IDX_MILLISECOND << DUK_DATE_FLAG_VALUE_SHIFT), /* 24: setMilliseconds */ DUK_DATE_FLAG_TIMESETTER + DUK_DATE_FLAG_LOCALTIME + (1 << DUK_DATE_FLAG_VALUE_SHIFT), /* 25: setUTCMilliseconds */ DUK_DATE_FLAG_TIMESETTER + (1 << DUK_DATE_FLAG_VALUE_SHIFT), /* 26: setSeconds */ DUK_DATE_FLAG_TIMESETTER + DUK_DATE_FLAG_LOCALTIME + (2 << DUK_DATE_FLAG_VALUE_SHIFT), /* 27: setUTCSeconds */ DUK_DATE_FLAG_TIMESETTER + (2 << DUK_DATE_FLAG_VALUE_SHIFT), /* 28: setMinutes */ DUK_DATE_FLAG_TIMESETTER + DUK_DATE_FLAG_LOCALTIME + (3 << DUK_DATE_FLAG_VALUE_SHIFT), /* 29: setUTCMinutes */ DUK_DATE_FLAG_TIMESETTER + (3 << DUK_DATE_FLAG_VALUE_SHIFT), /* 30: setHours */ DUK_DATE_FLAG_TIMESETTER + DUK_DATE_FLAG_LOCALTIME + (4 << DUK_DATE_FLAG_VALUE_SHIFT), /* 31: setUTCHours */ DUK_DATE_FLAG_TIMESETTER + (4 << DUK_DATE_FLAG_VALUE_SHIFT), /* 32: setDate */ DUK_DATE_FLAG_LOCALTIME + (1 << DUK_DATE_FLAG_VALUE_SHIFT), /* 33: setUTCDate */ 0 + (1 << DUK_DATE_FLAG_VALUE_SHIFT), /* 34: setMonth */ DUK_DATE_FLAG_LOCALTIME + (2 << DUK_DATE_FLAG_VALUE_SHIFT), /* 35: setUTCMonth */ 0 + (2 << DUK_DATE_FLAG_VALUE_SHIFT), /* 36: setFullYear */ DUK_DATE_FLAG_NAN_TO_ZERO + DUK_DATE_FLAG_LOCALTIME + (3 << DUK_DATE_FLAG_VALUE_SHIFT), /* 37: setUTCFullYear */ DUK_DATE_FLAG_NAN_TO_ZERO + (3 << DUK_DATE_FLAG_VALUE_SHIFT), /* 38: getYear */ DUK_DATE_FLAG_LOCALTIME + DUK_DATE_FLAG_SUB1900 + (DUK_DATE_IDX_YEAR << DUK_DATE_FLAG_VALUE_SHIFT), /* 39: setYear */ DUK_DATE_FLAG_NAN_TO_ZERO + DUK_DATE_FLAG_YEAR_FIXUP + (3 << DUK_DATE_FLAG_VALUE_SHIFT), }; DUK_LOCAL duk_small_uint_t duk__date_get_indirect_magic(duk_hthread *thr) { duk_small_uint_t magicidx = (duk_small_uint_t) duk_get_current_magic(thr); DUK_ASSERT(magicidx < (duk_small_int_t) (sizeof(duk__date_magics) / sizeof(duk_uint16_t))); return (duk_small_uint_t) duk__date_magics[magicidx]; } #if defined(DUK_USE_DATE_BUILTIN) /* * Constructor calls */ DUK_INTERNAL duk_ret_t duk_bi_date_constructor(duk_hthread *thr) { duk_idx_t nargs = duk_get_top(thr); duk_bool_t is_cons = duk_is_constructor_call(thr); duk_double_t dparts[DUK_DATE_IDX_NUM_PARTS]; duk_double_t d; DUK_DDD(DUK_DDDPRINT("Date constructor, nargs=%ld, is_cons=%ld", (long) nargs, (long) is_cons)); (void) duk_push_object_helper(thr, DUK_HOBJECT_FLAG_EXTENSIBLE | DUK_HOBJECT_FLAG_FASTREFS | DUK_HOBJECT_CLASS_AS_FLAGS(DUK_HOBJECT_CLASS_DATE), DUK_BIDX_DATE_PROTOTYPE); /* Unlike most built-ins, the internal [[PrimitiveValue]] of a Date * is mutable. */ if (nargs == 0 || !is_cons) { d = duk__timeclip(duk_time_get_ecmascript_time_nofrac(thr)); duk_push_number(thr, d); duk_xdef_prop_stridx_short(thr, -2, DUK_STRIDX_INT_VALUE, DUK_PROPDESC_FLAGS_W); if (!is_cons) { /* called as a normal function: return new Date().toString() */ duk_to_string(thr, -1); } return 1; } else if (nargs == 1) { const char *str; duk_to_primitive(thr, 0, DUK_HINT_NONE); str = duk_get_string_notsymbol(thr, 0); if (str) { duk__parse_string(thr, str); duk_replace(thr, 0); /* may be NaN */ } d = duk__timeclip(duk_to_number(thr, 0)); /* symbols fail here */ duk_push_number(thr, d); duk_xdef_prop_stridx_short(thr, -2, DUK_STRIDX_INT_VALUE, DUK_PROPDESC_FLAGS_W); return 1; } duk__set_parts_from_args(thr, dparts, nargs); /* Parts are in local time, convert when setting. */ (void) duk__set_this_timeval_from_dparts(thr, dparts, DUK_DATE_FLAG_LOCALTIME /*flags*/); /* -> [ ... this timeval ] */ duk_pop(thr); /* -> [ ... this ] */ return 1; } DUK_INTERNAL duk_ret_t duk_bi_date_constructor_parse(duk_hthread *thr) { return duk__parse_string(thr, duk_to_string(thr, 0)); } DUK_INTERNAL duk_ret_t duk_bi_date_constructor_utc(duk_hthread *thr) { duk_idx_t nargs = duk_get_top(thr); duk_double_t dparts[DUK_DATE_IDX_NUM_PARTS]; duk_double_t d; /* Behavior for nargs < 2 is implementation dependent: currently we'll * set a NaN time value (matching V8 behavior) in this case. */ if (nargs < 2) { duk_push_nan(thr); } else { duk__set_parts_from_args(thr, dparts, nargs); d = duk_bi_date_get_timeval_from_dparts(dparts, 0 /*flags*/); duk_push_number(thr, d); } return 1; } DUK_INTERNAL duk_ret_t duk_bi_date_constructor_now(duk_hthread *thr) { duk_double_t d; d = duk_time_get_ecmascript_time_nofrac(thr); DUK_ASSERT(duk__timeclip(d) == d); /* TimeClip() should never be necessary */ duk_push_number(thr, d); return 1; } /* * String/JSON conversions * * Human readable conversions are now basically ISO 8601 with a space * (instead of 'T') as the date/time separator. This is a good baseline * and is platform independent. * * A shared native helper to provide many conversions. Magic value contains * a set of flags. The helper provides: * * toString() * toDateString() * toTimeString() * toLocaleString() * toLocaleDateString() * toLocaleTimeString() * toUTCString() * toISOString() * * Notes: * * - Date.prototype.toGMTString() and Date.prototype.toUTCString() are * required to be the same ECMAScript function object (!), so it is * omitted from here. * * - Date.prototype.toUTCString(): E5.1 specification does not require a * specific format, but result should be human readable. The * specification suggests using ISO 8601 format with a space (instead * of 'T') separator if a more human readable format is not available. * * - Date.prototype.toISOString(): unlike other conversion functions, * toISOString() requires a RangeError for invalid date values. */ DUK_INTERNAL duk_ret_t duk_bi_date_prototype_tostring_shared(duk_hthread *thr) { duk_small_uint_t flags = duk__date_get_indirect_magic(thr); return duk__to_string_helper(thr, flags); } DUK_INTERNAL duk_ret_t duk_bi_date_prototype_value_of(duk_hthread *thr) { /* This native function is also used for Date.prototype.getTime() * as their behavior is identical. */ duk_double_t d = duk__push_this_get_timeval(thr, 0 /*flags*/); /* -> [ this ] */ DUK_ASSERT(DUK_ISFINITE(d) || DUK_ISNAN(d)); duk_push_number(thr, d); return 1; } DUK_INTERNAL duk_ret_t duk_bi_date_prototype_to_json(duk_hthread *thr) { /* Note: toJSON() is a generic function which works even if 'this' * is not a Date. The sole argument is ignored. */ duk_push_this(thr); duk_to_object(thr, -1); duk_dup_top(thr); duk_to_primitive(thr, -1, DUK_HINT_NUMBER); if (duk_is_number(thr, -1)) { duk_double_t d = duk_get_number(thr, -1); if (!DUK_ISFINITE(d)) { duk_push_null(thr); return 1; } } duk_pop(thr); duk_get_prop_stridx_short(thr, -1, DUK_STRIDX_TO_ISO_STRING); duk_dup_m2(thr); /* -> [ O toIsoString O ] */ duk_call_method(thr, 0); return 1; } /* * Getters. * * Implementing getters is quite easy. The internal time value is either * NaN, or represents milliseconds (without fractions) from Jan 1, 1970. * The internal time value can be converted to integer parts, and each * part will be normalized and will fit into a 32-bit signed integer. * * A shared native helper to provide all getters. Magic value contains * a set of flags and also packs the date component index argument. The * helper provides: * * getFullYear() * getUTCFullYear() * getMonth() * getUTCMonth() * getDate() * getUTCDate() * getDay() * getUTCDay() * getHours() * getUTCHours() * getMinutes() * getUTCMinutes() * getSeconds() * getUTCSeconds() * getMilliseconds() * getUTCMilliseconds() * getYear() * * Notes: * * - Date.prototype.getDate(): 'date' means day-of-month, and is * zero-based in internal calculations but public API expects it to * be one-based. * * - Date.prototype.getTime() and Date.prototype.valueOf() have identical * behavior. They have separate function objects, but share the same C * function (duk_bi_date_prototype_value_of). */ DUK_INTERNAL duk_ret_t duk_bi_date_prototype_get_shared(duk_hthread *thr) { duk_small_uint_t flags_and_idx = duk__date_get_indirect_magic(thr); return duk__get_part_helper(thr, flags_and_idx); } DUK_INTERNAL duk_ret_t duk_bi_date_prototype_get_timezone_offset(duk_hthread *thr) { /* * Return (t - LocalTime(t)) in minutes: * * t - LocalTime(t) = t - (t + LocalTZA + DaylightSavingTA(t)) * = -(LocalTZA + DaylightSavingTA(t)) * * where DaylightSavingTA() is checked for time 't'. * * Note that the sign of the result is opposite to common usage, * e.g. for EE(S)T which normally is +2h or +3h from UTC, this * function returns -120 or -180. * */ duk_double_t d; duk_int_t tzoffset; /* Note: DST adjustment is determined using UTC time. */ d = duk__push_this_get_timeval(thr, 0 /*flags*/); DUK_ASSERT(DUK_ISFINITE(d) || DUK_ISNAN(d)); if (DUK_ISNAN(d)) { duk_push_nan(thr); } else { DUK_ASSERT(DUK_ISFINITE(d)); tzoffset = DUK_USE_DATE_GET_LOCAL_TZOFFSET(d); duk_push_int(thr, -tzoffset / 60); } return 1; } /* * Setters. * * Setters are a bit more complicated than getters. Component setters * break down the current time value into its (normalized) component * parts, replace one or more components with -unnormalized- new values, * and the components are then converted back into a time value. As an * example of using unnormalized values: * * var d = new Date(1234567890); * * is equivalent to: * * var d = new Date(0); * d.setUTCMilliseconds(1234567890); * * A shared native helper to provide almost all setters. Magic value * contains a set of flags and also packs the "maxnargs" argument. The * helper provides: * * setMilliseconds() * setUTCMilliseconds() * setSeconds() * setUTCSeconds() * setMinutes() * setUTCMinutes() * setHours() * setUTCHours() * setDate() * setUTCDate() * setMonth() * setUTCMonth() * setFullYear() * setUTCFullYear() * setYear() * * Notes: * * - Date.prototype.setYear() (Section B addition): special year check * is omitted. NaN / Infinity will just flow through and ultimately * result in a NaN internal time value. * * - Date.prototype.setYear() does not have optional arguments for * setting month and day-in-month (like setFullYear()), but we indicate * 'maxnargs' to be 3 to get the year written to the correct component * index in duk__set_part_helper(). The function has nargs == 1, so only * the year will be set regardless of actual argument count. */ DUK_INTERNAL duk_ret_t duk_bi_date_prototype_set_shared(duk_hthread *thr) { duk_small_uint_t flags_and_maxnargs = duk__date_get_indirect_magic(thr); return duk__set_part_helper(thr, flags_and_maxnargs); } DUK_INTERNAL duk_ret_t duk_bi_date_prototype_set_time(duk_hthread *thr) { duk_double_t d; (void) duk__push_this_get_timeval(thr, 0 /*flags*/); /* -> [ timeval this ] */ d = duk__timeclip(duk_to_number(thr, 0)); duk_push_number(thr, d); duk_dup_top(thr); /* Must force write because .setTime() must work even when * the Date instance is frozen. */ duk_xdef_prop_stridx_short(thr, -3, DUK_STRIDX_INT_VALUE, DUK_PROPDESC_FLAGS_W); /* -> [ timeval this timeval ] */ return 1; } /* * Misc. */ #if defined(DUK_USE_SYMBOL_BUILTIN) DUK_INTERNAL duk_ret_t duk_bi_date_prototype_toprimitive(duk_hthread *thr) { duk_size_t hintlen; const char *hintstr; duk_int_t hint; /* Invokes OrdinaryToPrimitive() with suitable hint. Note that the * method is generic, and works on non-Date arguments too. * * https://www.ecma-international.org/ecma-262/6.0/#sec-date.prototype-@@toprimitive */ duk_push_this(thr); duk_require_object(thr, -1); DUK_ASSERT_TOP(thr, 2); hintstr = duk_require_lstring(thr, 0, &hintlen); if ((hintlen == 6 && DUK_STRCMP(hintstr, "string") == 0) || (hintlen == 7 && DUK_STRCMP(hintstr, "default") == 0)) { hint = DUK_HINT_STRING; } else if (hintlen == 6 && DUK_STRCMP(hintstr, "number") == 0) { hint = DUK_HINT_NUMBER; } else { DUK_DCERROR_TYPE_INVALID_ARGS(thr); } duk_to_primitive_ordinary(thr, -1, hint); return 1; } #endif /* DUK_USE_SYMBOL_BUILTIN */ #endif /* DUK_USE_DATE_BUILTIN */