/*
 * Main.c
 *
 *  Created on: 16 juli 2021
 *      Author: Daniel Mårtensson
 */

#include <stdio.h>

 /* Include Open SAE J1939 */
#include "Open_SAE_J1939/Open_SAE_J1939.h"

/* Include ISO 11783 */
#include "ISO_11783/ISO_11783-7_Application_Layer/Application_Layer.h"

void Callback_Function_Send(uint32_t ID, uint8_t DLC, uint8_t data[]) {
	/* Apply your transmit layer here, e.g:
	 * uint32_t TxMailbox;
	 * static CAN_HandleTypeDef can_handler;
	 * This function transmit ID, DLC and data[] as the CAN-message.
	 * HardWareLayerCAN_TX(&can_handler, ID, DLC, data, &TxMailbox);
	 *
	 * You can use TCP/IP, USB, CAN etc. as hardware layers for SAE J1939
	 */
}

void Callback_Function_Read(uint32_t* ID, uint8_t data[], bool* is_new_data) {
	/* Apply your receive layer here, e.g:
	 * CAN_RxHeaderTypeDef rxHeader = {0};
	 * static CAN_HandleTypeDef can_handler;
	 * This function read CAN RX and give the data to ID and data[] as the CAN-message.
	 * if (HardWareLayerCAN_RX(can_handler, &rxHeader, ID, data) == STATUS_OK){
	 *	*is_new_data = true;
	 * }
	 *
	 * You can use TCP/IP, USB, CAN etc. as hardware layers for SAE J1939
	 */
}

/* This function reads the CAN traffic */
void Callback_Function_Traffic(uint32_t ID, uint8_t DLC, uint8_t data[], bool is_TX) {
	/* Print if it is TX or RX */
	printf("%s\t", is_TX ? "TX" : "RX");

	/* Print ID as hex */
	printf("%08X\t", ID);

	/* Print the data */
	uint8_t i;
	for (i = 0U; i < DLC; i++) {
		printf("%X\t", data[i]);
	}

	/* Print the non-data */
	for (i = DLC; i < 8U; i++) {
		printf("%X\t", 0U);
	}

	/* New line */
	printf("\n");
}

/* Apply your delay here */
void Callback_Function_Delay(uint8_t delay){
	/* Place your hardware delay here e.g HAL_Delay(delay); for STM32 */
}

int main() {

	/* Create our J1939 structure */
	J1939 j1939 = { 0 };

	/*
	 * Callbacks can be used if you want to pass a specific CAN-function into the hardware layer.
	 * All you need to do is to enable INTERNAL_CALLLBACK inside hardware.h
	 * If you don't want to have the traffic callback, just set the argument as NULL.
	 * If you don't want any callback at all, you can write your own hardware layer by selecting a specific processor choice at hardware.h
	 */
	CAN_Set_Callback_Functions(Callback_Function_Send, Callback_Function_Read, Callback_Function_Traffic, Callback_Function_Delay);

	/* Load your ECU information */
	Open_SAE_J1939_Startup_ECU(&j1939);

	/* SAE J1939 process */
	bool run = true;
	while (run) {
		/* Read incoming messages */
		Open_SAE_J1939_Listen_For_Messages(&j1939);

		/* Your application code here */

	}

	/* Save your ECU information */
	Open_SAE_J1939_Closedown_ECU(&j1939);

	return 0;
}