#ifndef CONTROLCAN_H
#define CONTROLCAN_H

////文件版本：v2.02 20190609
//接口卡类型定义

#define VCI_USBCAN1		3
#define VCI_USBCAN2		4
#define VCI_USBCAN2A		4

#define VCI_USBCAN_E_U 		20
#define VCI_USBCAN_2E_U 	21

//函数调用返回状态值
#define	STATUS_OK					1
#define STATUS_ERR					0
	
#define USHORT unsigned short int
#define BYTE unsigned char
#define CHAR char
#define UCHAR unsigned char
#define UINT unsigned int
#define DWORD unsigned int
#define PVOID void*
#define ULONG unsigned int
#define INT int
#define UINT32 UINT
#define LPVOID void*
#define BOOL BYTE
#define TRUE 1
#define FALSE 0

//1.ZLGCAN系列接口卡信息的数据类型。
typedef  struct  _VCI_BOARD_INFO{
		USHORT	hw_Version;
		USHORT	fw_Version;
		USHORT	dr_Version;
		USHORT	in_Version;
		USHORT	irq_Num;
		BYTE	can_Num;
		CHAR	str_Serial_Num[20];
		CHAR	str_hw_Type[40];
		USHORT	Reserved[4];
} VCI_BOARD_INFO,*PVCI_BOARD_INFO; 

//2.定义CAN信息帧的数据类型。
typedef  struct  _VCI_CAN_OBJ{
	UINT	ID;
	UINT	TimeStamp;
	BYTE	TimeFlag;
	BYTE	SendType;
	BYTE	RemoteFlag;//是否是远程帧
	BYTE	ExternFlag;//是否是扩展帧
	BYTE	DataLen;
	BYTE	Data[8];
	BYTE	Reserved[3];
}VCI_CAN_OBJ,*PVCI_CAN_OBJ;

//3.定义初始化CAN的数据类型
typedef struct _INIT_CONFIG{
	DWORD	AccCode;
	DWORD	AccMask;
	DWORD	Reserved;
	UCHAR	Filter;
	UCHAR	Timing0;	
	UCHAR	Timing1;	
	UCHAR	Mode;
}VCI_INIT_CONFIG,*PVCI_INIT_CONFIG;

///////// new add struct for filter /////////
typedef struct _VCI_FILTER_RECORD{
	DWORD ExtFrame;	//是否为扩展帧
	DWORD Start;
	DWORD End;
}VCI_FILTER_RECORD,*PVCI_FILTER_RECORD;

#ifdef __cplusplus
#define EXTERN_C  extern "C"
#else
#define EXTERN_C
#endif

EXTERN_C DWORD VCI_OpenDevice(DWORD DeviceType,DWORD DeviceInd,DWORD Reserved);
EXTERN_C DWORD VCI_CloseDevice(DWORD DeviceType,DWORD DeviceInd);
EXTERN_C DWORD VCI_InitCAN(DWORD DeviceType, DWORD DeviceInd, DWORD CANInd, PVCI_INIT_CONFIG pInitConfig);

EXTERN_C DWORD VCI_ReadBoardInfo(DWORD DeviceType,DWORD DeviceInd,PVCI_BOARD_INFO pInfo);

EXTERN_C DWORD VCI_SetReference(DWORD DeviceType,DWORD DeviceInd,DWORD CANInd,DWORD RefType,PVOID pData);

EXTERN_C ULONG VCI_GetReceiveNum(DWORD DeviceType,DWORD DeviceInd,DWORD CANInd);
EXTERN_C DWORD VCI_ClearBuffer(DWORD DeviceType,DWORD DeviceInd,DWORD CANInd);

EXTERN_C DWORD VCI_StartCAN(DWORD DeviceType,DWORD DeviceInd,DWORD CANInd);
EXTERN_C DWORD VCI_ResetCAN(DWORD DeviceType,DWORD DeviceInd,DWORD CANInd);

EXTERN_C ULONG VCI_Transmit(DWORD DeviceType,DWORD DeviceInd,DWORD CANInd,PVCI_CAN_OBJ pSend,UINT Len);
EXTERN_C ULONG VCI_Receive(DWORD DeviceType,DWORD DeviceInd,DWORD CANInd,PVCI_CAN_OBJ pReceive,UINT Len,INT WaitTime);

EXTERN_C DWORD  VCI_UsbDeviceReset(DWORD DevType,DWORD DevIndex,DWORD Reserved);
EXTERN_C DWORD  VCI_FindUsbDevice2(PVCI_BOARD_INFO pInfo);

#endif