/*
 * Copyright (c) 2015, Texas Instruments Incorporated
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * *  Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * *  Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * *  Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
/** ============================================================================
 *  @file       UARTUtils.h
 *
 *  @brief      UART related utilities
 *
 *  The UARTUtils header file should be included in an application as follows:
 *  @code
 *  #include <UARTUtils.h>
 *  @endcode
 *
 *  ============================================================================
 */

#ifndef __UARTUtils_H
#define __UARTUtils_H

#ifdef __cplusplus
extern "C" {
#endif

#include <xdc/std.h>

#include <stdio.h>

#if defined(__TI_COMPILER_VERSION__)
#include <file.h>
#endif

/*!
 *  @brief  Open the UART to be used with LoggerIdle
 *
 *  This function opens the UART to be used by the LoggerIdle plugged function.
 *
 *  @param      index UART to use for LoggerIdle's send function from the ports
 *                    array. Matches the same number uart base (0 -> UART_BASE0).
 */
extern void UARTUtils_loggerIdleInit(unsigned int index);

/*!
 *  @brief  Sends Log data out the UART
 *
 *  This function should not be called directly, it will be called by the
 *  LoggerIdle module during Idle.
 *
 *  @param    a    Pointer to unsigned char buffer
 *  @param    len  length of unsigned char buffer
 *  @return        Number of bytes sent
 *
 *  To configure LoggerIdle to upload via UART in the .cfg:
 *  @code
 *  var LoggingSetup = xdc.useModule('ti.uia.sysbios.LoggingSetup');
 *  LoggingSetup.loggerType = LoggingSetup.UploadMode_IDLE;
 *  var LoggerIdle = xdc.useModule('ti.uia.sysbios.LoggerIdle');
 *  LoggerIdle.transportFxn = "&UARTUtils_loggerIdleSend";
 *  LoggerIdle.transportType = LoggerIdle.TransportType_UART;
 *  @endcode
 *
 */
extern Int UARTUtils_loggerIdleSend(UChar *a, Int len);

/*!
 *  @brief   close function for add_device rts function
 *
 *  This function should not be called directly
 */
extern int UARTUtils_deviceclose(int fd);

/*!
 *  @brief   seek function for add_device rts function
 *
 *  This function should not be called directly
 */
extern off_t UARTUtils_devicelseek(int fd, off_t offset, int origin);

/*!
 *  @brief   open function for add_device rts function
 *
 *  This function should not be called directly
 */
extern int UARTUtils_deviceopen(const char *path, unsigned flags, int mode);

/*!
 *  @brief   read function for add_device rts function
 *
 *  This function should not be called directly
 */
extern int UARTUtils_deviceread(int fd, char *buffer, unsigned size);

/*!
 *  @brief   rename function for add_device rts function
 *
 *  This function should not be called directly
 */
extern int UARTUtils_devicerename(const char *old_name, const char *new_name);

/*!
 *  @brief   unlink function for add_device rts function
 *
 *  This function should not be called directly
 */
extern int UARTUtils_deviceunlink(const char *path);

/*!
 *  @brief   write function for add_device rts function
 *
 *  This function should not be called directly
 */
extern int UARTUtils_devicewrite(int fd, const char *buffer, unsigned size);

/*!
 *  @brief   abort function called within System_abort
 *
 *  This function should not be called directly
 */
extern Void UARTUtils_systemAbort(String str);

/*!
 *  @brief  Opens the UART to be used with SysCallback
 *
 *  This function opens the UART to be used by the SysCallback plugged functions.
 *
 *  @param      index UART to use for System output from ports array. Matches the
 *                    same number uart base (0 -> UART_BASE0).
 */
extern void UARTUtils_systemInit(unsigned int index);

/*!
 *  @brief   putch function for System_printf
 *
 *  This function should not be called directly
 */
extern Void UARTUtils_systemPutch(Char a);

/*!
 *  @brief   ready function for System module
 *
 *  This function should not be called directly
 */
extern Bool UARTUtils_systemReady();

#ifdef __cplusplus
}
#endif

#endif /* __UARTUtils_H */