Package: acpi-support-base Status: deinstall ok config-files Priority: optional Section: admin Installed-Size: 43 Maintainer: Debian Acpi Team Architecture: all Source: acpi-support Version: 0.142-8 Config-Version: 0.142-8 Replaces: acpi-support (<< 0.109-1) Depends: acpid (>= 1.0.4) Suggests: acpi-support, consolekit Conffiles: /etc/acpi/events/powerbtn-acpi-support 6d7b29590b83666f56d2cac27c06c18b /etc/acpi/powerbtn-acpi-support.sh f13615cfa8c981395c26e18d55936bb1 Description: scripts for handling base ACPI events such as the power button This package contains scripts to react to various base ACPI events such as the power button. For more extensive ACPI support, including support for suspend-to-RAM and for various laptop features, install the package "acpi-support". Package: acpid Status: install ok installed Priority: optional Section: admin Installed-Size: 146 Maintainer: Debian Acpi Team Architecture: arm64 Version: 1:2.0.31-1 Depends: libc6 (>= 2.27), lsb-base (>= 3.2-14), kmod Recommends: acpi-support-base (>= 0.114-1) Conffiles: /etc/default/acpid 5b934527919a9bba89c7978d15e918b3 /etc/init.d/acpid 2ba41d3445b3052d9d2d170b7a9c30dc Description: Advanced Configuration and Power Interface event daemon Modern computers support the Advanced Configuration and Power Interface (ACPI) to allow intelligent power management on your system and to query battery and configuration status. . ACPID is a completely flexible, totally extensible daemon for delivering ACPI events. It listens on netlink interface (or on the deprecated file /proc/acpi/event), and when an event occurs, executes programs to handle the event. The programs it executes are configured through a set of configuration files, which can be dropped into place by packages or by the admin. Homepage: http://sourceforge.net/projects/acpid2/ Package: adduser Status: install ok installed Priority: important Section: admin Installed-Size: 849 Maintainer: Debian Adduser Developers Architecture: all Multi-Arch: foreign Version: 3.118 Depends: passwd, debconf (>= 0.5) | debconf-2.0 Suggests: liblocale-gettext-perl, perl Conffiles: /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2 Description: add and remove users and groups This package includes the 'adduser' and 'deluser' commands for creating and removing users. . - 'adduser' creates new users and groups and adds existing users to existing groups; - 'deluser' removes users and groups and removes users from a given group. . Adding users with 'adduser' is much easier than adding them manually. Adduser will choose appropriate UID and GID values, create a home directory, copy skeletal user configuration, and automate setting initial values for the user's password, real name and so on. . Deluser can back up and remove users' home directories and mail spool or all the files they own on the system. . A custom script can be executed after each of the commands. Package: adwaita-icon-theme Status: install ok installed Priority: optional Section: gnome Installed-Size: 26804 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Version: 3.30.1-1 Replaces: gnome-themes-standard-data (<< 3.18.0-2~) Provides: gnome-icon-theme-symbolic Depends: hicolor-icon-theme, gtk-update-icon-cache, librsvg2-common Breaks: gnome-themes-standard-data (<< 3.18.0-2~) Description: default icon theme of GNOME This package contains the default icon theme used by the GNOME desktop. The icons are used in many of the official GNOME applications like eog, Evince, system monitor, and many more. Package: alsa-utils Status: deinstall ok config-files Priority: optional Section: sound Installed-Size: 2184 Maintainer: Debian ALSA Maintainers Architecture: arm64 Multi-Arch: foreign Version: 1.1.8-2 Config-Version: 1.1.8-2 Provides: audio-mixer Depends: kmod (>= 17-1~), lsb-base (>= 3.0-9), whiptail | dialog, libasound2 (>= 1.1.1), libc6 (>= 2.27), libfftw3-single3 (>= 3.3.5), libncursesw6 (>= 6), libsamplerate0 (>= 0.1.7), libtinfo6 (>= 6) Conffiles: /etc/init.d/alsa-utils 9b392bac8c24330ad47478a5038ead13 Description: Utilities for configuring and using ALSA Included tools: - alsactl: advanced controls for ALSA sound drivers - alsaloop: create loopbacks between PCM capture and playback devices - alsamixer: curses mixer - alsaucm: alsa use case manager - amixer: command line mixer - amidi: read from and write to ALSA RawMIDI ports - aplay, arecord: command line playback and recording - aplaymidi, arecordmidi: command line MIDI playback and recording - aconnect, aseqnet, aseqdump: command line MIDI sequencer control - iecset: set or dump IEC958 status bits - speaker-test: speaker test tone generator . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Package: anacron Status: install ok installed Priority: optional Section: admin Installed-Size: 98 Maintainer: Debian QA Group Architecture: arm64 Version: 2.3-28 Replaces: pe Depends: debianutils (>= 1.7), lsb-base (>= 3.0-10), libc6 (>= 2.17) Recommends: cron | cron-daemon, rsyslog | system-log-daemon Suggests: default-mta | mail-transport-agent, powermgmt-base Conffiles: /etc/anacrontab 00ff43422e8756204113c5546b00d529 /etc/cron.d/anacron 389b4ee27d3023ec855897c16612f319 /etc/cron.daily/0anacron a46c5cc26a2a6715d0155781ddd07a19 /etc/cron.monthly/0anacron 402ac7af3ebd2da5dddcd3712d776ae3 /etc/cron.weekly/0anacron b2c55b2905f28b3b53bdf3e2d66e830b /etc/default/anacron 964d39a52b30de6627ba346001730f03 /etc/init.d/anacron cb16d990aa80ca20aee7ea2ab91ff714 Description: cron-like program that doesn't go by time Anacron (like "anac(h)ronistic") is a periodic command scheduler. It executes commands at intervals specified in days. Unlike cron, it does not assume that the system is running continuously. It can therefore be used to control the execution of daily, weekly, and monthly jobs (or anything with a period of n days), on systems that don't run 24 hours a day. When installed and configured properly, Anacron will make sure that the commands are run at the specified intervals as closely as machine uptime permits. . This package is pre-configured to execute the daily jobs of the Debian system. You should install this program if your system isn't powered on 24 hours a day to make sure the maintenance jobs of other Debian packages are executed each day. Homepage: http://sourceforge.net/projects/anacron/ Package: apt Status: install ok installed Priority: required Section: admin Installed-Size: 3944 Maintainer: APT Development Team Architecture: arm64 Version: 1.8.2.3 Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~) Provides: apt-transport-https (= 1.8.2.3) Depends: adduser, gpgv | gpgv2 | gpgv1, debian-archive-keyring, libapt-pkg5.0 (>= 1.7.0~alpha3~), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libgnutls30 (>= 3.6.6), libseccomp2 (>= 1.0.1), libstdc++6 (>= 5.2) Recommends: ca-certificates Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10) Conffiles: /etc/apt/apt.conf.d/01autoremove 76120d358bc9037bb6358e737b3050b5 /etc/cron.daily/apt-compat 49e9b2cfa17849700d4db735d04244f3 /etc/kernel/postinst.d/apt-auto-removal 4ad976a68f045517cf4696cec7b8aa3a /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3 Description: commandline package manager This package provides commandline tools for searching and managing as well as querying information about packages as a low-level access to all features of the libapt-pkg library. . These include: * apt-get for retrieval of packages and information about them from authenticated sources and for installation, upgrade and removal of packages together with their dependencies * apt-cache for querying available information about installed as well as installable packages * apt-cdrom to use removable media as a source for packages * apt-config as an interface to the configuration settings * apt-key as an interface to manage authentication keys Package: apt-transport-https Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 152 Maintainer: APT Development Team Architecture: all Source: apt Version: 1.8.2.3 Depends: apt (>= 1.5~alpha4) Description: transitional package for https support This is a dummy transitional package - https support has been moved into the apt package in 1.5. It can be safely removed. Package: apt-utils Status: install ok installed Priority: important Section: admin Installed-Size: 1083 Maintainer: APT Development Team Architecture: arm64 Source: apt Version: 1.8.2.3 Depends: apt (= 1.8.2.3), libapt-inst2.0 (>= 1.0.5), libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.17), libdb5.3, libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Description: package management related utility programs This package contains some less used commandline utilities related to package management with APT. . * apt-extracttemplates is used by debconf to prompt for configuration questions before installation. * apt-ftparchive is used to create Packages and other index files needed to publish an archive of Debian packages * apt-sortpkgs is a Packages/Sources file normalizer. Package: aspell Status: install ok installed Priority: optional Section: text Installed-Size: 1052 Maintainer: Agustin Martin Domingo Architecture: arm64 Multi-Arch: foreign Version: 0.60.7~20110707-6+deb10u1 Replaces: aspell-bin (<< 0.60.3-2), aspell-hi (<= 0.01-1), aspell-mr (<= 0.10-1) Provides: aspell-bin Depends: libaspell15 (= 0.60.7~20110707-6+deb10u1), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libncursesw6 (>= 6), libstdc++6 (>= 5), libtinfo6 (>= 6), dictionaries-common (>> 0.40) Recommends: aspell-en | aspell-dictionary | aspell6a-dictionary Suggests: aspell-doc, spellutils Breaks: aspell-bin (<< 0.60.3-2) Description: GNU Aspell spell-checker GNU Aspell is a spell-checker which can be used either as a standalone application or embedded in other programs. Its main feature is that it does a much better job of suggesting possible spellings than just about any other spell-checker available for the English language, including Ispell and Microsoft Word. It also has many other technical enhancements over Ispell such as using shared memory for dictionaries and intelligently handling personal dictionaries when more than one Aspell process is open at once. . Aspell is designed to be a drop-in replacement for Ispell. Homepage: http://aspell.net/ Package: aspell-en Status: install ok installed Priority: optional Section: text Installed-Size: 424 Maintainer: Brian Nelson Architecture: all Multi-Arch: foreign Version: 2018.04.16-0-1 Provides: aspell-dictionary Depends: aspell (>= 0.60.3-2), dictionaries-common (>= 0.49.2) Description: English dictionary for GNU Aspell This package contains all the required files to add support for English language to the GNU Aspell spell checker. . American, British, Canadian and Australian spellings are included. Homepage: http://aspell.net/ Package: at-spi2-core Status: install ok unpacked Priority: optional Section: misc Installed-Size: 416 Maintainer: Debian Accessibility Team Architecture: arm64 Multi-Arch: foreign Version: 2.30.0-7 Depends: libatspi2.0-0 (>= 2.9.90), libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.37.3), libx11-6, libxtst6 Breaks: gdm3 (<< 3.4) Conffiles: /etc/X11/Xsession.d/90qt-a11y newconffile /etc/environment.d/90qt-a11y.conf newconffile /etc/xdg/autostart/at-spi-dbus-bus.desktop newconffile Description: Assistive Technology Service Provider Interface (dbus core) This package contains the core components of GNOME Accessibility. Homepage: https://wiki.gnome.org/Accessibility Package: base-files Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 340 Maintainer: Santiago Vila Architecture: arm64 Multi-Arch: foreign Version: 10.3+deb10u13 Replaces: base, dpkg (<= 1.15.0), miscutils Provides: base Pre-Depends: awk Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~) Conffiles: /etc/debian_version 3048aac68a7a9acf440ccae39a1e7d6e /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6 /etc/issue af1666d8841dd1d8bf0c7b7b3e185972 /etc/issue.net 3987d3ddecf2f1b622bcfdb589fe42c7 /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b Description: Debian base system miscellaneous files This package contains the basic filesystem hierarchy of a Debian system, and several important miscellaneous files, such as /etc/debian_version, /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others, and the text of several common licenses in use on Debian systems. Package: base-passwd Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 228 Maintainer: Colin Watson Architecture: arm64 Multi-Arch: foreign Version: 3.5.46 Replaces: base Depends: libc6 (>= 2.17), libdebconfclient0 (>= 0.145) Recommends: debconf (>= 0.5) | debconf-2.0 Description: Debian base system master password and group files These are the canonical master copies of the user database files (/etc/passwd and /etc/group), containing the Debian-allocated user and group IDs. The update-passwd tool is provided to keep the system databases synchronized with these master files. Package: bash Essential: yes Status: install ok installed Priority: required Section: shells Installed-Size: 6482 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: foreign Version: 5.0-4 Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1) Depends: base-files (>= 2.1.12), debianutils (>= 2.15) Pre-Depends: libc6 (>= 2.17), libtinfo6 (>= 6) Recommends: bash-completion (>= 20060301-0) Suggests: bash-doc Conflicts: bash-completion (<< 20060301-0) Conffiles: /etc/bash.bashrc 89269e1298235f1b12b4c16e4065ad0d /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a /etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97 Description: GNU Bourne Again SHell Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). . Bash is ultimately intended to be a conformant implementation of the IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2). . The Programmable Completion Code, by Ian Macdonald, is now found in the bash-completion package. Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html Package: binfmt-support Status: install ok installed Priority: optional Section: admin Installed-Size: 230 Maintainer: Colin Watson Architecture: arm64 Multi-Arch: foreign Version: 2.2.0-2 Depends: libc6 (>= 2.17), libpipeline1 (>= 1.0.0), lsb-base (>= 4.1+Debian3) Conffiles: /etc/init.d/binfmt-support b0f26b81f1e587f7134aff3e7b9fbc7f Description: Support for extra binary formats The binfmt_misc kernel module, contained in versions 2.1.43 and later of the Linux kernel, allows system administrators to register interpreters for various binary formats based on a magic number or their file extension, and cause the appropriate interpreter to be invoked whenever a matching file is executed. Think of it as a more flexible version of the #! executable interpreter mechanism. . This package provides an 'update-binfmts' script with which package maintainers can register interpreters to be used with this module without having to worry about writing their own init.d scripts, and which sysadmins can use for a slightly higher-level interface to this module. Homepage: https://nongnu.org/binfmt-support/ Package: blueman Status: install ok installed Priority: optional Section: x11 Installed-Size: 4961 Maintainer: Christopher Schramm Architecture: arm64 Version: 2.0.8-1+deb10u1 Depends: libbluetooth3 (>= 4.91), libc6 (>= 2.17), libglib2.0-0 (>= 2.31.8), libpython3.7 (>= 3.7.0), dconf-gsettings-backend | gsettings-backend, python3 (<< 3.8), python3 (>= 3.7~), python3:any, dbus, default-dbus-session-bus | dbus-session-bus, bluez (>= 4.61), obexd-client (>= 0.47) | bluez-obexd, obexd-server (>= 0.47) | bluez-obexd, python3-dbus, python3-gi, notification-daemon, librsvg2-common, gnome-icon-theme | mate-icon-theme | elementary-xfce-icon-theme, libpulse-mainloop-glib0, gir1.2-gtk-3.0, gir1.2-gdkpixbuf-2.0, gir1.2-glib-2.0, gir1.2-pango-1.0, gir1.2-notify-0.7, python3-cairo, python3-gi-cairo, gir1.2-appindicator3-0.1 Recommends: policykit-1, pulseaudio-module-bluetooth Conffiles: /etc/dbus-1/system.d/org.blueman.Mechanism.conf 7d70a9f33eb506a3c381443c63d81b19 /etc/xdg/autostart/blueman.desktop 930a32d694bbd6ecc91a5435aea01029 Description: Graphical bluetooth manager Blueman is a GTK+ bluetooth management utility for GNOME using bluez D-Bus backend. Homepage: https://github.com/blueman-project/blueman Package: bluez Status: install ok installed Priority: optional Section: admin Installed-Size: 4800 Maintainer: Debian Bluetooth Maintainers Architecture: arm64 Multi-Arch: foreign Version: 5.50-1.2~deb10u5 Replaces: bluez-audio (<= 3.36-3), bluez-input, bluez-network, bluez-serial, bluez-utils (<= 3.36-3), udev (<< 170-1) Depends: libasound2 (>= 1.0.17), libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdw1 (>= 0.127), libglib2.0-0 (>= 2.31.8), libreadline7 (>= 6.0), libudev1 (>= 196), kmod, udev, lsb-base, dbus Suggests: pulseaudio-module-bluetooth Breaks: udev (<< 170-1) Conflicts: bluez-audio (<= 3.36-3), bluez-utils (<= 3.36-3) Conffiles: /etc/bluetooth/input.conf ce3215368893042076fafce11db8962b /etc/bluetooth/main.conf eec4c9e179476513fc3f0e1e7599b703 /etc/bluetooth/network.conf 0c7497c405b963382ff71789d0730abd /etc/dbus-1/system.d/bluetooth.conf 92d4ee9390a14cdf225b79d8009b6f79 /etc/default/bluetooth 1e25cf981f29147187311b94f8e0ea89 /etc/init.d/bluetooth 1d503f26c72a83c43b90422ec5907626 Description: Bluetooth tools and daemons This package contains tools and system daemons for using Bluetooth devices. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Homepage: http://www.bluez.org Package: bluez-obexd Status: install ok installed Priority: optional Section: admin Installed-Size: 580 Maintainer: Debian Bluetooth Maintainers Architecture: arm64 Source: bluez Version: 5.50-1.2~deb10u5 Replaces: obexd-client, obexd-server Depends: libc6 (>= 2.28), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.35.9), libical3 (>= 3.0.0) Conflicts: obexd-client, obexd-server Description: bluez obex daemon This package contains a OBEX(OBject EXchange) daemon. . OBEX is communication protocol to facilitate the exchange of the binary object between the devices. . This was the software that is independent as obexd, but this has been integrated into BlueZ from BlueZ 5.0. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Homepage: http://www.bluez.org Package: bsdmainutils Status: deinstall ok config-files Priority: important Section: utils Installed-Size: 581 Maintainer: Debian Bsdmainutils Team Architecture: arm64 Multi-Arch: foreign Source: bsdmainutils (11.1.2) Version: 11.1.2+b1 Config-Version: 11.1.2+b1 Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.17), libtinfo6 (>= 6), bsdutils (>= 3.0-0), debianutils (>= 1.8) Suggests: cpp, wamerican | wordlist, whois, vacation Breaks: bsdutils (<< 1:2.13-11) Conffiles: /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96 /etc/cron.daily/bsdmainutils 559387f792462a62e3efb1d573e38d11 /etc/default/bsdmainutils bded239f4fea461cc5c92c3bd5a28cc9 Description: collection of more utilities from FreeBSD This package contains lots of small programs many people expect to find when they use a BSD-style Unix system. . It provides banner (as printerbanner), calendar, col, colcrt, colrm, column, from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and write (as bsd-write). . This package used to contain whois and vacation, which are now distributed in their own packages. Also here was tsort, which is now in the "coreutils" package. Package: bsdutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 281 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: foreign Source: util-linux (2.33.1-0.1+deb10u1) Version: 1:2.33.1-0.1+deb10u1 Replaces: bash-completion (<< 1:2.1-4.1~) Pre-Depends: libc6 (>= 2.17), libsystemd0 Recommends: bsdmainutils Breaks: bash-completion (<< 1:2.1-4.1~) Description: basic utilities from 4.4BSD-Lite This package contains the bare minimum of BSD utilities needed for a Debian system: logger, renice, script, scriptreplay, and wall. The remaining standard BSD utilities are provided by bsdmainutils. Package: bubblewrap Status: install ok installed Priority: optional Section: admin Installed-Size: 90 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: foreign Version: 0.3.1-4 Depends: libc6 (>= 2.17), libcap2 (>= 1:2.10), libselinux1 (>= 2.1.9) Breaks: flatpak (<< 0.8.0-2~) Description: setuid wrapper for unprivileged chroot and namespace manipulation Core execution engine for unprivileged containers that works as a setuid binary on kernels without user namespaces. Homepage: https://github.com/projectatomic/bubblewrap Package: busybox Status: install ok installed Priority: optional Section: utils Installed-Size: 808 Maintainer: Debian Install System Team Architecture: arm64 Version: 1:1.30.1-4 Replaces: busybox-static Depends: libc6 (>= 2.28) Breaks: initramfs-tools (<< 0.99) Conflicts: busybox-static Description: Tiny utilities for small and embedded systems BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for the most common utilities you would usually find on your desktop system (i.e., ls, cp, mv, mount, tar, etc.). The utilities in BusyBox generally have fewer options than their full-featured GNU cousins; however, the options that are included provide the expected functionality and behave very much like their GNU counterparts. . This package installs the BusyBox binary but does not install symlinks for any of the supported utilities. Some of the utilities can be used in the system by installing the busybox-syslogd, busybox-udhcpc or busybox-udhcpd packages. Homepage: http://www.busybox.net Package: bzip2 Status: install ok installed Priority: standard Section: utils Installed-Size: 181 Maintainer: Anibal Monsalve Salazar Architecture: arm64 Multi-Arch: foreign Version: 1.0.6-9.2~deb10u2 Replaces: libbz2 (<< 0.9.5d-3) Depends: libbz2-1.0 (= 1.0.6-9.2~deb10u2), libc6 (>= 2.17) Suggests: bzip2-doc Description: high-quality block-sorting file compressor - utilities bzip2 is a freely available, patent free, data compressor. . bzip2 compresses files using the Burrows-Wheeler block-sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors. . The archive file format of bzip2 (.bz2) is incompatible with that of its predecessor, bzip (.bz). Homepage: https://web.archive.org/web/20180801004107/http://www.bzip.org/ Package: ca-certificates Status: install ok installed Priority: optional Section: misc Installed-Size: 402 Maintainer: Julien Cristau Architecture: all Multi-Arch: foreign Version: 20200601~deb10u2 Depends: openssl (>= 1.1.1), debconf (>= 0.5) | debconf-2.0 Breaks: ca-certificates-java (<< 20121112+nmu1) Enhances: openssl Description: Common CA certificates Contains the certificate authorities shipped with Mozilla's browser to allow SSL-based applications to check for the authenticity of SSL connections. . Please note that Debian can neither confirm nor deny whether the certificate authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Full responsibility to assess them belongs to the local system administrator. Package: can-utils Status: install ok installed Priority: optional Section: net Installed-Size: 513 Maintainer: Alexander GQ Gerasiov Architecture: arm64 Version: 2018.02.0-1 Depends: libc6 (>= 2.17) Description: SocketCAN userspace utilities and tools CAN is a message-based network protocol designed for vehicles originally created by Robert Bosch GmbH. SocketCAN is a set of open source CAN drivers and a networking stack contributed by Volkswagen Research to the Linux kernel. . This package contains some userspace utilities for Linux SocketCAN subsystem. . Basic tools to display, record, generate and replay CAN traffic: candump, canplayer, cansend, cangen, cansniffer. CAN access via IP sockets: canlogserver, bcmserver, socketcand. CAN in-kernel gateway configuration: cangw. CAN bus measurement and testing: canbusload, can-calc-bit-timing, canfdtest. ISO-TP (ISO 15765-2 2016) tools: isotpsend, isotprecv, isotpsniffer, isotpdump, isotpserver, isotpperf, isotptun. CAN log file converters: asc2log, log2asc, log2long. CAN Serial Line Discipline configuration (for slcan driver): slcan_attach, slcand, slcanpty. SAE J1939 tools and demo: jacd, jspy, jsr, testj1939. Homepage: https://github.com/linux-can/can-utils Package: cmake-data Status: deinstall ok config-files Priority: optional Section: devel Installed-Size: 7232 Maintainer: Debian CMake Team Architecture: all Source: cmake Version: 3.13.4-1 Config-Version: 3.13.4-1 Conffiles: /etc/emacs/site-start.d/50cmake-data.el 295794176a9feb97d1f23316db2f1e8f Description: CMake data files (modules, templates and documentation) This package provides CMake architecture independent data files (modules, templates, documentation etc.). Unless you have cmake installed, you probably do not need this package. Homepage: https://cmake.org/ Package: console-setup Status: install ok installed Priority: optional Section: utils Installed-Size: 421 Maintainer: Debian Install System Team Architecture: all Multi-Arch: foreign Version: 1.193~deb10u1 Depends: console-setup-linux | console-setup-freebsd | hurd, xkb-data (>= 0.9), keyboard-configuration (= 1.193~deb10u1) Pre-Depends: debconf (>= 1.5.34) Suggests: lsb-base (>= 3.0-6), locales Breaks: lsb (<< 2.0-6), lsb-base (<< 3.0-6), lsb-core (<< 2.0-6) Conflicts: console-setup-mini Description: console font and keymap setup program This package provides the console with the same keyboard configuration scheme as the X Window System. As a result, there is no need to duplicate or change the keyboard files just to make simple customizations such as the use of dead keys, the key functioning as AltGr or Compose key, the key(s) to switch between Latin and non-Latin mode, etc. . The package also installs console fonts supporting many of the world's languages. It provides an unified set of font faces - the classic VGA, the simplistic Fixed, and the cleaned Terminus, TerminusBold and TerminusBoldVGA. Package: console-setup-linux Status: install ok installed Priority: optional Section: utils Installed-Size: 1758 Maintainer: Debian Install System Team Architecture: all Multi-Arch: foreign Source: console-setup Version: 1.193~deb10u1 Replaces: console-setup (<< 1.71), console-terminus Provides: console-terminus Depends: kbd (>= 0.99-12) | console-tools (>= 1:0.2.3-16), keyboard-configuration (= 1.193~deb10u1), init-system-helpers (>= 1.29~) | initscripts Suggests: console-setup Breaks: console-cyrillic (<= 0.9-11), console-setup (<< 1.71), console-terminus Conflicts: console-setup-freebsd Conffiles: /etc/console-setup/compose.ARMSCII-8.inc fef36b61fb8b1cacc151ad3db127f777 /etc/console-setup/compose.CP1251.inc fef88d8c8dd4c726498003fd3cd84a7f /etc/console-setup/compose.CP1255.inc c972a2e90938657e97b643366b98b2ed /etc/console-setup/compose.CP1256.inc 5ea5e4d41da7a88f742863810e86144b /etc/console-setup/compose.GEORGIAN-ACADEMY.inc b6d80f40abff7e8af236796ebaca0247 /etc/console-setup/compose.GEORGIAN-PS.inc cf45272b6bf35a22223b132600dc36c3 /etc/console-setup/compose.IBM1133.inc a31102602f7e7cab9738022b6c5469ae /etc/console-setup/compose.ISIRI-3342.inc 5ada7fbba750192f11fa238add232ba9 /etc/console-setup/compose.ISO-8859-1.inc 28f20a64f3f0b175cfaec4bce07465c2 /etc/console-setup/compose.ISO-8859-10.inc e5fce59617c839b56574c9e323d34686 /etc/console-setup/compose.ISO-8859-11.inc ad2f3cc7ee64602a790bad8a2a989243 /etc/console-setup/compose.ISO-8859-13.inc 5e9ad266f17ff2a0281a870079bc8284 /etc/console-setup/compose.ISO-8859-14.inc 360a44f83e8f8c9d463c9400dcc60de4 /etc/console-setup/compose.ISO-8859-15.inc 695ec832355223fb036629e4e6a9a963 /etc/console-setup/compose.ISO-8859-16.inc 8245c19b5262d8d23ca856587739eb20 /etc/console-setup/compose.ISO-8859-2.inc c93ffa7f80e22c04c94e89a0cd742458 /etc/console-setup/compose.ISO-8859-3.inc 67b8fafc842a4dc9b3bc0c06af394834 /etc/console-setup/compose.ISO-8859-4.inc aba127ff3df5159c3070617a7efac46c /etc/console-setup/compose.ISO-8859-5.inc f861a4b0403490677e6d400f2d7129da /etc/console-setup/compose.ISO-8859-6.inc 41ea36ea1c1a1c0c9bebdf0016395e1f /etc/console-setup/compose.ISO-8859-7.inc 8f48a9f7c9f69ca828edbd7b276fe406 /etc/console-setup/compose.ISO-8859-8.inc 9cceaa9f3312f89aba371d3c893f4e7b /etc/console-setup/compose.ISO-8859-9.inc 05aae7589b5062a53f346f721cb0f7d3 /etc/console-setup/compose.KOI8-R.inc 8cfd7766b86e5e55d6e71d0d95519c92 /etc/console-setup/compose.KOI8-U.inc 217ee62f6982736276f41f760f8622f8 /etc/console-setup/compose.TIS-620.inc 31b73af83ef3993c128e2b983b9eaf89 /etc/console-setup/compose.VISCII.inc e4ffc74868adf4cc39ba61dd99581899 /etc/console-setup/remap.inc b72cfe32ffa93987f74c5cec9ac180fd /etc/init.d/console-setup.sh 510488b5120b580b673a15b75a5498b0 /etc/init.d/keyboard-setup.sh b868200c6e36ef87e27ead9a3ddad2db Description: Linux specific part of console-setup This package includes fonts in psf format and definitions of various 8-bit charmaps. Package: coreutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 15200 Maintainer: Michael Stone Architecture: arm64 Multi-Arch: foreign Version: 8.30-3 Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libc6 (>= 2.28), libselinux1 (>= 2.1.13) Description: GNU core utilities This package contains the basic file, shell and text manipulation utilities which are expected to exist on every operating system. . Specifically, this package includes: arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false flock fmt fold groups head hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test timeout touch tr true truncate tsort tty uname unexpand uniq unlink users vdir wc who whoami yes Homepage: http://gnu.org/software/coreutils Package: cpio Status: install ok installed Priority: important Section: utils Installed-Size: 997 Maintainer: Anibal Monsalve Salazar Architecture: arm64 Multi-Arch: foreign Version: 2.12+dfsg-9+deb10u1 Replaces: cpio-mt Depends: libc6 (>= 2.17) Suggests: libarchive1 Conflicts: cpio-mt, mt-st (<< 0.6) Description: GNU cpio -- a program to manage archives of files GNU cpio is a tool for creating and extracting archives, or copying files from one place to another. It handles a number of cpio formats as well as reading and writing tar files. Homepage: http://www.gnu.org/software/cpio/ Package: cpp Status: install ok installed Priority: optional Section: interpreters Installed-Size: 42 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: allowed Source: gcc-defaults (1.181) Version: 4:8.3.0-1 Depends: cpp-8 (>= 8.3.0-1~) Suggests: cpp-doc Conflicts: cpp-doc (<< 1:2.95.3) Description: GNU C preprocessor (cpp) The GNU C preprocessor is a macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. . This is a dependency package providing the default GNU C preprocessor. Package: cpp-8 Status: install ok installed Priority: optional Section: interpreters Installed-Size: 19280 Maintainer: Debian GCC Maintainers Architecture: arm64 Source: gcc-8 Version: 8.3.0-6 Replaces: gccgo-8 (<< 8.3.0-6) Depends: gcc-8-base (= 8.3.0-6), libc6 (>= 2.17), libgmp10 (>= 2:5.0.1~), libisl19 (>= 0.15), libmpc3, libmpfr6 (>= 3.1.3), zlib1g (>= 1:1.1.4) Suggests: gcc-8-locales (>= 8) Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4) Description: GNU C preprocessor A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. Homepage: http://gcc.gnu.org/ Package: cpufrequtils Status: install ok installed Priority: optional Section: admin Installed-Size: 166 Maintainer: Mattia Dongili Architecture: arm64 Version: 008-1.1 Depends: libc6 (>= 2.17), libcpufreq0 (>= 006), debconf (>= 0.5) | debconf-2.0, lsb-base (>= 3.0) Pre-Depends: init-system-helpers (>= 1.54~) Conffiles: /etc/init.d/cpufrequtils b693a7fed31dbc07dcd3a3e3370e064d /etc/init.d/loadcpufreq 0038fdab5542db36fe0d6837e9427f1a Description: utilities to deal with the cpufreq Linux kernel feature This package contains two utilities for inspecting and setting the CPU frequency through both the sysfs and procfs CPUFreq kernel interfaces. . By default, it also enables CPUFreq at boot time if the correct CPU driver is found. Homepage: http://kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html Package: crda Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 267 Maintainer: Ben Hutchings Architecture: arm64 Multi-Arch: foreign Version: 3.18-1 Config-Version: 3.18-1 Depends: libc6 (>= 2.17), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libssl1.1 (>= 1.1.0), wireless-regdb, iw (>= 3.2-1~) Conffiles: /etc/default/crda d1f1468521b60cdfc0b9d22d5a74975a Description: wireless Central Regulatory Domain Agent This package provides a Central Regulatory Domain Agent (CRDA) to be used by the Linux kernel cfg80211 wireless subsystem to query and apply the regulatory domain settings wireless devices may operate within for a given location. . CRDA queries operational frequency regulations stored within the regulatory database provided by the wireless-regdb package. Homepage: https://wireless.wiki.kernel.org/en/developers/Regulatory/CRDA Package: curl Status: install ok installed Priority: optional Section: web Installed-Size: 399 Maintainer: Alessandro Ghedini Architecture: arm64 Multi-Arch: foreign Version: 7.64.0-4+deb10u9 Depends: libc6 (>= 2.17), libcurl4 (= 7.64.0-4+deb10u9), zlib1g (>= 1:1.1.4) Description: command line tool for transferring data with URL syntax curl is a command line tool for transferring data with URL syntax, supporting DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP. . curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a busload of other useful tricks. Homepage: http://curl.haxx.se Package: dash Essential: yes Status: install ok installed Priority: required Section: shells Installed-Size: 220 Maintainer: Andrej Shadura Architecture: arm64 Multi-Arch: foreign Version: 0.5.10.2-5 Depends: debianutils (>= 2.15), dpkg (>= 1.19.1), debconf (>= 0.5) | debconf-2.0 Pre-Depends: libc6 (>= 2.17) Description: POSIX-compliant shell The Debian Almquist Shell (dash) is a POSIX-compliant shell derived from ash. . Since it executes scripts faster than bash, and has fewer library dependencies (making it more robust against software or hardware failures), it is used as the default system shell on Debian systems. Homepage: http://gondor.apana.org.au/~herbert/dash/ Package: dbus Status: install ok installed Priority: standard Section: admin Installed-Size: 582 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: foreign Version: 1.12.28-0+deb10u1 Provides: dbus-bin (= 1.12.28-0+deb10u1), dbus-system-bus (= 1.12.28-0+deb10u1) Depends: adduser, libapparmor1 (>= 2.8.94), libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libcap-ng0 (>= 0.7.9), libdbus-1-3 (= 1.12.28-0+deb10u1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 2.0.65), libsystemd0 Suggests: default-dbus-session-bus | dbus-session-bus Conffiles: /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015 /etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27 Description: simple interprocess messaging system (daemon and utilities) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . D-Bus supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-Bus also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. . It comes with several bindings, including GLib, Python, Qt and Java. . This package contains the D-Bus daemon and related utilities. . The client-side library can be found in the libdbus-1-3 package, as it is no longer contained in this package. Homepage: http://dbus.freedesktop.org/ Package: dbus-x11 Status: install ok installed Priority: optional Section: x11 Installed-Size: 157 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: foreign Source: dbus Version: 1.12.28-0+deb10u1 Provides: dbus-session-bus Depends: dbus, libc6 (>= 2.17), libdbus-1-3 (= 1.12.28-0+deb10u1), libx11-6 Conffiles: /etc/X11/Xsession.d/75dbus_dbus-launch 7e16a9fa2ead9d6596b655e417fda3ba /etc/X11/Xsession.d/95dbus_update-activation-env a97a2e4a0193d85e7646a2de721d09a2 Description: simple interprocess messaging system (X11 deps) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package contains the dbus-launch utility which is necessary for packages using a D-Bus session bus. . See the dbus description for more information about D-Bus in general. Homepage: http://dbus.freedesktop.org/ Package: dconf-gsettings-backend Status: install ok installed Priority: optional Section: libs Installed-Size: 77 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: dconf Version: 0.30.1-2 Provides: gsettings-backend Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.55.2), dconf-service (>= 0.30.1-2), dconf-service (<< 0.30.1-2.1~), libdconf1 (= 0.30.1-2) Description: simple configuration storage system - GSettings back-end DConf is a low-level key/value database designed for storing desktop environment settings. . This package contains a back-end for GSettings. It is needed by applications accessing settings through GSettings to set custom values and listen for changes. Homepage: https://wiki.gnome.org/Projects/dconf Package: dconf-service Status: install ok installed Priority: optional Section: libs Installed-Size: 110 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: foreign Source: dconf Version: 0.30.1-2 Depends: libc6 (>= 2.28), libglib2.0-0 (>= 2.55.2), libdconf1 (= 0.30.1-2), default-dbus-session-bus | dbus-session-bus Recommends: dconf-gsettings-backend Description: simple configuration storage system - D-Bus service DConf is a low-level key/value database designed for storing desktop environment settings. . This package contains the DConf service, which applications talk to using D-Bus in order to obtain their settings. It is mostly used by the GSettings backend. Homepage: https://wiki.gnome.org/Projects/dconf Package: debconf Status: install ok installed Priority: required Section: admin Installed-Size: 520 Maintainer: Debconf Developers Architecture: all Multi-Arch: foreign Version: 1.5.71+deb10u1 Replaces: debconf-tiny Provides: debconf-2.0 Pre-Depends: perl-base (>= 5.20.1-3~) Recommends: apt-utils (>= 0.5.1), debconf-i18n Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk3-perl, libnet-ldap-perl, perl, debconf-kde-helper (>= 0.1+git20110702) Breaks: apt-listchanges (<< 3.14), ubiquity (<< 17.10.2), update-notifier-common (<< 3.187~) Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13) Conffiles: /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811 Description: Debian configuration management system Debconf is a configuration management system for debian packages. Packages use Debconf to ask questions when they are installed. Package: debian-archive-keyring Status: install ok installed Priority: important Section: misc Installed-Size: 290 Maintainer: Debian Release Team Architecture: all Multi-Arch: foreign Version: 2019.1+deb10u2 Conffiles: /etc/apt/trusted.gpg.d/debian-archive-bookworm-automatic.gpg 8ed7972dd2fdcbcf16ca5c139655eced /etc/apt/trusted.gpg.d/debian-archive-bookworm-security-automatic.gpg befef93070ec9002b7873a7375ffc739 /etc/apt/trusted.gpg.d/debian-archive-bookworm-stable.gpg 4974fa497e6120a5babe820bc779e357 /etc/apt/trusted.gpg.d/debian-archive-bullseye-automatic.gpg f5b8d048d75e0ba9a964c28daa0757cf /etc/apt/trusted.gpg.d/debian-archive-bullseye-security-automatic.gpg b6b2ad2c894ecfe479981fd0eadc1c92 /etc/apt/trusted.gpg.d/debian-archive-bullseye-stable.gpg 045a5096301163f4b172d226e9d4dbb8 /etc/apt/trusted.gpg.d/debian-archive-buster-automatic.gpg 9e93d0a43d3a60272034c15900e9df6f /etc/apt/trusted.gpg.d/debian-archive-buster-security-automatic.gpg f2d1b03b7a3c279ec66425d06aaab50f /etc/apt/trusted.gpg.d/debian-archive-buster-stable.gpg 4797ff6df738da65413ef710cf73936f /etc/apt/trusted.gpg.d/debian-archive-stretch-automatic.gpg f8ca9f176f6a5747e113f62220671e0b /etc/apt/trusted.gpg.d/debian-archive-stretch-security-automatic.gpg 986449e3c1ed5c157686f0166411b829 /etc/apt/trusted.gpg.d/debian-archive-stretch-stable.gpg 67fa5396fa0900c0abd1058d98d9247e Description: GnuPG archive keys of the Debian archive The Debian project digitally signs its Release files. This package contains the archive keys used for that. Package: debian-keyring Status: install ok installed Priority: optional Section: misc Installed-Size: 32956 Maintainer: Debian Keyring Maintainers Architecture: all Multi-Arch: foreign Version: 2019.02.25 Replaces: debian-maintainers Provides: debian-maintainers Recommends: gnupg (>= 1.0.6-4) Conflicts: debian-maintainers Description: GnuPG keys of Debian Developers and Maintainers The Debian project wants developers to digitally sign the announcements of their packages with GnuPG, to protect against forgeries. This package contains keyrings of GnuPG and keys of Debian Developers (uploading and non-uploading), as well as of Debian Maintainers. . Do note that, although this package is provided for convenience, it is not necessarily kept updated with the latest changes; the authoritative source for keyring information is publicly accessible via rsync at: . keyring.debian.org::keyrings/keyrings/ . Finally, the following Git repository is usually kept up to date with the public authoritative data: . https://salsa.debian.org/debian-keyring/keyring.git Homepage: https://keyring.debian.org/ Package: debianutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 214 Maintainer: Clint Adams Architecture: arm64 Multi-Arch: foreign Version: 4.8.6.1 Pre-Depends: libc6 (>= 2.17) Description: Miscellaneous utilities specific to Debian This package provides a number of small utilities which are used primarily by the installation scripts of Debian packages, although you may use them directly. . The specific utilities included are: add-shell installkernel ischroot remove-shell run-parts savelog tempfile which Package: desktop-base Status: install ok installed Priority: optional Section: x11 Installed-Size: 10867 Maintainer: Debian Desktop Team Architecture: all Version: 10.0.2 Depends: librsvg2-common, fonts-quicksand Recommends: plymouth-label Suggests: gnome | kde-standard | xfce4 | wmaker Description: common files for the Debian Desktop This package contains various miscellaneous files which are used by Debian Desktop installations. Currently, it provides some Debian-related artwork and themes, .desktop files containing links to Debian related material (suitable for placement on a user's desktop), and other common files between the available desktop environments such as GNOME and KDE. Homepage: https://www.debian.org/devel/debian-desktop/ Package: desktop-file-utils Status: deinstall ok config-files Priority: optional Section: devel Installed-Size: 267 Maintainer: Debian freedesktop.org maintainers Architecture: arm64 Multi-Arch: foreign Version: 0.23-4 Config-Version: 0.23-4 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.28.0) Description: Utilities for .desktop files Some utilities to make dealing with .desktop files easier: * update-desktop-database -- update the desktop-MIME mapping * desktop-file-validate -- validate a desktop file * desktop-file-install -- install a desktop file, munging en route. Homepage: http://www.freedesktop.org/wiki/Software/desktop-file-utils Package: dictionaries-common Status: install ok installed Priority: optional Section: text Installed-Size: 758 Maintainer: Agustin Martin Domingo Architecture: all Multi-Arch: foreign Version: 1.28.1 Replaces: openoffice.org-updatedicts Provides: openoffice.org-updatedicts Depends: debconf (>= 1.5.5) | debconf-2.0, libtext-iconv-perl, emacsen-common (>= 2.0.5) Suggests: ispell | aspell | hunspell, wordlist Breaks: hunspell-ar (<= 0.0.0+20080110-1.1), hunspell-da (<= 1:3.1.0), hunspell-de-at (<= 20100727-1), hunspell-de-ch (<= 20100727-1), hunspell-de-de (<= 20100727-1), hunspell-en-us (<= 20070829-4ubuntu2), hunspell-eu-es (<= 0.4.20081029-4), hunspell-gl-es (<= 2.2a-8), hunspell-kk (<= 1.1-1), hunspell-ko (<= 0.5.3-1), hunspell-se (<= 1.0~beta6.20081222-1.1), hunspell-uz (<= 0.6-3.1), hyphen-en-us (<< 2.8.3-1), myspell-bg (<= 3.0-12), myspell-ca (<= 0.6-10), myspell-cs (<= 20040229-5), myspell-cs-cz (<= 20040229-5), myspell-da (<= 1.6.25-1), myspell-de-at (<= 20100727-1), myspell-de-ch (<= 20100727-1), myspell-de-de (<= 20100727-1), myspell-de-de-oldspell (<= 1:2-27), myspell-el-gr (<= 0.8-1), myspell-en-au (<= 2.1-5), myspell-eo (<= 2.1.2000.02.25-42), myspell-es (<= 1.11-1), myspell-et (<= 1:20030606-12.1), myspell-eu-es (<= 0.4.20081029-4), myspell-fa (<= 0.20070816-2), myspell-fi (<= 0.7-17.3), myspell-fo (<= 0.2.44-2), myspell-fr (<= 1.4-25), myspell-fr-gut (<= 1:1.0-28), myspell-ga (<= 2.0-20), myspell-gd (<= 0.50-7), myspell-gl-es (<= 2.2a-8), myspell-gv (<= 0.50-9), myspell-he (<= 1.1-1), myspell-hr (<= 20060617-2), myspell-hu (<= 0.99.4-2), myspell-hy (<= 0.20.0-1), myspell-ku (<= 0.20.0-1.1), myspell-lv (<= 0.9.3-2), myspell-nb (<= 2.0.10-3.2), myspell-nl (<= 1:2.0-1), myspell-nn (<= 2.0.10-3.2), myspell-nr (<< 20070206-4ubuntu1), myspell-ns (<< 20070206-4ubuntu1), myspell-pl (<= 20100612-1), myspell-pt-br (<= 20101030-1), myspell-pt-pt (<= 20091013-2), myspell-ru (<= 0.99g5-8.1), myspell-sk (<= 0.5.5a-2.1fakesync1), myspell-sl (<< 1.0-3ubuntu1), myspell-ss (<< 20070206-4ubuntu1), myspell-sv-se (<= 1.3.8-6-2.2), myspell-tn (<< 20070206-4ubuntu1), myspell-ts (<< 20070207-4ubuntu1), myspell-uk (<= 1.6.0-1), myspell-ve (<< 20070206-3ubuntu1), myspell-xh (<< 20070206-4ubuntu1), myspell-zu (<< 20070207-5ubuntu1), mythes-it (<= 2.0.7.gh.deb1-3), openoffice.org-thesaurus-it (<< 2.0.7.gh.deb1-1.1ubuntu3) Conffiles: /etc/emacs/site-start.d/50dictionaries-common.el a4f9cdbabac30e1252c1c2f93b91e601 Description: spelling dictionaries - common utilities This package provides utilities shared between all wordlists and spelling dictionaries for Ispell, Aspell, or MySpell/Hunspell. It also includes support infrastructure for software using them (such as JED and Mutt), and some patched spell-checking Lisp files for better Emacs integration. . More information about the availability of these dictionaries and their naming conventions is available in the README.Debian file. Homepage: https://salsa.debian.org/debian/dictionaries-common Package: diffutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1538 Maintainer: Santiago Vila Architecture: arm64 Version: 1:3.7-3 Replaces: diff Pre-Depends: libc6 (>= 2.17) Suggests: diffutils-doc, wdiff Description: File comparison utilities The diffutils package provides the diff, diff3, sdiff, and cmp programs. . `diff' shows differences between two files, or each corresponding file in two directories. `cmp' shows the offsets and line numbers where two files differ. `cmp' can also show all the characters that differ between the two files, side by side. `diff3' shows differences among three files. `sdiff' merges two files interactively. . The set of differences produced by `diff' can be used to distribute updates to text files (such as program source code) to other people. This method is especially useful when the differences are small compared to the complete files. Given `diff' output, the `patch' program can update, or "patch", a copy of the file. Homepage: http://www.gnu.org/software/diffutils/ Package: dirmngr Status: install ok installed Priority: optional Section: utils Installed-Size: 1221 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Replaces: gnupg2 (<< 2.1.10-2) Depends: adduser, gpgconf (= 2.2.12-1+deb10u2), lsb-base (>= 3.2-13), libassuan0 (>= 2.5.0), libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgnutls30 (>= 3.6.6), libgpg-error0 (>= 1.35), libksba8 (>= 1.3.4), libldap-2.4-2 (>= 2.4.7), libnpth0 (>= 0.90) Recommends: gnupg (= 2.2.12-1+deb10u2) Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor Breaks: gnupg2 (<< 2.1.10-2) Enhances: gpg, gpgsm, squid Description: GNU privacy guard - network certificate management service dirmngr is a server for managing and downloading OpenPGP and X.509 certificates, as well as updates and status signals related to those certificates. For OpenPGP, this means pulling from the public HKP/HKPS keyservers, or from LDAP servers. For X.509 this includes Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol updates (OCSP). It is capable of using Tor for network access. . dirmngr is used for network access by gpg, gpgsm, and dirmngr-client, among other tools. Unless this package is installed, the parts of the GnuPG suite that try to interact with the network will fail. Homepage: https://www.gnupg.org/ Package: distro-info-data Status: install ok installed Priority: optional Section: devel Installed-Size: 18 Maintainer: Benjamin Drung Architecture: all Multi-Arch: foreign Version: 0.41+deb10u9 Replaces: distro-info (<< 0.3~) Breaks: distro-info (<< 0.21+deb10u1~) Description: information about the distributions' releases (data files) Information about all releases of Debian and Ubuntu. The distro-info script will give you the codename for e.g. the latest stable release of your distribution. To get information about a specific distribution there are the debian-distro-info and the ubuntu-distro-info scripts. . This package contains the data files. Package: dmsetup Status: install ok installed Priority: optional Section: admin Installed-Size: 257 Maintainer: Debian LVM Team Architecture: arm64 Multi-Arch: foreign Source: lvm2 (2.03.02-3) Version: 2:1.02.155-3 Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.138) Description: Linux Kernel Device Mapper userspace library The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but software raid, and other drivers that create "virtual" block devices. . This package contains a utility for modifying device mappings. Homepage: http://sources.redhat.com/lvm2/ Package: dnsmasq-base Status: install ok installed Priority: optional Section: net Installed-Size: 887 Maintainer: Simon Kelley Architecture: arm64 Source: dnsmasq Version: 2.80-1+deb10u1 Replaces: dnsmasq (<< 2.63-1~), dnsmasq-base Provides: dnsmasq-base Depends: adduser, libc6 (>= 2.28), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.4~), libnfnetlink0 Recommends: dns-root-data Breaks: dnsmasq (<< 2.63-1~) Conflicts: dnsmasq-base-lua Conffiles: /etc/dbus-1/system.d/dnsmasq.conf 9a18c8a761c2262dbf0c8b3345a85242 Description: Small caching DNS proxy and DHCP/TFTP server This package contains the dnsmasq executable and documentation, but not the infrastructure required to run it as a system daemon. For that, install the dnsmasq package. Homepage: http://www.thekelleys.org.uk/dnsmasq/doc.html Package: dosfstools Status: install ok installed Priority: optional Section: otherosfs Installed-Size: 229 Maintainer: Andreas Bombe Architecture: arm64 Version: 4.1-2 Depends: libc6 (>= 2.17), libudev1 (>= 183) Description: utilities for making and checking MS-DOS FAT filesystems The dosfstools package includes the mkfs.fat and fsck.fat utilities, which respectively make and check MS-DOS FAT filesystems. Homepage: https://github.com/dosfstools/dosfstools Package: dpkg Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 6674 Maintainer: Dpkg Developers Architecture: arm64 Multi-Arch: foreign Version: 1.19.8 Depends: tar (>= 1.28-1) Pre-Depends: libbz2-1.0, libc6 (>= 2.17), liblzma5 (>= 5.2.2), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4) Suggests: apt, debsig-verify Breaks: acidbase (<= 1.4.5-4), amule (<< 2.3.1+git1a369e47-3), beep (<< 1.3-4), im (<< 1:151-4), libapt-pkg5.0 (<< 1.7~b), libdpkg-perl (<< 1.18.11), lsb-base (<< 10.2019031300), netselect (<< 0.3.ds1-27), pconsole (<< 1.0-12), phpgacl (<< 3.3.7-7.3), pure-ftpd (<< 1.0.43-1), systemtap (<< 2.8-1), terminatorx (<< 4.0.1-1), xvt (<= 2.1-20.1) Conffiles: /etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b /etc/cron.daily/dpkg f20e10c12fb47903b8ec9d282491f4be /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b /etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286 /etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f Description: Debian package management system This package provides the low-level infrastructure for handling the installation and removal of Debian software packages. . For Debian package development tools, install dpkg-dev. Homepage: https://wiki.debian.org/Teams/Dpkg Package: e2fsprogs Status: install ok installed Priority: required Section: admin Installed-Size: 1357 Maintainer: Theodore Y. Ts'o Architecture: arm64 Multi-Arch: foreign Version: 1.44.5-1+deb10u3 Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libcom-err2 (>= 1.43.9), libext2fs2 (= 1.44.5-1+deb10u3), libss2 (>= 1.38), libuuid1 (>= 2.16) Recommends: e2fsprogs-l10n Suggests: gpart, parted, fuse2fs, e2fsck-static Conffiles: /etc/mke2fs.conf 72b349d890a9b5cca06c7804cd0c8d1d Description: ext2/ext3/ext4 file system utilities The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package contains programs for creating, checking, and maintaining ext2/3/4-based file systems. It also includes the "badblocks" program, which can be used to scan for bad blocks on a disk or other storage device. Homepage: http://e2fsprogs.sourceforge.net Important: yes Package: emacsen-common Status: install ok installed Priority: optional Section: editors Installed-Size: 62 Maintainer: Rob Browning Architecture: all Version: 3.0.4 Conflicts: emacs19, emacs20, emacs21-common, emacs22-common, emacs23-common, emacs24-common, emacs25-common, xemacs21-support (<< 21.4.24-6~) Description: Common facilities for all emacsen This package contains code that is needed by all the (x)emacs packages. It will be automatically installed when needed. Package: ethtool Status: install ok installed Priority: optional Section: net Installed-Size: 381 Maintainer: Debian Kernel Team Architecture: arm64 Version: 1:4.19-1 Depends: libc6 (>= 2.17) Conffiles: /etc/network/if-pre-up.d/ethtool 39693276fe35fccec75f610cb71d3e85 /etc/network/if-up.d/ethtool b0d11ba5983c8c5990bb9933c35a3ec5 Description: display or change Ethernet device settings ethtool can be used to query and change settings such as speed, auto- negotiation and checksum offload on many network devices, especially Ethernet devices. Homepage: https://www.kernel.org/pub/software/network/ethtool/ Package: evtest Status: install ok installed Priority: optional Section: utils Installed-Size: 64 Maintainer: Stephen Kitt Architecture: arm64 Version: 1:1.33-2 Depends: libc6 (>= 2.17) Recommends: evemu-tools Description: utility to monitor Linux input device events evtest monitors a Linux input device, displaying all the events it generates. . It can be used to determine mice button bindings, keymaps for exotic keyboards... It is commonly used to debug issues with input devices in X.Org. . evtest is now in maintenance mode and doesn't support all the features of the latest kernels; evemu-record from the evemu-tools package should be used instead. Homepage: https://cgit.freedesktop.org/evtest/ Package: exfat-fuse Status: install ok installed Priority: optional Section: otherosfs Installed-Size: 72 Maintainer: Sven Hoexter Architecture: arm64 Source: fuse-exfat Version: 1.3.0-1 Depends: libc6 (>= 2.17), libfuse2 (>= 2.6), fuse Recommends: exfat-utils Description: read and write exFAT driver for FUSE fuse-exfat is a read and write driver implementing the extended file allocation table as a filesystem in userspace. A mounthelper is provided unter the name mount.exfat-fuse. Homepage: https://github.com/relan/exfat Package: exfat-utils Status: install ok installed Priority: optional Section: otherosfs Installed-Size: 211 Maintainer: Sven Hoexter Architecture: arm64 Version: 1.3.0-1 Depends: libc6 (>= 2.17) Recommends: exfat-fuse Description: utilities to create, check, label and dump exFAT filesystem Utilities to manage extended file allocation table filesystem. This package provides tools to create, check and label the filesystem. It contains - dumpexfat to dump properties of the filesystem - exfatfsck / fsck.exfat to report errors found on a exFAT filesystem - exfatlabel to label a exFAT filesystem - mkexfatfs / mkfs.exfat to create a exFAT filesystem. Homepage: https://github.com/relan/exfat Package: fdisk Status: install ok installed Priority: important Section: utils Installed-Size: 483 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: foreign Source: util-linux Version: 2.33.1-0.1+deb10u1 Replaces: util-linux (<< 2.29.2-3~) Depends: libc6 (>= 2.17), libfdisk1 (>= 2.33), libmount1 (>= 2.24.2), libncursesw6 (>= 6), libsmartcols1 (>= 2.28~rc1), libtinfo6 (>= 6) Breaks: util-linux (<< 2.29.2-3~) Description: collection of partitioning utilities This package contains the classic fdisk, sfdisk and cfdisk partitioning utilities from the util-linux suite. . The utilities included in this package allow you to partition your hard disk. The utilities supports both modern and legacy partition tables (eg. GPT, MBR, etc). . The fdisk utility is the classical text-mode utility. The cfdisk utilitity gives a more userfriendly curses based interface. The sfdisk utility is mostly for automation and scripting uses. Important: yes Package: file Status: install ok installed Priority: standard Section: utils Installed-Size: 99 Maintainer: Christoph Biedl Architecture: arm64 Multi-Arch: foreign Version: 1:5.35-4+deb10u2 Depends: libc6 (>= 2.17), libmagic1 (= 1:5.35-4+deb10u2), zlib1g (>= 1:1.1.4) Description: Recognize the type of data in a file using "magic" numbers The file command is "a file type guesser", a command-line tool that tells you in words what kind of data a file contains. . This package contains the file program itself. Homepage: https://www.darwinsys.com/file/ Package: findutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1934 Maintainer: Andreas Metzler Architecture: arm64 Multi-Arch: foreign Version: 4.6.0+git+20190209-2 Pre-Depends: libc6 (>= 2.17), libselinux1 (>= 1.32) Suggests: mlocate | locate Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1) Description: utilities for finding files--find, xargs GNU findutils provides utilities to find files meeting specified criteria and perform various actions on the files which are found. This package contains 'find' and 'xargs'; however, 'locate' has been split off into a separate package. Homepage: https://savannah.gnu.org/projects/findutils/ Package: fontconfig Status: install ok installed Priority: optional Section: fonts Installed-Size: 543 Maintainer: Debian freedesktop.org maintainers Architecture: arm64 Multi-Arch: foreign Version: 2.13.1-2 Depends: libc6 (>= 2.17), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), fontconfig-config Description: generic font configuration library - support binaries Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . Fontconfig is not a rasterization library, nor does it impose a particular rasterization library on the application. The X-specific library 'Xft' uses fontconfig along with freetype to specify and rasterize fonts. . This package contains a program to maintain the fontconfig cache (fc-cache), a sample program to list installed fonts (fc-list), a program to test the matching rules (fc-match) and a program to dump the binary cache files in string form (fc-cat). It no longer makes fonts managed by defoma available to fontconfig applications. Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/ Package: fontconfig-config Status: install ok installed Priority: optional Section: fonts Installed-Size: 441 Maintainer: Debian freedesktop.org maintainers Architecture: all Multi-Arch: foreign Source: fontconfig Version: 2.13.1-2 Depends: debconf (>= 0.5) | debconf-2.0, ucf (>= 0.29), fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-freefont Breaks: libfontconfig1 (<< 2.13.0) Conffiles: /etc/fonts/conf.d/README 42d13304ed2e9e5b60b74d6ed29b3729 /etc/fonts/fonts.conf 2af66c6e0e92424ca5f32ab89e131621 Description: generic font configuration library - configuration Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . This package contains the configuration files and scripts for fontconfig. Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/ Package: fonts-dejavu-core Status: install ok installed Priority: optional Section: fonts Installed-Size: 2954 Maintainer: Debian Fonts Task Force Architecture: all Multi-Arch: foreign Source: fonts-dejavu Version: 2.37-1 Replaces: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~) Breaks: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~) Conffiles: /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d /etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad /etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c /etc/fonts/conf.avail/57-dejavu-sans-mono.conf d3e4d007a9ac6c47243b5994f1d195e3 /etc/fonts/conf.avail/57-dejavu-sans.conf 29cfe6c581fe2dbc222525ce00097002 /etc/fonts/conf.avail/57-dejavu-serif.conf 1dca2f4ec93842e94f3919f7e0c8f7a9 /etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc /etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205 /etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb Description: Vera font family derivate with additional characters DejaVu provides an expanded version of the Vera font family aiming for quality and broader Unicode coverage while retaining the original Vera style. DejaVu currently works towards conformance with the Multilingual European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu fonts provide serif, sans and monospaced variants. . This package only contains the sans, sans-bold, serif, serif-bold, mono and mono-bold variants. For additional variants, see the ttf-dejavu-extra package. . DejaVu fonts are intended for use on low-resolution devices (mainly computer screens) but can be used in printing as well. Homepage: http://dejavu-fonts.org/ Package: fonts-quicksand Status: install ok installed Priority: optional Section: fonts Installed-Size: 392 Maintainer: Jonathan Carter Architecture: all Multi-Arch: foreign Version: 0.2016-2 Description: sans-serif font with round attributes Quicksand is a display sans serif with rounded terminals. The project was initiated by Andrew Paglinawan in 2008 using geometric shapes as a core foundation. It is designed for display purposes but kept legible enough to use in small sizes as well. . In 2016, in collaboration with Andrew, it was thoroughly revised by Thomas Jockin to improve the quality. Homepage: https://fonts.google.com/specimen/Quicksand Package: fonts-wqy-zenhei Status: install ok installed Priority: optional Section: fonts Installed-Size: 16432 Maintainer: Debian Fonts Task Force Architecture: all Multi-Arch: foreign Version: 0.9.45-7 Replaces: ttf-wqy-zenhei (<< 0.9.45-5) Provides: ttf-wqy-zenhei Depends: fontconfig (>= 2.3.1-1) Pre-Depends: dpkg (>= 1.15.7.2) Breaks: ttf-wqy-zenhei (<< 0.9.45-5) Conffiles: /etc/fonts/conf.avail/25-wqy-zenhei.conf 5b4392ab301c6224d2bae49bb896d239 /etc/fonts/conf.avail/63-wqy-zenhei-sharp.conf 1db7f6ba4e17a4d8825f114162317780 /etc/fonts/conf.avail/64-wqy-zenhei.conf c5592bf0144f5f37700c837462cde8e4 Description: "WenQuanYi Zen Hei" A Hei-Ti Style (sans-serif) Chinese font WenQuanYi Zen Hei is a Hei-Ti style (sans-serif type) Chinese font. It was designed for general purpose text formatting and on-screen display of Chinese characters among many other languages. The embolden strokes of the font glyphs produces enhanced screen contrast, making it easier to read and recognize. The embedded bitmap glyphs further enhance on-screen performance, and can be enabled with the provided configuration files. . WenQuanYi Zen Hei provides a fairly complete coverage of Chinese Hanzi glyphs, including both simplified and traditional forms. The total glyph number in this font is over 35,000, including over 21,000 Chinese Hanzi. This font provides full coverage of GBK (CP936) charset, CJK Unified Ideographs, as well as the code-points needed for zh_CN, zh_SG, zh_TW, zh_HK, zh_MO, ja (Japanese) and ko (Korean) locales for fontconfig. . Starting from version 0.8, this font package provides two font families, i.e. the proportional "WenQuanYi Zen Hei", and the monospaced typeface named "WenQuanYi Zen Hei Mono". Homepage: http://wenq.org/wqy2/ Package: fuse Status: install ok installed Priority: optional Section: utils Installed-Size: 136 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Version: 2.9.9-1+deb10u1 Depends: libc6 (>= 2.28), libfuse2 (= 2.9.9-1+deb10u1), adduser, mount (>= 2.19.1), sed (>= 4) Conffiles: /etc/fuse.conf 298587592c8444196833f317def414f2 Description: Filesystem in Userspace Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. Homepage: https://github.com/libfuse/libfuse/wiki Package: galculator Status: deinstall ok config-files Priority: optional Section: math Installed-Size: 1445 Maintainer: Dmitry Smirnov Architecture: arm64 Source: galculator (2.1.4-1) Version: 2.1.4-1+b1 Config-Version: 2.1.4-1+b1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.16.0), libgtk-3-0 (>= 3.3.16), libpango-1.0-0 (>= 1.14.0) Description: scientific calculator galculator is a scientific calculator. It supports different number bases (DEC/HEX/OCT/BIN) and angles bases (DEG/RAD/GRAD) and features a wide range of mathematical (basic arithmetic operations, trigonometric functions, etc) and other useful functions (memory, etc) at the moment. galculator can be used in algebraic mode as well as in Reverse Polish Notation (RPN). Homepage: http://galculator.mnim.org/ Package: gawk Status: install ok installed Priority: optional Section: interpreters Installed-Size: 2359 Maintainer: Adrian Bunk Architecture: arm64 Multi-Arch: foreign Version: 1:4.2.1+dfsg-1 Provides: awk Pre-Depends: libc6 (>= 2.17), libgmp10, libmpfr6 (>= 3.1.3), libreadline7 (>= 6.0), libsigsegv2 (>= 2.9) Suggests: gawk-doc Conffiles: /etc/profile.d/gawk.csh b3d9e29a36f945b2065b2f88d18dadaa /etc/profile.d/gawk.sh bfc054c0862d0fad98ca641b951c7061 Description: GNU awk, a pattern scanning and processing language `awk', a program that you can use to select particular records in a file and perform operations upon them. . Gawk is the GNU Project's implementation of the AWK programming language. It conforms to the definition of the language in the POSIX 1003.2 Command Language And Utilities Standard. This version in turn is based on the description in The AWK Programming Language, by Aho, Kernighan, and Weinberger, with the additional features defined in the System V Release 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk extensions, and some GNU-specific extensions. Homepage: http://www.gnu.org/software/gawk/ Package: gcc-8-base Status: install ok installed Priority: optional Section: libs Installed-Size: 248 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: same Source: gcc-8 Version: 8.3.0-6 Breaks: gnat (<< 7), gnat-6 (<< 6.4) Description: GCC, the GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Homepage: http://gcc.gnu.org/ Package: gdb Status: install ok installed Priority: optional Section: devel Installed-Size: 10527 Maintainer: Héctor Orón Martínez Architecture: arm64 Source: gdb (8.2.1-2) Version: 8.2.1-2+b3 Replaces: gdb Depends: libc6 (>= 2.17), libexpat1 (>= 2.0.1), liblzma5 (>= 5.1.1alpha+20110809), libncursesw6 (>= 6), libpython3.7 (>= 3.7.0), libreadline7 (>= 6.0), libtinfo6 (>= 6), zlib1g (>= 1:1.2.0) Recommends: libc-dbg Suggests: gdb-doc, gdbserver Conflicts: gdb Conffiles: /etc/gdb/gdbinit e030dc891a3af1f7779429b5c0554c98 Description: GNU Debugger GDB is a source-level debugger, capable of breaking programs at any specific line, displaying variable values, and determining where errors occurred. Currently, gdb supports C, C++, D, Objective-C, Fortran, Java, OpenCL C, Pascal, assembly, Modula-2, Go, and Ada. A must-have for any serious programmer. Homepage: http://www.gnu.org/s/gdb/ Package: gdisk Status: install ok installed Priority: extra Section: admin Installed-Size: 759 Maintainer: Guillaume Delacour Architecture: arm64 Version: 1.0.3-1.1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libncursesw6 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 5.2), libtinfo6 (>= 6), libuuid1 (>= 2.16) Recommends: groff-base Description: GPT fdisk text-mode partitioning tool GPT fdisk (aka gdisk) is a text-mode partitioning tool that works on Globally Unique Identifier (GUID) Partition Table (GPT) disks, rather than on the more common (through 2009) Master Boot Record (MBR) partition tables. Homepage: http://sourceforge.net/projects/gptfdisk/ Package: gir1.2-appindicator3-0.1 Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 55 Maintainer: Debian QA Group Architecture: arm64 Multi-Arch: same Source: libappindicator Version: 0.4.92-7 Depends: gir1.2-glib-2.0, gir1.2-gtk-3.0 (>= 2.91.3), libappindicator3-1 (>= 0.4.90) Description: Typelib files for libappindicator3-1 A library to allow applications to export a menu into the panel. Based on KSNI it also works in KDE and will fallback to generic Systray support if none of those are available. . This package can be used by other packages using the GIRepository format to generate dynamic bindings for libappindicator3. Homepage: https://launchpad.net/libappindicator Package: gir1.2-atk-1.0 Status: install ok installed Priority: optional Section: introspection Installed-Size: 91 Maintainer: Debian Accessibility Team Architecture: arm64 Multi-Arch: same Source: atk1.0 Version: 2.30.0-2 Depends: gir1.2-glib-2.0 (>= 1.32.0), libatk1.0-0 (>= 2.30.0) Description: ATK accessibility toolkit (GObject introspection) ATK is a toolkit providing accessibility interfaces for applications or other toolkits. By implementing these interfaces, those other toolkits or applications can be used with tools such as screen readers, magnifiers, and other alternative input devices. . This package can be used by other packages using the GIRepository format to generate dynamic bindings Homepage: https://wiki.gnome.org/Accessibility Package: gir1.2-atspi-2.0 Status: install ok installed Priority: optional Section: introspection Installed-Size: 70 Maintainer: Debian Accessibility Team Architecture: arm64 Multi-Arch: same Source: at-spi2-core Version: 2.30.0-7 Replaces: gir1.0-gtk-2.0 (<< 2.22), gobject-introspection-repository Depends: gir1.2-freedesktop, gir1.2-glib-2.0, libatspi2.0-0 (>= 2.30.0-7) Description: Assistive Technology Service Provider (GObject introspection) This package can be used by other packages using the GIRepository format to generate dynamic bindings Homepage: https://wiki.gnome.org/Accessibility Package: gir1.2-freedesktop Status: install ok installed Priority: optional Section: introspection Installed-Size: 49 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gobject-introspection Version: 1.58.3-2 Provides: gir1.2-cairo-1.0 (= 1.58.3-2), gir1.2-dbus-1.0 (= 1.58.3-2), gir1.2-dbusglib-1.0 (= 1.58.3-2), gir1.2-fontconfig-2.0 (= 1.58.3-2), gir1.2-freetype2-2.0 (= 1.58.3-2), gir1.2-gl-1.0 (= 1.58.3-2), gir1.2-libxml2-2.0 (= 1.58.3-2), gir1.2-xfixes-4.0 (= 1.58.3-2), gir1.2-xft-2.0 (= 1.58.3-2), gir1.2-xlib-2.0 (= 1.58.3-2), gir1.2-xrandr-1.3 (= 1.58.3-2) Depends: gir1.2-glib-2.0 (= 1.58.3-2), libcairo-gobject2 (>= 1.10.0) Description: Introspection data for some FreeDesktop components GObject Introspection is a project for providing machine readable introspection data of the API of C libraries. This introspection data can be used in several different use cases, for example automatic code generation for bindings, API verification and documentation generation. . GObject Introspection contains tools to generate and handle the introspection data. . This package contains small pieces of introspection data for the Cairo, FontConfig, FreeType, GL, and some XOrg libraries. They are distributed in this package temporarily, while the original sources do not include support for GObject Introspection. They are far from complete and only include what is necessary for other introspection packages to work properly. Homepage: https://wiki.gnome.org/GObjectIntrospection Package: gir1.2-gdkpixbuf-2.0 Status: install ok installed Priority: optional Section: introspection Installed-Size: 45 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gdk-pixbuf Version: 2.38.1+dfsg-1 Provides: gir1.2-gdkpixdata-2.0 (= 2.38.1+dfsg-1) Depends: gir1.2-glib-2.0 (>= 0.9.3), libgdk-pixbuf2.0-0 (>= 2.36.9) Breaks: libgtk3-perl (<< 0.034-2~) Description: GDK Pixbuf library - GObject-Introspection The GDK Pixbuf library provides: - Image loading and saving facilities. - Fast scaling and compositing of pixbufs. - Simple animation loading (ie. animated GIFs) . It can be used by packages using the GIRepository format to generate dynamic bindings. Homepage: http://www.gtk.org/ Package: gir1.2-glib-2.0 Status: install ok installed Priority: optional Section: introspection Installed-Size: 636 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gobject-introspection Version: 1.58.3-2 Provides: gir1.2-gio-2.0 (= 1.58.3-2), gir1.2-girepository-2.0 (= 1.58.3-2), gir1.2-gmodule-2.0 (= 1.58.3-2), gir1.2-gobject-2.0 (= 1.58.3-2) Depends: libgirepository-1.0-1 (>= 1.45.4), libglib2.0-0 (>= 2.58.2) Description: Introspection data for GLib, GObject, Gio and GModule GObject Introspection is a project for providing machine readable introspection data of the API of C libraries. This introspection data can be used in several different use cases, for example automatic code generation for bindings, API verification and documentation generation. . GObject Introspection contains tools to generate and handle the introspection data. . This package contains the introspection data for the GLib, GObject, GModule and Gio libraries. Homepage: https://wiki.gnome.org/GObjectIntrospection Package: gir1.2-gst-plugins-bad-1.0 Status: hold ok installed Priority: extra Section: introspection Installed-Size: 1771 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-bad1.0 Version: 1.14.4-1+deb10u2 Depends: gir1.2-gst-plugins-base-1.0 (>= 1.14.4), gir1.2-gstreamer-1.0 (>= 1.14.4), libgstreamer-plugins-bad1.0-0 (<< 1.15), libgstreamer-plugins-bad1.0-0 (>= 1.14.4) Description: GObject introspection data for the GStreamer libraries from the "bad" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared to the rest. They might be close to being good quality, but they're missing something - be it a good code review, some documentation, a set of tests, a real live maintainer, or some actual wide use. . This package contains introspection data for the GStreamer libraries from the "bad" set. It can be used by packages using the GIRepository format to generate dynamic bindings. Homepage: https://gstreamer.freedesktop.org Package: gir1.2-gst-plugins-base-1.0 Status: hold ok installed Priority: optional Section: introspection Installed-Size: 1569 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u1 Depends: gir1.2-glib-2.0 (>= 0.9.12-4~), gir1.2-gstreamer-1.0 (>= 1.14.4), libgstreamer-gl1.0-0 (>= 1.14.4-2+deb10u1), libgstreamer-plugins-base1.0-0 (>= 1.14.4-2+deb10u1) Description: GObject introspection data for the GStreamer Plugins Base library This package contains introspection data for the GStreamer Plugins Base library. . GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . It can be used by packages using the GIRepository format to generate dynamic bindings. Homepage: https://gstreamer.freedesktop.org Package: gir1.2-gstreamer-1.0 Status: install ok installed Priority: optional Section: introspection Installed-Size: 1380 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gstreamer1.0 Version: 1.14.4-1 Depends: gir1.2-glib-2.0 (>= 0.9.12-4~), libgstreamer1.0-0 (>= 1.14.3) Description: GObject introspection data for the GStreamer library This package contains introspection data for the GStreamer streaming media framework. . GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . It can be used by packages using the GIRepository format to generate dynamic bindings. Homepage: https://gstreamer.freedesktop.org Package: gir1.2-gtk-3.0 Status: install ok installed Priority: optional Section: introspection Installed-Size: 1002 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gtk+3.0 Version: 3.24.5-1 Provides: gir1.2-gdk-3.0 (= 3.24.5-1), gir1.2-gdkx11-3.0 (= 3.24.5-1) Depends: gir1.2-atk-1.0 (>= 2.15.1), gir1.2-freedesktop (>= 1.39.0), gir1.2-gdkpixbuf-2.0 (>= 2.30.0), gir1.2-glib-2.0 (>= 1.39.0), gir1.2-pango-1.0 (>= 1.41.0), libgtk-3-0 (>= 3.24.3), libgtk-3-common Breaks: python-gi (<< 3.18), python3-gi (<< 3.18) Description: GTK+ graphical user interface library -- gir bindings GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package can be used by other packages using the GIRepository format to generate dynamic bindings. Homepage: https://www.gtk.org/ Package: gir1.2-notify-0.7 Status: install ok installed Priority: optional Section: introspection Installed-Size: 30 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libnotify Version: 0.7.7-4 Depends: gir1.2-gdkpixbuf-2.0, gir1.2-glib-2.0 (>= 0.9.12), libnotify4 (>= 0.7.3) Description: sends desktop notifications to a notification daemon (Introspection files) A library that sends desktop notifications to a notification daemon, as defined in the Desktop Notifications spec. These notifications can be used to inform the user about an event or display some form of information without getting in the user's way. . This package can be used by other packages using the GIRepository format to generate dynamic bindings. Package: gir1.2-pango-1.0 Status: install ok installed Priority: optional Section: introspection Installed-Size: 127 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: pango1.0 Version: 1.42.4-8~deb10u1 Provides: gir1.2-pangocairo-1.0 (= 1.42.4-8~deb10u1), gir1.2-pangoft2-1.0 (= 1.42.4-8~deb10u1), gir1.2-pangoxft-1.0 (= 1.42.4-8~deb10u1) Depends: gir1.2-freedesktop (>= 0.9.5), gir1.2-glib-2.0 (>= 0.9.5), libpango-1.0-0 (>= 1.42.0), libpangocairo-1.0-0 (>= 1.22.0), libpangoft2-1.0-0 (>= 1.14.0), libpangoxft-1.0-0 (>= 1.14.0) Description: Layout and rendering of internationalized text - gir bindings Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package can be used by other packages using the GIRepository format to generate dynamic bindings. Homepage: http://www.pango.org/ Package: git Status: deinstall ok config-files Priority: optional Section: vcs Installed-Size: 35224 Maintainer: Gerrit Pape Architecture: arm64 Multi-Arch: foreign Version: 1:2.20.1-2+deb10u3 Config-Version: 1:2.20.1-2+deb10u3 Replaces: git-core (<< 1:1.7.0.4-1.), gitweb (<< 1:1.7.4~rc1) Provides: git-completion, git-core Depends: libc6 (>= 2.28), libcurl3-gnutls (>= 7.56.1), libexpat1 (>= 2.0.1), libpcre2-8-0 (>= 10.32), zlib1g (>= 1:1.2.0), perl, liberror-perl, git-man (>> 1:2.20.1), git-man (<< 1:2.20.1-.) Recommends: ca-certificates, patch, less, ssh-client Suggests: gettext-base, git-daemon-run | git-daemon-sysvinit, git-doc, git-el, git-email, git-gui, gitk, gitweb, git-cvs, git-mediawiki, git-svn Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), dgit (<< 5.1~), git-buildpackage (<< 0.6.5), git-core (<< 1:1.7.0.4-1.), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), gitweb (<< 1:1.7.4~rc1), guilt (<< 0.33), openssh-client (<< 1:6.8), stgit (<< 0.15), stgit-contrib (<< 0.15) Conffiles: /etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6 Description: fast, scalable, distributed revision control system Git is popular version control system designed to handle very large projects with speed and efficiency; it is used for many high profile open source projects, most notably the Linux kernel. . Git falls in the category of distributed source code management tools. Every Git working directory is a full-fledged repository with full revision tracking capabilities, not dependent on network access or a central server. . This package provides the git main components with minimal dependencies. Additional functionality, e.g. a graphical user interface and revision tree visualizer, tools for interoperating with other VCS's, or a web interface, is provided as separate git* packages. Homepage: https://git-scm.com/ Package: glib-networking Status: install ok installed Priority: optional Section: libs Installed-Size: 159 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Version: 2.58.0-2+deb10u2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.55.0), libgnutls30 (>= 3.6.6), libproxy1v5 (>= 0.4.14), glib-networking-services (>= 2.58.0-2+deb10u2), glib-networking-services (<< 2.58.0-2+deb10u2.1~), glib-networking-common (>= 2.58.0-2+deb10u2), gsettings-desktop-schemas Breaks: balsa (<< 2.5.6-2+deb10u1) Description: network-related giomodules for GLib This package contains various network related extensions for the GIO library. Package: glib-networking-common Status: install ok installed Priority: optional Section: libs Installed-Size: 462 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: glib-networking Version: 2.58.0-2+deb10u2 Recommends: glib-networking Description: network-related giomodules for GLib - data files This package contains data files and translations for the GIO network extensions in glib-networking. Package: glib-networking-services Status: install ok installed Priority: optional Section: libs Installed-Size: 43 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: foreign Source: glib-networking Version: 2.58.0-2+deb10u2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.55.0), libproxy1v5 (>= 0.4.14), glib-networking-common (>= 2.58.0-2+deb10u2) Recommends: glib-networking Description: network-related giomodules for GLib - D-Bus services This package contains D-Bus services that are used by the GIO network extensions in glib-networking, for actions that need to be done in a separate process. Package: glmark2-data Status: hold ok installed Priority: optional Section: utils Installed-Size: 9311 Maintainer: Debian Games Team Architecture: all Source: glmark2 Version: 2021.02+ds-1 Recommends: glmark2-drm (>= 2021.02+ds-1) | glmark2-wayland (>= 2021.02+ds-1) | glmark2-x11 (>= 2021.02+ds-1) | glmark2-es2-wayland (>= 2021.02+ds-1) | glmark2-es2-drm (>= 2021.02+ds-1) | glmark2-es2-x11 (>= 2021.02+ds-1) Description: OpenGL (ES) 2.0 benchmark suite -- data files glmark2 is a benchmark for OpenGL (ES) 2.0. It uses only the subset of the OpenGL 2.0 API that is compatible with OpenGL ES 2.0. glmark2 offers a suite of scenes that can be used to measure many aspects of OpenGL (ES) 2.0 performance. The way in which each scene is rendered is configurable through a set of options. . This package provides data files. Homepage: https://github.com/glmark2/glmark2 Package: glmark2-es2-x11 Status: hold ok installed Priority: optional Section: utils Installed-Size: 845 Maintainer: Debian Games Team Architecture: arm64 Source: glmark2 Version: 2021.02+ds-1 Depends: glmark2-data (= 2021.02+ds-1), libx11-6, libc6 (>= 2.27), libgcc1 (>= 1:3.0), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libstdc++6 (>= 5.2) Description: OpenGL 2.0 benchmark suite glmark2 is a benchmark for OpenGL 2.0. It uses only the subset of the OpenGL 2.0 API that is compatible with OpenGL ES 2.0. glmark2 offers a suite of scenes that can be used to measure many aspects of OpenGL (ES) 2.0 performance. The way in which each scene is rendered is configurable through a set of options. . This package is intended only for the X11 platform. GLESv2 version. Homepage: https://github.com/glmark2/glmark2 Package: gnome-icon-theme Status: install ok installed Priority: optional Section: gnome Installed-Size: 15193 Maintainer: Josselin Mouette Architecture: all Multi-Arch: foreign Version: 3.12.0-3 Depends: hicolor-icon-theme, gtk-update-icon-cache, librsvg2-common Enhances: nautilus (>= 2.2) Description: GNOME Desktop icon theme This package contains the default icon theme used by the GNOME desktop. The icons are used in the panel menu, and in nautilus and other applications, to represent the different applications, files, directories, and devices. Package: gnome-system-tools Status: install ok installed Priority: optional Section: gnome Installed-Size: 9090 Maintainer: Andriy Grytsenko Architecture: arm64 Version: 3.0.0-8 Replaces: gnome-network-admin, ximian-setup-tools Provides: gnome-network-admin Depends: dconf-gsettings-backend | gsettings-backend, libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libdbus-1-3 (>= 1.9.14), libfribidi0 (>= 0.19.2), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.0.0), liboobs-1-5 (>= 3.0.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpolkit-gobject-1-0 (>= 0.99), policykit-1-gnome | mate-polkit Suggests: ntp Conflicts: gnome-network-admin Conffiles: /etc/gnome-system-tools/user-profiles.conf 7265658bfca0a3940670a7bcb6fe3b1b Description: Cross-platform configuration utilities The GNOME System Tools are a fully integrated set of tools aimed to make easy the job that means the computer administration on an UNIX or Linux system. They're thought to help from the new Linux or UNIX user to the system administrators. . Its main advantages are: * An user-friendly interface to carry out the main administration tasks. * The use of a common user interface in every system. * A common structure that makes easy the development of new system tools. Nowadays there are tools for managing: - Users and groups - Date and time - Network options - Services - Shares (NFS and Samba) Package: gnupg Status: install ok installed Priority: optional Section: utils Installed-Size: 724 Maintainer: Debian GnuPG Maintainers Architecture: all Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Replaces: gnupg2 (<< 2.1.11-7+exp1) Depends: dirmngr (<< 2.2.12-1+deb10u2.1~), dirmngr (>= 2.2.12-1+deb10u2), gnupg-l10n (= 2.2.12-1+deb10u2), gnupg-utils (<< 2.2.12-1+deb10u2.1~), gnupg-utils (>= 2.2.12-1+deb10u2), gpg (<< 2.2.12-1+deb10u2.1~), gpg (>= 2.2.12-1+deb10u2), gpg-agent (<< 2.2.12-1+deb10u2.1~), gpg-agent (>= 2.2.12-1+deb10u2), gpg-wks-client (<< 2.2.12-1+deb10u2.1~), gpg-wks-client (>= 2.2.12-1+deb10u2), gpg-wks-server (<< 2.2.12-1+deb10u2.1~), gpg-wks-server (>= 2.2.12-1+deb10u2), gpgsm (<< 2.2.12-1+deb10u2.1~), gpgsm (>= 2.2.12-1+deb10u2), gpgv (<< 2.2.12-1+deb10u2.1~), gpgv (>= 2.2.12-1+deb10u2) Suggests: parcimonie, xloadimage Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.2.12-1+deb10u2), gnupg2 (<< 2.1.11-7+exp1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4) Description: GNU privacy guard - a free PGP replacement GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains the full suite of GnuPG tools for cryptographic communications and data storage. Homepage: https://www.gnupg.org/ Package: gnupg-l10n Status: install ok installed Priority: optional Section: localization Installed-Size: 4602 Maintainer: Debian GnuPG Maintainers Architecture: all Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Replaces: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~) Breaks: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~) Enhances: dirmngr, gpg, gpg-agent Description: GNU privacy guard - localization files GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC 4880. . This package contains the translation files for the use of GnuPG in non-English locales. Homepage: https://www.gnupg.org/ Package: gnupg-utils Status: install ok installed Priority: extra Section: utils Installed-Size: 1814 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Depends: libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.35), libksba8 (>= 1.3.4), libreadline7 (>= 6.0), zlib1g (>= 1:1.1.4) Recommends: gpg, gpg-agent, gpgconf, gpgsm Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Description: GNU privacy guard - utility programs GnuPG is GNU's tool for secure communication and data storage. . This package contains several useful utilities for manipulating OpenPGP data and other related cryptographic elements. It includes: . * addgnupghome -- create .gnupg home directories * applygnupgdefaults -- run gpgconf --apply-defaults for all users * gpgcompose -- an experimental tool for constructing arbitrary sequences of OpenPGP packets (e.g. for testing) * gpgparsemail -- parse an e-mail message into annotated format * gpgsplit -- split a sequence of OpenPGP packets into files * gpgtar -- encrypt or sign files in an archive * kbxutil -- list, export, import Keybox data * lspgpot -- convert PGP ownertrust values to GnuPG * migrate-pubring-from-classic-gpg -- use only "modern" formats * symcryptrun -- use simple symmetric encryption tool in GnuPG framework * watchgnupg -- watch socket-based logs Homepage: https://www.gnupg.org/ Package: gpg Status: install ok installed Priority: optional Section: utils Installed-Size: 1445 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Replaces: gnupg (<< 2.1.21-4) Depends: gpgconf (= 2.2.12-1+deb10u2), libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.35), libreadline7 (>= 6.0), libsqlite3-0 (>= 3.7.15), zlib1g (>= 1:1.1.4) Recommends: gnupg (= 2.2.12-1+deb10u2) Breaks: gnupg (<< 2.1.21-4) Description: GNU Privacy Guard -- minimalist public key operations GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains /usr/bin/gpg itself, and is useful on its own only for public key operations (encryption, signature verification, listing OpenPGP certificates, etc). If you want full capabilities (including secret key operations, network access, etc), please install the "gnupg" package, which pulls in the full suite of tools. Homepage: https://www.gnupg.org/ Package: gpg-agent Status: install ok installed Priority: optional Section: utils Installed-Size: 1213 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Replaces: gnupg-agent (<< 2.1.21-4) Provides: gnupg-agent Depends: gpgconf (= 2.2.12-1+deb10u2), pinentry-curses | pinentry, libassuan0 (>= 2.5.1), libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.35), libnpth0 (>= 0.90) Recommends: gnupg (= 2.2.12-1+deb10u2) Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon Breaks: gnupg-agent (<< 2.1.21-4) Conffiles: /etc/X11/Xsession.d/90gpg-agent fbb9ce5e8e4ba5727090f0aa51b61a82 /etc/logcheck/ignore.d.server/gpg-agent 040d545c7f33c0581fd2ae198dab1d7a Description: GNU privacy guard - cryptographic agent GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains the agent program gpg-agent which handles all secret key material for OpenPGP and S/MIME use. The agent also provides a passphrase cache, which is used by pre-2.1 versions of GnuPG for OpenPGP operations. Without this package, trying to do secret-key operations with any part of the modern GnuPG suite will fail. Homepage: https://www.gnupg.org/ Package: gpg-wks-client Status: install ok installed Priority: optional Section: utils Installed-Size: 614 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Depends: dirmngr (= 2.2.12-1+deb10u2), gpg (= 2.2.12-1+deb10u2), gpg-agent (= 2.2.12-1+deb10u2), libassuan0 (>= 2.5.0), libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.35) Recommends: gnupg (= 2.2.12-1+deb10u2) Description: GNU privacy guard - Web Key Service client GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package provides the GnuPG client for the Web Key Service protocol. . A Web Key Service is a service that allows users to upload keys per mail to be verified over https as described in https://tools.ietf.org/html/draft-koch-openpgp-webkey-service . For more information see: https://wiki.gnupg.org/WKS Homepage: https://www.gnupg.org/ Package: gpg-wks-server Status: install ok installed Priority: optional Section: utils Installed-Size: 601 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Depends: gpg (= 2.2.12-1+deb10u2), gpg-agent (= 2.2.12-1+deb10u2), libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.35) Recommends: gnupg (= 2.2.12-1+deb10u2) Description: GNU privacy guard - Web Key Service server GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package provides the GnuPG server for the Web Key Service protocol. . A Web Key Service is a service that allows users to upload keys per mail to be verified over https as described in https://tools.ietf.org/html/draft-koch-openpgp-webkey-service . For more information see: https://wiki.gnupg.org/WKS Homepage: https://www.gnupg.org/ Package: gpgconf Status: install ok installed Priority: optional Section: utils Installed-Size: 739 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Depends: libassuan0 (>= 2.5.0), libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.35), libreadline7 (>= 6.0) Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Description: GNU privacy guard - core configuration utilities GnuPG is GNU's tool for secure communication and data storage. . This package contains core utilities used by different tools in the suite offered by GnuPG. It can be used to programmatically edit config files for tools in the GnuPG suite, to launch or terminate per-user daemons (if installed), etc. Homepage: https://www.gnupg.org/ Package: gpgsm Status: install ok installed Priority: optional Section: utils Installed-Size: 899 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Replaces: gnupg2 (<< 2.1.10-2) Depends: gpgconf (= 2.2.12-1+deb10u2), libassuan0 (>= 2.5.0), libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.35), libksba8 (>= 1.3.4), libreadline7 (>= 6.0) Recommends: gnupg (= 2.2.12-1+deb10u2) Breaks: gnupg2 (<< 2.1.10-2) Description: GNU privacy guard - S/MIME version GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains the gpgsm program. gpgsm is a tool to provide digital encryption and signing services on X.509 certificates and the CMS protocol. gpgsm includes complete certificate management. Homepage: https://www.gnupg.org/ Package: gpgv Status: install ok installed Priority: important Section: utils Installed-Size: 834 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.12-1+deb10u2 Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1) Depends: libbz2-1.0, libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.35), zlib1g (>= 1:1.1.4) Suggests: gnupg Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29) Description: GNU privacy guard - signature verification tool GnuPG is GNU's tool for secure communication and data storage. . gpgv is actually a stripped-down version of gpg which is only able to check signatures. It is somewhat smaller than the fully-blown gpg and uses a different (and simpler) way to check that the public keys used to make the signature are valid. There are no configuration files and only a few options are implemented. Homepage: https://www.gnupg.org/ Package: gpicview Status: install ok installed Priority: optional Section: graphics Installed-Size: 632 Maintainer: Debian LXDE Maintainers Architecture: arm64 Source: gpicview (0.2.5-2) Version: 0.2.5-2+b1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk2.0-0 (>= 2.20.0), libjpeg62-turbo (>= 1.3.1), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libx11-6 Recommends: xdg-utils Description: lightweight image viewer GPicView is a lightweight GTK+ 2.x based image viewer with following features: . * Extremely lightweight and fast with low memory usage * Very suitable for default image viewer of desktop system * Simple and intuitive interface * Minimal lib dependency: Only pure GTK+ is used * Desktop independent: Doesn't require any specific desktop environment Homepage: http://www.lxde.org/ Package: grep Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 990 Maintainer: Anibal Monsalve Salazar Architecture: arm64 Multi-Arch: foreign Version: 3.3-1 Provides: rgrep Depends: dpkg (>= 1.15.4) | install-info Pre-Depends: libc6 (>= 2.17), libpcre3 Suggests: libpcre3 (>= 7.7) Conflicts: rgrep Description: GNU grep, egrep and fgrep 'grep' is a utility to search for text in files; it can be used from the command line or in scripts. Even if you don't want to use it, other packages on your system probably will. . The GNU family of grep utilities may be the "fastest grep in the west". GNU grep is based on a fast lazy-state deterministic matcher (about twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper search for a fixed string that eliminates impossible text from being considered by the full regexp matcher without necessarily having to look at every character. The result is typically many times faster than Unix grep or egrep. (Regular expressions containing backreferencing will run more slowly, however.) Homepage: http://www.gnu.org/software/grep/ Package: gsettings-desktop-schemas Status: install ok installed Priority: optional Section: gnome Installed-Size: 4186 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Version: 3.28.1-1 Depends: dconf-gsettings-backend | gsettings-backend Breaks: gnome-control-center (<< 1:3.19.92), gnome-settings-daemon (<< 3.19.92), gnome-shell (<< 3.10.0), mutter (<< 3.19.92), nautilus (<< 3.7.92) Description: GSettings desktop-wide schemas gsettings-desktop-schemas contains a collection of GSettings schemas for settings shared by various components of a desktop. Homepage: http://www.gnome.org/ Package: gstreamer1.0-alsa Status: install ok installed Priority: optional Section: libs Installed-Size: 1309 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u1 Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource Depends: libasound2 (>= 1.0.27), libc6 (>= 2.17), libglib2.0-0 (>= 2.40), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4) Suggests: alsa-utils (>= 0.9.0) Description: GStreamer plugin for ALSA GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the GStreamer plugin for the ALSA library. ALSA is the Advanced Linux Sound Architecture. Homepage: https://gstreamer.freedesktop.org Gstreamer-Elements: alsamidisrc, alsasink, alsasrc Gstreamer-Version: 1.14 Package: gstreamer1.0-doc Status: install ok installed Priority: optional Section: doc Installed-Size: 10573 Maintainer: Maintainers of GStreamer packages Architecture: all Multi-Arch: foreign Source: gstreamer1.0 Version: 1.14.4-1 Depends: libglib2.0-doc Recommends: libgstreamer1.0-dev (= 1.14.4-1) Description: GStreamer core documentation and manuals GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains documentation for core libraries and elements as well as: * the GStreamer Manual * the GStreamer Plugin Writers Guide * Various API docs Homepage: https://gstreamer.freedesktop.org Package: gstreamer1.0-gl Status: hold ok installed Priority: optional Section: libs Installed-Size: 1471 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u1 Replaces: gstreamer1.0-plugins-bad (<< 1.13.1) Provides: gstreamer1.0-videosink, gstreamer1.0-videosource Depends: libc6 (>= 2.27), libglib2.0-0 (>= 2.40), libgraphene-1.0-0 (>= 1.5.4), libgstreamer-gl1.0-0 (>= 1.14.4-2+deb10u1), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libx11-6 Breaks: gstreamer1.0-plugins-bad (<< 1.13.1) Description: GStreamer plugins for GL GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the GStreamer plugins for GL. Homepage: https://gstreamer.freedesktop.org Gstreamer-Elements: glcolorbalance, glcolorconvert, glcolorscale, gldeinterlace, gldifferencematte, gldownload, gleffects, gleffects_blur, gleffects_bulge, gleffects_fisheye, gleffects_glow, gleffects_heat, gleffects_identity, gleffects_laplacian, gleffects_lumaxpro, gleffects_mirror, gleffects_sepia, gleffects_sin, gleffects_sobel, gleffects_square, gleffects_squeeze, gleffects_stretch, gleffects_tunnel, gleffects_twirl, gleffects_xpro, gleffects_xray, glfilterapp, glfilterbin, glfiltercube, glfilterglass, glimagesink, glimagesinkelement, gloverlay, glshader, glsinkbin, glsrcbin, glstereosplit, gltestsrc, gltransformation, glupload, glvideoflip, glviewconvert Gstreamer-Version: 1.14 Package: gstreamer1.0-gtk3 Status: install ok installed Priority: optional Section: graphics Installed-Size: 1328 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-good1.0 Version: 1.14.4-1+deb10u3 Replaces: gstreamer1.0-plugins-bad (<< 1.13.1) Provides: gstreamer1.0-videosink Depends: libc6 (>= 2.17), libcairo2 (>= 1.10.0), libglib2.0-0 (>= 2.40), libgstreamer-gl1.0-0 (>= 1.14.4), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4), libgtk-3-0 (>= 3.16.2) Breaks: gstreamer1.0-plugins-bad (<< 1.13.1) Description: GStreamer plugin for GTK+3 GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the GStreamer plugin for GTK+3. Homepage: https://gstreamer.freedesktop.org Gstreamer-Elements: gtkglsink, gtksink Gstreamer-Version: 1.14 Package: gstreamer1.0-plugins-bad Status: hold ok installed Priority: extra Section: libs Installed-Size: 7911 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-bad1.0 Version: 1.14.4-1+deb10u2 Replaces: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2) Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource, gstreamer1.0-plugins-bad-faad, gstreamer1.0-plugins-bad-videoparsers, gstreamer1.0-videosink, gstreamer1.0-videosource, gstreamer1.0-visualization Depends: libass9 (>= 1:0.13.6), libbs2b0, libbz2-1.0, libc6 (>= 2.17), libcairo2 (>= 1.6.0), libchromaprint1 (>= 1.3.2), libcurl3-gnutls (>= 7.16.2), libdc1394-22, libde265-0 (>= 0.8), libdrm2 (>= 2.4.71), libdvdnav4 (>= 4.1.3), libdvdread4 (>= 4.1.3), libfaad2 (>= 2.7), libflite1 (>= 1.4-release-9~), libfluidsynth1 (>= 1.1.6-4~), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.43.2), libgme0 (>= 0.6.0), libgsm1 (>= 1.0.18), libgstreamer-gl1.0-0 (>= 1.14.4), libgstreamer-plugins-bad1.0-0 (= 1.14.4-1+deb10u2), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4), libgudev-1.0-0 (>= 146), libilmbase23 (>= 2.2.1), libkate1 (>= 0.4.1), liblcms2-2 (>= 2.7), liblilv-0-0 (>= 0.22.0~dfsg0), libmjpegutils-2.1-0, libmms0 (>= 0.4), libmodplug1 (>= 1:0.8.8.5), libmpcdec6 (>= 1:0.1~r435), libmpeg2encpp-2.1-0, libmplex2-2.1-0, libnettle6, libnice10 (>= 0.1.13), libofa0 (>= 0.9.3), libopenal1 (>= 1.14), libopenexr23, libopenjp2-7 (>= 2.0.0), libopenmpt0 (>= 0.3.0), libopus0 (>= 1.1), liborc-0.4-0 (>= 1:0.4.25), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.14.0), librsvg2-2 (>= 2.36.2), librtmp1 (>= 2.3), libsbc1, libsndfile1 (>= 1.0.20), libsoundtouch1 (>= 2.0.0), libspandsp2 (>= 0.0.6~pre18), libsrtp2-1 (>= 2.0.0+20170516), libssl1.1 (>= 1.1.0), libstdc++6 (>= 5), libusb-1.0-0 (>= 2:1.0.8), libvo-aacenc0, libvo-amrwbenc0, libvulkan1, libwayland-client0 (>= 1.11.0), libwebp6 (>= 0.5.1), libwebrtc-audio-processing1, libwildmidi2 (>= 0.2.3), libx11-6, libx265-165 (>= 2.9), libxcb1, libxml2 (>= 2.9.0), libzbar0 (>= 0.10), libzvbi0 (>= 0.2.35), gstreamer1.0-plugins-base Suggests: frei0r-plugins Breaks: gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2) Conflicts: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1) Description: GStreamer plugins from the "bad" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared to the rest. They might be close to being good quality, but they're missing something - be it a good code review, some documentation, a set of tests, a real live maintainer, or some actual wide use. Homepage: https://gstreamer.freedesktop.org Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/mpeg, mpegversion=(int)4, stream-format=(string){ raw, adts }; audio/mpeg, mpegversion=(int)2; audio/ms-gsm; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ay; audio/x-gbs; audio/x-gsm; audio/x-gym; audio/x-hes; audio/x-ircam; audio/x-it; audio/x-kss; audio/x-midi-event; audio/x-mod; audio/x-musepack, streamversion=(int){ 7, 8 }; audio/x-nist; audio/x-nsf; audio/x-paris; audio/x-rf64; audio/x-s3m; audio/x-sap; audio/x-sbc, parsed=(boolean)true; audio/x-sds; audio/x-siren, dct-length=(int)320; audio/x-spc; audio/x-stm; audio/x-svx; audio/x-vgm; audio/x-voc; audio/x-w64; audio/x-xi; audio/x-xm; image/jp2; image/jpeg; image/png; image/svg; image/svg+xml; image/webp; image/x-exr; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; subtitle/x-kate; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1 Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, assrender, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bpmdetect, bs2b, bulge, burn, bz2dec, bz2enc, camerabin, checksumsink, chopmydata, chromahold, chromaprint, chromium, circle, coloreffects, combdetect, compare, compositor, curlfilesink, curlftpsink, curlhttpsink, curlhttpsrc, curlsmtpsink, dashdemux, dc1394src, debugspy, decklinkaudiosink, decklinkaudiosrc, decklinkvideosink, decklinkvideosrc, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dtmfdetect, dvbbasebin, dvbsrc, dvbsuboverlay, dvdspu, errorignore, exclusion, faad, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, flitetestsrc, fluiddec, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, glmixerbin, glmosaic, glstereomix, glvideomixer, glvideomixerelement, gmedec, gsmdec, gsmenc, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, katedec, kateenc, kateparse, katetag, kmssink, ladspa-amp-so-amp-mono, ladspa-amp-so-amp-stereo, ladspa-delay-so-delay-5s, ladspa-filter-so-hpf, ladspa-filter-so-lpf, ladspa-sine-so-sine-faaa, ladspa-sine-so-sine-faac, ladspa-sine-so-sine-fcaa, ladspasrc-noise-so-noise-white, ladspasrc-sine-so-sine-fcac, lcms, libde265dec, marble, midiparse, mirror, mmssrc, modplug, mpeg2enc, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mplex, mssdemux, musepackdec, mxfdemux, mxfmux, netsim, ofa, openalsink, openalsrc, openexrdec, openjpegdec, openjpegenc, openmptdec, opusparse, pcapparse, perspective, pinch, pitch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, rotate, rsndvdbin, rsvgdec, rsvgoverlay, rtmpsink, rtmpsrc, rtpasfpay, rtponvifparse, rtponviftimestamp, sbcdec, sbcenc, scenechange, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, sirendec, sirenenc, smooth, solarize, spacescope, spanplc, spectrascope, speed, sphere, square, srtenc, srtpdec, srtpenc, stereo, stretch, synaescope, teletextdec, timecodestamper, tonegeneratesrc, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uvch264mjpgdemux, uvch264src, vc1parse, vcdsrc, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, voaacenc, voamrwbenc, vulkansink, vulkanupload, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcbin, webrtcdsp, webrtcechoprobe, webvttenc, wildmididec, wrappercamerabinsrc, x265enc, y4mdec, yadif, zbar, zebrastripe Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-kate; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-subtitle; application/x-subtitle-vtt; audio/AMR-WB; audio/mpeg, mpegversion=(int)4, stream-format=(string){ adts, raw }, base-profile=(string)lc; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; audio/x-gsm; audio/x-sbc, channel-mode=(string){ mono, dual, stereo, joint }, blocks=(int){ 4, 8, 12, 16 }, subbands=(int){ 4, 8 }, allocation-method=(string){ snr, loudness }, bitpool=(int)[ 2, 64 ]; audio/x-siren, dct-length=(int)320; image/jp2; image/webp; image/x-j2c, num-components=(int)[ 1, 4 ], sampling=(string){ RGB, BGR, RGBA, BGRA, YCbCr-4:4:4, YCbCr-4:2:2, YCbCr-4:2:0, YCbCr-4:1:1, GRAYSCALE, YCbCrA-4:4:4:4 }, colorspace=(string){ sRGB, sYUV, GRAY }; image/x-jpc, num-components=(int)[ 1, 4 ], sampling=(string){ RGB, BGR, RGBA, BGRA, YCbCr-4:4:4, YCbCr-4:2:2, YCbCr-4:2:0, YCbCr-4:1:1, GRAYSCALE, YCbCrA-4:4:4:4 }, colorspace=(string){ sRGB, sYUV, GRAY }; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; subtitle/x-kate; video/mpeg, systemstream=(boolean)false, mpegversion=(int){ 1, 2 }; video/mpeg, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 188, 192 }; video/x-h265, stream-format=(string)byte-stream, alignment=(string)au, profile=(string){ main }; video/x-ms-asf, parsed=(boolean)true Gstreamer-Uri-Sinks: rtmfp, rtmp, rtmpe, rtmps, rtmpt, rtmpte, rtmpts Gstreamer-Uri-Sources: dvb, dvd, http, https, mms, mmsh, mmst, mmsu, rtmfp, rtmp, rtmpe, rtmps, rtmpt, rtmpte, rtmpts, sdp, vcd Gstreamer-Version: 1.14 Package: gstreamer1.0-plugins-bad-dbg Status: hold ok installed Priority: extra Section: debug Installed-Size: 15014 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-bad1.0 Version: 1.14.4-1+deb10u2 Replaces: gstreamer1.0-plugins-base-dbg (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2) Depends: gstreamer1.0-plugins-bad (= 1.14.4-1+deb10u2) Breaks: gstreamer1.0-plugins-base-dbg (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2) Description: GStreamer plugins from the "bad" set (debug symbols) GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains unstripped shared libraries. It is provided primarily to provide a backtrace with names in a debugger, this makes it somewhat easier to interpret core dumps. The libraries are installed in /usr/lib/debug and are automatically used by gdb. Homepage: https://gstreamer.freedesktop.org Build-Ids: 0603956994682a20e4298aff26543817096f3dc9 0603be3b9f1d63d63a6bc7329425cebaa0349788 0a2536782805f00b77c1d844859c47dba45cc806 0d7b8ab164163de70bad17a67f1b83d46d7c76a4 0ef6a55bb5649b3e23eb80881a2bb10b51dab89a 15bb558f73e1c959ca473ab09f61d170933f7277 1bfd3ad96254d76e11338f92da47857e6dbaa563 20e9c7587225941bac34872c81923bd88eabfe57 233191306ff8c7c54a5c448ccf71469fef45127e 239eb24482234583ee4d721becca1671e28db2dc 2633323c92804a8223ec3ee81c7435a6cc41e863 270f6d0245b3bfb01c2f1e2940d64b01723c3182 288c1a096f7fdf2933f7496bdc1cccf869c5c7a6 2d9f7421b4ef0452c8d46cc395a0ffe4520b9f76 2de45897884edeb6e8e4f1eb4acab57969ca988f 358d166e58162b010e4d1d5aae5fcc7610fae073 37143fe7d91b24596cededab7c2515f5c6e7018f 37f9f429ce69109377d189a461dfcea911cec61b 384040948cf6e9db80fe8f5cd8411cc72115a9b4 389d6b1f3b61e3362fd28661f958b120f542e28a 399c0341af4de3791ad4c0ea8c9d977172f24526 3a808522cf5856ca93bdd469130810af37bd4ee3 3c144ab724bad4424181b544817f75c9f59102f9 3e393f8aa111a15ced2f5022cac0ec48c77c13cb 40c06e15fd30929d264244680dd41f49269088a5 410092431210a54417f972a7dfdcd6a0233cb2c3 42a9ec8208f1b21a95c31a776c152cb7d985fe50 431c2acb3f7c38a8affe0bd8797a4faeb4aae6a8 466d7621ede82786428a0162fe8b97933ec8447a 4b519da6b45065fd7854343757ba80d37c6ef4b2 4fd346036a3d69bd0e76c4d90b48a3695e23bfe4 504357ba124656dcd5364a5abf6e1b80bb591b67 53ced262f8d221b1a973eb790c300a6d090665ea 5475b20782c266ce618739a5069d81ba3a41223f 55df98d441b9e03ac3afd997150565844d142791 56ea2bc7c855181a42d73cd0d65e4eaa78a05485 573baec8dbd3a8c08d520870c234098206ce3ac9 57f6858106268e5840c1bd8edf4a1c3a4af60362 58291fbe0f871b49e56277be6e05b983eded4642 5a0f3e2110c7e7af80f75c6ac5e3bb7e371d83d1 5a4541c8c8d9f4a442436a9181ee7c3d896105b6 5f0345dfa6208e5351fd6ab281dffc0309f4548a 5f94b319d3d465c0715c311edb7c708a70b4ed08 6510f8cf6443dc7139002fe2e667375623424545 65f87b4e4385f81ee90b5eb7ae85502fb8739409 679a239402fbb9671e02f422aed91be87445f9c8 6bb7793b170a5af36a87b590c6419751a5430f89 6bf200dfe014bea9a4b06ef758ac7b8e02353ad6 6d028e62a6a67fd74abac208d2590ae8b453dfee 6e311e42084e30cd61bb4f1950e7b32c3710e00c 6e7ecbb2d01331921bca4a5f9a74f28dc0498965 6f2f6dd918be00833e00baafe38eb84ce51ae1b7 727ac171f227e5acf2cd5d9b8a5d68e6f81f9520 752490d7caab64d18016144c92e7bff420250852 77055a261e5f0784bdc88b098df5f422aae0888d 77fadf3a7c7f6bfc4cc7222b5326c60fccb63904 790b3a6cb7b34fba5c0f4f34a6b5751a03d03778 793b532405384e1bef8251f206909bf9270476f3 7a4a8f74ae754d1a37cb022c3449c694473ffde9 7b55b3f1d395dfeb3ed0c1636e968381f9300a20 7c79e3c5ef221460b2061c5197d4f940007b8716 7d66b017727a269920c1c0cc83e18e143ebc5bf2 7e0c7acfc5afc7b0c53783f75bf4a1f83dcbd852 7f5291dcbbae5f755e782c880252c1c9b02c8888 81aa2e0734d45f9e2df3e1c18b79af1d146a332a 8479a392d9b6524363e3cf94c4b60be06847df35 84fa78dad657e62a86987c874dc31ab859c03ea9 858596a6657e12b4d08c3e10b78d85d216f6d14e 86f15007150e4e4a38630a2ca13a2446f9601870 8dc1a66387ae8f619871b3d8ec104e1b0fc1e246 915aa428986f5a40c36de5557806c867611d81d7 919a6f0ca67f37a1c8ef086b77f44bd5a312140c 91b77be0444e89bf53eaeb498f5a927002f55d7c 924f73105e38d7c12fef3d6e2c3624ba5ffb79fe 92951bb06d14a1e61b5b8bb4f1d7e62cef23dbf9 97206094e1907aa34a904bb7c75e11f3e374aaba 998eab3d157087102abf22a1b383a007c804416f 9d9fb53447b185f45ab93d7ec5314aafb9f58017 a05ea2cc7855d521db9cce0b5eb24cc2f3431c16 a1ca31118193922d3542159d01a309a779ef6b88 a284c8a6ef4d7ac0ebb43d7d81c1ca193c7ce008 a57348d7661b8d0494daf28ad82a83a5efcbe96b a607422989b725043c8984330fc93df0caf2d66b a714dd746143c6f72af27b43f6c866440d854515 a9608516873930df167ce53974069b3fb2c4ebe7 aadd6c55c5bc2b6659039246676d11a38e9dcec2 aafd1c03a6dd9e963240a050b4d9bf602ac9fa82 b28fead56f43ba00de81f96cfd3428b97f7c2842 b5e039ca1544d1e6d00c719322e70319ababc8a7 b954d1ebe10f83259be863b0fcef2655ccf8b1ac b977d89bc1583b3e7803312cd7d0958e1b31e89c ba6afcbe49b4b67e4aa249e0aa4246665ef2d420 bd77d2d60bbd72d7d247090081dfda9e9655b5fc c1aff8b235c1e6203e2605e68471260dc8ffbf04 c443552dcd8aed84be43eb5b89e8ded8204766d8 c80949e57c187b61e7c492e8a0ea527d61e2beb8 ca7d6a0e9c1ec4022ba5e4f7007a9a0ed8175d57 cbce2b4b715918c6efc806ef06e12ec314e83ccd ce81606e3e2fe1d0d4deb21e937c6a1dea8aac13 cf0ab648958310d4e67737f20e71e6e71e470cd6 d06a094a8fe95d7dcea06575aba4e304031a192b d26606bc0ff0c4cefe20d6b1c5210dc35f7f3964 d3f75b7f0788a8526e55ca29ba2dd823dc269b55 d421d0814ce86c4f3071c23ec5c27097948a3b48 d608b00223ac3b385b490adf1721a988121f6f7c d6cb903ba62748bbfb6dbf3c010b4911bf582dfa d77cce8e579a131e083fccfe5062907a92243ab6 d907c6e994dcddd686ff84c6c70ce8c0774510c1 dd597621b9de25ec8e3420b7dc3b78b78096ae4b e474ab638d03b507e697c27ec5c9c47ac5695c3f e4a8daff59fa244a5d473f2a95fff764bc26e7d7 e81ca03370cb3682d99778f49b0b936e09dffb99 ed64bce75ed2fbcda3a2f67a153f08517af4402f f500a175db5af5e4a6372ac64258b5668052d598 f5bee38eebe4bfed32a9405562f0fd7b0ce0256f f67d8221ac6eb91bd50e1aff41969c1e4e070950 f7b417f489248ff31268f37d1dc0697491b7de2b f8b55ffb7103cdf20009a4d2c64c9919874a21bb fb07d97bb8b5417eed4e64bc166db26ff85b2bef fcd3e373f06684ec7afece37b16cef4231b39d7b fd157e7bbb80d4f51069b170ce954f983f25623b fd59b5a1b370d78da0956e6a0f1b5a78fc672716 febb7702c94b251f7b77051997a4cd735c7b587b 04ae433204e294cc20952419f9404ba4e0d05b24 0e4528938c78856fd469513d2cec42a0ea500f4f 1663eb68a02c254510f09a857f8cb0e907a140f1 23c4a89ffc693f335ab3e6514f4b90265bd272aa 31ba246f3d598b5ccdd9cbc0e4386ffad79cb13f 34ed5e78432f6f59b2db4e67ba0d32525891a36f 3627cd3a9ce8c1ecf6cd745faa6efa8b6b8957e9 598bf73c733f73fcaa56c4c54ea81cb02d3d7ce6 5ffac8e12e3106d61d7f8d9a06228fa77868092a 7bb6659af7324f98247e0c18d4f7261f661068a9 84c50a97960223524a2abfffb8f548b10b2d84a2 c06bd8adc4a97a996912b304212ec5dad43281aa e0c0ba69938890d6105176f92303d14322898827 f9b417032663937be62620c5b56b2896903a9047 7141167c6896609e557dc08664e0c2c72efd8d2f Package: gstreamer1.0-plugins-bad-doc Status: hold ok installed Priority: extra Section: doc Installed-Size: 7496 Maintainer: Maintainers of GStreamer packages Architecture: all Multi-Arch: foreign Source: gst-plugins-bad1.0 Version: 1.14.4-1+deb10u2 Depends: gstreamer1.0-doc, gstreamer1.0-plugins-base-doc Description: GStreamer documentation for plugins from the "bad" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared to the rest. They might be close to being good quality, but they're missing something - be it a good code review, some documentation, a set of tests, a real live maintainer, or some actual wide use. . This package contains the documentation for plugins from the "bad" set. Homepage: https://gstreamer.freedesktop.org Package: gstreamer1.0-plugins-base Status: hold ok installed Priority: optional Section: libs Installed-Size: 3090 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u1 Replaces: gstreamer1.0-plugins-bad (<< 1.13.1) Provides: gstreamer1.0-audiosource, gstreamer1.0-videosource Depends: libc6 (>= 2.17), libcdparanoia0 (>= 3.10.2+debian), libglib2.0-0 (>= 2.40), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4), libogg0 (>= 1.0rc3), libopus0 (>= 1.1), liborc-0.4-0 (>= 1:0.4.25), libtheora0 (>= 1.1), libvisual-0.4-0 (>= 0.4.0), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2) Suggests: gvfs Breaks: gstreamer1.0-plugins-bad (<< 1.13.1) Description: GStreamer plugins from the "base" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the GStreamer plugins from the "base" set, an essential exemplary set of elements. Homepage: https://gstreamer.freedesktop.org Gstreamer-Decoders: application/kate; application/ogg; application/x-ass; application/x-ogg-avi; application/x-ogm-audio; application/x-ogm-text; application/x-ogm-video; application/x-ssa; application/x-subtitle; application/x-subtitle-dks; application/x-subtitle-lrc; application/x-subtitle-mpl2; application/x-subtitle-qttext; application/x-subtitle-sami; application/x-subtitle-tmplayer; application/x-subtitle-vtt; audio/ogg; audio/x-opus, channel-mapping-family=(int)[ 1, 255 ], stream-count=(int)[ 1, 255 ], coupled-count=(int)[ 0, 255 ]; audio/x-opus, channel-mapping-family=(int)0; audio/x-unaligned-raw, format=(string){ S8, U8, S16LE, S16BE, U16LE, U16BE, S24_32LE, S24_32BE, U24_32LE, U24_32BE, S32LE, S32BE, U32LE, U32BE, S24LE, S24BE, U24LE, U24BE, S20LE, S20BE, U20LE, U20BE, S18LE, S18BE, U18LE, U18BE, F32LE, F32BE, F64LE, F64BE }, layout=(string){ interleaved, non-interleaved }; audio/x-vorbis; video/ogg; video/x-theora; video/x-unaligned-raw, format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, GRAY8, GRAY16_BE, GRAY16_LE, v308, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10BE, I420_10LE, I422_10BE, I422_10LE, Y444_10BE, Y444_10LE, GBR, GBR_10BE, GBR_10LE, NV16, NV24, NV12_64Z32, A420_10BE, A420_10LE, A422_10BE, A422_10LE, A444_10BE, A444_10LE, NV61, P010_10BE, P010_10LE, IYU2, VYUY, GBRA, GBRA_10BE, GBRA_10LE, GBR_12BE, GBR_12LE, GBRA_12BE, GBRA_12LE, I420_12BE, I420_12LE, I422_12BE, I422_12LE, Y444_12BE, Y444_12LE, GRAY10_LE32, NV12_10LE32, NV16_10LE32, NV12_10LE40 } Gstreamer-Elements: adder, appsink, appsrc, audioconvert, audiointerleave, audiomixer, audiorate, audioresample, audiotestsrc, cdparanoiasrc, decodebin, decodebin3, encodebin, giosink, giosrc, giostreamsink, giostreamsrc, liveadder, multifdsink, multisocketsink, oggaviparse, oggdemux, oggmux, oggparse, ogmaudioparse, ogmtextparse, ogmvideoparse, opusdec, opusenc, parsebin, playbin, playbin3, playsink, rawaudioparse, rawvideoparse, socketsrc, ssaparse, streamsynchronizer, subparse, subtitleoverlay, tcpclientsink, tcpclientsrc, tcpserversink, tcpserversrc, theoradec, theoraenc, theoraparse, unalignedaudioparse, unalignedvideoparse, uridecodebin, uridecodebin3, urisourcebin, videoconvert, videorate, videoscale, videotestsrc, volume, vorbisdec, vorbisenc, vorbisparse, vorbistag Gstreamer-Encoders: application/ogg; audio/ogg; audio/x-opus; audio/x-vorbis; video/ogg; video/x-theora Gstreamer-Uri-Sinks: appsink, file, resource Gstreamer-Uri-Sources: appsrc, cdda, file, resource Gstreamer-Version: 1.14 Package: gstreamer1.0-plugins-base-apps Status: install ok installed Priority: optional Section: utils Installed-Size: 1313 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u3 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.40), libgstreamer-plugins-base1.0-0 (>= 1.14.0), libgstreamer1.0-0 (>= 1.14.4), gstreamer1.0-tools Description: GStreamer helper programs from the "base" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains helper programs from the "base" set, an essential exemplary set of elements. Homepage: https://gstreamer.freedesktop.org Package: gstreamer1.0-plugins-base-dbg Status: hold ok installed Priority: extra Section: debug Installed-Size: 8861 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u1 Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.11.90) Depends: gstreamer1.0-alsa (= 1.14.4-2+deb10u1), gstreamer1.0-plugins-base (= 1.14.4-2+deb10u1), gstreamer1.0-x (= 1.14.4-2+deb10u1), libgstreamer-plugins-base1.0-0 (= 1.14.4-2+deb10u1) Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.11.90) Description: GStreamer plugins from the "base" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains unstripped shared libraries. It is provided primarily to provide a backtrace with names in a debugger, this makes it somewhat easier to interpret core dumps. The libraries are installed in /usr/lib/debug and are automatically used by gdb. Homepage: https://gstreamer.freedesktop.org Build-Ids: 19f6ad650115bb6a4998a8ae9ebad572a0605317 755bcec61923406bc379d15ab9183f1ac91070ac 8f55288d77f2ed3b27579bb3fefcce64182a7c4d 0bee3278720814b0745daeb2657a53087e931e7e 5617a09d643730ae87e1f132f5c0c7885823e05c 6bd08fe7fbb4fafa02977bdbcb89d573a33957b7 8ca3fe4d5faa3c4e72f3d5e31736d445e813d468 9b7fac2dbb229986270a9c7a4cfe2413e88fd4d8 9fe1eaf52e83fbae4054720dbe6b858a62354ef2 c05747a89c865dac26e523d4e6e4bcd7bea72e80 e06376b716b1160c7a058eb1d0235f4b05a063c8 e0718e0acd05f997cc92d55b2a25b175c1971a11 f0dba83d4fc1782b54aa77c071b496a862c1b17b fcc12348459a4bb9a81ff27784a0b221131188ab fe62ddf0997bac2684f35ff8e302c9719e0a4fb4 c68c1b56e5172fbd3f46dd0fc337d4909386f6ab 0364a2260d51b7a76c7ff9e1704547faa87ca67c 0c4e4056443089d80781dc5338ae50245db3d62c 0d71091f123d4417630956edb5269edb1628630a 229c5aca626cae8d36e80333649a7896855b3328 23fa2c69043421aef242ffea8497b131dbfa6b24 32f246af085989ebc09892f12c30e15271015ba7 3b9161a3d0b54265926bc35d42a9a38265f189d4 3f03d72a74bddf78676ba6e0a04dd70fe2dd5d37 44d25879f6e160b540e0a9e865ff0f0cd0453c11 4a257ab0502741d9372f84ee3794887f3270755b 571558e1544f4e64286c582b1cb8d59d6321d280 5c58817efc5d3acfc27bf7ed2c4a7113e2651b59 5fca0f304b29c4d88ce83a6da22271e3baec89af 64f02766fff0d0f575faf1428b8cc051ba7c435c 70f641c8d4b2404da2f28aca90d5709219f7e35b 824ff6972ab838858fb9b755036fb45319df36b5 940e1bf6c051f2e5068ecd4d0dc04cd8c005ad26 9aba126fbe72b5102c4fa449772197dc3d3533d9 c128126fb8b19ab5de51ba59e452d0311621926a c17478267e958cf5b24615803e2db0c36644934a c1bd429be4fa79d7a0a98cd6bc0db50f0dbace04 c2882124e66b524fcada66b982e9e707d7fb6b63 c2c201ca63cb83046d5924658491b429a5dc8d2a db7206dc2cabe9f622bf352c50a6b10cfc2f6135 e7a9efe5cae5e0ff9cd9bb5e2880e1af3871ec8e f842ada727085198c1636e0cef5c8f2fff1d0432 0842db2d589d0f89a411f936fa93c6046d57c9f5 609f086e8f991673838cf8b1be8a056713a63ef6 8c87f315427677dcf287fbb39904d938ab21faeb 73165050c741790cd42ce26cf117881003e1ca95 Package: gstreamer1.0-plugins-base-doc Status: hold ok installed Priority: optional Section: doc Installed-Size: 9823 Maintainer: Maintainers of GStreamer packages Architecture: all Multi-Arch: foreign Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u1 Depends: libglib2.0-doc, gstreamer1.0-doc Description: GStreamer documentation for plugins from the "base" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains documentation for plugins from the "base" set, an essential exemplary set of elements. Homepage: https://gstreamer.freedesktop.org Package: gstreamer1.0-plugins-good Status: hold ok installed Priority: optional Section: libs Installed-Size: 6985 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-good1.0 Version: 1.14.4-1+deb10u1 Replaces: gstreamer1.0-plugins-bad (<< 1.13.1), gstreamer1.0-plugins-ugly (<< 1.13.1) Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource, gstreamer1.0-videosink, gstreamer1.0-videosource, gstreamer1.0-visualization Depends: libaa1 (>= 1.4p5), libavc1394-0 (>= 0.5.3), libbz2-1.0, libc6 (>= 2.17), libcaca0 (>= 0.99.beta17-1), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.10.0), libdv4 (>= 1.0.0), libflac8 (>= 1.3.0), libgcc1 (>= 1:3.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.43.2), libgstreamer-plugins-base1.0-0 (>= 1.14.4-2+deb10u1), libgstreamer1.0-0 (>= 1.14.4), libgudev-1.0-0 (>= 146), libiec61883-0 (>= 1.2.0), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libjpeg62-turbo (>= 1.3.1), libmp3lame0 (>= 3.100), libmpg123-0 (>= 1.6.2), liborc-0.4-0 (>= 1:0.4.25), libpng16-16 (>= 1.6.2-1), libraw1394-11, librga2, libshout3 (>= 2.2.2), libsoup2.4-1 (>= 2.48), libspeex1 (>= 1.2~beta3-1), libstdc++6 (>= 5), libtag1v5 (>= 1.9.1-2.2~), libtwolame0 (>= 0.3.10), libv4l-0 (>= 0.5.0), libvpx5 (>= 1.6.0), libwavpack1 (>= 4.60), libx11-6, libxdamage1 (>= 1:1.1), libxext6, libxfixes3, zlib1g (>= 1:1.1.4), gstreamer1.0-plugins-base Recommends: gstreamer1.0-x Breaks: gstreamer1.0-plugins-bad (<< 1.13.1), gstreamer1.0-plugins-ugly (<< 1.13.1) Description: GStreamer plugins from the "good" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the GStreamer plugins from the "good" set, a set of good-quality plug-ins under the LGPL license. Homepage: https://gstreamer.freedesktop.org Gstreamer-Decoders: application/x-3gp; application/x-apetag; application/x-icy; application/x-id3; application/x-navi-animation; application/x-rtp, media=(string)audio, payload=(int)[ 96, 127 ], encoding-name=(string){ TELEPHONE-EVENT, SBC, OPUS, X-GST-OPUS-DRAFT-SPITTKA-00 }; application/x-rtp, payload=(int)[ 96, 127 ], media=(string){ audio, video }, encoding-name=(string){ X-QT, X-QUICKTIME }; application/x-rtp, media=(string)video, encoding-name=(string)RAW, sampling=(string){ RGB, RGBA, BGR, BGRA, YCbCr-4:4:4, YCbCr-4:2:2, YCbCr-4:2:0, YCbCr-4:1:1 }; application/x-rtp, media=(string){ video, audio, application }, encoding-name=(string)MPEG4-GENERIC, mode=(string){ generic, CELP-cbr, CELP-vbr, AAC-lbr, AAC-hbr }; application/x-rtp, media=(string)video, sampling=(string){ RGB, BGR, RGBA, BGRA, YCbCrA, YCbCr-4:4:4, YCbCr-4:2:2, YCbCr-4:2:0, YCbCr-4:1:1, GRAYSCALE }, encoding-name=(string)JPEG2000; application/x-rtp, media=(string)video, colorspace=(string){ sRGB, sYUV, GRAY }, encoding-name=(string)JPEG2000; application/x-rtp, media=(string)video, payload=(int)31, encoding-name=(string)H261; application/x-rtp, media=(string)video, payload=(int)[ 96, 127 ], encoding-name=(string)H261; application/x-rtp, media=(string)audio, encoding-name=(string){ AMR, AMR-WB }, octet-align=(string)1; application/x-rtp, media=(string){ video, audio }, encoding-name=(string)DV, encode=(string){ SD-VCR/525-60, SD-VCR/625-50, HD-VCR/1125-60, HD-VCR/1250-50, SDL-VCR/525-60, SDL-VCR/625-50, 306M/525-60, 306M/625-50, 314M-25/525-60, 314M-25/625-50, 314M-50/525-60, 314M-50/625-50 }; application/x-rtp, media=(string)video, encoding-name=(string){ VP9, VP9-DRAFT-IETF-01, VP8, VP8-DRAFT-IETF-01, THEORA, X-SV3V-ES, X-SORENSON-VIDEO, X-SORENSONVIDEO, X-SorensonVideo, MP4V-ES, MP2T, MP2T-ES, MP1S, JPEG, H265, H264, H263, H263-1998, H263-2000, MPV }; application/x-rtp, media=(string)audio, encoding-name=(string){ VORBIS, SPEEX, SIREN, X-QDM, QCELP, MP4A-LATM, L24, L16, L8, MPA-ROBUST, X-MP3-DRAFT-00, X-MP3-DRAFT-01, X-MP3-DRAFT-02, X-MP3-DRAFT-03, X-MP3-DRAFT-04, X-MP3-DRAFT-05, X-MP3-DRAFT-06, MPA, PCMU, PCMA, GSM, G729, G726, G726-16, G726-24, G726-32, G726-40, AAL2-G726-16, AAL2-G726-24, AAL2-G726-32, AAL2-G726-40, G723, G722, ILBC, CELT, BV16, BV32, AC3 }; application/x-rtp, media=(string)audio, payload=(int){ 12, 10, 11, 14, 0, 8, 3, 18, 4, 9 }; application/x-rtp, media=(string)video, payload=(int){ 33, 26, 34, 32 }; application/x-rtp, media=(string)other, encoding-name=(string)MP1S; application/x-rtp, media=(string)application, encoding-name=(string){ SMPTE336M, X-GST }; application/x-subtitle-avi; audio/ac3; audio/mpeg, mpegversion=(int){ 1, 2, 4 }; audio/webm; audio/x-ac3; audio/x-alaw; audio/x-amr-nb-sh; audio/x-amr-wb-sh; audio/x-au; audio/x-dts; audio/x-eac3; audio/x-flac; audio/x-m4a; audio/x-matroska; audio/x-mulaw; audio/x-private1-ac3; audio/x-private1-dts; audio/x-sbc; audio/x-speex; audio/x-wav; audio/x-wavpack; image/bmp; image/jpeg; image/png; image/svg; image/svg+xml; image/tiff; image/vnd.wap.wbmp; image/x-MS-bmp; image/x-bitmap; image/x-bmp; image/x-cmu-raster; image/x-icon; image/x-pcx; image/x-pixmap; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; image/x-sun-raster; image/x-tga; multipart/x-mixed-replace; video/mj2; video/quicktime; video/webm; video/x-dv, systemstream=(boolean){ false, true }; video/x-fli; video/x-flv; video/x-matroska; video/x-matroska-3d; video/x-msvideo; video/x-vp8; video/x-vp9 Gstreamer-Elements: 3gppmux, aacparse, aasink, ac3parse, agingtv, alawdec, alawenc, alpha, alphacolor, amrparse, apedemux, apev2mux, aspectratiocrop, asteriskh263, audioamplify, audiochebband, audiocheblimit, audiodynamic, audioecho, audiofirfilter, audioiirfilter, audioinvert, audiokaraoke, audiopanorama, audiowsincband, audiowsinclimit, auparse, autoaudiosink, autoaudiosrc, autovideosink, autovideosrc, avidemux, avimux, avisubtitle, breakmydata, cacasink, cairooverlay, capssetter, cpureport, cutter, dcaparse, deinterlace, deinterleave, dicetv, dtmfsrc, dv1394src, dvdec, dvdemux, dynudpsink, edgetv, equalizer-10bands, equalizer-3bands, equalizer-nbands, flacdec, flacenc, flacparse, flactag, flvdemux, flvmux, flxdec, gamma, gdkpixbufdec, gdkpixbufoverlay, gdkpixbufsink, goom, goom2k1, hdv1394src, icydemux, id3demux, id3v2mux, imagefreeze, interleave, ismlmux, jackaudiosink, jackaudiosrc, jpegdec, jpegenc, lamemp3enc, level, matroskademux, matroskamux, matroskaparse, mj2mux, monoscope, mp4mux, mpegaudioparse, mpg123audiodec, mulawdec, mulawenc, multifilesink, multifilesrc, multipartdemux, multipartmux, multiudpsink, navigationtest, navseek, optv, oss4sink, oss4src, osssink, osssrc, pngdec, pngenc, progressreport, pushfilesrc, qtdemux, qtmoovrecover, qtmux, quarktv, radioactv, revtv, rganalysis, rglimiter, rgvolume, rippletv, rndbuffersize, rtpL16depay, rtpL16pay, rtpL24depay, rtpL24pay, rtpL8depay, rtpL8pay, rtpac3depay, rtpac3pay, rtpamrdepay, rtpamrpay, rtpbin, rtpbvdepay, rtpbvpay, rtpceltdepay, rtpceltpay, rtpdec, rtpdtmfdepay, rtpdtmfmux, rtpdtmfsrc, rtpdvdepay, rtpdvpay, rtpfunnel, rtpg722depay, rtpg722pay, rtpg723depay, rtpg723pay, rtpg726depay, rtpg726pay, rtpg729depay, rtpg729pay, rtpgsmdepay, rtpgsmpay, rtpgstdepay, rtpgstpay, rtph261depay, rtph261pay, rtph263depay, rtph263pay, rtph263pdepay, rtph263ppay, rtph264depay, rtph264pay, rtph265depay, rtph265pay, rtpilbcdepay, rtpilbcpay, rtpj2kdepay, rtpj2kpay, rtpjitterbuffer, rtpjpegdepay, rtpjpegpay, rtpklvdepay, rtpklvpay, rtpmp1sdepay, rtpmp2tdepay, rtpmp2tpay, rtpmp4adepay, rtpmp4apay, rtpmp4gdepay, rtpmp4gpay, rtpmp4vdepay, rtpmp4vpay, rtpmpadepay, rtpmpapay, rtpmparobustdepay, rtpmpvdepay, rtpmpvpay, rtpmux, rtpopusdepay, rtpopuspay, rtppcmadepay, rtppcmapay, rtppcmudepay, rtppcmupay, rtpptdemux, rtpqcelpdepay, rtpqdm2depay, rtpreddec, rtpredenc, rtprtxqueue, rtprtxreceive, rtprtxsend, rtpsbcdepay, rtpsbcpay, rtpsession, rtpsirendepay, rtpsirenpay, rtpspeexdepay, rtpspeexpay, rtpssrcdemux, rtpstorage, rtpstreamdepay, rtpstreampay, rtpsv3vdepay, rtptheoradepay, rtptheorapay, rtpulpfecdec, rtpulpfecenc, rtpvorbisdepay, rtpvorbispay, rtpvp8depay, rtpvp8pay, rtpvp9depay, rtpvp9pay, rtpvrawdepay, rtpvrawpay, rtpxqtdepay, rtspsrc, sbcparse, scaletempo, shagadelictv, shapewipe, shout2send, smpte, smptealpha, souphttpclientsink, souphttpsrc, spectrum, speexdec, speexenc, splitfilesrc, splitmuxsink, splitmuxsrc, streaktv, taginject, testsink, twolamemp2enc, udpsink, udpsrc, v4l2radio, v4l2sink, v4l2src, vertigotv, videobalance, videobox, videocrop, videoflip, videomedian, videomixer, vp8dec, vp8enc, vp9dec, vp9enc, warptv, wavenc, wavpackdec, wavpackenc, wavpackparse, wavparse, webmmux, ximagesrc, y4menc Gstreamer-Encoders: application/x-rtcp-stream; application/x-rtp; application/x-rtp-stream; application/x-srtcp-stream; application/x-srtp-stream; application/x-yuv4mpeg, y4mversion=(int)2; audio/mpeg, mpegversion=(int)1, layer=(int){ 3, 2 }; audio/webm; audio/x-alaw; audio/x-flac; audio/x-matroska; audio/x-mulaw; audio/x-rf64; audio/x-speex; audio/x-wav; audio/x-wavpack-correction, framed=(boolean)true; image/jpeg, sof-marker=(int){ 0, 1, 2, 4, 9 }; image/png; multipart/x-mixed-replace; video/mj2; video/quicktime; video/webm; video/x-flv; video/x-matroska; video/x-matroska-3d; video/x-msvideo; video/x-vp8, profile=(string){ 0, 1, 2, 3 }; video/x-vp9, profile=(string){ 0, 1, 2, 3 } Gstreamer-Uri-Sinks: udp Gstreamer-Uri-Sources: dv, hdv, http, https, icy, icyx, multifile, pushfile, radio, rtsp, rtsp-sdp, rtsph, rtsps, rtspsh, rtspst, rtspsu, rtspt, rtspu, splitfile, splitmux, udp, v4l2 Gstreamer-Version: 1.14 Package: gstreamer1.0-plugins-good-doc Status: hold ok installed Priority: optional Section: doc Installed-Size: 5371 Maintainer: Maintainers of GStreamer packages Architecture: all Multi-Arch: foreign Source: gst-plugins-good1.0 Version: 1.14.4-1+deb10u1 Depends: gstreamer1.0-doc, gstreamer1.0-plugins-base-doc Description: GStreamer documentation for plugins from the "good" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains documentation for plugins from the "good" set, a set of good-quality plug-ins under the LGPL license. Homepage: https://gstreamer.freedesktop.org Package: gstreamer1.0-plugins-ugly Status: hold ok installed Priority: optional Section: libs Installed-Size: 948 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-ugly1.0 Version: 1.14.4-1+deb10u1 Replaces: gstreamer1.0-plugins-bad (<< 1.7.2), gstreamer1.0-plugins-ugly-amr (<< 1.11.91) Provides: gstreamer1.0-plugins-ugly-amr Depends: libc6 (>= 2.17), libcdio18 (>= 2.0.0), libdvdread4 (>= 4.1.3), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.40), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4), libmpeg2-4 (>= 0.5.1), libopencore-amrnb0, libopencore-amrwb0, libsidplay1v5, libstdc++6 (>= 5), libx264-155 Breaks: gstreamer1.0-plugins-bad (<< 1.7.2) Conflicts: gstreamer1.0-plugins-ugly-amr (<< 1.11.91) Description: GStreamer plugins from the "ugly" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains plugins from the "ugly" set, a set of good-quality plug-ins that might pose distribution problems. Homepage: https://gstreamer.freedesktop.org Gstreamer-Decoders: application/vnd.rn-realmedia; application/x-pn-realaudio; application/x-rdt, media=(string)application, encoding-name=(string)X-REAL-RDT; application/x-rtp, media=(string){ application, video, audio }, payload=(int)[ 96, 127 ], encoding-name=(string)X-ASF-PF; audio/AMR; audio/AMR-WB; audio/x-lpcm; audio/x-private-ts-lpcm; audio/x-private1-lpcm; audio/x-private2-lpcm; audio/x-sid; video/mpeg, mpegversion=(int)[ 1, 2 ], systemstream=(boolean)false; video/x-ms-asf Gstreamer-Elements: amrnbdec, amrnbenc, amrwbdec, asfdemux, cdiocddasrc, dvdlpcmdec, dvdreadsrc, dvdsubdec, dvdsubparse, mpeg2dec, pnmsrc, rademux, rdtdepay, rdtmanager, rmdemux, rtpasfdepay, rtspreal, rtspwms, siddec, x264enc, xingmux Gstreamer-Encoders: audio/AMR; audio/mpeg, mpegversion=(int)1, layer=(int)[ 1, 3 ]; video/x-h264, stream-format=(string){ avc, byte-stream }, alignment=(string)au, profile=(string){ high-4:4:4, high-4:2:2, high-10, high, main, baseline, constrained-baseline, high-4:4:4-intra, high-4:2:2-intra, high-10-intra } Gstreamer-Uri-Sources: cdda, dvd, pnm Gstreamer-Version: 1.14 Package: gstreamer1.0-plugins-ugly-dbg Status: hold ok installed Priority: extra Section: debug Installed-Size: 1136 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-ugly1.0 Version: 1.14.4-1+deb10u1 Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.7.2) Depends: gstreamer1.0-plugins-ugly (= 1.14.4-1+deb10u1) Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.7.2) Description: GStreamer plugins from the "ugly" set (debug symbols) GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains unstripped shared libraries. It is provided primarily to provide a backtrace with names in a debugger, this makes it somewhat easier to interpret core dumps. The libraries are installed in /usr/lib/debug and are automatically used by gdb. Homepage: https://gstreamer.freedesktop.org Build-Ids: 063477713e6b26441abfc643ce71a6a1ab41c12b 1484acf10f426dedd0726a2f59940e98d03b4c66 27688b356ed03563b2f507fea2fc8b996c9b10dd 3a8533f199d8b01b7123aa9b82a20b45956df4a3 7ebe77c828aee42b4a130d353de6f56853d9ead4 7eced6a9fccaeb486c7026d0d808c5f785ac2ae4 a52aa75ece0eb3fbb343b40bd72715c6c56f7896 aa72de5d3051f9fa1ad2e6500a426d5c14112eb5 bab746542a5bc4ceff30f45d5330f5451ef7dd3c bec1060e3a39402b4dbba1065766008bb9e1d3b3 c07ed0f8c8ac61a3d2b51f42dde0837d8e57c2c3 ce651f12c6c83e4f64ae99999dedc229c1475362 Package: gstreamer1.0-plugins-ugly-doc Status: hold ok installed Priority: optional Section: doc Installed-Size: 488 Maintainer: Maintainers of GStreamer packages Architecture: all Multi-Arch: foreign Source: gst-plugins-ugly1.0 Version: 1.14.4-1+deb10u1 Depends: gstreamer1.0-doc, gstreamer1.0-plugins-base-doc Description: GStreamer documentation for plugins from the "ugly" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains documentation for plugins from the "ugly" set, a set of good-quality plug-ins that might pose distribution problems. Homepage: https://gstreamer.freedesktop.org Package: gstreamer1.0-pulseaudio Status: install ok installed Priority: optional Section: sound Installed-Size: 1393 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-good1.0 Version: 1.14.4-1+deb10u3 Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.40), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4), libpulse0 (>= 2.0) Description: GStreamer plugin for PulseAudio GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the GStreamer plugin for PulseAudio, a sound server for POSIX and WIN32 systems. Homepage: https://gstreamer.freedesktop.org Gstreamer-Elements: pulsesink, pulsesrc Gstreamer-Version: 1.14 Package: gstreamer1.0-rockchip1 Status: hold ok installed Priority: optional Section: libs Installed-Size: 184 Maintainer: Jeffy Chen Architecture: arm64 Source: gstreamer1.0-rockchip Version: 1.14-4 Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.71), libglib2.0-0 (>= 2.53.1), libgstreamer-plugins-base1.0-0 (>= 1.14), libgstreamer1.0-0 (>= 1.14), librga2, librockchip-mpp1, libx11-6 Description: The Gstreamer plugins for Rockchip platforms. Homepage: https://github.com/rockchip-linux/gstreamer-rockchip Package: gstreamer1.0-tools Status: hold ok installed Priority: optional Section: utils Installed-Size: 1184 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Source: gstreamer1.0 Version: 1.14.4-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.40), libgstreamer1.0-0 (>= 1.14.4) Suggests: gstreamer1.0-plugins-base Description: Tools for use with GStreamer GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains versioned command-line tools for GStreamer. Homepage: https://gstreamer.freedesktop.org Package: gstreamer1.0-x Status: hold ok installed Priority: optional Section: libs Installed-Size: 1445 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u1 Provides: gstreamer1.0-videosink Depends: libc6 (>= 2.17), libcairo2 (>= 1.2.4), libglib2.0-0 (>= 2.40), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.16.0), libx11-6, libxext6, libxv1 Description: GStreamer plugins for X11 and Pango GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the GStreamer plugins for X11 video output, both for standard Xlib support and for the Xv extension, as well as the plugin for Pango-based text rendering and overlay. Homepage: https://gstreamer.freedesktop.org Gstreamer-Elements: clockoverlay, textoverlay, textrender, timeoverlay, ximagesink, xvimagesink Gstreamer-Version: 1.14 Package: gtk-update-icon-cache Status: install ok installed Priority: optional Section: misc Installed-Size: 138 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: foreign Source: gtk+3.0 Version: 3.24.5-1 Replaces: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2) Depends: libc6 (>= 2.17), libgdk-pixbuf2.0-0 (>= 2.30.0), libglib2.0-0 (>= 2.55.2) Breaks: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2) Description: icon theme caching utility gtk-update-icon-cache creates mmap()able cache files for icon themes. . GTK+ can use the cache files created by gtk-update-icon-cache to avoid a lot of system call and disk seek overhead when the application starts. Since the format of the cache files allows them to be mmap()ed shared between multiple applications, the overall memory consumption is reduced as well. Homepage: https://www.gtk.org/ Package: gzip Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 235 Maintainer: Bdale Garbee Architecture: arm64 Version: 1.9-3+deb10u1 Depends: dpkg (>= 1.15.4) | install-info Pre-Depends: libc6 (>= 2.17) Suggests: less Description: GNU compression utilities This package provides the standard GNU file compression utilities, which are also the default compression tools for Debian. They typically operate on files with names ending in '.gz', but can also decompress files ending in '.Z' created with 'compress'. Homepage: https://www.gnu.org/software/gzip/ Package: hicolor-icon-theme Status: install ok installed Priority: optional Section: misc Installed-Size: 441 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Version: 0.17-2 Description: default fallback theme for FreeDesktop.org icon themes This is the default fallback theme used by implementations of the Freedesktop.org Icon Theme specification. Package: hostapd Status: install ok installed Priority: optional Section: net Installed-Size: 1974 Maintainer: Debian wpasupplicant Maintainers Architecture: arm64 Multi-Arch: foreign Source: wpa Version: 2:2.7+git20190128+0c1e29f-6+deb10u4 Depends: libc6 (>= 2.25), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libnl-route-3-200 (>= 3.2.7), libssl1.1 (>= 1.1.0), lsb-base Pre-Depends: init-system-helpers (>= 1.54~) Breaks: initscripts (<< 2.88dsf-13.3) Conffiles: /etc/default/hostapd 31a8b566754ab5414c75b7ab3d0ee1d0 /etc/hostapd/ifupdown.sh a4d051525d3c8cdecd2aeaae15ba2aa0 /etc/init.d/hostapd 6d5e58c4117fe4a97b04b5bc151f19d6 Description: IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator Originally, hostapd was an optional user space component for Host AP driver. It adds more features to the basic IEEE 802.11 management included in the kernel driver: using external RADIUS authentication server for MAC address based access control, IEEE 802.1X Authenticator and dynamic WEP keying, RADIUS accounting, WPA/WPA2 (IEEE 802.11i/RSN) Authenticator and dynamic TKIP/CCMP keying. . The current version includes support for other drivers, an integrated EAP authenticator (i.e., allow full authentication without requiring an external RADIUS authentication server), and RADIUS authentication server for EAP authentication. . hostapd works with the following drivers: . * mac80211 based drivers with support for master mode [linux] * Host AP driver for Prism2/2.5/3 [linux] * Driver interface for FreeBSD net80211 layer [kfreebsd] * Any wired Ethernet driver for wired IEEE 802.1X authentication. Homepage: http://w1.fi/wpa_supplicant/ Package: hostname Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 46 Maintainer: Michael Meskes Architecture: arm64 Version: 3.21 Replaces: nis (<< 3.17-30) Pre-Depends: libc6 (>= 2.17) Breaks: nis (<< 3.17-30) Description: utility to set/show the host name or domain name This package provides commands which can be used to display the system's DNS name, and to display or set its hostname or NIS domain name. Package: i2c-tools Status: install ok installed Priority: optional Section: utils Installed-Size: 275 Maintainer: Aurelien Jarno Architecture: arm64 Version: 4.1-1 Depends: libc6 (>= 2.17), libi2c0, perl:any, adduser, udev Recommends: read-edid Suggests: libi2c-dev, python-smbus Conflicts: lm-sensors (<< 1:3.0.0-1) Description: heterogeneous set of I2C tools for Linux This package contains a heterogeneous set of I2C tools for Linux: a bus probing tool, a chip dumper, register-level access helpers, EEPROM decoding scripts, and more. Homepage: https://www.kernel.org/pub/software/utils/i2c-tools/ Package: ifupdown Status: install ok installed Priority: important Section: admin Installed-Size: 216 Maintainer: Guus Sliepen Architecture: arm64 Multi-Arch: foreign Version: 0.8.35 Replaces: systemd (<< 228-3~) Depends: libc6 (>= 2.17), lsb-base, adduser, iproute2 Recommends: isc-dhcp-client | dhcp-client Suggests: ppp, rdnssd Breaks: systemd (<< 228-3~) Conffiles: /etc/default/networking 3f34a1868c2e6cd41caec70c8d1e5659 /etc/init.d/networking 11adb3f76369f48e5a8432f8bf8abfd7 Description: high level tools to configure network interfaces This package provides the tools ifup and ifdown which may be used to configure (or, respectively, deconfigure) network interfaces based on interface definitions in the file /etc/network/interfaces. Package: init-system-helpers Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 133 Maintainer: Debian systemd Maintainers Architecture: all Multi-Arch: foreign Version: 1.56+nmu1 Replaces: sysv-rc (<< 2.88dsf-59.3~), sysvinit-utils (<< 2.88dsf-59.3) Depends: perl-base (>= 5.20.1-3) Breaks: systemd (<< 228), sysvinit-utils (<< 2.88dsf-59.3~) Conflicts: file-rc (<< 0.8.17~), openrc (<= 0.18.3-1) Description: helper tools for all init systems This package contains helper tools that are necessary for switching between the various init systems that Debian contains (e. g. sysvinit or systemd). An example is deb-systemd-helper, a script that enables systemd unit files without depending on a running systemd. . It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which provide an abstraction for enabling, disabling, starting, and stopping services for all supported Debian init systems as specified by the policy. . While this package is maintained by pkg-systemd-maintainers, it is NOT specific to systemd at all. Maintainers of other init systems are welcome to include their helpers in this package. Package: initramfs-tools Status: install ok installed Priority: optional Section: utils Installed-Size: 111 Maintainer: Debian kernel team Architecture: all Multi-Arch: foreign Version: 0.133+deb10u1 Provides: linux-initramfs-tool Depends: initramfs-tools-core (= 0.133+deb10u1), linux-base Suggests: bash-completion Breaks: e2fsprogs (<< 1.42.13), initscripts (<< 2.88dsf-59.3~), upstart Conflicts: linux-initramfs-tool, usplash (<< 0.5.50) Conffiles: /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297 /etc/kernel/postinst.d/initramfs-tools 0d9cc4eb58a5e2726911ca55d7719635 /etc/kernel/postrm.d/initramfs-tools f414d7d4a1210624ff6ef6ed96ca7061 Description: generic modular initramfs generator (automation) This package builds a bootable initramfs for Linux kernel packages. The initramfs is loaded along with the kernel and is responsible for mounting the root filesystem and starting the main init system. Package: initramfs-tools-core Status: install ok installed Priority: optional Section: utils Installed-Size: 208 Maintainer: Debian kernel team Architecture: all Multi-Arch: foreign Source: initramfs-tools Version: 0.133+deb10u1 Replaces: initramfs-tools (<< 0.121~) Depends: klibc-utils (>= 2.0.4-8~), cpio (>= 2.12), kmod, udev, coreutils (>= 8.24), e2fsprogs Recommends: busybox (>= 1:1.22.0-17~) | busybox-static (>= 1:1.22.0-17~), pigz Suggests: bash-completion Breaks: busybox (<< 1:1.22.0-17~), busybox-static (<< 1:1.22.0-17~), initramfs-tools (<< 0.121~) Conffiles: /etc/initramfs-tools/initramfs.conf 979aaf1f18ea2de9bce7c063866b8d96 Description: generic modular initramfs generator (core tools) This package contains the mkinitramfs program that can be used to create a bootable initramfs for a Linux kernel. The initramfs should be loaded along with the kernel and is then responsible for mounting the root filesystem and starting the main init system. Package: initscripts Status: install ok installed Priority: optional Section: admin Installed-Size: 213 Maintainer: Debian sysvinit maintainers Architecture: arm64 Multi-Arch: foreign Source: sysvinit Version: 2.93-8 Depends: coreutils (>= 5.93), debianutils (>= 4), lsb-base (>= 3.2-14), sysv-rc | file-rc | openrc, sysvinit-utils (>= 2.88dsf-59.5), mount Recommends: e2fsprogs, psmisc Breaks: hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), util-linux (<< 2.26.2-4~) Conffiles: /etc/init.d/bootlogs 41ad826ad3091964c994b03177bbc29b /etc/init.d/brightness 9f62f0ba0682a1f2de32e5361fc6104c /etc/init.d/bootmisc.sh b9792c4cc09602d8bbadd554d069b002 /etc/init.d/checkfs.sh 40a349c805a9090a9a4d34187ed614c1 /etc/init.d/checkroot.sh c93bf1d353c826d1714afbe913f60835 /etc/init.d/checkroot-bootclean.sh 955dcf4da7378f9f981d3f04c94d36d7 /etc/init.d/halt a0e668699f774d928ddc62954155adb5 /etc/init.d/hostname.sh 0b7ae7cdd81c3b4e8cc6e3f1168bd1c5 /etc/init.d/killprocs 9866a64a5d3d34552b0c36f5667cdacd /etc/init.d/mountall.sh 0850a5381c8d8c356df53a2b64c69388 /etc/init.d/mountall-bootclean.sh 4c6b07a64798d8d78783e271238511f4 /etc/init.d/mountnfs.sh 1902fe6faf9000cf38ac31ded059168d /etc/init.d/mountnfs-bootclean.sh 68aeda71fd9ae6861c3859c4ac33ee62 /etc/init.d/mountdevsubfs.sh c18f4495f67dec33e257946215f54508 /etc/init.d/mountkernfs.sh 12a99beb128e18bb6b277882233545af /etc/init.d/rc.local 7d505630f083ddc543cb68fbeb83a6b5 /etc/init.d/reboot 39ce57bc053ad1bf9861347927d7db6b /etc/init.d/rmnologin 7a78fdb0133b7f7cff0ca2a2ac0a3059 /etc/init.d/sendsigs 617e0ce4756cd2ac0c53634c4667fe22 /etc/init.d/single 57f5376fb4d45eb96c01226234f934a8 /etc/init.d/umountfs e67a4a94d89835ec1c3cec5d6709887a /etc/init.d/umountnfs.sh b1bf2947b1848f069a53e06f9f199b79 /etc/init.d/umountroot 161f12bc211fd4e87030db54b97c13b2 /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a /etc/default/rcS d52728f09e0a0e36f3be356559d0473c /etc/default/tmpfs 7287952acefcfb937d077579dd857c41 /etc/network/if-up.d/mountnfs e6669032a28a89eba14096525a14f633 Description: scripts for initializing and shutting down the system The scripts in this package initialize a standard Debian system at boot time and shut it down at halt or reboot time. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: input-utils Status: install ok installed Priority: optional Section: utils Installed-Size: 61 Maintainer: Marcus Better Architecture: arm64 Source: input-utils (1.0-1.1) Version: 1.0-1.1+b1 Depends: libc6 (>= 2.17) Description: utilities for the input layer of the Linux kernel This is a collection of utilities which are useful when working with the input layer of the Linux kernel (version 2.6 and later). Included are utilities to list the input devices known to the kernel, show the input events that are received by a device, and query or modify keyboard maps. Package: insserv Status: install ok installed Priority: optional Section: misc Installed-Size: 140 Maintainer: Debian sysvinit maintainers Architecture: arm64 Version: 1.18.0-2 Depends: libc6 (>= 2.17) Suggests: bootchart2 Breaks: sysv-rc (<< 2.87dsf-3) Conffiles: /etc/insserv.conf b15785c0c4b022a3ba0edb78ba71297c Description: boot sequence organizer using LSB init.d script dependency information The insserv program is used by the standard SysV-based init system. It updates the order of symlinks in /etc/rc?.d/ based on dependencies specified by LSB headers in the init.d scripts themselves. . These declared relations between scripts make it possible to optimize the boot sequence for the currently installed set of packages, while detecting and rejecting dependency loops. . Using insserv incorrectly can result in an unbootable system. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: iotop Status: install ok installed Priority: optional Section: admin Installed-Size: 100 Maintainer: Paul Wise Architecture: arm64 Version: 0.6-24-g733f3f8-1 Depends: python3:any (>= 3.3.2-2~) Description: simple top-like I/O monitor iotop does for I/O usage what top(1) does for CPU usage. It watches I/O usage information output by the Linux kernel and displays a table of current I/O usage by processes on the system. It is handy for answering the question "Why is the disk churning so much?". . iotop can only run under a Linux 2.6.20 or later kernel built with the CONFIG_TASKSTATS, CONFIG_TASK_DELAY_ACCT, CONFIG_TASK_IO_ACCOUNTING and CONFIG_VM_EVENT_COUNTERS build config options on. Homepage: http://guichaz.free.fr/iotop/ Package: iperf Status: install ok installed Priority: optional Section: net Installed-Size: 185 Maintainer: Roberto Lumbreras Architecture: arm64 Version: 2.0.12+dfsg1-2 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5) Description: Internet Protocol bandwidth measuring tool Iperf is a modern alternative for measuring TCP and UDP bandwidth performance, allowing the tuning of various parameters and characteristics. . Features: * Measure bandwidth, packet loss, delay jitter * Report MSS/MTU size and observed read sizes. * Support for TCP window size via socket buffers. * Multi-threaded. Client and server can have multiple simultaneous connections. * Client can create UDP streams of specified bandwidth. * Multicast and IPv6 capable. * Options can be specified with K (kilo-) and M (mega-) suffices. * Can run for specified time, rather than a set amount of data to transfer. * Picks the best units for the size of data being reported. * Server handles multiple connections. * Print periodic, intermediate bandwidth, jitter, and loss reports at specified intervals. * Server can be run as a daemon. * Use representative streams to test out how link layer compression affects your achievable bandwidth. Homepage: https://sourceforge.net/projects/iperf2/ Package: iproute2 Status: install ok installed Priority: important Section: net Installed-Size: 2557 Maintainer: Alexander Wirt Architecture: arm64 Multi-Arch: foreign Version: 4.20.0-2+deb10u1 Replaces: iproute Provides: arpd Depends: debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.27), libcap2 (>= 1:2.10), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 2.0.15), libxtables12 (>= 1.6.0+snapshot20161117), libcap2-bin Recommends: libatm1 (>= 2.4.1-17~) Suggests: iproute2-doc Conflicts: arpd, iproute (<< 20130000-1) Conffiles: /etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb /etc/iproute2/ematch_map 0e0f36cafc6a9cf76bc704cfd8f96ece /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f /etc/iproute2/nl_protos 393e42fa549d0974eb66d576675779c2 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f /etc/iproute2/rt_protos 7b2dc3e981ec34331766ba9d219670aa /etc/iproute2/rt_protos.d/README 88e45597012c565f9a10ffef1bc14312 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463 /etc/iproute2/rt_tables.d/README 18bfdabbd4d5b14eae350720ea5ff431 Description: networking and traffic control tools The iproute2 suite is a collection of utilities for networking and traffic control. . These tools communicate with the Linux kernel via the (rt)netlink interface, providing advanced features not available through the legacy net-tools commands 'ifconfig' and 'route'. Homepage: https://wiki.linuxfoundation.org/networking/iproute2 Package: iptables Status: install ok installed Priority: important Section: net Installed-Size: 2042 Maintainer: Debian Netfilter Packaging Team Architecture: arm64 Multi-Arch: foreign Version: 1.8.2-4 Replaces: iptables-nftables-compat (<< 1.6.2~) Depends: libip4tc0 (= 1.8.2-4), libip6tc0 (= 1.8.2-4), libiptc0 (= 1.8.2-4), libxtables12 (= 1.8.2-4), libc6 (>= 2.28), libmnl0 (>= 1.0.3-4~), libnetfilter-conntrack3, libnfnetlink0, libnftnl11 (>= 1.1.2) Recommends: nftables Suggests: kmod Breaks: iptables-nftables-compat (<< 1.6.2~) Description: administration tools for packet filtering and NAT The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . iptables is the userspace command line program used to configure the Linux packet filtering and NAT ruleset. It is targeted towards systems and networks administrators. . This package contains several different utilities, the most important ones: . iptables, iptables-save, iptables-restore (nft-based version) . iptables, iptables-save, iptables-restore (legacy version) . ip6tables, ip6tables-save, ip6tables-restore (nft-based version) . ip6tables, ip6tables-save, ip6tables-restore (legacy version) . arptables, arptables-save, arptables-restore (nft-based version) . ebtables, ebtables-save, ebtables-restore (nft-based version) Homepage: http://www.netfilter.org/ Package: iputils-ping Status: install ok installed Priority: important Section: net Installed-Size: 100 Maintainer: Noah Meyerhans Architecture: arm64 Source: iputils Version: 3:20180629-2+deb10u2 Provides: ping Depends: libc6 (>= 2.17), libcap2 (>= 1:2.10), libidn2-0 (>= 0.6), libnettle6 Recommends: libcap2-bin Description: Tools to test the reachability of network hosts The ping command sends ICMP ECHO_REQUEST packets to a host in order to test if the host is reachable via the network. . This package includes a ping6 utility which supports IPv6 network connections. Package: ir-keytable Status: install ok installed Priority: optional Section: utils Installed-Size: 401 Maintainer: Gregor Jasny Architecture: arm64 Source: v4l-utils Version: 1.16.3-3 Depends: libc6 (>= 2.17), libelf1 (>= 0.131) Recommends: udev Conffiles: /etc/rc_maps.cfg 2c1ea8d47241539aade1d3e987308b39 Description: Alter keymaps of Remote Controller devices This package allows one to change the keymap of controller receivers. Those receivers are found as infrared receivers on DVB sticks or on framegrabber cards. Via ir-keytable the mapping from a scancode to the generated event can be customized and made persistent. Homepage: https://linuxtv.org/downloads/v4l-utils/ Package: isc-dhcp-client Status: install ok installed Priority: important Section: net Installed-Size: 682 Maintainer: Debian ISC DHCP Maintainers Architecture: arm64 Source: isc-dhcp Version: 4.4.1-2+deb10u3 Provides: dhcp-client Depends: libc6 (>= 2.17), libdns-export1104, libisc-export1100, debianutils (>= 2.8.2), iproute2 Recommends: isc-dhcp-common Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns Conffiles: /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5 /etc/dhcp/dhclient.conf 649563ef7a61912664a400a5263958a6 Description: DHCP client for automatically obtaining an IP address This is the Internet Software Consortium's DHCP client. . Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP (actually dhcpd includes much of the functionality of bootpd). It gives client machines "leases" for IP addresses and can automatically set their network configuration. If your machine depends on DHCP (especially likely if it's a workstation on a large network, or a laptop, or attached to a cable modem), keep this or another DHCP client installed. . Extra documentation can be found in the package isc-dhcp-common. Homepage: http://www.isc.org Package: iso-codes Status: install ok installed Priority: optional Section: misc Installed-Size: 19418 Maintainer: Dr. Tobias Quathamer Architecture: all Multi-Arch: foreign Version: 4.2-1 Suggests: isoquery Description: ISO language, territory, currency, script codes and their translations This package provides the ISO 639, ISO 639-3, and ISO 639-5 language code lists, the ISO 4217 currency code list, the ISO 3166 territory code list, the ISO 3166-2 sub-territory list, and the ISO 15924 script code list as JSON files. . More importantly, it also provides their translations to be used by other programs. Homepage: https://salsa.debian.org/iso-codes-team/iso-codes Package: iw Status: install ok installed Priority: optional Section: net Installed-Size: 253 Maintainer: Paride Legovini Architecture: arm64 Multi-Arch: foreign Version: 5.0.1-1 Replaces: aircrack-ng (<< 1:1.0~rc2-1) Depends: libc6 (>= 2.17), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7) Recommends: crda Breaks: aircrack-ng (<< 1:1.0~rc2-1) Description: tool for configuring Linux wireless devices This package contains the `iw' tool which allows you to configure and show information about wireless networking. . In the future iw will become the canonical command line tool for wireless configuration and iwconfig/wireless-tools will no longer be required. See /usr/share/doc/iw/README.Debian for a more detailed overview of iw. Homepage: https://wireless.kernel.org/en/users/Documentation/iw Package: kbd Status: install ok installed Priority: optional Section: utils Installed-Size: 1622 Maintainer: Console utilities maintainers Architecture: arm64 Version: 2.0.4-4 Provides: console-utilities Depends: libc6 (>= 2.17) Recommends: console-setup | console-data Conflicts: console-utilities Description: Linux console font and keytable utilities This package allows you to set up the Linux console, change the font, resize text mode virtual consoles and remap the keyboard. . You will probably want to install a set of data files, such as the one in the “console-data” package. Homepage: http://www.kbd-project.org/ Package: keyboard-configuration Status: install ok installed Priority: optional Section: utils Installed-Size: 2574 Maintainer: Debian Install System Team Architecture: all Multi-Arch: foreign Source: console-setup Version: 1.193~deb10u1 Replaces: console-setup (<< 1.47), console-setup-mini (<< 1.47) Depends: liblocale-gettext-perl Pre-Depends: debconf (>= 1.5.34) Breaks: console-setup (<< 1.71), console-setup-mini (<< 1.47) Description: system-wide keyboard preferences This package maintains the keyboard preferences in /etc/default/keyboard. Other packages can use the information provided by this package in order to configure the keyboard on the console or in X Window. Package: klibc-utils Status: install ok installed Priority: optional Section: libs Installed-Size: 403 Maintainer: maximilian attems Architecture: arm64 Multi-Arch: foreign Source: klibc Version: 2.0.6-1+deb10u1 Depends: libklibc (= 2.0.6-1+deb10u1) Breaks: initramfs-tools (<< 0.123~) Description: small utilities built with klibc for early boot This package contains a collection of programs that are linked against klibc. These duplicate some of the functionality of a regular Linux toolset, but are typically much smaller than their full-function counterparts. They are intended for inclusion in initramfs images and embedded systems. Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git Package: kmod Status: install ok installed Priority: important Section: admin Installed-Size: 229 Maintainer: Marco d'Itri Architecture: arm64 Multi-Arch: foreign Version: 26-1 Depends: libc6 (>= 2.17), liblzma5 (>= 5.1.1alpha+20120614), libssl1.1 (>= 1.1.0), libkmod2 (= 26-1), lsb-base Breaks: alsa-base (<= 1.0.25+3), oss-compat (= 4) Conffiles: /etc/init.d/kmod 82698019c962069b438bd2a82d9fa1e7 Description: tools for managing Linux kernel modules This package contains a set of programs for loading, inserting, and removing kernel modules for Linux. It replaces module-init-tools. Package: laptop-detect Status: install ok installed Priority: optional Section: utils Installed-Size: 20 Maintainer: Simó Albert i Beltran Architecture: all Version: 0.16 Recommends: dmidecode Description: system chassis type checker This package provides a simple shell script which attempts to determine whether it is being run on a laptop (or similar portable machine). It is mainly useful for installers. Homepage: https://gitlab.com/debiants/laptop-detect Package: less Status: install ok installed Priority: important Section: text Installed-Size: 283 Maintainer: Anibal Monsalve Salazar Architecture: arm64 Multi-Arch: foreign Version: 487-0.1+deb10u1 Depends: libc6 (>= 2.17), libtinfo6 (>= 6), debianutils (>= 1.8) Description: pager program similar to more This package provides "less", a file pager (that is, a memory-efficient utility for displaying text one screenful at a time). Less has many more features than the basic pager "more". As part of the GNU project, it is widely regarded as the standard pager on UNIX-derived systems. . Also provided are "lessecho", a simple utility for ensuring arguments with spaces are correctly quoted; "lesskey", a tool for modifying the standard (vi-like) keybindings; and "lesspipe", a filter for specific types of input, such as .doc or .txt.gz files. Homepage: http://www.greenwoodsoftware.com/less/ Package: libaa1 Status: install ok installed Priority: optional Section: libs Installed-Size: 148 Maintainer: Jonathan Carter Architecture: arm64 Multi-Arch: same Source: aalib Version: 1.4p5-46 Replaces: aalib1 Provides: aalib1 Depends: libc6 (>= 2.17), libgpm2 (>= 1.20.7), libncurses6 (>= 6), libslang2 (>= 2.2.4), libtinfo6 (>= 6), libx11-6 Description: ASCII art library AAlib is a portable ASCII art graphics library. Internally, it works like a graphics display, but the output is rendered into gorgeous platform independent ASCII graphics. Homepage: http://aa-project.sourceforge.net/aalib/ Package: libacl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 65 Maintainer: Guillem Jover Architecture: arm64 Multi-Arch: same Source: acl Version: 2.2.53-4 Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17) Description: access control list - shared library This package contains the shared library containing the POSIX 1003.1e draft standard 17 functions for manipulating access control lists. Homepage: https://savannah.nongnu.org/projects/acl/ Package: libao-common Status: install ok installed Priority: optional Section: libs Installed-Size: 27 Maintainer: Ron Lee Architecture: all Multi-Arch: foreign Source: libao Version: 1.2.2+20180113-1 Replaces: libao4 (<< 1.0.0-2) Breaks: libao4 (<< 1.0.0-2) Conflicts: libao2 Conffiles: /etc/libao.conf 6612b678709099664f611266a780ff8a Description: Cross Platform Audio Output Library (Common files) Libao is a cross-platform audio library that allows programs to output audio using a simple API on a wide variety of platforms. It currently supports: . * Null output (handy for testing without a sound device) * WAV files * AU files * OSS (Open Sound System, used on Linux and FreeBSD) * ALSA (Advanced Linux Sound Architecture) * PulseAudio (next generation GNOME sound server) * and several others. . This package contains config files and man pages for libao. Homepage: http://www.xiph.org/ao/ Package: libao4 Status: install ok installed Priority: optional Section: libs Installed-Size: 138 Maintainer: Ron Lee Architecture: arm64 Multi-Arch: same Source: libao Version: 1.2.2+20180113-1 Replaces: libao-pulse Depends: libc6 (>= 2.17), libao-common Suggests: libasound2, libaudio2, libpulse0, libsndio6.1 Description: Cross Platform Audio Output Library Libao is a cross-platform audio library that allows programs to output audio using a simple API on a wide variety of platforms. It currently supports: . * Null output (handy for testing without a sound device) * WAV files * AU files * OSS (Open Sound System, used on Linux and FreeBSD) * ALSA (Advanced Linux Sound Architecture) * PulseAudio (next generation GNOME sound server) * and several others. Homepage: http://www.xiph.org/ao/ Package: libaom0 Status: install ok installed Priority: optional Section: libs Installed-Size: 2403 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: aom Version: 1.0.0-3+deb10u1 Depends: libc6 (>= 2.17) Description: AV1 Video Codec Library AOMedia Video 1 (AV1) is an open and royalty free video encoding format optimized for the Internet and the successor of VP9. aom is the reference encoder and decoder implementation published by the Alliance for Open Media. . This package contains the shared library. Homepage: https://aomedia.org/ Package: libapparmor1 Status: install ok installed Priority: optional Section: libs Installed-Size: 160 Maintainer: Debian AppArmor Team Architecture: arm64 Multi-Arch: same Source: apparmor Version: 2.13.2-10 Depends: libc6 (>= 2.17) Description: changehat AppArmor library libapparmor1 provides the shared library used for making use of the AppArmor profile and changehat functionality, as well as common log parsing routines. Homepage: http://apparmor.net/ Package: libappindicator3-1 Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 102 Maintainer: Debian QA Group Architecture: arm64 Multi-Arch: same Source: libappindicator Version: 0.4.92-7 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libdbusmenu-glib4 (>= 0.4.2), libdbusmenu-gtk3-4 (>= 0.4.2), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.0.0), libindicator3-7, libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0) Description: allow applications to export a menu into the panel -- GTK3 version A library to allow applications to export a menu into the panel. Based on KSNI it also works in KDE and will fallback to generic Systray support if none of those are available. . This package contains shared libraries to be used by GTK3 applications. Homepage: https://launchpad.net/libappindicator Package: libapt-inst2.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 476 Maintainer: APT Development Team Architecture: arm64 Multi-Arch: same Source: apt Version: 1.8.2.3 Provides: libapt-inst (= 1.8.2.3) Depends: libapt-pkg5.0 (>= 1.1~exp9), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Description: deb package format runtime library This library provides methods to query and extract information from deb packages. This includes the control data and the package file content. Package: libapt-pkg5.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 3098 Maintainer: APT Development Team Architecture: arm64 Multi-Arch: same Source: apt Version: 1.8.2.3 Provides: libapt-pkg (= 1.8.2.3) Depends: libbz2-1.0, libc6 (>= 2.27), libgcc1 (>= 1:3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 5.2), libsystemd0 (>= 221), libudev1 (>= 183), libzstd1 (>= 1.3.2), zlib1g (>= 1:1.2.2.3) Recommends: apt (>= 1.8.2.3) Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), libapt-inst1.5 (<< 0.9.9~) Description: package management runtime library This library provides the common functionality for searching and managing packages as well as information about packages. Higher-level package managers can depend upon this library. . This includes: * retrieval of information about packages from multiple sources * retrieval of packages and all dependent packages needed to satisfy a request either through an internal solver or by interfacing with an external one * authenticating the sources and validating the retrieved data * installation and removal of packages in the system * providing different transports to retrieve data over cdrom, ftp, http(s), rsh as well as an interface to add more transports like tor+http(s) (apt-transport-tor). Package: libargon2-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Luca Bruno Architecture: arm64 Multi-Arch: same Source: argon2 Version: 0~20171227-0.2 Depends: libc6 (>= 2.17) Description: memory-hard hashing function - runtime library Argon2 is a password-hashing function that can be used to hash passwords for credential storage, key derivation, or other applications. . There are two main versions of Argon2: Argon2i and Argon2d. Argon2i is the safest against side-channel attacks, while Argon2d provides the highest resistance against GPU cracking attacks. . Argon2i and Argon2d are parametrized by: * A time cost, which defines the amount of computation realized and therefore the execution time, given in number of iterations * A memory cost, which defines the memory usage, given in kibibytes * A parallelism degree, which defines the number of parallel threads . This package includes the dynamic library against which programs are linked. Homepage: https://github.com/P-H-C/phc-winner-argon2 Package: libasound2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1139 Maintainer: Debian ALSA Maintainers Architecture: arm64 Multi-Arch: same Source: alsa-lib Version: 1.1.8-1 Depends: libasound2-data (>= 1.1.8-1), libc6 (>= 2.17) Suggests: libasound2-plugins (>= 1.0.24) Breaks: bluez-alsa (<= 4.94-2), libasound2-plugin-equal (<= 0.6-1), libasound2-plugins (<< 1.0.24) Description: shared library for ALSA applications This package contains the ALSA library and its standard plugins, as well as the required configuration files. . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Package: libasound2-data Status: install ok installed Priority: optional Section: libs Installed-Size: 646 Maintainer: Debian ALSA Maintainers Architecture: all Multi-Arch: foreign Source: alsa-lib Version: 1.1.8-1 Replaces: libasound2 (<< 1.1.8-1) Suggests: alsa-utils Breaks: libasound2 (<< 1.1.8-1) Description: Configuration files and profiles for ALSA drivers This package contains configuration files for ALSA drivers and UCM profiles for use with alsaucm. . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Package: libasound2-plugins Status: install ok installed Priority: optional Section: libs Installed-Size: 311 Maintainer: Debian ALSA Maintainers Architecture: arm64 Multi-Arch: same Source: alsa-plugins Version: 1.1.8-1 Depends: libasound2 (>= 1.1.7), libavcodec58 (>= 7:4.0), libavresample4 (>= 7:4.0), libavutil56 (>= 7:4.0), libc6 (>= 2.17), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libpulse0 (>= 0.99.1), libsamplerate0 (>= 0.1.7) Conffiles: /etc/alsa/conf.d/99-pulseaudio-default.conf.example b7fd8068d12e5e23b65da5dd6b1c76a1 Description: ALSA library additional plugins This package contains plugins for the ALSA library that are not included in the main libasound2 package. . The following plugins are included, among other: - a52: S16 to A52 stream converter - jack: play or capture via JACK - oss: run native ALSA apps on OSS drivers - pulse: play or capture via Pulse Audio - lavcrate, samplerate and speexrate: rate converters - upmix and vdownmix: convert from/to 2 and 4/6 channel streams . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Package: libaspell15 Status: install ok installed Priority: optional Section: libs Installed-Size: 2091 Maintainer: Agustin Martin Domingo Architecture: arm64 Multi-Arch: same Source: aspell Version: 0.60.7~20110707-6+deb10u1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5) Recommends: aspell-en | aspell-dictionary | aspell6a-dictionary Suggests: aspell Breaks: aspell-bin (<< 0.60.3-2), aspell-da (<= 1.6.25-1.1), aspell-no (<= 2.0.10-5.1) Conflicts: aspell6-dictionary Description: GNU Aspell spell-checker runtime library These are the runtime parts of the Aspell and pspell spell-checking toolkits, needed by applications that use the toolkits at runtime. . For a standalone spell-checker, install aspell as well. Homepage: http://aspell.net/ Package: libass9 Status: install ok installed Priority: optional Section: libs Installed-Size: 173 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libass Version: 1:0.14.0-2 Depends: libc6 (>= 2.17), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.3.5), libfribidi0 (>= 0.19.2), libharfbuzz0b (>= 0.9.9) Description: library for SSA/ASS subtitles rendering SubStation Alpha (SSA) is a subtitle file format that allows more advanced subtitles than the conventional SRT and similar formats. . This package contains the shared library for libass. Homepage: https://github.com/libass/libass Package: libassuan0 Status: install ok installed Priority: optional Section: libs Installed-Size: 113 Maintainer: Debian GnuPG-Maintainers Architecture: arm64 Multi-Arch: same Source: libassuan Version: 2.5.2-1 Depends: libc6 (>= 2.17), libgpg-error0 (>= 1.17) Description: IPC library for the GnuPG components Libassuan is a small library implementing the so-called "Assuan protocol". This protocol is used for IPC between most newer GnuPG components. Both server and client side functions are provided. Homepage: https://www.gnupg.org/related_software/libassuan/index.html Package: libasyncns0 Status: install ok installed Priority: optional Section: libs Installed-Size: 39 Maintainer: Tanguy Ortolo Architecture: arm64 Multi-Arch: same Source: libasyncns Version: 0.8-6 Depends: libc6 (>= 2.17) Description: Asynchronous name service query library libasyncns is a C library for Linux/Unix for executing name service queries asynchronously. It is an asynchronous wrapper around getaddrinfo(3), getnameinfo(3), res_query(3) and res_search(3) from libc and libresolv. Homepage: http://0pointer.de/lennart/projects/libasyncns/ Package: libatk-bridge2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 228 Maintainer: Debian Accessibility Team Architecture: arm64 Multi-Arch: same Source: at-spi2-atk Version: 2.30.0-5 Depends: libatk1.0-0 (>= 2.30.0), libatspi2.0-0 (>= 2.9.90), libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.41.1) Description: AT-SPI 2 toolkit bridge - shared library This package contains the ATK bridge shared library. Homepage: https://wiki.gnome.org/Accessibility Package: libatk1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 195 Maintainer: Debian Accessibility Team Architecture: arm64 Multi-Arch: same Source: atk1.0 Version: 2.30.0-2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.55.2), libatk1.0-data (>= 2.30.0-2) Description: ATK accessibility toolkit ATK is a toolkit providing accessibility interfaces for applications or other toolkits. By implementing these interfaces, those other toolkits or applications can be used with tools such as screen readers, magnifiers, and other alternative input devices. . This is the runtime part of ATK, needed to run applications built with it. Homepage: https://wiki.gnome.org/Accessibility Package: libatk1.0-data Status: install ok installed Priority: optional Section: misc Installed-Size: 1215 Maintainer: Debian Accessibility Team Architecture: all Multi-Arch: foreign Source: atk1.0 Version: 2.30.0-2 Description: Common files for the ATK accessibility toolkit ATK is a toolkit providing accessibility interfaces for applications or other toolkits. By implementing these interfaces, those other toolkits or applications can be used with tools such as screen readers, magnifiers, and other alternative input devices. . This contains the common files which the runtime libraries need. Homepage: https://wiki.gnome.org/Accessibility Package: libatkmm-1.6-1v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 344 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: atkmm1.6 Version: 2.28.0-2 Replaces: libatkmm-1.6-1 Depends: libatk1.0-0 (>= 2.12.0), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.54.0), libsigc++-2.0-0v5 (>= 2.2.0), libstdc++6 (>= 5) Conflicts: libatkmm-1.6-1 Description: C++ wrappers for ATK accessibility toolkit (shared libraries) Atkmm is a C++ interface for ATK, accessibility toolkit used by Gtk+ library. It provides a familiar interface for C++ programmers to add accessibility features to their applications. . This package contains shared libraries. Homepage: http://www.gtkmm.org/ Package: libatomic1 Status: install ok installed Priority: optional Section: libs Installed-Size: 44 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: same Source: gcc-8 Version: 8.3.0-6 Depends: gcc-8-base (= 8.3.0-6), libc6 (>= 2.17) Description: support library providing __atomic built-in functions library providing __atomic built-in functions. When an atomic call cannot be turned into lock-free instructions, GCC will make calls into this library. Homepage: http://gcc.gnu.org/ Package: libatspi2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 226 Maintainer: Debian Accessibility Team Architecture: arm64 Multi-Arch: same Source: at-spi2-core Version: 2.30.0-7 Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.37.3), libx11-6 Recommends: at-spi2-core (= 2.30.0-7) Description: Assistive Technology Service Provider Interface - shared library This package contains the shared library for applications that wish to use the at-spi interface. Homepage: https://wiki.gnome.org/Accessibility Package: libattr1 Status: install ok installed Priority: optional Section: libs Installed-Size: 51 Maintainer: Guillem Jover Architecture: arm64 Multi-Arch: same Source: attr Version: 1:2.4.48-4 Depends: libc6 (>= 2.17) Conffiles: /etc/xattr.conf d1e7e7add29e247fdcf2a098fe5b37a0 Description: extended attribute handling - shared library Contains the runtime environment required by programs that make use of extended attributes. Homepage: https://savannah.nongnu.org/projects/attr/ Package: libaudit-common Status: install ok installed Priority: optional Section: libs Installed-Size: 33 Maintainer: Laurent Bigonville Architecture: all Multi-Arch: foreign Source: audit Version: 1:2.8.4-3 Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2) Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2) Conffiles: /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2 Description: Dynamic library for security auditing - common files The audit-libs package contains the dynamic libraries needed for applications to use the audit framework. It is used to monitor systems for security related events. . This package contains the libaudit.conf configuration file and the associated manpage. Homepage: https://people.redhat.com/sgrubb/audit/ Package: libaudit1 Status: install ok installed Priority: optional Section: libs Installed-Size: 157 Maintainer: Laurent Bigonville Architecture: arm64 Multi-Arch: same Source: audit Version: 1:2.8.4-3 Depends: libaudit-common (>= 1:2.8.4-3), libc6 (>= 2.17), libcap-ng0 (>= 0.7.9) Description: Dynamic library for security auditing The audit-libs package contains the dynamic libraries needed for applications to use the audit framework. It is used to monitor systems for security related events. Homepage: https://people.redhat.com/sgrubb/audit/ Package: libavahi-client3 Status: install ok installed Priority: optional Section: libs Installed-Size: 121 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: avahi Version: 0.7-4+deb10u3 Depends: libavahi-common3 (>= 0.6.22), libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14) Description: Avahi client library Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains the library for Avahi's C API which allows you to integrate mDNS/DNS-SD functionality into your application. Homepage: http://avahi.org/ Package: libavahi-common-data Status: install ok installed Priority: optional Section: libs Installed-Size: 770 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: avahi Version: 0.7-4+deb10u3 Description: Avahi common data files Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains common data files for avahi. Homepage: http://avahi.org/ Package: libavahi-common3 Status: install ok installed Priority: optional Section: libs Installed-Size: 107 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: avahi Version: 0.7-4+deb10u3 Depends: libc6 (>= 2.17), libavahi-common-data Description: Avahi common library Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains the Avahi common library, which is a set of common functions used by many of Avahis components and client applications. Homepage: http://avahi.org/ Package: libavc1394-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 57 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libavc1394 Version: 0.5.4-5 Depends: libc6 (>= 2.17), libraw1394-11 Description: control IEEE 1394 audio/video devices libavc1394 is a programming interface for the 1394 Trade Association AV/C (Audio/Video Control) Digital Interface Command Set. It allows you to remote control camcorders and similar devices connected to your computer via an IEEE 1394 (aka Firewire) link. . This package includes the libraries needed to run executables using libavc1394. Homepage: http://sourceforge.net/projects/libavc1394/ Package: libavcodec58 Status: install ok installed Priority: optional Section: libs Installed-Size: 11458 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: ffmpeg Version: 7:4.1.11-0+deb10u1 Depends: libaom0 (>= 1.0.0), libavutil56 (= 7:4.1.11-0+deb10u1), libc6 (>= 2.27), libcairo2 (>= 1.2.4), libcodec2-0.8.1, libglib2.0-0 (>= 2.12.0), libgsm1 (>= 1.0.18), liblzma5 (>= 5.1.1alpha+20120614), libmp3lame0 (>= 3.100), libopenjp2-7 (>= 2.0.0), libopus0 (>= 1.1), librsvg2-2 (>= 2.14.4), libshine3 (>= 3.1.0), libsnappy1v5, libspeex1 (>= 1.2~beta3-1), libswresample3 (= 7:4.1.11-0+deb10u1), libtheora0 (>= 1.0), libtwolame0 (>= 0.3.10), libva2 (>= 2.2.0), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpx5 (>= 1.6.0), libwavpack1 (>= 4.40.0), libwebp6 (>= 0.5.1), libwebpmux3 (>= 0.6.1-2+deb10u2), libx264-155, libx265-165 (>= 2.9), libxvidcore4 (>= 1.2.2), libzvbi0 (>= 0.2.35), zlib1g (>= 1:1.2.0) Description: FFmpeg library with de/encoders for audio/video codecs - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library provides a generic encoding/decoding framework and contains multiple decoders and encoders for audio, video and subtitle streams, and several bitstream filters. . The shared architecture provides various services ranging from bit stream I/O to DSP optimizations, and makes it suitable for implementing robust and fast codecs as well as for experimentation. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libavresample4 Status: install ok installed Priority: optional Section: libs Installed-Size: 204 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: ffmpeg Version: 7:4.1.11-0+deb10u1 Depends: libavutil56 (= 7:4.1.11-0+deb10u1), libc6 (>= 2.17) Description: FFmpeg compatibility library for resampling - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library is provided for compatibility reasons only. The FFmpeg project advises to use libswresample instead. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libavutil56 Status: install ok installed Priority: optional Section: libs Installed-Size: 567 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: ffmpeg Version: 7:4.1.11-0+deb10u1 Depends: libc6 (>= 2.28), libdrm2 (>= 2.3.1), libva-drm2 (>= 1.3), libva-x11-2 (>= 1.3), libva2 (>= 2.1.0), libvdpau1 (>= 0.2), libx11-6 Description: FFmpeg library with functions for simplifying programming - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library is a utility library to aid portable multimedia programming. It contains safe portable string functions, random number generators, data structures, additional mathematics functions, cryptography and multimedia related functionality (like enumerations for pixel and sample formats). It is not a library for code needed by both libavcodec and libavformat. The goal for this library is to be modular, small, efficient and useful. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libblkid1 Status: install ok installed Priority: optional Section: libs Installed-Size: 428 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: same Source: util-linux Version: 2.33.1-0.1+deb10u1 Depends: libc6 (>= 2.25), libuuid1 (>= 2.16) Description: block device ID library The blkid library allows system programs such as fsck and mount to quickly and easily find block devices by filesystem UUID or label. This allows system administrators to avoid specifying filesystems by hard-coded device names and use a logical naming system instead. Package: libblockdev2 Status: deinstall ok config-files Priority: optional Section: libs Installed-Size: 225 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: libblockdev Version: 2.20-7+deb10u1 Config-Version: 2.20-7+deb10u1 Depends: libblockdev-utils2 (>= 2.14), libc6 (>= 2.17), libglib2.0-0 (>= 2.42.2) Conffiles: /etc/libblockdev/conf.d/00-default.cfg 999c2e5c7f70e9a26d788737a5ded662 Description: Library for manipulating block devices libblockdev is a C library with GObject introspection support that can be used for doing low-level operations with block devices like setting up LVM, BTRFS, LUKS or MD RAID. . The library uses plugins (LVM, BTRFS,...) and serves as a thin wrapper around its plugins' functionality. All the plugins, however, can be used as standalone libraries. One of the core principles of libblockdev is that it is stateless from the storage configuration's perspective (e.g. it has no information about VGs when creating an LV). Homepage: https://github.com/storaged-project/libblockdev Package: libbluetooth3 Status: install ok installed Priority: optional Section: libs Installed-Size: 256 Maintainer: Debian Bluetooth Maintainers Architecture: arm64 Multi-Arch: same Source: bluez Version: 5.50-1.2~deb10u5 Replaces: libsdp2 (<= 1.5-2) Depends: libc6 (>= 2.17), libudev1 (>= 183) Conflicts: libsdp2 (<= 1.5-2) Description: Library to use the BlueZ Linux Bluetooth stack BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Homepage: http://www.bluez.org Package: libbrotli1 Status: install ok installed Priority: optional Section: libs Installed-Size: 709 Maintainer: Tomasz Buchert Architecture: arm64 Multi-Arch: same Source: brotli Version: 1.0.7-2+deb10u1 Depends: libc6 (>= 2.17) Description: library implementing brotli encoder and decoder (shared libraries) Brotli is a generic-purpose lossless compression algorithm that compresses data using a combination of a modern variant of the LZ77 algorithm, Huffman coding and 2nd order context modeling, with a compression ratio comparable to the best currently available general-purpose compression methods. It is similar in speed with deflate but offers more dense compression. . This package installs shared libraries. Homepage: https://github.com/google/brotli Package: libbs2b0 Status: install ok installed Priority: extra Section: libs Installed-Size: 38 Maintainer: Andrew Gainer Architecture: arm64 Multi-Arch: same Source: libbs2b Version: 3.1.0+dfsg-2.2 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1) Description: Bauer stereophonic-to-binaural DSP library The Bauer stereophonic-to-binaural DSP (bs2b) is designed to improve headphone listening of stereo audio records. . Typical stereo recordings are made for listening with speakers. What's missing in headphones is the sound going from each channel to the opposite ear, arriving a short time later for the extra distance traveled, and with a bit of high frequency roll-off for the shadowing effect of the head. The time delay to the far ear should also be somewhat longer at low frequencies than at high frequencies. bs2b implements both of these ideas to transform stereophonic recordings for headphone listening. Homepage: http://bs2b.sourceforge.net/ Package: libbsd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 179 Maintainer: Guillem Jover Architecture: arm64 Multi-Arch: same Source: libbsd Version: 0.9.1-2+deb10u1 Depends: libc6 (>= 2.25) Description: utility functions from BSD systems - shared library This library provides some C functions such as strlcpy() that are commonly available on BSD systems but not on others like GNU systems. . For a detailed list of the provided functions, please see the libbsd-dev package description. Homepage: https://libbsd.freedesktop.org/ Package: libbz2-1.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 104 Maintainer: Anibal Monsalve Salazar Architecture: arm64 Multi-Arch: same Source: bzip2 Version: 1.0.6-9.2~deb10u2 Depends: libc6 (>= 2.17) Description: high-quality block-sorting file compressor library - runtime This package contains libbzip2 which is used by the bzip2 compressor. . bzip2 is a freely available, patent free, data compressor. . bzip2 compresses files using the Burrows-Wheeler block-sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors. . The archive file format of bzip2 (.bz2) is incompatible with that of its predecessor, bzip (.bz). Homepage: https://web.archive.org/web/20180801004107/http://www.bzip.org/ Package: libc-bin Essential: yes Status: install ok installed Priority: required Section: libs Installed-Size: 3066 Maintainer: GNU Libc Maintainers Architecture: arm64 Multi-Arch: foreign Source: glibc Version: 2.28-10+deb10u4 Depends: libc6 (>> 2.28), libc6 (<< 2.29) Recommends: manpages Conffiles: /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6 Description: GNU C Library: Binaries This package contains utility programs related to the GNU C Library. . * catchsegv: catch segmentation faults in programs * getconf: query system configuration variables * getent: get entries from administrative databases * iconv, iconvconfig: convert between character encodings * ldd, ldconfig: print/configure shared library dependencies * locale, localedef: show/generate locale definitions * tzselect, zdump, zic: select/dump/compile time zones Homepage: https://www.gnu.org/software/libc/libc.html Package: libc-l10n Status: install ok installed Priority: standard Section: localization Installed-Size: 4230 Maintainer: GNU Libc Maintainers Architecture: all Multi-Arch: foreign Source: glibc Version: 2.28-10+deb10u4 Replaces: locales (<< 2.21-1) Breaks: locales (<< 2.21-1) Description: GNU C Library: localization files This package contains the translation files for the GNU C library and utility programs. Homepage: https://www.gnu.org/software/libc/libc.html Package: libc6 Status: install ok installed Priority: optional Section: libs Installed-Size: 9743 Maintainer: GNU Libc Maintainers Architecture: arm64 Multi-Arch: same Source: glibc Version: 2.28-10+deb10u4 Depends: libgcc1 Recommends: libidn2-0 (>= 2.0.5~) Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.28), locales-all (<< 2.28), nocache (<< 1.1-1~), nscd (<< 2.28), r-cran-later (<< 0.7.5+dfsg-2) Conflicts: openrc (<< 0.27-2~) Conffiles: /etc/ld.so.conf.d/aarch64-linux-gnu.conf da8a2db277c6c69cad56b6c778193e40 Description: GNU C Library: Shared libraries Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. Homepage: https://www.gnu.org/software/libc/libc.html Package: libc6-dbg Status: install ok installed Priority: optional Section: debug Installed-Size: 16296 Maintainer: GNU Libc Maintainers Architecture: arm64 Multi-Arch: same Source: glibc Version: 2.28-10+deb10u4 Provides: libc-dbg Depends: libc6 (= 2.28-10+deb10u4) Description: GNU C Library: detached debugging symbols This package contains the detached debugging symbols for the GNU C library. Homepage: https://www.gnu.org/software/libc/libc.html Build-Ids: 011503df620076df0e3df1f040093fe8b8712fd2 016c43fe2037786992729180cba6f80794326c15 01bad2fa6847b53c3879b8f930edf87264415be7 01f6376ecfe59ea487ed528623a5d3641d820a9a 0214c80c9d28241ce899debf50c40107f0436694 0317c32f12d8dd9cb336e214bfcf6bc5128cdbe8 048d081b2f6ad0cd5e899132c7c7439f10854c1c 05e3076e6af3a201975f4ce0c588c08d90600e07 066d77136a87cf65f4a30b442f9eba0e9f3375fa 0829e41b5dd5862624dab6d63b430c53fad7f538 089b53833c14108afe49528bd397d12c68106e7e 08dccd4109d28efe8f9fd619001161e8f3c4c6e0 094b655af544b0ae56274487cbf9d804508f03ff 0b2c899a4159c1403559da6bcaf1538d96912637 0b9c46641d4cb772dd7ac7a09fa116c8405933e3 0d76ff78dd87be65707246e30dcb34a2dce33a2e 0e0bd12baf3312554d967279029dac977a799510 0fc0780ebe107b13a20c23061bbc59a0e3edaaad 10dba3c35f426396945c1ac455c72e544f98eca2 1146d8a8e07bce4e5b5e3d2ea5ce752f70c95b44 13863c546e387a3978f8064b44aef589296af7bb 13ba0d0a2a6fe7885b3c054a1b3470711df9c077 141bfcf0620961343fd44ce154751699d3099417 14fd91f4b84faf6e44ff99840f923e949497c16a 15c23319cbe34bff7792179c5a75c945763d80a5 1630cf2b875c0403c10f597f13672d4fcf924a41 1662f3aae4b4df1e4f0f2b9b5022c633ad69eb31 172e5212a929eb6d4487eb439f372ad8a3082b9b 176c15820c3b9deefc8a0d1d80cdb16eb8060bcd 17a3826ab7db43e7cef8df2aa3f91c76fee800a7 18e5ea91335ff40499d4a04127f15e7e973c2650 18e6de27383552f2a83cf37e6561ffb0b285a617 197851c16a53646c1fcd3d8704710551b027db23 1981d8619339427f0e284f27ea07860495b2daad 1e836127e9216a5d7a5d65aa95df118dbd6adf50 20e9276ac554960b7dad61656991a2e9cdc432f9 2106f4ef7c7ec13d4a73f70c3cdf1b12d62a71c9 216fdc06dcccab2f303695394ae3d00d7e035f00 22cf26fc54588ef68f140487b479d6e1e7c34306 232a51eca2ed52c6b620c9cd575daee909b0689f 23977940429f0b765a7b57a680b2d06105f841ce 243e27154e0d617b6c32b605aab9601c9e025c41 245870ae24a9506e8bf1a3dbecf518f2df906a4a 25890dcf2aacea81015308468f7e34ea9202ead1 26cfc99233e42d6e5376a363bc74ade482f31d7b 292d21b53a7c312a1c9f820aeb5ae271444f8dfc 29582db260f74ce98aedda1f93af4f5c382f950d 29f1ad6abf6dfacb86600ba54ba5494b2163a7a7 2c571bb8641bbc37a2c25896563658b28bb2b3a2 2d3e057c91e4e45c48a61cb04246fc88a3dc650d 2f476dcbc261844a34cff79eea7904aa79312e7a 346afea18a908bcfc7d4f4c6c060a63d88649b4e 37ba608d1121482220a4d58654bd63885645641e 388c7e714409d55e0fb99f311cd5a51a47e3801f 3a2fbb3b757c5a64428d6bd4413105e8af8e4fb9 3ade1e18de82dacfc8b56d4ab20dbd57a01e93bb 3aee3a0bdd62c8e5733868842ef3c0b031b8b60c 3c4e90da1dc489b0da711dd0e7de96ea3acc1697 3d6cd9fb00f926a1e1051f0f31326b7bda66dcb8 3dcf2704ef700474f75773f0ce3a37ca28c2f215 3e5fa6e21ba942a5fbf1ffa05be5e78e30e98034 3ed8732eb9809348a4cabcd449c9915606a9e1c8 3f6ec7007160781213e7b289f4efe6362d820665 403ffed415c2e2ae8a499339fce6c2d245308eab 41f945250db32cdc42c13421935ebe8bfcf2b4ee 422193b383d7a7ad8ace818880493211e0fd6bfb 425487f37f01467aad822f350116e9a083549c39 44a326d12293e90185a1a0cc603028af2c814c97 4505606edb6bccab5910bad2e51f42cb59531717 452477fb5a5649d9fecbfadaa23ebec69663e063 45d3a6ea4ffdad6129cca932f572a98ec310d640 45da85abcfbc1fb3243577a16acf85a4eb4e7749 46f6bfdcbdf7e637a3da92148af3fb35b611fee2 48a586c6d2b9239e82c10e2934ae3e931bf26058 497ed1ed2e65d381c9af36d3e73c4d7446a2db6a 4b05bef1ff087dc85f2b685d4bac2c8e12e310a3 4b488a99e7d40dfb321601dcb097d2bb9c04e1bc 4be81c02181906a48faaa3fd4382a260a3c0f769 4c04b55afe16b4945f1964f090ebcfac8e39a943 4c8a3634917e76085fdabd76a04a5e19386f81bf 4d115ee924b3be59d2ff4c89b8f2b1aa97f1a996 4e646271fa262d8b513cad4946c222e146ebb9f6 4f76b6bcf8e26d6f177ca9ba8876c526ceaf1b22 4fa1fb560d73cae2c1c8bf832d0d69da174ba644 4fc975d114dfb5f93143874e5eededc8ca348d7d 50054dcf8c4d2df63cec80aa969f86c74cc1dbf0 5084b996a7734629c421508dbd17b3b3bf446754 511f427bb08e0a2d6f6cd34343eab241fc39adbf 51b6f16ebad8b9230b13f896e458db740a515d94 51d1f2d19d91eb4acfeecfb0cc129967824068ae 536c73f5b77a66566a646a338bab6caa7862662c 53c897f3d783adf245624f5d0f5071e8a5b8d7ce 54ac87e25a11efa558f37fff98a3d44fa5345037 55c42baf1884dceb6d69bd30ad9a97514e33b80f 563bc8c91b4a5913a4e058b34ffda6fcb07a1a89 5675e6a9923bee398b3cd3130e7ac4dc65b96b0e 5765bd236715a59697481b00332e6b57a274e62e 582c98d85b9181bdc6dc26623e8aa1a5af63cc9d 58ac2dbcbffcfbfc502382d7413a4c8787cfef5d 59e85d281381a08b26e2673bbf877be370d06e1f 5a6ff9d40e4e061f022c52f6716173b48265c9a7 5c34205e966ec846307d7f0a7f68518da3bd06e3 5c4914f6b619b0fb7da737846499c5e8a529ed9c 5c70351496734ab62f4d3ed238d04fba78aa5e8d 5d2ad7f5f0e223a37291b200e3b5101c2db6e44a 5e0e858fc1144959f1f33c849f95300883ae7bf9 5ee6faff800c32cbaaec430544e342434ebf6c36 5f510769241e5e8d25520e9f59b314ed695d5a22 6182915c3efcf6db4da83d69d996c40ef1544593 618f5da8518c972012213197fe09d6f2e880623a 633438af0f01ff2941f4b08f76789da1ef85445f 63bca5f0d639060f2db6ff2cd68158c60b6de5e3 645d5903c2710260bd62fc3cbb4bda62034267bb 653f007427c5c1c93b96e2ea70114cf0cc9cfb1f 654b5cd9f5797b4d7a1243affb313d986acd967a 65b839a24413eb15dac0d2179b1b0abf48d6bbd3 66740194eb8ba5b550aad7ebf8fe30ab8b10a108 677e23cd2fed2c524d5765e3cdcb386d08720c22 69504ef9a9b47e8356f4ce6c94293207ee646019 6a4a15ab1df78e1cc6195a5c20e5e3f5e113ae08 6c471830c59af637ffc22c2de27e05068ad98ef8 6cfe71ee093ee761600092149594e418a5378fc9 6d07ee9cc9262caab556f72cdd65cc49330d3e20 6d53051275216588c64348d1a4c5cb641a1717c5 6ddc84f830d8c79e292ba8efedc727f4c3aa8571 6e4b1f9675840f84cbc26d7b29546bf486a2a8bb 6f51417bbcb06e23e28e7b9aeb4925549add51b7 714039596602fc3c7cdf8d0f7f910043b75719af 718d9435af0e07cfe74d947ba13af6ad9951d98a 71c89dc3db3381c44328a086fdb42db3fe6b6a8a 72cd064b6840e8ddc69c9d7aa3cd2634477d9e85 7403a3f2adca6b27c8facaf931ae3280af04cfce 7430093f12301defb3c85d66339912c8c14bdfbc 74e0652807c01d570badc6d5190be1dd3dab8430 756b45d353d7766aab3e67ba92bf2d6cf56b13f2 7626332d8a044cff1377fe6efb6ea29119955a84 76b11c7937665f07d7dcf59c3894eb62bf19a997 77cf822bfece0791d346cb79aad00f3d308f7830 77d9770555d28e07033a3c53014bc66111ea8473 7a96d1933e3359f8bd32eb37c09f6c6362463cd6 7b4c45d6615cc30e3ae235250913bacee42b60a1 7e58b038b5f6f8e50d8048186418176c2011ceb6 7ee4e1f764fe619d1dad03576fa1f0eb4a8ded0e 80544d2128c859f2efbe241363352cee22031809 80da0857648eee798913a2a4af4fe436dc17cbd1 816e1a3f9b5fcf1add6ce42c15026dc785e88719 829abd002970610bb06190069f29282d3879968f 8541780578b46c106a8cc876a2dfc3992ce6413e 85ebb10e265bfc7ceed64f76d099462e72d017cd 86010f9020e6f3c008cc670e2c8be16e92578b75 869937e23440d1c5f0a013886590215526943b57 86e24df04c5578235c606096ba28bdf557a04640 870bedf4d7b30f96832a3f1c6c311ce018ca5c5b 882f249b368c0a6a11d660ae2ce69b3591aaa1c9 88488b9aba04d0316d9dfe0aa97a7d5df175608e 88f2e0c215beb4ec1d726b923c47aaa59022c0fc 8c6994f53713ab085dc7308f3fda8988106b0ec5 8e1cb318325c8753a1b81f26b51eb521aa0b8ba4 8e22c7107eff62e796e1e51e542b5d20ddac7815 912cfed5c9d5c721f173354d0ca20d6cccc8df4e 9165803a83698746c3c9d8a8167b920cc0d6be89 92343f0003805431cc3bcebade7cf6bb53561664 92c1e21664d0a1bf7c037b25499c5abf4fec56f8 930ef64652201cd1e09e344198c2adbd592fd188 94b23a093d868664553bc0ec18e655183ae6e9a8 9563dc72a65f2169b3ac1fe7911e571a3174725e 979cca00751170278ab949ec8be164718b31a5d8 98bf6e405e93ad52bba90e09bdd3fcdf96186652 9a2a53cb4c63e9f661322aafea2c0e9155f6237c 9a71ef20d863e3a80091be305f0b27a95012301c 9c43bafa9d64e2f1d6d50e8dfd2a57228b357acc 9ccf5f82592c3524dccd7f0444a21ff6fcaf067f 9d840a5fe4bfc4ea4fba91c82ac0baebed92c5d3 9f3d6bdccd3edd371bec64bee117f189ced3f297 9fe08b6096bc4bc3a1d396e1a81ea57b99a49a4d a105606a8c6850772ad18767a7838433be1efcbf a13cf2c8d173f5f71082df454b2773c7e8356c37 a2a37773bf7c2ad8374e671144b93fca43fa8f72 a2d4b3d79840cfa2b28096370d7ffac3733ecfae a2e93301a7463fbb23fc20517ad180c92ee747bb a31c504a430d298a82e2947b14a308562523bcaf a39f6f27255923fadc84fdda284bc1a5f15be83b a3b208168a92c41ec127ab8557ed04fa7b5acbef a4ad9649905ccee2cbd2e8ed5845f8102ef05d7d a4c43273b601e3eeb9cd2cf5fabf9aba7b710f61 a5b47c7aca985ed5e844ca23f1566488c4ad0242 a6dce3df9b00ede0f3629b8d83ffc13824982b3f a6f927ae2b88c7a2eecfbcf4b75f44d9919b4a6b a6fec0a32d1975de783baf6f1db6abe6e04b9652 a89047fa804fd447c23dabb0652b3812eb514e72 a93cc8da07ba694290e632368bcd4c631f696d70 aba16a28d7a32cffa1a552eec177593f152e1ff9 ac12d9d6b5a377a015bd519e73869d4ab51c9854 accd572cfc29dc43b1d4b521467cd2e8f4068762 ae533b2cd1d91820f3ee6421da1f42047b9f279b afb5518f8b8e39c9eb21580ec1b085b80aef0188 b04f9b2d6b22f565ef3c03b97a86f1dd5c870008 b164aad987495638acaa50f7219326f70e1ffa25 b2a8848b724c6dc51e03e54c451c2c2a6081a3a5 b3d86b5ec6b92f8dbf6679caa6528f7ca025bd7a b530d75947aa88fb202b0d03ba6bd4d28ebd17dc b5cd8a9d0ef0c5bd7031f42050b03faee44e346d b7385237b3baa30ef1f4717c3da75737b6b3718b b77517cf92dbe8ddfd1b329034fd7e959ab92a8c b8afc28f7933506a0a3f131458b051b60bc9aeb0 ba3c8668d87e783ea3b90d503266068ee1b95cce baaf3e62a994d8d57b7122462488f98c1cc7132b bc8e97d39dac5e3d25e9a27955ddbd86abd2e289 be5e56a4938d1449a090d52de66a129ebf298b53 bf4a55d2289b3ab15e439fd88f31c0bb48473544 bf5c4bf9e55b7d90d010dfdb62e6bbe5ac0cb69b bfd0d724d3b913f038a6216cefc6ed7fbbeb57d0 bfd62a740427099c414928ef57eae9f0cc19ce79 c0ae50581adf2de07426ddc128d80761761d80d5 c108353412e72bfb95b583a413acccbd4fb6e6f4 c3303ffb5c20fc34042e5a6405f3957a50d4da68 c3627bbcb85ff63223ecb7c4cc6480ae10cc79fd c4360f74b73c41f6929009a138dde9e70453de45 c571194bdcdc218d961391e6c2d494d97b509087 c63271e84fde21be605d7dded711892fd7cfa640 c64d83ea3e9c5b301d0affd1ab06f7566a5df8a1 c854366ac153ab1a1353af87b8bb0546628d70db c88089a2b3267d317e22928ed3852efdce0b6c68 c907b6e6c92fb9e77cb53dc8786d96c91979622f ca02b3ae1c0627325ec92f2a582d2015c4104884 cabff5261f6917fdcd2843da6af5be49dfb08f78 cacda92be71e849c32b14fb0076518b6b4321745 cba09ec3227688c3cb2db9001733d47421aa68ab cc6195492f60044212d93e074ad363b7b9e211a8 cf1106cdb08beefc907ed0396f8be97b6e9a368d d026f55f5ce9c4fa031045af55530423eb06bdae d10227f3cac9009d07638c87a1b43cd3ae6ca55b d16a31114d6ec04d3e3497cb97525aad4470e73c d2dbfa826ba6b593a7aa2350556d7f1b0163f133 d39309d42c572c8a975d96567fb8cac600e9a1b9 d6042e6edafa84923d2b77cb0001b99bfacc9eb4 d787a126f613efc7e9a5d7b5182b8b71c268bcae da4822094e904e5a49ee0dd95879a022f0c8e0ec db9f44fa94b3aaa6ada59032adef0600a4bd9ced dbb6904ac4cb58a689acb3f1c488eeb7d3f597be dbe48c1fd85c45aea354df3beaac21759c189d5d dbe72aa8c1e003503a8565ef8df5ffc4eb0b90fd dd45d2daffc5cf5d94f88fa424669c93bd9936a6 dd8099a473e7c4011f551a98649bf19a699d11e6 dde08d1b5e5280efb00565b418081e96e3982754 de14fc38e6ea25c21949bb21fe1af80fa376e8d9 de857099411ff103922f12e28af22377e37e0c58 e09b49c22b4b990924f536c821257c06d09d624a e0f940720442e51ade11e520493fd168af0d0aba e33497cd5494890560fd8d06060186fc7c2ba80a e5f25db597ff7e8599db1fd7100a7d786445cc67 e64769e6fef147a55d5c9d4cfdd2c2ee0fe93dcd e6940298242b86f2357ce88780e1cd3f3ddd4114 e78fd37acabcb1b0b061a61588bfeb91a1b9dfea e8e90e55aef9db7fb14827443615979e172df7e3 e9b9fe7447c2ea66c33624eefcad14ce0526a8cc eacfd3b538ea2d03cfbe0a082ae5231b7f381960 ec367b4b14150735ad94c2d23eff5f8ab7d5aac6 ec72d7a528c20163f41c799e0fadfbd97e1802c9 ef455dfaa8a4c0b566a87205171e9e697cf832d1 f07b1acbfb9a6ce9722cd29997136a5e5f47ba67 f32fb8ebaad12fbe251197f24efd818323d60c43 f43f41493ba8246d8ad11779823b81ff23bc785d f5081bd2a7ed4944b85afc672c0b37d0347c71bf f5a9cf3d09250dd7e9ab7eb3850a5eecab0c2190 f6a005f86ec396ad8b094150ca50579f58a289f2 f6c44c1d0433b35c3865d015d8d1abb2e3e7363a f747a59e4cb866954e6034e9aa089413dd7e0381 f81d89317aa413038d811471ee8ddc5800c04929 f966e2a3aba8e24305b66bd5be6bccdbd1722571 fa901d2b4eca35051c127c4bdb861590cae36643 fab22f41043112e83e0de5d505b8f8c8c331792e fb6cf87ed7cdb8359c11e3f545bd3e380e331109 fba3b7b3c5bc6e63d535280cb691d4604d756ae7 fce666d3866c5074d97eebef5cba95e46bbf60be Package: libcaca0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1024 Maintainer: Sam Hocevar Architecture: arm64 Multi-Arch: same Source: libcaca Version: 0.99.beta19-2.1+deb10u1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libncursesw6 (>= 6), libslang2 (>= 2.2.4), libstdc++6 (>= 4.1.1), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4) Description: colour ASCII art library libcaca is the Colour AsCii Art library. It provides high level functions for colour text drawing, simple primitives for line, polygon and ellipse drawing, as well as powerful image to text conversion routines. . This package contains the shared library for libcaca. Homepage: http://caca.zoy.org/wiki/libcaca Package: libcairo-gobject2 Status: install ok installed Priority: optional Section: libs Installed-Size: 179 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: cairo Version: 1.16.0-4+deb10u1 Depends: libcairo2 (>= 1.10.0), libglib2.0-0 (>= 2.14.0) Description: Cairo 2D vector graphics library (GObject library) Cairo is a multi-platform library providing anti-aliased vector-based rendering for multiple target backends. . This package contains the GObject library, providing wrapper GObject types for all cairo types. Homepage: https://cairographics.org/ Package: libcairo2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1343 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: cairo Version: 1.16.0-4+deb10u1 Depends: libc6 (>= 2.17), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libpixman-1-0 (>= 0.30.0), libpng16-16 (>= 1.6.2-1), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4) Breaks: libwebkit2gtk-3.0-25 (<< 2.4.5-2~), libwebkitgtk-1.0-0 (<< 2.4.5-2~), libwebkitgtk-3.0-0 (<< 2.4.5-2~), weston (<< 1.5.0-3~) Description: Cairo 2D vector graphics library Cairo is a multi-platform library providing anti-aliased vector-based rendering for multiple target backends. Paths consist of line segments and cubic splines and can be rendered at any width with various join and cap styles. All colors may be specified with optional translucence (opacity/alpha) and combined using the extended Porter/Duff compositing algebra as found in the X Render Extension. . Cairo exports a stateful rendering API similar in spirit to the path construction, text, and painting operators of PostScript, (with the significant addition of translucence in the imaging model). When complete, the API is intended to support the complete imaging model of PDF 1.4. . This package contains the shared libraries. Homepage: https://cairographics.org/ Package: libcairomm-1.0-1v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 199 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: cairomm Version: 1.12.2-4 Replaces: libcairomm-1.0-1 Depends: libc6 (>= 2.17), libcairo2 (>= 1.12.0), libgcc1 (>= 1:3.0), libsigc++-2.0-0v5 (>= 2.5.1), libstdc++6 (>= 5.2) Conflicts: libcairomm-1.0-1 Description: C++ wrappers for Cairo (shared libraries) cairomm provides C++ bindings for the Cairo graphics library, a multi-platform library providing anti-aliased vector-based rendering for multiple target backends. . This package contains the shared libraries. Homepage: http://cairographics.org/cairomm/ Package: libcanberra-gtk3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 40 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libcanberra Version: 0.30-7 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libcanberra0 (>= 0.12), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.16.0), libgtk-3-0 (>= 3.0.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libx11-6 Recommends: libcanberra-gtk3-module Description: GTK+ 3.0 helper for playing widget event sounds with libcanberra libcanberra-gtk provides a few functions that simplify libcanberra usage from GTK+ 3.0. . Contextual information is needed to play event sound. This library can help to compile directly event sounds property lists based on active GtkWidget objects or GdkEvent events. Homepage: http://0pointer.de/lennart/projects/libcanberra/ Package: libcanberra0 Status: install ok installed Priority: optional Section: libs Installed-Size: 118 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libcanberra Version: 0.30-7 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.17), libltdl7 (>= 2.4.6), libtdb1 (>= 1.2.7+git20101214), libvorbisfile3 (>= 1.1.2), sound-theme-freedesktop Suggests: libcanberra-gtk0, libcanberra-pulse Description: simple abstract interface for playing event sounds libcanberra defines a simple abstract interface for playing event sounds. . libcanberra relies on the XDG sound naming specification for identifying event sounds. On Unix/Linux the right sound to play is found via the mechanisms defined in the XDG sound theming specification. Homepage: http://0pointer.de/lennart/projects/libcanberra/ Package: libcap-ng0 Status: install ok installed Priority: optional Section: libs Installed-Size: 43 Maintainer: Pierre Chifflier Architecture: arm64 Multi-Arch: same Source: libcap-ng Version: 0.7.9-2 Depends: libc6 (>= 2.17) Description: An alternate POSIX capabilities library This library implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . The libcap-ng library is intended to make programming with POSIX capabilities much easier than the traditional libcap library. . This package contains header files and libraries for libcap-ng. Homepage: http://people.redhat.com/sgrubb/libcap-ng Package: libcap2 Status: install ok installed Priority: optional Section: libs Installed-Size: 48 Maintainer: Christian Kastner Architecture: arm64 Multi-Arch: same Version: 1:2.25-2 Depends: libc6 (>= 2.17) Description: POSIX 1003.1e capabilities (library) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains the shared library. Homepage: https://sites.google.com/site/fullycapable/ Package: libcap2-bin Status: install ok installed Priority: important Section: utils Installed-Size: 91 Maintainer: Christian Kastner Architecture: arm64 Multi-Arch: foreign Source: libcap2 Version: 1:2.25-2 Replaces: libcap-bin Depends: libc6 (>= 2.17), libcap2 (>= 1:2.10) Recommends: libpam-cap Breaks: libcap-bin Description: POSIX 1003.1e capabilities (utilities) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains additional utilities. Homepage: https://sites.google.com/site/fullycapable/ Package: libcdio18 Status: install ok installed Priority: optional Section: libs Installed-Size: 296 Maintainer: Debian QA Group Architecture: arm64 Multi-Arch: same Source: libcdio Version: 2.0.0-2 Depends: libc6 (>= 2.27) Description: library to read and control CD-ROM This library is to encapsulate CD-ROM reading and control. Applications wishing to be oblivious of the OS- and device-dependant properties of a CD-ROM can use this library. . Some support for disk image types like BIN/CUE and NRG is available, so applications that use this library also have the ability to read disc images as though they were CD's. Homepage: http://www.gnu.org/software/libcdio/ Package: libcdparanoia0 Status: install ok installed Priority: optional Section: libs Installed-Size: 118 Maintainer: Optical Media Tools Team Architecture: arm64 Multi-Arch: same Source: cdparanoia Version: 3.10.2+debian-13 Depends: libc6 (>= 2.17) Description: audio extraction tool for sampling CDs (library) An audio extraction tool for sampling CDs. Unlike similar programs such as cdda2wav, cdparanoia goes to great lengths to try to extract the audio information without any artifacts such as jitter. . This package contains the library of cdparanoia, so that its routines can be used by other programs. Homepage: http://www.xiph.org/paranoia/ Package: libchromaprint1 Status: install ok installed Priority: optional Section: libs Installed-Size: 98 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: chromaprint Version: 1.4.3-3 Depends: libavcodec58 (>= 7:4.0), libavutil56 (>= 7:4.0), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Description: audio fingerprint library Chromaprint is a library for calculating audio fingerprints which are used by the Acoustid service. Its main purpose is to provide an accurate identifier for record tracks Homepage: https://acoustid.org/chromaprint Package: libcodec2-0.8.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 405 Maintainer: A. Maitland Bottoms Architecture: arm64 Multi-Arch: same Source: codec2 Version: 0.8.1-2 Depends: libc6 (>= 2.27) Description: Codec2 runtime library Next-Generation Digital Voice for Two-Way Radio . Codec2 is an audio codec especially designed for compressing voice at very low bit-rates for applications such as digital voice radio. . This package contains the codec2 runtime library. Homepage: http://www.rowetel.com/blog/?page_id=452 Package: libcolord2 Status: install ok installed Priority: optional Section: libs Installed-Size: 617 Maintainer: Christopher James Halse Rogers Architecture: arm64 Multi-Arch: same Source: colord Version: 1.4.3-4 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), liblcms2-2 (>= 2.6), libudev1 (>= 196) Suggests: colord Description: system service to manage device colour profiles -- runtime colord is a system service that makes it easy to manage, install and generate colour profiles to accurately colour manage input and output devices. . It provides a D-Bus API for system frameworks to query, a persistent data store, and a mechanism for session applications to set system policy. . This package contains a gobject-based convenience library for programs to interact with the colord system daemon. Homepage: http://www.freedesktop.org/software/colord/ Package: libcom-err2 Status: install ok installed Priority: optional Section: libs Installed-Size: 88 Maintainer: Theodore Y. Ts'o Architecture: arm64 Multi-Arch: same Source: e2fsprogs Version: 1.44.5-1+deb10u3 Replaces: libcomerr2 (<< 1.43.9-1~) Provides: libcomerr2 (= 1.44.5-1+deb10u3) Depends: libc6 (>= 2.17) Breaks: libcomerr2 (<< 1.43.9-1~) Description: common error description library libcomerr is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. Homepage: http://e2fsprogs.sourceforge.net Package: libcpufreq0 Status: install ok installed Priority: optional Section: libs Installed-Size: 41 Maintainer: Mattia Dongili Architecture: arm64 Source: cpufrequtils Version: 008-1.1 Depends: libc6 (>= 2.17) Description: shared library to deal with the cpufreq Linux kernel feature This library provide an unified method to access the CPUFreq kernel interface. Homepage: http://kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html Package: libcroco3 Status: install ok installed Priority: optional Section: libs Installed-Size: 334 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libcroco Version: 0.6.12-3 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.16.0), libxml2 (>= 2.7.4) Description: Cascading Style Sheet (CSS) parsing and manipulation toolkit Services provided by Libcroco * A parser module that provides o A SAC like API. SAC stands for Simple API for CSS. SAC is an event driven API which resembles SAX in the xml world. o A CSSOM like API. CSSOM stands for Cascading Style Sheet Object Model. . The libcroco parser implements the CSS Level 2 specification, the CSS forward compatibility rules and the CSS cascading rules. . * A CSS2 selection engine Given an xml element node (that obviously comes from an xml document) and a stylesheet cascade, the Libcroco selection engine can evaluate the css selectors of the cascade and return the style properties associated to the xml element node. . Note that the xml manipulation toolkit used by the libcroco selection engine at the moment is libxml2. . This package contains the shared libraries. Package: libcryptsetup12 Status: install ok installed Priority: optional Section: libs Installed-Size: 421 Maintainer: Debian Cryptsetup Team Architecture: arm64 Multi-Arch: same Source: cryptsetup Version: 2:2.1.0-5+deb10u2 Depends: libargon2-1 (>= 0~20171227), libblkid1 (>= 2.24.2), libc6 (>= 2.25), libdevmapper1.02.1 (>= 2:1.02.97), libjson-c3 (>= 0.11), libssl1.1 (>= 1.1.0), libuuid1 (>= 2.16) Description: disk encryption support - shared library Cryptsetup provides an interface for configuring encryption on block devices (such as /home or swap partitions), using the Linux kernel device mapper target dm-crypt. It features integrated Linux Unified Key Setup (LUKS) support. . This package provides the libcryptsetup shared library. Homepage: https://gitlab.com/cryptsetup/cryptsetup Package: libcups2 Status: install ok installed Priority: optional Section: libs Installed-Size: 729 Maintainer: Debian Printing Team Architecture: arm64 Multi-Arch: same Source: cups Version: 2.2.10-6+deb10u10 Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.17), libgnutls30 (>= 3.6.6), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.2.0) Suggests: cups-common Description: Common UNIX Printing System(tm) - Core library The Common UNIX Printing System (or CUPS(tm)) is a printing system and general replacement for lpd and the like. It supports the Internet Printing Protocol (IPP), and has its own filtering driver model for handling various document types. . This package provides the base shared libraries for CUPS. Homepage: https://www.cups.org/ Package: libcurl3-gnutls Status: hold ok installed Priority: optional Section: libs Installed-Size: 654 Maintainer: Alessandro Ghedini Architecture: arm64 Multi-Arch: same Source: curl Version: 7.64.0-4+deb10u3 Depends: libc6 (>= 2.17), libcom-err2 (>= 1.43.9), libgnutls30 (>= 3.6.6), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libnettle6, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4) Recommends: ca-certificates Description: easy-to-use client-side URL transfer library (GnuTLS flavour) libcurl is an easy-to-use client-side URL transfer library, supporting DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP. . libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling and more! . libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported, fast, thoroughly documented and is already used by many known, big and successful companies and numerous applications. . SSL support is provided by GnuTLS. Homepage: http://curl.haxx.se Package: libcurl4 Status: install ok installed Priority: optional Section: libs Installed-Size: 664 Maintainer: Alessandro Ghedini Architecture: arm64 Multi-Arch: same Source: curl Version: 7.64.0-4+deb10u9 Replaces: libcurl3 Depends: libc6 (>= 2.17), libcom-err2 (>= 1.43.9), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh2-1 (>= 1.7.0), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4) Recommends: ca-certificates Conflicts: libcurl3 Description: easy-to-use client-side URL transfer library (OpenSSL flavour) libcurl is an easy-to-use client-side URL transfer library, supporting DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP. . libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling and more! . libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported, fast, thoroughly documented and is already used by many known, big and successful companies and numerous applications. . SSL support is provided by OpenSSL. Homepage: http://curl.haxx.se Package: libdatrie1 Status: install ok installed Priority: optional Section: libs Installed-Size: 74 Maintainer: Theppitak Karoonboonyanan Architecture: arm64 Multi-Arch: same Source: libdatrie Version: 0.2.12-2 Depends: libc6 (>= 2.17) Description: Double-array trie library This package provides shared libraries needed to run programs that use the datrie library. It is usually automatically installed. Homepage: https://linux.thai.net/projects/libthai Package: libdb5.3 Status: install ok installed Priority: optional Section: libs Installed-Size: 1663 Maintainer: Debian Berkeley DB Team Architecture: arm64 Multi-Arch: same Source: db5.3 Version: 5.3.28+dfsg1-0.5 Depends: libc6 (>= 2.17) Description: Berkeley v5.3 Database Libraries [runtime] This is the runtime package for programs that use the v5.3 Berkeley database library. Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html Package: libdbus-1-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 486 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: dbus Version: 1.12.28-0+deb10u1 Depends: libc6 (>= 2.17), libsystemd0 Recommends: dbus Breaks: dbus (<< 1.9.16-1~) Description: simple interprocess messaging system (library) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . D-Bus supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-Bus also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. . It comes with several bindings, including GLib, Python, Qt and Java. . The daemon can be found in the dbus package. Homepage: http://dbus.freedesktop.org/ Package: libdbus-glib-1-2 Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 202 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: dbus-glib Version: 0.110-4 Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.40) Description: deprecated library for D-Bus IPC D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package provides a deprecated GLib-based shared library for applications using the GLib interface to D-Bus. New code should use GDBus, part of GLib, instead. . See the dbus description for more information about D-Bus in general. Homepage: http://www.freedesktop.org/wiki/Software/DBusBindings Package: libdbusmenu-glib4 Status: install ok installed Priority: optional Section: libs Installed-Size: 150 Maintainer: The Ayatana Packagers Architecture: arm64 Multi-Arch: same Source: libdbusmenu Version: 18.10.20180917~bzr490+repack1-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3) Description: library for passing menus over DBus libdbusmenu passes a menu structure across DBus so that a program can create a menu simply without worrying about how it is displayed on the other side of the bus. . This package contains shared libraries to be used by applications. Homepage: https://launchpad.net/dbusmenu Package: libdbusmenu-gtk3-4 Status: install ok installed Priority: optional Section: libs Installed-Size: 116 Maintainer: The Ayatana Packagers Architecture: arm64 Multi-Arch: same Source: libdbusmenu Version: 18.10.20180917~bzr490+repack1-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libdbusmenu-glib4 (>= 0.5.90), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0) Description: library for passing menus over DBus - GTK-3+ version libdbusmenu passes a menu structure across DBus so that a program can create a menu simply without worrying about how it is displayed on the other side of the bus. . This package contains shared libraries to be used by GTK-3+ applications. Homepage: https://launchpad.net/dbusmenu Package: libdc1394-22 Status: install ok installed Priority: extra Section: libs Installed-Size: 242 Maintainer: Guus Sliepen Architecture: arm64 Multi-Arch: same Version: 2.2.5-1 Depends: libc6 (>= 2.17), libraw1394-11, libusb-1.0-0 (>= 2:1.0.8) Description: high level programming interface for IEEE 1394 digital cameras libdc1394 is a library that is intended to provide a high level programming interface for application developers who wish to control IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specification (found at http://www.1394ta.org/). . This version of libdc1394 supports both the old and new (juju) FireWire stack. It automatically detects which one to use at runtime. . This package contains shared libraries. Homepage: http://damien.douxchamps.net/ieee1394/libdc1394/ Package: libdconf1 Status: install ok installed Priority: optional Section: libs Installed-Size: 97 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: dconf Version: 0.30.1-2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.55.2) Description: simple configuration storage system - runtime library DConf is a low-level key/value database designed for storing desktop environment settings. . This package contains the runtime library. Homepage: https://wiki.gnome.org/Projects/dconf Package: libde265-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 378 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libde265 Version: 1.0.11-0+deb10u6 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Description: Open H.265 video codec implementation libde265 is an open source implementation of the H.265 video codec. It is written from scratch in plain C for simplicity and efficiency. Its simple API makes it easy to integrate it into other software. Homepage: https://github.com/strukturag/libde265 Package: libdebconfclient0 Status: install ok installed Priority: optional Section: libs Installed-Size: 67 Maintainer: Debian Install System Team Architecture: arm64 Multi-Arch: same Source: cdebconf Version: 0.249 Depends: libc6 (>= 2.17) Description: Debian Configuration Management System (C-implementation library) Debconf is a configuration management system for Debian packages. It is used by some packages to prompt you for information before they are installed. cdebconf is a reimplementation of the original debconf in C. . This library allows C programs to interface with cdebconf. Package: libdevmapper1.02.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 481 Maintainer: Debian LVM Team Architecture: arm64 Multi-Arch: same Source: lvm2 (2.03.02-3) Version: 2:1.02.155-3 Depends: libblkid1 (>= 2.16), libc6 (>= 2.28), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.155-3) Breaks: liblvm2app2.2 (<< 2.02.122), lvm2 (<< 2.02.122) Conflicts: libdevmapper1.02 Description: Linux Kernel Device Mapper userspace library The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but software raid, and other drivers that create "virtual" block devices. . This package contains the (user-space) shared library for accessing the device-mapper; it allows usage of the device-mapper through a clean, consistent interface (as opposed to through kernel ioctls). Homepage: http://sources.redhat.com/lvm2/ Package: libdmx1 Status: install ok installed Priority: optional Section: libs Installed-Size: 42 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libdmx Version: 1:1.1.4-1 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 Distributed Multihead extension library libdmx is an interface to the DMX extension for X, which allows a single server to be set up as a proxy spanning multiple servers -- not unlike Xinerama across discrete physical machines. It can be reconfigured on the fly to change the layout, and it is presented as a single logical display to clients. . libdmx allows clients to configure the layout of DMX servers by adding and removing screens, input devices, et al. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libdmx Package: libdns-export1104 Status: install ok installed Priority: optional Section: libs Installed-Size: 2331 Maintainer: Debian DNS Team Architecture: arm64 Source: bind9 Version: 1:9.11.5.P4+dfsg-5.1+deb10u11 Depends: libc6 (>= 2.17), libisc-export1100, libssl1.1 (>= 1.1.1) Description: Exported DNS Shared Library The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the exported libdns shared library. Homepage: https://www.isc.org/downloads/bind/ Package: libdrm-amdgpu1 Status: install ok installed Priority: optional Section: libs Installed-Size: 75 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libdrm Version: 2.4.97-1 Depends: libc6 (>= 2.28), libdrm2 (>= 2.4.89) Description: Userspace interface to amdgpu-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm-common Status: hold ok installed Priority: optional Section: libs Installed-Size: 32 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: libdrm Version: 2.4.97-1 Description: Userspace interface to kernel DRM services -- common files This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. . This package provides common files for libdrm. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm-cursor Status: hold ok installed Priority: optional Section: libs Installed-Size: 66 Maintainer: Jeffy Chen Architecture: arm64 Version: 1.3.0-1 Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.71), libegl1, libgbm1 (>= 17.3.0~rc1), libgles2 Conffiles: /etc/drm-cursor.conf cf13a57e6ae4d7990339956667699962 Description: A hook of drm cursor APIs to fake cursor plane. Homepage: https://github.com/JeffyCN/libdrm-cursor Package: libdrm-etnaviv1 Status: install ok installed Priority: optional Section: libs Installed-Size: 61 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libdrm Version: 2.4.97-1 Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.38) Description: Userspace interface to etnaviv-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm-nouveau2 Status: install ok installed Priority: optional Section: libs Installed-Size: 73 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libdrm Version: 2.4.97-1 Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.38) Description: Userspace interface to nouveau-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm-radeon1 Status: install ok installed Priority: optional Section: libs Installed-Size: 86 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libdrm Version: 2.4.97-1 Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.38) Description: Userspace interface to radeon-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm2 Status: hold ok installed Priority: optional Section: libs Installed-Size: 107 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libdrm Version: 2.4.97-1 Depends: libdrm-common (>= 2.4.97-1), libc6 (>= 2.17) Description: Userspace interface to kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. . This package provides the runtime environment for libdrm. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdv4 Status: install ok installed Priority: optional Section: libs Installed-Size: 158 Maintainer: Debian QA Group Architecture: arm64 Multi-Arch: same Source: libdv Version: 1.0.0-12 Depends: libc6 (>= 2.17) Suggests: libdv-bin, oss-compat Description: software library for DV format digital video (runtime lib) The Quasar DV Codec (libdv) is a software decoder for DV format video, as defined by the IEC 61834 and SMPTE 314M standards. DV is the encoding format used by consumer-grade digital camcorders. . This package contains the library needed to run executables using libdv. Homepage: http://libdv.sourceforge.net/ Package: libdvbv5-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 424 Maintainer: Gregor Jasny Architecture: arm64 Multi-Arch: same Source: v4l-utils Version: 1.16.3-3 Depends: libc6 (>= 2.17), libudev1 (>= 183) Description: Libraries to control, scan and zap on Digital TV channels This library provides functions to work with DVB devices that implement the DVB v5 API. . This package contains the shared libraries. Homepage: https://linuxtv.org/downloads/v4l-utils/ Package: libdvbv5-doc Status: install ok installed Priority: optional Section: doc Installed-Size: 6617 Maintainer: Gregor Jasny Architecture: all Multi-Arch: foreign Source: v4l-utils Version: 1.16.3-3 Suggests: devhelp Description: Doxygen generated documentation for libdvbv5 This library provides functions to work with DVB devices that implement the DVB v5 API. . This package provides doxygen generated documentation for the library. Homepage: https://linuxtv.org/downloads/v4l-utils/ Package: libdvdnav4 Status: install ok installed Priority: optional Section: libs Installed-Size: 105 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libdvdnav Version: 6.0.0-1 Depends: libc6 (>= 2.17), libdvdread4 (>= 5.0.2) Suggests: libdvdcss2 Breaks: mencoder (<< 2:1.0), mplayer (<< 2:1.0), mplayer2 (<< 2.0-728-g2c378c7-4) Description: DVD navigation library libdvdnav is a DVD navigation library, which provides an interface to the advanced features of DVDs, like menus and navigation. It contains the VM and other parts useful for writing DVD players. It's based on Ogle, but was modified to be used by xine and mplayer. Homepage: https://dvdnav.mplayerhq.hu/ Package: libdvdread4 Status: install ok installed Priority: optional Section: libs Installed-Size: 176 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libdvdread Version: 6.0.1-1 Depends: libc6 (>= 2.17) Recommends: libdvdnav4 Suggests: libdvdcss2 Description: library for reading DVDs libdvdread provides the functionality that is required to access many DVDs. It parses IFO files, reads NAV-blocks, and performs CSS authentication and descrambling. . libdvdread probes for libdvdcss at runtime and if found, will use it to decrypt sections of the DVD as necessary. libdvdcss needs to be installed from third-party repositories (see README.css), it's not included in Debian. Homepage: http://dvdnav.mplayerhq.hu/ Package: libdw1 Status: install ok installed Priority: optional Section: libs Installed-Size: 812 Maintainer: Kurt Roeckx Architecture: arm64 Multi-Arch: same Source: elfutils Version: 0.176-1.1+deb10u1 Depends: libbz2-1.0, libc6 (>= 2.17), libelf1 (= 0.176-1.1+deb10u1), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.2.3) Description: library that provides access to the DWARF debug information libdw1 provides a library that provides access to DWARF debug information stored inside ELF files. . This library is part of elfutils. Homepage: https://sourceware.org/elfutils/ Package: libedit2 Status: install ok installed Priority: optional Section: libs Installed-Size: 250 Maintainer: LLVM Packaging Team Architecture: arm64 Multi-Arch: same Source: libedit Version: 3.1-20181209-1 Replaces: libedit-dev (<< 3.1-20180525-2~) Depends: libbsd0 (>= 0.0), libc6 (>= 2.17), libtinfo6 (>= 6) Description: BSD editline and history libraries Command line editor library provides generic line editing, history, and tokenization functions. . It slightly resembles GNU readline. Homepage: https://www.thrysoee.dk/editline/ Package: libegl-mesa0 Status: install ok installed Priority: optional Section: libs Installed-Size: 323 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: mesa Version: 18.3.6-2+deb10u1 Provides: libegl-vendor Depends: libc6 (>= 2.28), libdrm2 (>= 2.4.81), libexpat1 (>= 2.0.1), libgbm1 (= 18.3.6-2+deb10u1), libglapi-mesa, libwayland-client0 (>= 1.15.0), libwayland-server0 (>= 1.15.0), libx11-xcb1, libxcb-dri2-0 (>= 1.8), libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1 Description: free implementation of the EGL API -- Mesa vendor library This package contains the EGL native platform graphics interface library. EGL provides a platform-agnostic mechanism for creating rendering surfaces for use with other graphics libraries, such as OpenGL|ES. . This package contains the Mesa vendor library for EGL. Homepage: https://mesa3d.org/ Package: libegl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 107 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libglvnd Version: 1.1.0-1 Replaces: libegl1-mesa (<< 17.2.0~rc4-1), libglvnd0 (<< 0.2.999+git20170201-1) Depends: libc6 (>= 2.17), libglvnd0 (= 1.1.0-1), libegl-mesa0 Breaks: libegl1-mesa (<< 17.2.0~rc4-1), libglvnd0 (<< 0.2.999+git20170201-1) Description: Vendor neutral GL dispatch library -- EGL support This is an implementation of the vendor-neutral dispatch layer for arbitrating OpenGL API calls between multiple vendors on a per-screen basis. . This package contains support for EGL. Homepage: https://github.com/NVIDIA/libglvnd Package: libelf1 Status: install ok installed Priority: optional Section: libs Installed-Size: 936 Maintainer: Kurt Roeckx Architecture: arm64 Multi-Arch: same Source: elfutils Version: 0.176-1.1+deb10u1 Depends: libc6 (>= 2.17), zlib1g (>= 1:1.1.4) Description: library to read and write ELF files The libelf1 package provides a shared library which allows reading and writing ELF files on a high level. Third party programs depend on this package to read internals of ELF files. The programs of the elfutils package use it also to generate new ELF files. . This library is part of elfutils. Homepage: https://sourceware.org/elfutils/ Package: libenchant1c2a Status: install ok installed Priority: optional Section: libs Installed-Size: 234 Maintainer: Prach Pongpanich Architecture: arm64 Multi-Arch: same Source: enchant (1.6.0-11.1) Version: 1.6.0-11.1+b1 Replaces: libenchant-dev (<< 1.1.1++cvs.2003.11.08), libenchant1, libenchant1c2 Depends: aspell-en | myspell-dictionary | aspell-dictionary | ispell-dictionary | hunspell-dictionary, libaspell15 (>= 0.60.7~20110707), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.35.9), libhunspell-1.7-0, libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4) Recommends: enchant Suggests: libenchant-voikko Breaks: ispell (<< 3.3.02), libenchant1, libenchant1c2 Description: Wrapper library for various spell checker engines (runtime libs) Enchant is a generic spell checking library which uses existing spell checker engines such as ispell, aspell and myspell as its backends. . Enchant steps in to provide uniformity and conformity on top of these libraries, and implement certain features that may be lacking in any individual provider library. . This package contains the shared library and non-Voikko enchant plugins. Homepage: http://www.abisource.com/projects/enchant/ Package: libencode-locale-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 34 Maintainer: Debian Perl Group Architecture: all Version: 1.05-1 Depends: perl Description: utility to determine the locale encoding In many applications it's wise to let Perl use Unicode for the strings it processes. Most of the interfaces Perl has to the outside world are still byte based. Programs therefore need to decode byte strings that enter the program from the outside and encode them again on the way out. . The POSIX locale system is used to specify both the language conventions requested by the user and the preferred character set to consume and output. The Encode::Locale module looks up the charset and encoding (called a CODESET in the locale jargon) and arranges for the Encode module to know this encoding under the name "locale". It means bytes obtained from the environment can be converted to Unicode strings by calling Encode::encode(locale => $bytes) and converted back again with Encode::decode(locale => $string). Homepage: https://metacpan.org/release/Encode-Locale Package: libepoxy0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1426 Maintainer: Jérémy Lal Architecture: arm64 Multi-Arch: same Source: libepoxy Version: 1.5.3-0.1 Depends: libc6 (>= 2.17) Description: OpenGL function pointer management library It hides the complexity of dlopen(), dlsym(), glXGetProcAddress(), eglGetProcAddress(), etc. from the app developer, with very little knowledge needed on their part. They get to read GL specs and write code using undecorated function names like glCompileShader(). Homepage: https://github.com/anholt/libepoxy Package: libestr0 Status: install ok installed Priority: extra Section: libs Installed-Size: 31 Maintainer: Pierre Chifflier Architecture: arm64 Multi-Arch: same Source: libestr Version: 0.1.10-2.1 Depends: libc6 (>= 2.17) Description: Helper functions for handling strings (lib) The 'libestr' library contains some essential string manipulation functions and more, like escaping special characters. . This package contains the shared library. Homepage: http://libestr.sourceforge.net/ Package: libevdev2 Status: install ok installed Priority: optional Section: libs Installed-Size: 127 Maintainer: Stephen Kitt Architecture: arm64 Multi-Arch: same Source: libevdev Version: 1.6.0+dfsg-1 Depends: libc6 (>= 2.17) Description: wrapper library for evdev devices libevdev is a wrapper library for evdev devices. It provides functions covering the common tasks when dealing with evdev devices, thus avoiding erroneous ioctls and other errors. . This package contains the files required to run software using libevdev. Homepage: https://www.freedesktop.org/wiki/Software/libevdev/ Package: libexif12 Status: install ok installed Priority: optional Section: libs Installed-Size: 1989 Maintainer: Debian PhotoTools Maintainers Architecture: arm64 Multi-Arch: same Source: libexif Version: 0.6.21-5.1+deb10u5 Depends: libc6 (>= 2.17) Description: library to parse EXIF files Most digital cameras produce EXIF files, which are JPEG files with extra tags that contain information about the image. The EXIF library allows you to parse an EXIF file and read the data from those tags. Homepage: https://libexif.github.io/ Package: libexpat1 Status: hold ok installed Priority: optional Section: libs Installed-Size: 420 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Multi-Arch: same Source: expat Version: 2.2.6-2+deb10u5 Depends: libc6 (>= 2.25) Conflicts: wink (<= 1.5.1060-4) Description: XML parsing C library - runtime library This package contains the runtime, shared library of expat, the C library for parsing XML. Expat is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). Homepage: https://libexpat.github.io/ Package: libext2fs2 Status: install ok installed Priority: optional Section: libs Installed-Size: 475 Maintainer: Theodore Y. Ts'o Architecture: arm64 Multi-Arch: same Source: e2fsprogs Version: 1.44.5-1+deb10u3 Replaces: e2fslibs (<< 1.43.9-1~) Provides: e2fslibs (= 1.44.5-1+deb10u3) Depends: libc6 (>= 2.28) Breaks: e2fslibs (<< 1.43.9-1~) Description: ext2/ext3/ext4 file system libraries The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package provides the ext2fs and e2p libraries, for userspace software that directly accesses extended file systems. Programs that use libext2fs include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include dumpe2fs, chattr, and lsattr. Homepage: http://e2fsprogs.sourceforge.net Package: libfaad2 Status: install ok installed Priority: optional Section: libs Installed-Size: 499 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: faad2 Version: 2.10.0-1~deb10u1 Replaces: libfaad2-0 Depends: libc6 (>= 2.17) Conflicts: libfaad2-0 Description: freeware Advanced Audio Decoder - runtime files FAAD2 is the fastest ISO AAC audio decoder available. FAAD2 correctly decodes all MPEG-4 and MPEG-2 MAIN, LOW, LTP, LD and ER object type AAC files. . This package contains the shared library and an extra library with support for Digital Radio Mondiale (DRM). Homepage: https://github.com/knik0/faad2 Package: libfastjson4 Status: install ok installed Priority: optional Section: libs Installed-Size: 68 Maintainer: Michael Biebl Architecture: arm64 Multi-Arch: same Source: libfastjson Version: 0.99.8-2+deb10u1 Depends: libc6 (>= 2.17) Description: fast json library for C The libfastjson library is a fork from json-c with a focus on performance. . This package contains the shared library. Homepage: https://github.com/rsyslog/libfastjson Package: libfdisk1 Status: install ok installed Priority: optional Section: libs Installed-Size: 546 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: same Source: util-linux Version: 2.33.1-0.1+deb10u1 Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.25), libuuid1 (>= 2.16) Description: fdisk partitioning library The libfdisk library is used for manipulating partition tables. It is the core of the fdisk, cfdisk, and sfdisk tools. Package: libffi6 Status: install ok installed Priority: optional Section: libs Installed-Size: 51 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: same Source: libffi Version: 3.2.1-9 Depends: libc6 (>= 2.17) Description: Foreign Function Interface library runtime A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language. Homepage: https://sourceware.org/libffi/ Package: libfftw3-double3 Status: install ok installed Priority: optional Section: libs Installed-Size: 838 Maintainer: Debian Science Team Architecture: arm64 Multi-Arch: same Source: fftw3 Version: 3.3.8-2 Replaces: libfftw3-3 (<< 3.3.3-1) Depends: libc6 (>= 2.17), libgomp1 (>= 4.9) Suggests: libfftw3-bin, libfftw3-dev Breaks: libfftw3-3 (<< 3.3.3-1) Description: Library for computing Fast Fourier Transforms - Double precision The FFTW library computes Fast Fourier Transforms (FFT) in one or more dimensions. It is extremely fast. This package contains the shared library for double precision transforms. . To get the static library and the header files, you need to install libfftw3-dev. For documentation, see libfftw3-doc. Homepage: http://fftw.org Package: libfile-listing-perl Status: hold ok installed Priority: optional Section: perl Installed-Size: 56 Maintainer: Debian Perl Group Architecture: all Version: 6.04-1 Replaces: libwww-perl (<< 6.00) Depends: perl, libhttp-date-perl Breaks: libwww-perl (<< 6.00) Description: module to parse directory listings File::Listing exports a single function called parse_dir(), which can be used to parse directory listings. . The first parameter to parse_dir() is the directory listing to parse. It can be a scalar, a reference to an array of directory lines or a glob representing a filehandle to read the directory listing from. . The second parameter is the time zone to use when parsing time stamps in the listing. If this value is undefined, then the local time zone is assumed. . The third parameter is the type of listing to assume. Currently supported formats are 'unix', 'apache' and 'dosftp'. The default value 'unix'. Homepage: http://search.cpan.org/dist/File-Listing/ Package: libflac8 Status: install ok installed Priority: optional Section: libs Installed-Size: 357 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: flac Version: 1.3.2-3+deb10u3 Depends: libc6 (>= 2.17), libogg0 (>= 1.0rc3) Description: Free Lossless Audio Codec - runtime C library FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC is similar to MP3, but lossless. The FLAC project consists of: . * The stream format * libFLAC, which implements a reference encoder, stream decoder, and file decoder * flac, which is a command-line wrapper around libFLAC to encode and decode .flac files * Input plugins for various music players (Winamp, XMMS, and more in the works) . This package contains the runtime library libFLAC. Homepage: http://xiph.org/flac/ Package: libflite1 Status: install ok installed Priority: optional Section: libs Installed-Size: 26646 Maintainer: Debian Accessibility Team Architecture: arm64 Multi-Arch: same Source: flite Version: 2.1-release-3 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.17) Description: Small run-time speech synthesis engine - shared libraries Flite is a small fast run-time speech synthesis engine. It is the latest addition to the suite of free software synthesis tools including University of Edinburgh's Festival Speech Synthesis System and Carnegie Mellon University's FestVox project, tools, scripts and documentation for building synthetic voices. However, flite itself does not require either of these systems to run. . It currently only supports the English and Indic languages. . This package contains the shared library objects of Festival Lite Homepage: http://www.speech.cs.cmu.edu/flite Package: libfluidsynth1 Status: install ok installed Priority: optional Section: libs Installed-Size: 455 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: fluidsynth Version: 1.1.11-1+deb10u1 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.17), libglib2.0-0 (>= 2.31.8), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libpulse0 (>= 0.99.1), libreadline7 (>= 6.0), libsndfile1 (>= 1.0.20) Suggests: fluidr3mono-gm-soundfont | timgm6mb-soundfont | fluid-soundfont-gm Description: Real-time MIDI software synthesizer (runtime library) Fluidsynth is a real-time midi synthesizer based on the soundfont2 specifications. It can be used to render MIDI input or MIDI files to audio. The MIDI events are read from a MIDI device. The sound is rendered in real-time to the sound output device. . This package contains the runtime library. Homepage: http://www.fluidsynth.org/ Package: libfm-data Status: install ok installed Priority: optional Section: misc Installed-Size: 1521 Maintainer: Debian LXDE Maintainers Architecture: all Multi-Arch: foreign Source: libfm Version: 1.3.1-1 Replaces: libfm0, libfm1 Breaks: libfm0, libfm1 Conffiles: /etc/xdg/libfm/libfm.conf 428d3e51fff8ead6d0f1b2cae0884e22 Description: file management support (common data) LibFM provides file management functions built on top of Glib/GIO, giving a convenient higher-level API. . This package contains the common data of the core library. Homepage: http://pcmanfm.sourceforge.net/ Package: libfm-extra4 Status: install ok installed Priority: optional Section: libs Installed-Size: 67 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: same Source: libfm Version: 1.3.1-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3) Description: file management support (extra library) LibFM provides file management functions built on top of Glib/GIO giving a convenient higher-level API. . This package contains standalone library which extends libfm. Homepage: http://pcmanfm.sourceforge.net/ Package: libfm-gtk-data Status: install ok installed Priority: optional Section: misc Installed-Size: 161 Maintainer: Debian LXDE Maintainers Architecture: all Multi-Arch: foreign Source: libfm Version: 1.3.1-1 Replaces: libfm-gtk0 Breaks: libfm-gtk-bin (<< 1.0), libfm-gtk0 Description: file management support (GTK+ library common data) LibFM provides file management functions built on top of Glib/GIO, giving a convenient higher-level API. . This package contains the common data of the GTK+ library. Homepage: http://pcmanfm.sourceforge.net/ Package: libfm-gtk4 Status: install ok installed Priority: optional Section: libs Installed-Size: 480 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: same Source: libfm Version: 1.3.1-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfm4 (= 1.3.1-1), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk2.0-0 (>= 2.24.32), libmenu-cache3 (>= 0.4.0), libpango-1.0-0 (>= 1.20.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libfm-gtk-data (>= 1.2.0~) Recommends: eject Suggests: libfm-tools, nautilus-actions Description: file management support (GTK+ 2.0 GUI library) LibFM provides file management functions built on top of Glib/GIO giving a convenient higher-level API. . This package contains the GTK+ version 2.0 GUI. Homepage: http://pcmanfm.sourceforge.net/ Package: libfm-modules Status: install ok installed Priority: optional Section: libs Installed-Size: 168 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: same Source: libfm Version: 1.3.1-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfm-extra4 (>= 1.2.0), libfm-gtk4 (>= 1.3.0), libfm4 (>= 1.3.0), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk2.0-0 (>= 2.18.0), libmenu-cache3 (>= 0.5.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0) Description: file management support (loadable modules for library) LibFM provides file management functions built on top of Glib/GIO giving a convenient higher-level API. . This package contains loadable modules used by libfm* libraries. Homepage: http://pcmanfm.sourceforge.net/ Package: libfm4 Status: install ok installed Priority: optional Section: libs Installed-Size: 360 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: same Source: libfm Version: 1.3.1-1 Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.78), libexif12 (>= 0.6.21-1~), libglib2.0-0 (>= 2.37.3), libmenu-cache3 (>= 0.5.0), libfm-data (>= 1.2.0~), lxmenu-data Recommends: libfm-modules Description: file management support (core library) LibFM provides file management functions built on top of Glib/GIO, giving a convenient higher-level API. . Some features: * Desktop-independent, following FreeDesktop standards; * Fast, light on memory usage, and responsive - well suited to less powerful hardware such as netbooks and thin clients; * Uses GIO/GVFS (like Nautilus) for Trash support and access to remote file systems (FTP, SFTP, WebDAV, Windows shares, etc.); * Clipboard operations are compatible with GTK+/GNOME and Qt/KDE; * Supports both Drag-and-Drop, and the X Direct Save protocol; * Reusable design with the core functions separated out to simplify porting to other GUIs. . This package contains the core library. Homepage: http://pcmanfm.sourceforge.net/ Package: libfontconfig1 Status: install ok installed Priority: optional Section: libs Installed-Size: 525 Maintainer: Debian freedesktop.org maintainers Architecture: arm64 Multi-Arch: same Source: fontconfig Version: 2.13.1-2 Provides: libfontconfig Depends: libc6 (>= 2.17), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.3.9), libuuid1 (>= 2.16), fontconfig-config (>= 2.13.1-2) Breaks: xpdf (<= 3.03-11) Description: generic font configuration library - runtime Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . This package contains the runtime library needed to launch applications using fontconfig. Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/ Package: libfontenc1 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libfontenc (1:1.1.3-1) Version: 1:1.1.3-1+b2 Depends: libc6 (>= 2.17), zlib1g (>= 1:1.1.4) Description: X11 font encoding library libfontenc is a library which helps font libraries portably determine and deal with different encodings of fonts. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libfontenc Package: libfreetype6 Status: install ok installed Priority: optional Section: libs Installed-Size: 791 Maintainer: Hugh McMaster Architecture: arm64 Multi-Arch: same Source: freetype Version: 2.9.1-3+deb10u3 Depends: libc6 (>= 2.17), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4) Description: FreeType 2 font engine, shared library files The FreeType project is a team of volunteers who develop free, portable and high-quality software solutions for digital typography. They specifically target embedded systems and focus on providing small, efficient and ubiquitous products. . The FreeType 2 library is their new software font engine. It has been designed to provide the following important features: * A universal and simple API to manage font files * Support for several font formats through loadable modules * High-quality anti-aliasing * High portability & performance . Supported font formats include: * TrueType files (.ttf) and collections (.ttc) * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format * Type 1 Multiple Master fonts. The FreeType 2 API also provides routines to manage design instances easily * Type 1 CID-keyed fonts * OpenType/CFF (.otf) fonts * CFF/Type 2 fonts * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with the Adobe SVG viewer plugin. * Windows FNT/FON bitmap fonts . This package contains the files needed to run programs that use the FreeType 2 library. Homepage: https://www.freetype.org Package: libfribidi0 Status: install ok installed Priority: optional Section: libs Installed-Size: 171 Maintainer: Debian Hebrew Packaging Team Architecture: arm64 Multi-Arch: same Source: fribidi Version: 1.0.5-3.1+deb10u2 Depends: libc6 (>= 2.17) Description: Free Implementation of the Unicode BiDi algorithm FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic languages. This package contains the shared libraries. Homepage: http://www.fribidi.org/ Package: libfuse2 Status: install ok installed Priority: optional Section: libs Installed-Size: 342 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Multi-Arch: same Source: fuse Version: 2.9.9-1+deb10u1 Depends: libc6 (>= 2.28) Suggests: fuse Conflicts: fuse (<< 2.9.9-1+deb10u1) Description: Filesystem in Userspace (library) Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. . This package contains the shared library. Homepage: https://github.com/libfuse/libfuse/wiki Package: libgbm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 133 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: mesa Version: 18.3.6-2+deb10u1 Depends: libc6 (>= 2.28), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libwayland-server0 (>= 1.15.0) Description: generic buffer management API -- runtime This package contains the GBM buffer management library. It provides a mechanism for allocating buffers for graphics rendering tied to Mesa. . GBM is intended to be used as a native platform for EGL on drm or openwfd. Homepage: https://mesa3d.org/ Package: libgcc1 Status: install ok installed Priority: optional Section: libs Installed-Size: 95 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: same Source: gcc-8 (8.3.0-6) Version: 1:8.3.0-6 Depends: gcc-8-base (= 8.3.0-6), libc6 (>= 2.17) Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Description: GCC support library Shared version of the support library, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. Homepage: http://gcc.gnu.org/ Package: libgcrypt20 Status: install ok installed Priority: optional Section: libs Installed-Size: 958 Maintainer: Debian GnuTLS Maintainers Architecture: arm64 Multi-Arch: same Version: 1.8.4-5+deb10u1 Depends: libc6 (>= 2.17), libgpg-error0 (>= 1.25) Suggests: rng-tools Description: LGPL Crypto library - runtime library libgcrypt contains cryptographic functions. Many important free ciphers, hash algorithms and public key signing algorithms have been implemented: . Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED, Poly1305, Camellia, ChaCha20, IDEA, Salsa, Blake-2, CRC, MD2, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.) Homepage: https://directory.fsf.org/project/libgcrypt/ Package: libgdbm-compat4 Status: install ok installed Priority: optional Section: libs Installed-Size: 66 Maintainer: Dmitry Bogatov Architecture: arm64 Multi-Arch: same Source: gdbm Version: 1.18.1-4 Depends: libc6 (>= 2.17), libgdbm6 (>= 1.16) Description: GNU dbm database routines (legacy support runtime version) GNU dbm ('gdbm') is a library of database functions that use extendible hashing and works similarly to the standard UNIX 'dbm' functions. . The basic use of 'gdbm' is to store key/data pairs in a data file, thus providing a persistent version of the 'dictionary' Abstract Data Type ('hash' to perl programmers). . This package includes library files, required to run old programs, that use legacy 'dbm' interface. For new programs, please use modern interface, provided by libgdbm6 and libgdbm-dev. Homepage: https://gnu.org/software/gdbm Package: libgdbm6 Status: install ok installed Priority: optional Section: libs Installed-Size: 112 Maintainer: Dmitry Bogatov Architecture: arm64 Multi-Arch: same Source: gdbm Version: 1.18.1-4 Depends: libc6 (>= 2.17) Suggests: gdbm-l10n (= 1.18.1-4) Description: GNU dbm database routines (runtime version) GNU dbm ('gdbm') is a library of database functions that use extendible hashing and works similarly to the standard UNIX 'dbm' functions. . The basic use of 'gdbm' is to store key/data pairs in a data file, thus providing a persistent version of the 'dictionary' Abstract Data Type ('hash' to perl programmers). Homepage: https://gnu.org/software/gdbm Package: libgdk-pixbuf2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 527 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gdk-pixbuf Version: 2.38.1+dfsg-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.48.0), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libx11-6, shared-mime-info, libgdk-pixbuf2.0-common (= 2.38.1+dfsg-1) Recommends: libgdk-pixbuf2.0-bin Description: GDK Pixbuf library The GDK Pixbuf library provides: - Image loading and saving facilities. - Fast scaling and compositing of pixbufs. - Simple animation loading (ie. animated GIFs) Homepage: http://www.gtk.org/ Package: libgdk-pixbuf2.0-bin Status: install ok installed Priority: optional Section: libs Installed-Size: 71 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: foreign Source: gdk-pixbuf Version: 2.38.1+dfsg-1 Replaces: libgdk-pixbuf2.0-dev (<< 2.36.12-2~) Depends: libc6 (>= 2.17), libgdk-pixbuf2.0-0 (>= 2.35.4), libglib2.0-0 (>= 2.48.0) Breaks: libgdk-pixbuf2.0-dev (<< 2.36.12-2~) Description: GDK Pixbuf library (thumbnailer) The GDK Pixbuf library provides: - Image loading and saving facilities. - Fast scaling and compositing of pixbufs. - Simple animation loading (ie. animated GIFs) . This package contains the GDK pixdata compression utility, the thumbnailer and a utility for converting images into C code. Homepage: http://www.gtk.org/ Package: libgdk-pixbuf2.0-common Status: install ok installed Priority: optional Section: libs Installed-Size: 2575 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: gdk-pixbuf Version: 2.38.1+dfsg-1 Description: GDK Pixbuf library - data files This package contains the common files and translations for the GDK Pixbuf library. Homepage: http://www.gtk.org/ Package: libgif7 Status: install ok installed Priority: optional Section: libs Installed-Size: 82 Maintainer: Debian QA Group Architecture: arm64 Multi-Arch: same Source: giflib Version: 5.1.4-3+deb10u1 Depends: libc6 (>= 2.17) Description: library for GIF images (library) GIFLIB is a package of portable tools and library routines for working with GIF images. . This package contains the library. Homepage: http://giflib.sourceforge.net/ Package: libgirepository-1.0-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 245 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gobject-introspection Version: 1.58.3-2 Depends: libc6 (>= 2.17), libffi6 (>= 3.2), libglib2.0-0 (>= 2.58.0) Description: Library for handling GObject introspection data (runtime library) GObject Introspection is a project for providing machine readable introspection data of the API of C libraries. This introspection data can be used in several different use cases, for example automatic code generation for bindings, API verification and documentation generation. . GObject Introspection contains tools to generate and handle the introspection data. . This package contains a C library for handling the introspection data. Homepage: https://wiki.gnome.org/GObjectIntrospection Package: libgl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 1087 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libglvnd Version: 1.1.0-1 Replaces: libgl1-mesa-glx (<< 17.2.0~rc4-1), libglvnd0 (<< 0.2.999+git20170201-1) Depends: libc6 (>= 2.17), libglvnd0 (= 1.1.0-1), libglx0 (= 1.1.0-1) Breaks: glx-diversions (<< 0.8), libgl1-mesa-glx (<< 17.2.0~rc4-1), libglvnd0 (<< 0.2.999+git20170201-1) Description: Vendor neutral GL dispatch library -- legacy GL support This is an implementation of the vendor-neutral dispatch layer for arbitrating OpenGL API calls between multiple vendors on a per-screen basis. . This package contains support for old libGL for compatibility reasons. Homepage: https://github.com/NVIDIA/libglvnd Package: libgl1-mesa-dri Status: install ok installed Priority: optional Section: libs Installed-Size: 187710 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: mesa Version: 18.3.6-2+deb10u1 Depends: libc6 (>= 2.28), libdrm-amdgpu1 (>= 2.4.90), libdrm-etnaviv1 (>= 2.4.89), libdrm-nouveau2 (>= 2.4.66), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.84), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc1 (>= 1:3.0), libglapi-mesa, libllvm7 (>= 1:7~svn298832-1~), libsensors5 (>= 1:3.5.0), libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4) Description: free implementation of the OpenGL API -- DRI modules This version of Mesa provides GLX and DRI capabilities: it is capable of both direct and indirect rendering. For direct rendering, it can use DRI modules from the libgl1-mesa-dri package to accelerate drawing. . This package does not include the OpenGL library itself, only the DRI modules for accelerating direct rendering. . For a complete description of Mesa, please look at the libglx-mesa0 package. Homepage: https://mesa3d.org/ Package: libglapi-mesa Status: install ok installed Priority: optional Section: libs Installed-Size: 339 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: mesa Version: 18.3.6-2+deb10u1 Depends: libc6 (>= 2.17) Description: free implementation of the GL API -- shared library The Mesa GL API module is responsible for dispatching all the gl* functions. It is intended to be mainly used by both the libgles1-mesa and libgles2-mesa packages. Homepage: https://mesa3d.org/ Package: libgles2 Status: install ok installed Priority: optional Section: libs Installed-Size: 189 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libglvnd Version: 1.1.0-1 Replaces: libgles2-mesa (<< 17.2.0~rc4-1) Depends: libc6 (>= 2.17), libglvnd0 (= 1.1.0-1) Breaks: libgles2-mesa (<< 17.2.0~rc4-1) Description: Vendor neutral GL dispatch library -- GLESv2 support This is an implementation of the vendor-neutral dispatch layer for arbitrating OpenGL API calls between multiple vendors on a per-screen basis. . This package contains support for GLESv2. Homepage: https://github.com/NVIDIA/libglvnd Package: libglew2.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 855 Maintainer: Alastair McKinstry Architecture: arm64 Multi-Arch: same Source: glew Version: 2.1.0-4 Depends: libc6 (>= 2.17), libgl1, libx11-6 Suggests: glew-utils Description: OpenGL Extension Wrangler - runtime environment For more information about GLEW please refer to the description of the libglew-dev package. . This package contains the runtime support files. Homepage: http://glew.sourceforge.net Package: libglib2.0-0 Status: hold ok triggers-pending Priority: optional Section: libs Installed-Size: 3812 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: glib2.0 Version: 2.58.3-2+deb10u4 Depends: libc6 (>= 2.28), libffi6 (>= 3.2), libmount1 (>= 2.28), libpcre3, libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2) Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs Description: GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared libraries. Triggers-Pending: /usr/lib/aarch64-linux-gnu/gio/modules /usr/share/glib-2.0/schemas Homepage: http://www.gtk.org/ Package: libglib2.0-bin Status: hold ok installed Priority: optional Section: misc Installed-Size: 293 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: foreign Source: glib2.0 Version: 2.58.3-2+deb10u4 Depends: libglib2.0-0 (= 2.58.3-2+deb10u4), libglib2.0-data, libc6 (>= 2.17), libelf1 (>= 0.142) Description: Programs for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the program files which is used for the libraries and others. Homepage: http://www.gtk.org/ Package: libglib2.0-data Status: hold ok installed Priority: optional Section: libs Installed-Size: 8468 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: glib2.0 Version: 2.58.3-2+deb10u4 Description: Common files for GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed for the runtime libraries to display messages in languages other than English. Homepage: http://www.gtk.org/ Package: libglib2.0-dev-bin Status: hold ok installed Priority: optional Section: libdevel Installed-Size: 586 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: foreign Source: glib2.0 Version: 2.58.3-2+deb10u4 Replaces: libglib2.0-bin (<< 2.54.2-5~), libglib2.0-dev (<< 2.53) Depends: python3-distutils, python3:any, libc6 (>= 2.28), libglib2.0-0 (>= 2.39.4) Suggests: libgdk-pixbuf2.0-bin (>= 2.36.12-2~) | libgdk-pixbuf2.0-dev, libxml2-utils Breaks: libglib2.0-bin (<< 2.54.2-5~), libglib2.0-dev (<< 2.53) Description: Development utilities for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed to compile programs against libglib2.0-0. It contains development utilities typically run during compilation and should not be installed directly. Use libglib2.0-dev instead. Homepage: http://www.gtk.org/ Package: libglib2.0-doc Status: install ok installed Priority: optional Section: doc Installed-Size: 20580 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: glib2.0 Version: 2.58.3-2+deb10u6 Suggests: devhelp Description: Documentation files for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the HTML documentation for the GLib library in /usr/share/doc/libglib2.0-doc/ . Homepage: http://www.gtk.org/ Package: libglibmm-2.4-1v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 2778 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: glibmm2.4 Version: 2.58.0-2 Replaces: libglibmm-2.4-1c2a Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.55.1), libsigc++-2.0-0v5 (>= 2.9.1), libstdc++6 (>= 5.2) Conflicts: libglibmm-2.4-1c2a Description: C++ wrapper for the GLib toolkit (shared libraries) GLib is a low-level general-purpose library used mainly by GTK+/GNOME applications, but is useful for other programs as well. glibmm is the C++ wrapper for GLib. . This package contains shared libraries. Homepage: http://www.gtkmm.org/ Package: libglu1-mesa Status: install ok installed Priority: optional Section: libs Installed-Size: 420 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libglu (9.0.0-2.1) Version: 9.0.0-2.1+b3 Replaces: libglu1 Provides: libglu1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libgl1, libstdc++6 (>= 5) Conflicts: libglu1, mesag3 (<< 5.0.0-1), xlibmesa3 Description: Mesa OpenGL utility library (GLU) GLU offers simple interfaces for building mipmaps; checking for the presence of extensions in the OpenGL (or other libraries which follow the same conventions for advertising extensions); drawing piecewise-linear curves, NURBS, quadrics and other primitives (including, but not limited to, teapots); tesselating surfaces; setting up projection matrices and unprojecting screen coordinates to world coordinates. . On Linux, this library is also known as libGLU or libGLU.so.1. . This package provides the SGI implementation of GLU provided by the Mesa project (ergo the "-mesa" suffix). Package: libglvnd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1044 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libglvnd Version: 1.1.0-1 Replaces: libgldispatch0-nvidia Depends: libc6 (>= 2.17) Breaks: libgldispatch0-nvidia Description: Vendor neutral GL dispatch library This is an implementation of the vendor-neutral dispatch layer for arbitrating OpenGL API calls between multiple vendors on a per-screen basis. . This package contains the GL dispatch library. Homepage: https://github.com/NVIDIA/libglvnd Package: libglx-mesa0 Status: install ok installed Priority: optional Section: libs Installed-Size: 613 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: mesa Version: 18.3.6-2+deb10u1 Provides: libglx-vendor Depends: libc6 (>= 2.28), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libglapi-mesa (= 18.3.6-2+deb10u1), libx11-6 (>= 2:1.4.99.1), libx11-xcb1, libxcb-dri2-0 (>= 1.8), libxcb-dri3-0 (>= 1.13), libxcb-glx0 (>= 1.8), libxcb-present0, libxcb-sync1, libxcb1 (>= 1.9.2), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxshmfence1, libxxf86vm1, libgl1-mesa-dri Breaks: glx-diversions (<< 0.8.4~), libopengl-perl (<< 0.6704+dfsg-2) Description: free implementation of the OpenGL API -- GLX vendor library Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL. To the extent that Mesa utilizes the OpenGL command syntax or state machine, it is being used with authorization from Silicon Graphics, Inc. However, the authors make no claim that Mesa is in any way a compatible replacement for OpenGL or associated with Silicon Graphics, Inc. . This version of Mesa provides GLX and DRI capabilities: it is capable of both direct and indirect rendering. For direct rendering, it can use DRI modules from the libgl1-mesa-dri package to accelerate drawing. . This package does not include the modules themselves: these can be found in the libgl1-mesa-dri package. Homepage: https://mesa3d.org/ Package: libglx0 Status: install ok installed Priority: optional Section: libs Installed-Size: 94 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libglvnd Version: 1.1.0-1 Replaces: libgl1-mesa-glx (<< 17.2.0~rc4-1), libglvnd0 (<< 0.2.999+git20170201-1) Depends: libc6 (>= 2.17), libglvnd0 (= 1.1.0-1), libx11-6 (>= 2:1.4.99.1), libxext6, libglx-mesa0 Breaks: libgl1-mesa-glx (<< 17.2.0~rc4-1), libglvnd0 (<< 0.2.999+git20170201-1) Description: Vendor neutral GL dispatch library -- GLX support This is an implementation of the vendor-neutral dispatch layer for arbitrating OpenGL API calls between multiple vendors on a per-screen basis. . This package contains support for GLX. Homepage: https://github.com/NVIDIA/libglvnd Package: libgme0 Status: install ok installed Priority: optional Section: libs Installed-Size: 298 Maintainer: Sebastian Dröge Architecture: arm64 Multi-Arch: same Source: game-music-emu Version: 0.6.2-1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5), zlib1g (>= 1:1.1.4) Description: Playback library for video game music files - shared library game-music-emu is a collection of video game music file emulators that support the following formats and systems: * AY ZX Spectrum/Amstrad CPC * GBS Nintendo Game Boy * GYM Sega Genesis/Mega Drive * HES NEC TurboGrafx-16/PC Engine * KSS MSX Home Computer/other Z80 systems (doesn't support FM sound) * NSF/NSFE Nintendo NES/Famicom (with VRC 6, Namco 106, and FME-7 sound) * SAP Atari systems using POKEY sound chip * SPC Super Nintendo/Super Famicom * VGM/VGZ Sega Master System/Mark III, Sega Genesis/Mega Drive,BBC Micro . This package contains the shared libraries necessary to run programs using libgme. Homepage: https://bitbucket.org/mpyne/game-music-emu/wiki/Home Package: libgmp10 Status: install ok installed Priority: optional Section: libs Installed-Size: 525 Maintainer: Debian Science Team Architecture: arm64 Multi-Arch: same Source: gmp Version: 2:6.1.2+dfsg-4+deb10u1 Depends: libc6 (>= 2.17) Description: Multiprecision arithmetic library GNU MP is a programmer's library for arbitrary precision arithmetic (ie, a bignum package). It can operate on signed integer, rational, and floating point numeric types. . It has a rich set of functions, and the functions have a regular interface. Homepage: http://gmplib.org/ Package: libgnutls30 Status: hold ok installed Priority: optional Section: libs Installed-Size: 2745 Maintainer: Debian GnuTLS Maintainers Architecture: arm64 Multi-Arch: same Source: gnutls28 Version: 3.6.7-4+deb10u9 Depends: libgmp10 (>= 2:6.0.0), libc6 (>= 2.25), libhogweed4 (>= 3.4.1~rc1~), libidn2-0 (>= 2.0.0), libnettle6 (>= 3.4~), libp11-kit0 (>= 0.23.11), libtasn1-6 (>= 4.12), libunistring2 (>= 0.9.7) Suggests: gnutls-bin Description: GNU TLS library - main runtime library GnuTLS is a portable library which implements the Transport Layer Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram Transport Layer Security (DTLS 1.0, 1.2) protocols. . GnuTLS features support for: - certificate path validation, as well as DANE and trust on first use. - the Online Certificate Status Protocol (OCSP). - public key methods, including RSA and Elliptic curves, as well as password and key authentication methods such as SRP and PSK protocols. - all the strong encryption algorithms, including AES and Camellia. - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets. - HSMs and cryptographic tokens, via PKCS #11. . This package contains the main runtime library. Homepage: https://www.gnutls.org/ Package: libgomp1 Status: install ok installed Priority: optional Section: libs Installed-Size: 199 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: same Source: gcc-8 Version: 8.3.0-6 Depends: gcc-8-base (= 8.3.0-6), libc6 (>= 2.17) Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Description: GCC OpenMP (GOMP) support library GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers in the GNU Compiler Collection. Homepage: http://gcc.gnu.org/ Package: libgpg-error0 Status: install ok installed Priority: optional Section: libs Installed-Size: 167 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Multi-Arch: same Source: libgpg-error Version: 1.35-1 Depends: libc6 (>= 2.17) Recommends: libgpg-error-l10n Description: GnuPG development runtime library Library that defines common error values, messages, and common runtime functionality for all GnuPG components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and possibly more in the future. . It will likely be renamed "gpgrt" in the future. Homepage: https://www.gnupg.org/related_software/libgpg-error/ Package: libgpm2 Status: install ok installed Priority: optional Section: libs Installed-Size: 64 Maintainer: Axel Beckert Architecture: arm64 Multi-Arch: same Source: gpm Version: 1.20.7-5 Depends: libc6 (>= 2.17) Suggests: gpm Description: General Purpose Mouse - shared library This package provides a library that handles mouse requests and delivers them to applications. See the description for the 'gpm' package for more information. Homepage: https://nico.schottelius.org/software/gpm/ Package: libgraphene-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 264 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: graphene Version: 1.8.4-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.14.0) Description: library of graphic data types Graphene provides a small set of mathematical types needed to implement graphic libraries that deal with 2D and 3D transformations and projections. . This library provides types and their relative API; it does not deal with windowing system surfaces, drawing, scene graphs, or input. Homepage: https://ebassi.github.io/graphene/ Package: libgraphite2-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 170 Maintainer: Debian LibreOffice Maintainers Architecture: arm64 Multi-Arch: same Source: graphite2 Version: 1.3.13-7 Replaces: libgraphite2-2.0.0 Provides: libgraphite2-2.0.0 Depends: libc6 (>= 2.17) Breaks: libgraphite2-2.0.0 (<< 1.2.0) Description: Font rendering engine for Complex Scripts -- library Graphite is a system that can be used to create and use "smart fonts" capable of displaying writing systems with various complex behaviors, such as: contextual shaping, ligatures, reordering, split glyphs, bidirectionality, stacking diacritics and complex positioning. . This library was designed and developed by the NRSI (Non-Roman Script Initiative) within SIL International (www.sil.org) to act as a complement to other smart font rendering technologies with limited practical local extensibility. Its purpose is to help meet the needs of a very large number of "minority language" communities for local extensibility of complex script behaviors. . The behavior of the rendering engine for a given writing system is specified through extra tables added to a TrueType font. These tables are generated by compiling a GDL (Graphite Description Language) source file into a font using grcompiler. . This package contains the shared library. Homepage: http://graphite.sil.org/ Package: libgsasl7 Status: install ok installed Priority: optional Section: libs Installed-Size: 615 Maintainer: Debian XMPP Maintainers Architecture: arm64 Source: gsasl Version: 1.8.0-8+deb10u1 Replaces: libgsasl1 Depends: libc6 (>= 2.17), libcom-err2 (>= 1.43.9), libgssapi-krb5-2 (>= 1.17), libidn11 (>= 1.13), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libntlm0 (>= 1.2) Conflicts: libgsasl1 Description: GNU SASL library GNU SASL is an implementation of the Simple Authentication and Security Layer framework and a few common SASL mechanisms. SASL is used by network servers (e.g., IMAP, SMTP) to request authentication from clients, and in clients to authenticate against servers. . Supported mechanisms are ANONYMOUS, EXTERNAL, LOGIN, PLAIN, SECURID, NTLM, DIGEST-MD5, CRAM-MD5, SCRAM-SHA-1, SCRAM-SHA-1-PLUS, GS2-KRB5, GSSAPI. . This package includes the GNU SASL shared library that is required by applications using GNU SASL. You normally don't need to install it manually. Homepage: http://www.gnu.org/software/gsasl/ Package: libgsm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 70 Maintainer: Felix Lechner Architecture: arm64 Multi-Arch: same Source: libgsm Version: 1.0.18-2 Depends: libc6 (>= 2.17) Conflicts: libgsm-dev Description: Shared libraries for GSM speech compressor This package contains runtime shared libraries for libgsm, an implementation of the European GSM 06.10 provisional standard for full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse excitation/long term prediction) coding at 13 kbit/s. . GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling rate, i.e. a frame rate of 50 Hz) into 260 bits; for compatibility with typical UNIX applications, this implementation turns frames of 160 16-bit linear samples into 33-byte frames (1650 Bytes/s). The quality of the algorithm is good enough for reliable speaker recognition; even music often survives transcoding in recognizable form (given the bandwidth limitations of 8 kHz sampling rate). . The interfaces offered are a front end modelled after compress(1), and a library API. Compression and decompression run faster than realtime on most SPARCstations. The implementation has been verified against the ETSI standard test patterns. Homepage: http://www.quut.com/gsm/ Package: libgssapi-krb5-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 416 Maintainer: Sam Hartman Architecture: arm64 Multi-Arch: same Source: krb5 Version: 1.17-3+deb10u6 Depends: libc6 (>= 2.27), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.16), libkeyutils1 (>= 1.4), libkrb5-3 (= 1.17-3+deb10u6), libkrb5support0 (>= 1.15~beta1) Suggests: krb5-doc, krb5-user Breaks: moonshot-gss-eap (<= 1.0) Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime library for the MIT Kerberos implementation of GSS-API used by applications and Kerberos clients. Homepage: http://web.mit.edu/kerberos/ Package: libgssdp-1.0-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 93 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gssdp Version: 1.0.5-0+deb10u1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), libsoup2.4-1 (>= 2.26.1) Description: GObject-based library for SSDP A GObject-based API for doing SSDP (Simple Service Discovery Protocol) transparently. Homepage: https://wiki.gnome.org/Projects/GUPnP Package: libgstreamer-gl1.0-0 Status: hold ok installed Priority: optional Section: libs Installed-Size: 1664 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u1 Replaces: libgstreamer-plugins-bad1.0-0 (<< 1.13.1) Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.17), libegl1, libgbm1 (>= 8.1~0), libgl1, libglib2.0-0 (>= 2.40), libgstreamer-plugins-base1.0-0 (>= 1.8.0), libgstreamer1.0-0 (>= 1.14.4), libgudev-1.0-0 (>= 165), libwayland-client0 (>= 1.9.91), libwayland-egl1 (>= 1.15.0), libx11-6, libx11-xcb1, libxcb1 Recommends: gstreamer1.0-gl Breaks: libgstreamer-plugins-bad1.0-0 (<< 1.13.1) Description: GStreamer GL libraries GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the GL library. Homepage: https://gstreamer.freedesktop.org Package: libgstreamer-opencv1.0-0 Status: install ok installed Priority: extra Section: libs Installed-Size: 1697 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-bad1.0 Version: 1.14.4-1+deb10u5 Replaces: libgstreamer-plugins-bad1.0-0 (<< 1.13.1) Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.40), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4), libopencv-core3.2 Conflicts: libgstreamer-plugins-bad1.0-0 (<< 1.13.1) Description: GStreamer OpenCV libraries GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared to the rest. They might be close to being good quality, but they're missing something - be it a good code review, some documentation, a set of tests, a real live maintainer, or some actual wide use. . This package contains shared GStreamer libraries for OpenCV. Homepage: https://gstreamer.freedesktop.org Package: libgstreamer-plugins-bad1.0-0 Status: hold ok installed Priority: extra Section: libs Installed-Size: 2646 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-bad1.0 Version: 1.14.4-1+deb10u2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.40), libgstreamer-plugins-base1.0-0 (>= 1.14.4), libgstreamer1.0-0 (>= 1.14.4) Description: GStreamer libraries from the "bad" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared to the rest. They might be close to being good quality, but they're missing something - be it a good code review, some documentation, a set of tests, a real live maintainer, or some actual wide use. . This package contains shared GStreamer libraries from the "bad" set. The API is not guaranteed to be stable. Homepage: https://gstreamer.freedesktop.org Package: libgstreamer-plugins-base1.0-0 Status: hold ok installed Priority: optional Section: libs Installed-Size: 3972 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gst-plugins-base1.0 Version: 1.14.4-2+deb10u1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.40), libgstreamer1.0-0 (>= 1.14.4), liborc-0.4-0 (>= 1:0.4.25), librga2, zlib1g (>= 1:1.1.4), iso-codes Recommends: gstreamer1.0-plugins-base Suggests: libvisual-0.4-plugins Breaks: gstreamer1.0-plugins-bad (<< 1.7.1), libgstreamer-plugins-bad1.0-0 (<< 1.13.1), totem-gstreamer (<= 2.17.92-0ubuntu1) Conflicts: libgstreamer-plugins-bad1.0-0 (<< 1.13.1) Description: GStreamer libraries from the "base" set GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains libraries from the "base" set, an essential exemplary set of elements. Homepage: https://gstreamer.freedesktop.org Package: libgstreamer1.0-0 Status: hold ok installed Priority: optional Section: libs Installed-Size: 5028 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gstreamer1.0 Version: 1.14.4-1 Depends: libc6 (>= 2.17), libcap2 (>= 1:2.10), libglib2.0-0 (>= 2.41.1), libunwind8, libcap2-bin Suggests: gstreamer1.0-tools Breaks: gstreamer1.0-plugins-bad (<< 1.11.1), gstreamer1.0-plugins-base (<< 1.8.0), libgstreamer-plugins-bad1.0-0 (<< 1.13.1) Description: Core GStreamer libraries and elements GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the core library and elements. Homepage: https://gstreamer.freedesktop.org Package: libgstreamer1.0-0-dbg Status: hold ok installed Priority: extra Section: debug Installed-Size: 4803 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: gstreamer1.0 Version: 1.14.4-1 Depends: libgstreamer1.0-0 (= 1.14.4-1) Description: Core GStreamer libraries and elements GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains unstripped shared libraries. It is provided primarily to provide a backtrace with names in a debugger, this makes it somewhat easier to interpret core dumps. The libraries are installed in /usr/lib/debug and are automatically used by gdb. Homepage: https://gstreamer.freedesktop.org Build-Ids: 024ec1c86a6f12deb7de668a2b64afda9c9214d3 0c333d6aad62b492bf4efb2089d8b1be5b33ed12 1371c7932e59b5a93a0176f7ff14f1ec4c02be0e 32e8d097d89d1977cf60296fdfd77d1b7a56ec13 35042c84301cf71c9f019ed2085820e130641217 91a1ec6a66d2a98c74b71ad6599f5cc84fd409fc 969853eed27495d4188eba640e64bd261adfead6 e9f743d60ddba28e7b77dc8782e23a63dfc75311 f1d2519aa6eadce0bc34bf01bbf38171204e1ec1 60d9d7d527230ffd7e91e0441e59452709eeee62 59dba7868c4261a56f58106000043fc83366e9c5 886a584a27f0ed8fb5f00a136c3d5801e654de7a ea56046b1fb9cc3a0ac2a959be07c0457bda9a39 Package: libgtk-3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 9096 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gtk+3.0 Version: 3.24.5-1 Provides: gtk3-binver-3.0.0 Depends: adwaita-icon-theme, hicolor-icon-theme, shared-mime-info, libatk-bridge2.0-0 (>= 2.5.3), libatk1.0-0 (>= 2.15.1), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.14.0), libcolord2 (>= 0.1.10), libcups2 (>= 1.6.0), libepoxy0 (>= 1.4.3), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.30.1), libglib2.0-0 (>= 2.55.2), libharfbuzz0b (>= 1.2.6), libjson-glib-1.0-0 (>= 0.12.0), libpango-1.0-0 (>= 1.42.0), libpangocairo-1.0-0 (>= 1.41.0), libpangoft2-1.0-0 (>= 1.41.0), librest-0.7-0 (>= 0.7), libsoup2.4-1 (>= 2.4.0), libwayland-client0 (>= 1.9.91), libwayland-cursor0 (>= 1.9.91), libwayland-egl1 (>= 1.15.0), libx11-6 (>= 2:1.4.99.1), libxcomposite1 (>= 1:0.3-1), libxcursor1 (>> 1.1.2), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxi6 (>= 2:1.2.99.4), libxinerama1, libxkbcommon0 (>= 0.5.0), libxml2 (>= 2.6.27), libxrandr2 (>= 2:1.5.0), libgtk-3-common (>= 3.24.5-1) Recommends: libgtk-3-bin Suggests: gvfs, librsvg2-common Description: GTK+ graphical user interface library GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the shared libraries. Homepage: https://www.gtk.org/ Package: libgtk-3-common Status: install ok installed Priority: optional Section: misc Installed-Size: 24939 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: gtk+3.0 Version: 3.24.5-1 Depends: dconf-gsettings-backend | gsettings-backend Recommends: libgtk-3-0 Conffiles: /etc/gtk-3.0/im-multipress.conf c358838e1789c1d4e6da7f525fc922cf Description: common files for the GTK+ graphical user interface library GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the common files which the libraries need. Homepage: https://www.gtk.org/ Package: libgtk2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 5820 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gtk+2.0 Version: 2.24.32-3 Provides: gtk2.0-binver-2.10.0 Depends: libgtk2.0-common, libatk1.0-0 (>= 1.32.0), libc6 (>= 2.17), libcairo2 (>= 1.6.4-6.1), libcups2 (>= 1.6.0), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.41.1), libpango-1.0-0 (>= 1.28.3), libpangocairo-1.0-0 (>= 1.28.3), libpangoft2-1.0-0 (>= 1.28.3), libx11-6 (>= 2:1.4.99.1), libxcomposite1 (>= 1:0.3-1), libxcursor1 (>> 1.1.2), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxi6, libxinerama1, libxrandr2 (>= 2:1.5.0), libxrender1, adwaita-icon-theme | gnome-icon-theme, hicolor-icon-theme, shared-mime-info Recommends: libgail-common, libgtk2.0-bin Suggests: librsvg2-common, gvfs Description: GTK+ graphical user interface library GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the shared libraries. Homepage: http://www.gtk.org/ Package: libgtk2.0-common Status: install ok installed Priority: optional Section: misc Installed-Size: 19930 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: gtk+2.0 Version: 2.24.32-3 Recommends: libgtk2.0-0 Conffiles: /etc/gtk-2.0/im-multipress.conf c358838e1789c1d4e6da7f525fc922cf Description: common files for the GTK+ graphical user interface library GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the common files which the libraries need. Homepage: http://www.gtk.org/ Package: libgtkmm-3.0-1v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 6360 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gtkmm3.0 Version: 3.24.0-2 Replaces: libgtkmm-3.0-1 Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.17), libcairomm-1.0-1v5 (>= 1.12.0), libgcc1 (>= 1:3.0), libgdk-pixbuf2.0-0 (>= 2.35.5), libglib2.0-0 (>= 2.41.1), libglibmm-2.4-1v5 (>= 2.54.0), libgtk-3-0 (>= 3.22.0), libpangomm-1.4-1v5 (>= 2.40.0), libsigc++-2.0-0v5 (>= 2.6.1), libstdc++6 (>= 5.2) Conflicts: libgtkmm-3.0-1 Description: C++ wrappers for GTK+ (shared libraries) Gtkmm is a C++ interface for the popular GUI library GTK+, API version 3.0. Gtkmm provides a convenient interface for C++ programmers to create graphical user interfaces with GTK+'s flexible OO framework. Highlights include type safe callbacks, widgets extensible using inheritance and over 180 classes that can be freely combined to quickly create complex user interfaces. . This package contains shared libraries. Homepage: http://www.gtkmm.org/ Package: libgudev-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 56 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libgudev Version: 232-2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), libudev1 (>= 199) Description: GObject-based wrapper library for libudev This library makes it much simpler to use libudev from programs already using GObject. It also makes it possible to easily use libudev from other programming languages, such as Javascript, because of GObject introspection support. Homepage: https://wiki.gnome.org/Projects/libgudev Package: libgupnp-1.0-4 Status: install ok installed Priority: optional Section: libs Installed-Size: 263 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gupnp Version: 1.0.5-0+deb10u1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.39.90), libgssdp-1.0-3 (>= 1.0.5), libsoup2.4-1 (>= 2.48.0), libuuid1 (>= 2.16), libxml2 (>= 2.7.4), shared-mime-info Description: GObject-based library for UPnP A GObject-based API for doing UPnP transparently. Homepage: https://wiki.gnome.org/Projects/GUPnP Package: libgupnp-igd-1.0-4 Status: install ok installed Priority: optional Section: libs Installed-Size: 62 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: gupnp-igd Version: 0.2.5-3 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.31.8), libgssdp-1.0-3 (>= 0.12.0), libgupnp-1.0-4 (>= 0.18.0) Description: library to handle UPnP IGD port mapping A GObject-based API for controlling UPnP Internet Gateway Devices port mapping. Homepage: https://wiki.gnome.org/Projects/GUPnP Package: libharfbuzz-icu0 Status: install ok installed Priority: optional Section: libs Installed-Size: 834 Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) Architecture: arm64 Multi-Arch: same Source: harfbuzz Version: 2.3.1-1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libharfbuzz0b (>= 0.9.4), libicu63 (>= 63.1-1~), libstdc++6 (>= 4.1.1) Description: OpenType text shaping engine ICU backend HarfBuzz is an implementation of the OpenType Layout engine (aka layout engine) and the script-specific logic (aka shaping engine). . This package contains the ICU backend. Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz Package: libharfbuzz0b Status: install ok installed Priority: optional Section: libs Installed-Size: 1780 Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) Architecture: arm64 Multi-Arch: same Source: harfbuzz Version: 2.3.1-1 Replaces: libharfbuzz0, libharfbuzz0a Depends: libc6 (>= 2.17), libfreetype6 (>= 2.9.1), libglib2.0-0 (>= 2.31.8), libgraphite2-3 (>= 1.2.2) Conflicts: libharfbuzz0, libharfbuzz0a Description: OpenType text shaping engine (shared library) HarfBuzz is an implementation of the OpenType Layout engine (aka layout engine) and the script-specific logic (aka shaping engine). . This package contains the shared libraries. Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz Package: libhogweed4 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Magnus Holmgren Architecture: arm64 Multi-Arch: same Source: nettle Version: 3.4.1-1+deb10u1 Depends: libc6 (>= 2.17), libgmp10 (>= 2:6.0.0), libnettle6 (= 3.4.1-1+deb10u1) Description: low level cryptographic library (public-key cryptos) Nettle is a cryptographic library that is designed to fit easily in more or less any context: In crypto toolkits for object-oriented languages (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel space. . It tries to solve a problem of providing a common set of cryptographic algorithms for higher-level applications by implementing a context-independent set of cryptographic algorithms. In that light, Nettle doesn't do any memory allocation or I/O, it simply provides the cryptographic algorithms for the application to use in any environment and in any way it needs. . This package contains the asymmetric cryptographic algorithms, which, require the GNU multiple precision arithmetic library (libgmp) for their large integer computations. Homepage: http://www.lysator.liu.se/~nisse/nettle/ Package: libhtml-parser-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 230 Maintainer: Debian Perl Group Architecture: arm64 Source: libhtml-parser-perl (3.72-3) Version: 3.72-3+b3 Depends: perl (>= 5.28.0-3), perlapi-5.28.0, libc6 (>= 2.17), libhtml-tagset-perl, liburi-perl Recommends: libhttp-message-perl Suggests: libdata-dump-perl Enhances: libwww-perl Description: collection of modules that parse HTML text documents HTML::Parser is a collection of modules useful for handling HTML documents. These modules used to be part of the libwww-perl distribution, but are now unbundled in order to facilitate a separate development track. . Objects of the HTML::Parser class will recognize markup and separate it from content data. As different kinds of markup are recognized, the corresponding event handler is invoked. The document to be parsed may also be supplied in arbitrary chunks, making on-the-fly parsing of network documents possible. Homepage: https://metacpan.org/release/HTML-Parser Package: libhtml-tagset-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 32 Maintainer: Debian Perl Group Architecture: all Version: 3.20-3 Depends: perl Description: Data tables pertaining to HTML HTML-Tagset contains data tables useful in dealing with HTML. For instance, it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements which cannot have content. It provides no functions or methods. Homepage: https://metacpan.org/release/HTML-Tagset Package: libhtml-tree-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 493 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 5.07-2 Depends: perl, libhtml-parser-perl, libhtml-tagset-perl Recommends: libhtml-format-perl, libwww-perl Description: Perl module to represent and create HTML syntax trees HTML::Tree is a collection of modules that represent, create and extract information from HTML syntax trees. These modules used to be part of the libwww-perl distribution, but are now unbundled in order to facilitate a separate development track. Homepage: https://metacpan.org/release/HTML-Tree Package: libhttp-cookies-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 48 Maintainer: Debian Perl Group Architecture: all Version: 6.04-1 Replaces: libwww-perl (<< 6.00) Depends: perl, libhttp-date-perl, libhttp-message-perl Breaks: libwww-perl (<< 6.00) Description: HTTP cookie jars This class is for objects that represent a "cookie jar" -- that is, a database of all the HTTP cookies that a given LWP::UserAgent object knows about. . Cookies are a general mechanism which server side connections can use to both store and retrieve information on the client side of the connection. For more information about cookies refer to and . HTTP::Cookies also implements the new style cookies described in RFC 2965. The two variants of cookies are supposed to be able to coexist happily. . Instances of the class HTTP::Cookies are able to store a collection of Set-Cookie2: and Set-Cookie: headers and are able to use this information to initialize Cookie-headers in HTTP::Request objects. The state of a HTTP::Cookies object can be saved in and restored from files. Homepage: https://metacpan.org/release/HTTP-Cookies Package: libhttp-date-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 56 Maintainer: Debian Perl Group Architecture: all Version: 6.02-1 Replaces: libwww-perl (<< 6.00) Depends: perl, libtimedate-perl Breaks: libwww-perl (<< 6.00) Description: module of date conversion routines HTTP::Date provides functions that deal the date formats used by the HTTP protocol (and then some more). Only the first two functions, time2str() and str2time(), are exported by default. Homepage: http://search.cpan.org/dist/HTTP-Date/ Package: libhttp-message-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 194 Maintainer: Debian Perl Group Architecture: all Version: 6.18-1 Depends: perl, libencode-locale-perl, libhttp-date-perl, libio-html-perl, liblwp-mediatypes-perl, liburi-perl Description: perl interface to HTTP style messages The HTTP::Message distribution contains classes useful for representing the messages passed in HTTP style communication. These are classes representing requests, responses and the headers contained within them. . The HTTP::Headers class encapsulates HTTP-style message headers. The headers consist of attribute-value pairs also called fields, which may be repeated, and which are printed in a particular order. The field names are cases insensitive. . Instances of this class are usually created as member variables of the HTTP::Request and HTTP::Response classes, internal to the library. Homepage: https://metacpan.org/release/HTTP-Message Package: libhttp-negotiate-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 35 Maintainer: Debian Perl Group Architecture: all Version: 6.01-1 Replaces: libwww-perl (<< 6.00) Depends: perl, libhttp-message-perl Breaks: libwww-perl (<< 6.00) Description: implementation of content negotiation HTTP::Negotiate provides a complete implementation of the HTTP content negotiation algorithm. Content negotiation allows for the selection of a preferred content representation based upon attributes of the negotiable variants and the value of the various Accept* header fields in the request. Homepage: https://metacpan.org/release/HTTP-Negotiate Package: libhunspell-1.7-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 489 Maintainer: Debian LibreOffice Maintainers Architecture: arm64 Multi-Arch: same Source: hunspell Version: 1.7.0-2 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), libtinfo6 (>= 6) Recommends: hunspell-en-us | hunspell-dictionary | myspell-dictionary Conflicts: openoffice.org-core (= 2.2.0~rc2-1) Description: spell checker and morphological analyzer (shared library) Hunspell is a spell checker and morphological analyzer library and program designed for languages with rich morphology and complex word compounding or character encoding. It is based on MySpell and features an Ispell-like terminal interface using Curses library, an Ispell pipe interface and an OpenOffice.org UNO module. . Main features: - Unicode support (first 65535 Unicode characters) - morphological analysis (in custom item and arrangement style) - Max. 65535 affix classes and twofold affix stripping (for agglutinative languages, like Azeri, Basque, Estonian, Finnish, Hungarian, Turkish, etc.) - Support complex compoundings (for example, Hungarian and German) - Support language specific algorithms (for example, handling Azeri and Turkish dotted i, or German sharp s) - Handling conditional affixes, circumfixes, fogemorphemes, forbidden words, pseudoroots and homonyms. . This package contains the shared library. Homepage: http://hunspell.github.io/ Package: libhyphen0 Status: install ok installed Priority: optional Section: libs Installed-Size: 77 Maintainer: Debian LibreOffice Maintainers Architecture: arm64 Multi-Arch: same Source: hyphen Version: 2.8.8-7 Depends: libc6 (>= 2.17) Description: ALTLinux hyphenation library - shared library ALTLinuxhyph is a modified version of libhnj which is a high quality hyphenation and justification library based on the TeX hyphenation algorithm. The TeX hyphenation patterns could be used after a preprocessing step. . It is used in OpenOffice.org . This package contains the shared library. Homepage: https://github.com/hunspell/hyphen Package: libi2c0 Status: install ok installed Priority: optional Section: libs Installed-Size: 30 Maintainer: Aurelien Jarno Architecture: arm64 Multi-Arch: same Source: i2c-tools Version: 4.1-1 Depends: libc6 (>= 2.17) Description: userspace I2C programming library I2C devices are usually controlled by a kernel driver. Using this library it is also possible to access all devices on an adapter from userspace and without the knowledge of Linux kernel internals. . This package contains what you need to run programs that use this library. Homepage: https://www.kernel.org/pub/software/utils/i2c-tools/ Package: libical3 Status: install ok installed Priority: optional Section: libs Installed-Size: 1372 Maintainer: Nicolas Mora Architecture: arm64 Multi-Arch: same Version: 3.0.4-3 Depends: tzdata, libc6 (>= 2.17), libdb5.3, libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.41.1), libicu63 (>= 63.1-1~), libstdc++6 (>= 5.2) Description: iCalendar library implementation in C (runtime) libical is an open source implementation of the IETF's iCalendar calendaring and scheduling protocols (RFC 2445, 2446, and 2447). It parses iCal components and provides a C API for manipulating the component properties, parameters, and subcomponents. . This package contains the files necessary for running applications that use the libical library. Homepage: https://github.com/libical/libical Package: libice6 Status: install ok installed Priority: optional Section: libs Installed-Size: 125 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libice Version: 2:1.0.9-2 Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.17), x11-common Description: X11 Inter-Client Exchange library This package provides the main interface to the X11 Inter-Client Exchange library, which allows for communication of data between X clients. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libICE Package: libicu63 Status: install ok installed Priority: optional Section: libs Installed-Size: 31573 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Multi-Arch: same Source: icu Version: 63.1-6+deb10u3 Replaces: libiculx63 (<< 63.1-5) Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~) Description: International Components for Unicode ICU is a C++ and C library that provides robust and full-featured Unicode and locale support. This package contains the runtime libraries for ICU. Homepage: http://www.icu-project.org Package: libid3tag0 Status: install ok installed Priority: optional Section: libs Installed-Size: 141 Maintainer: Kurt Roeckx Architecture: arm64 Multi-Arch: same Source: libid3tag Version: 0.15.1b-14 Depends: libc6 (>= 2.17), zlib1g (>= 1:1.1.4) Description: ID3 tag reading library from the MAD project ID3 tag manipulation library with full support for reading ID3v1, ID3v1.1, ID3v2.2, ID3v2.3, and ID3v2.4 tags, as well as support for writing ID3v1, ID3v1.1, and ID3v2.4 tags. Package: libidn11 Status: install ok installed Priority: optional Section: libs Installed-Size: 302 Maintainer: Debian Libidn Team Architecture: arm64 Multi-Arch: same Source: libidn Version: 1.33-2.2 Replaces: libidn11-dev Depends: libc6 (>= 2.17) Conflicts: libidn9-dev Description: GNU Libidn library, implementation of IETF IDN specifications GNU Libidn is a fully documented implementation of the Stringprep, Punycode and IDNA specifications. Libidn's purpose is to encode and decode internationalized domain names. The Nameprep, XMPP, SASLprep, and iSCSI profiles are supported. . This package contains the shared library. Homepage: https://www.gnu.org/software/libidn/ Package: libidn2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 276 Maintainer: Debian Libidn team Architecture: arm64 Multi-Arch: same Source: libidn2 Version: 2.0.5-1+deb10u1 Depends: libc6 (>= 2.17), libunistring2 (>= 0.9.7) Description: Internationalized domain names (IDNA2008/TR46) library Libidn2 implements the revised algorithm for internationalized domain names called IDNA2008/TR46. . This package contains runtime libraries. Homepage: https://www.gnu.org/software/libidn/#libidn2 Package: libiec61883-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 81 Maintainer: Debian QA Group Architecture: arm64 Multi-Arch: same Source: libiec61883 Version: 1.2.0-3 Depends: libc6 (>= 2.17), libraw1394-11 Description: partial implementation of IEC 61883 (shared lib) Implementation of IEC 61883, part 1 (CIP, plug registers, and CMP), part 2 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of IIDC, nearly all FireWire multimedia devices use IEC 61883 protocols. . The libiec61883 library provides a higher level API for streaming DV, MPEG-2 and audio over Linux IEEE 1394. This includes both reception and transmission. It uses the new "rawiso" API of libraw1394, which transparently provides mmap-ed DMA for efficient data transfer. It also represents the third generation of I/O technology for Linux 1394 for these media types thereby removing the complexities of additional kernel modules, /dev nodes, and procfs. It also consolidates features for plug control registers and connection management that previously existed in experimental form in an unreleased version of libavc1394. Homepage: https://ieee1394.wiki.kernel.org/index.php/Main_Page Package: libilmbase23 Status: install ok installed Priority: optional Section: libs Installed-Size: 522 Maintainer: Debian PhotoTools Maintainers Architecture: arm64 Multi-Arch: same Source: ilmbase Version: 2.2.1-2 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Description: several utility libraries from ILM used by OpenEXR IlmBase are a set of utility libraries released by ILM, and used in their OpenEXR implementation. Included in this package you can find: . * libHalf: a class (Half) for manipulating "half" values (16-bit floating point format) as if they were a built-in C++ data type. . * libIlmThread: a thread abstraction library on top of pthreads. . * libImath: a math library with support for matrices, 2d- and 3d-transformations, solvers for linear/quadratic/cubic equations, and more. . * libIex: an exception handling library. Homepage: http://www.openexr.com Package: libimlib2 Status: install ok installed Priority: optional Section: libs Installed-Size: 518 Maintainer: Markus Koschany Architecture: arm64 Multi-Arch: same Source: imlib2 Version: 1.5.1-1 Depends: libbz2-1.0, libc6 (>= 2.17), libfreetype6 (>= 2.2.1), libgif7 (>= 5.1), libid3tag0 (>= 0.15.1b), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libx11-6, libx11-xcb1, libxcb-shm0 (>= 1.10), libxcb1, libxext6, zlib1g (>= 1:1.1.4) Description: image loading, rendering, saving library Imlib2 is a library that does image file loading and saving as well as rendering, manipulation, arbitrary polygon support, etc. . It does ALL of these operations FAST. Imlib2 also tries to be highly intelligent about doing them, so writing naive programs can be done easily, without sacrificing speed. Homepage: https://docs.enlightenment.org/api/imlib2/html/index.html Package: libimobiledevice6 Status: install ok installed Priority: optional Section: libs Installed-Size: 193 Maintainer: gtkpod Maintainers Architecture: arm64 Multi-Arch: same Source: libimobiledevice Version: 1.2.1~git20181030.92c5462-2+deb10u1 Replaces: libimobiledevice0, libimobiledevice1, libiphone0 Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libgnutls30 (>= 3.6.6), libplist3 (>= 1.11), libtasn1-6 (>= 4.5), libusbmuxd4 (>= 1.1.0~git20181007.07a493a) Recommends: usbmuxd Suggests: libusbmuxd-tools Conflicts: libiphone0 Description: Library for communicating with iPhone and other Apple devices libimobiledevice is a library that talks the native Apple USB protocols that the iPhone, iPad and iPod Touch use. Unlike other projects, libimobiledevice does not depend on using any existing libraries from Apple. Homepage: https://www.libimobiledevice.org/ Package: libindicator3-7 Status: install ok installed Priority: optional Section: libs Installed-Size: 106 Maintainer: Debian QA Group Architecture: arm64 Multi-Arch: same Source: libindicator Version: 0.5.0-4 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.0.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0) Description: panel indicator applet - shared library This library contains information to build indicators to go into the indicator applet. . This package contains the library itself. Homepage: https://launchpad.net/libindicator Package: libinput-bin Status: install ok installed Priority: optional Section: libs Installed-Size: 78 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: foreign Source: libinput Version: 1.12.6-2+deb10u1 Depends: libc6 (>= 2.17), libevdev2 (>= 0.9.1), libudev1 (>= 183), libwacom2 (>= 0.22) Description: input device management and event handling library - udev quirks libinput is a library that handles input devices for display servers and other applications that need to directly deal with input devices. . It provides device detection, device handling, input device event processing and abstraction to minimize the amount of custom input code the user of libinput needs to provide the common set of functionality that users expect. . This package includes the udev quirks database and helpers. Homepage: http://www.freedesktop.org/wiki/Software/libinput/ Package: libinput10 Status: install ok installed Priority: optional Section: libs Installed-Size: 291 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libinput Version: 1.12.6-2+deb10u1 Depends: libc6 (>= 2.17), libevdev2 (>= 1.3), libmtdev1 (>= 1.1.0), libudev1 (>= 183), libwacom2 (>= 0.29), libinput-bin (>= 1.12.6-2+deb10u1) Description: input device management and event handling library - shared library libinput is a library that handles input devices for display servers and other applications that need to directly deal with input devices. . It provides device detection, device handling, input device event processing and abstraction to minimize the amount of custom input code the user of libinput needs to provide the common set of functionality that users expect. . This package includes the shared library. Homepage: http://www.freedesktop.org/wiki/Software/libinput/ Package: libio-html-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 40 Maintainer: Debian Perl Group Architecture: all Version: 1.001-1 Depends: perl Description: open an HTML file with automatic charset detection IO::HTML provides an easy way to open a file containing HTML while automatically determining its encoding. It uses the HTML5 encoding sniffing algorithm specified in section 8.2.2.1 of the draft standard. Homepage: http://search.cpan.org/dist/IO-HTML/ Package: libio-socket-ssl-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 535 Maintainer: Debian Perl Group Architecture: all Version: 2.060-3 Depends: libnet-ssleay-perl (>= 1.85-2~), libssl1.1 (>= 1.1.1), netbase, perl Recommends: libnet-libidn-perl | libnet-idn-encode-perl | liburi-perl, perl (>= 5.15.6) | libsocket-perl | libsocket6-perl, perl (>= 5.19.8) | libio-socket-ip-perl (>= 0.20) | libio-socket-inet6-perl Suggests: ca-certificates Description: Perl module implementing object oriented interface to SSL sockets This module is a true drop-in replacement for IO::Socket::INET that uses SSL to encrypt data before it is transferred to a remote server or client. IO::Socket::SSL supports all the extra features that one needs to write a full-featured SSL client or server application: multiple SSL contexts, cipher selection, certificate verification, and SSL version selection. As an extra bonus, it works perfectly with mod_perl. . IO::Socket::SSL uses IPv6 if libio-socket-ip-perl (>= 0.20) or libio-socket-inet6-perl is installed. Homepage: https://metacpan.org/release/IO-Socket-SSL Package: libip4tc0 Status: install ok installed Priority: optional Section: libs Installed-Size: 116 Maintainer: Debian Netfilter Packaging Team Architecture: arm64 Multi-Arch: same Source: iptables Version: 1.8.2-4 Depends: libc6 (>= 2.28) Description: netfilter libip4tc library The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . This package contains the user-space iptables (IPv4) C library from the Netfilter xtables framework. . iptables IPv4 ruleset ADT and kernel interface. . This library has been considered private for years (and still is), in the sense of changing symbols and backward compatibility not guaranteed. Homepage: http://www.netfilter.org/ Package: libip6tc0 Status: install ok installed Priority: optional Section: libs Installed-Size: 116 Maintainer: Debian Netfilter Packaging Team Architecture: arm64 Multi-Arch: same Source: iptables Version: 1.8.2-4 Depends: libc6 (>= 2.28) Description: netfilter libip6tc library The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . This package contains the user-space iptables (IPv6) C library from the Netfilter xtables framework. . iptables IPv6 ruleset ADT and kernel interface. . This library has been considered private for years (and still is), in the sense of changing symbols and backward compatibility not guaranteed. Homepage: http://www.netfilter.org/ Package: libiptc0 Status: install ok installed Priority: optional Section: libs Installed-Size: 90 Maintainer: Debian Netfilter Packaging Team Architecture: arm64 Multi-Arch: same Source: iptables Version: 1.8.2-4 Depends: libc6 (>= 2.17), libip4tc0 (>= 1.6.0+snapshot20161117), libip6tc0 (>= 1.6.0+snapshot2016111) Description: netfilter libiptc library The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . This package contains the user-space iptables C library from the Netfilter xtables framework. . iptables v4/v6 ruleset ADT and kernel interface. . This library has been considered private for years (and still is), in the sense of changing symbols and backward compatibility not guaranteed. Homepage: http://www.netfilter.org/ Package: libisc-export1100 Status: install ok installed Priority: optional Section: libs Installed-Size: 669 Maintainer: Debian DNS Team Architecture: arm64 Multi-Arch: same Source: bind9 Version: 1:9.11.5.P4+dfsg-5.1+deb10u11 Depends: libc6 (>= 2.25), libssl1.1 (>= 1.1.0) Description: Exported ISC Shared Library The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the exported libisc shared library. Homepage: https://www.isc.org/downloads/bind/ Package: libisl19 Status: install ok installed Priority: optional Section: libs Installed-Size: 2012 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: same Source: isl Version: 0.20-2 Replaces: libisl-dbg (<< 0.19) Depends: libc6 (>= 2.17), libgmp10 Breaks: libisl-dbg (<< 0.19) Description: manipulating sets and relations of integer points bounded by linear constraints isl is a library for manipulating sets and relations of integer points bounded by linear constraints. Supported operations on sets include intersection, union, set difference, emptiness check, convex hull, (integer) affine hull, integer projection, and computing the lexicographic minimum using parametric integer programming. It also includes an ILP solver based on generalized basis reduction. . This package contains the runtime library. Homepage: http://isl.gforge.inria.fr/ Package: libiw30 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Guus Sliepen Architecture: arm64 Multi-Arch: same Source: wireless-tools Version: 30~pre9-13 Depends: libc6 (>= 2.17) Description: Wireless tools - library Wireless tools are used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This package contains the dynamic library libiw. Homepage: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html Package: libjack-jackd2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1129 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: jackd2 Version: 1.9.12~dfsg-2 Replaces: jackd2 (<< 1.9.10+20150825git1ed50c92~dfsg-5), libjack-0.116, libjack-0.125 Provides: libjack-0.116, libjack-0.125 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libopus0 (>= 1.1), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 5.2) Suggests: jackd2 (= 1.9.12~dfsg-2) Conflicts: jackd2 (>> 1.9.12~dfsg-2), jackd2 (<< 1.9.12~dfsg-2), libjack-0.116, libjack-0.125, libjack0 Description: JACK Audio Connection Kit (libraries) JACK is a low-latency sound server, allowing multiple applications to connect to one audio device, and to share audio between themselves. . This package contains the shared libraries. Homepage: http://jackaudio.org/ Package: libjansson4 Status: install ok installed Priority: optional Section: libs Installed-Size: 87 Maintainer: Alessandro Ghedini Architecture: arm64 Multi-Arch: same Source: jansson Version: 2.12-1 Depends: libc6 (>= 2.17) Description: C library for encoding, decoding and manipulating JSON data Jansson is a C library for encoding, decoding and manipulating JSON data. . It features: * Simple and intuitive API and data model * Comprehensive documentation * No dependencies on other libraries * Full Unicode support (UTF-8) * Extensive test suite Homepage: http://www.digip.org/jansson/ Package: libjavascriptcoregtk-4.0-18 Status: hold ok installed Priority: optional Section: libs Installed-Size: 20938 Maintainer: Debian WebKit Maintainers Architecture: arm64 Multi-Arch: same Source: webkit2gtk Version: 2.36.7-1~deb10u1 Depends: libatomic1 (>= 4.8), libc6 (>= 2.27), libgcc1 (>= 1:4.2), libglib2.0-0 (>= 2.44.0), libicu63 (>= 63.1-1~), libstdc++6 (>= 6), libsystemd0, zlib1g (>= 1:1.1.4) Description: JavaScript engine library from WebKitGTK JavaScriptCore is the JavaScript engine used in WebKit. It consists of the following building blocks: lexer, parser, start-up interpreter (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a high-throughput optimizing JIT (FTL). . This build comes from the GTK port of WebKit (API version 4.0). . This package contains the shared libraries. Homepage: https://webkitgtk.org/ Package: libjbig0 Status: install ok installed Priority: optional Section: libs Installed-Size: 73 Maintainer: Michael van der Kolff Architecture: arm64 Multi-Arch: same Source: jbigkit (2.1-3.1) Version: 2.1-3.1+b2 Depends: libc6 (>= 2.17) Description: JBIGkit libraries JBIG-KIT provides a portable library of compression and decompression functions with a documented interface that you can include very easily into your image or document processing software. . This package contains the dynamically linked library. Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/ Package: libjim0.77 Status: install ok installed Priority: optional Section: libs Installed-Size: 319 Maintainer: Didier Raboud Architecture: arm64 Multi-Arch: same Source: jimtcl Version: 0.77+dfsg0-3 Depends: libc6 (>= 2.17) Description: small-footprint implementation of Tcl - shared library Jim is an opensource small-footprint implementation of the Tcl programming language. It implements a large subset of Tcl and adds new features like references with garbage collection, closures, built-in Object Oriented Programming system, Functional Programming commands, first-class arrays and UTF-8 support. All this with a binary size of about 100-200kB (depending upon selected options). . This package provides the libjim shared library. Homepage: http://jim.tcl.tk/ Package: libjpeg62-turbo Status: install ok installed Priority: optional Section: libs Installed-Size: 307 Maintainer: Ondřej Surý Architecture: arm64 Multi-Arch: same Source: libjpeg-turbo Version: 1:1.5.2-2+deb10u1 Replaces: libjpeg62 Provides: libjpeg62 (= 1:1.5.2-2+deb10u1) Depends: libc6 (>= 2.17) Conflicts: libjpeg62 Description: libjpeg-turbo JPEG runtime library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. The libjpeg-turbo JPEG library is an API/ABI compatible with the IJG JPEG library. . This package contains the shared runtime library. Homepage: http://www.libjpeg-turbo.org/ Package: libjson-c3 Status: install ok installed Priority: optional Section: libs Installed-Size: 70 Maintainer: Debian QA Group Architecture: arm64 Multi-Arch: same Source: json-c Version: 0.12.1+ds-2+deb10u1 Depends: libc6 (>= 2.17) Description: JSON manipulation library - shared library This library allows you to easily construct JSON objects in C, output them as JSON formatted strings and parse JSON formatted strings back into the C representation of JSON objects. Homepage: https://github.com/json-c/json-c/wiki Package: libjson-glib-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 190 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: json-glib Version: 1.4.4-2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.41.1), libjson-glib-1.0-common (>= 1.4.4-2) Description: GLib JSON manipulation library JSON-GLib is a library for parsing, generating and manipulating JavaScript Object Notation (JSON) data streams using the GLib type system. It allows manipulating JSON data types with a Document Object Model API. It also allows serializing and deserializing simple or complex GObjects to and from JSON data types. Homepage: https://wiki.gnome.org/Projects/JsonGlib Package: libjson-glib-1.0-common Status: install ok installed Priority: optional Section: libs Installed-Size: 441 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: json-glib Version: 1.4.4-2 Description: GLib JSON manipulation library (common files) JSON-GLib is a library for parsing, generating and manipulating JavaScript Object Notation (JSON) data streams using the GLib type system. It allows manipulating JSON data types with a Document Object Model API. It also allows serializing and deserializing simple or complex GObjects to and from JSON data types. . This package contains the translations files. Homepage: https://wiki.gnome.org/Projects/JsonGlib Package: libk5crypto3 Status: install ok installed Priority: optional Section: libs Installed-Size: 309 Maintainer: Sam Hartman Architecture: arm64 Multi-Arch: same Source: krb5 Version: 1.17-3+deb10u6 Depends: libc6 (>= 2.17), libkeyutils1 (>= 1.4), libkrb5support0 (>= 1.16) Suggests: krb5-doc, krb5-user Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa) Description: MIT Kerberos runtime libraries - Crypto Library Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime cryptography libraries used by applications and Kerberos clients. Homepage: http://web.mit.edu/kerberos/ Package: libkate1 Status: install ok installed Priority: optional Section: libs Installed-Size: 111 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libkate Version: 0.4.1-9 Depends: libc6 (>= 2.17) Description: Codec for karaoke and text encapsulation Kate is meant to be used for karaoke alongside audio/video streams (typically Vorbis and Theora), movie subtitles, song lyrics, and anything that needs text data at arbitrary time intervals. . libkate provides an API for the encoding and decoding of kate files. Homepage: https://code.google.com/p/libkate/ Package: libkeybinder0 Status: install ok installed Priority: optional Section: libs Installed-Size: 33 Maintainer: Andrew Starr-Bochicchio Architecture: arm64 Source: keybinder Version: 0.3.1-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.12.0), libgtk2.0-0 (>= 2.24.0), libx11-6 Description: registers global key bindings for applications keybinder is a library for registering global keyboard shortcuts to be used by GTK-based applications under the X Window System. . When a combination of key is pressed, keybinder notifies it to the registering application, which can execute one or more operations based on the event previously registered. . Originally written as part of the Tomboy project, keybinder has been distributed as stand-alone library let other applications to use key binding. Homepage: https://github.com/engla/keybinder Package: libkeyutils1 Status: install ok installed Priority: optional Section: libs Installed-Size: 41 Maintainer: Christian Kastner Architecture: arm64 Multi-Arch: same Source: keyutils Version: 1.6-6 Depends: libc6 (>= 2.17) Description: Linux Key Management Utilities (library) Keyutils is a set of utilities for managing the key retention facility in the kernel, which can be used by filesystems, block devices and more to gain and retain the authorization and encryption keys required to perform secure operations. . This package provides a wrapper library for the key management facility system calls. Homepage: https://people.redhat.com/~dhowells/keyutils/ Package: libklibc Status: install ok installed Priority: optional Section: libs Installed-Size: 126 Maintainer: maximilian attems Architecture: arm64 Multi-Arch: same Source: klibc Version: 2.0.6-1+deb10u1 Description: minimal libc subset for use with initramfs klibc is intended to be a minimalistic libc subset for use with initramfs. It is deliberately written for small size, minimal entanglement, and portability, not speed. It is definitely a work in progress, and a lot of things are still missing. Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git Package: libkmod2 Status: install ok installed Priority: optional Section: libs Installed-Size: 124 Maintainer: Marco d'Itri Architecture: arm64 Multi-Arch: same Source: kmod Version: 26-1 Depends: libc6 (>= 2.17), liblzma5 (>= 5.1.1alpha+20120614), libssl1.1 (>= 1.1.0) Description: libkmod shared library This library provides an API for insertion, removal, configuration and listing of kernel modules. Package: libkms1 Status: hold ok installed Priority: optional Section: libs Installed-Size: 48 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libdrm Version: 2.4.97-1 Depends: libdrm2 (>= 2.4.97-1), libc6 (>= 2.17) Description: Userspace interface to kernel DRM KMS services Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libkrb5-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 1110 Maintainer: Sam Hartman Architecture: arm64 Multi-Arch: same Source: krb5 Version: 1.17-3+deb10u6 Depends: libc6 (>= 2.17), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.15~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.17-3+deb10u6), libssl1.1 (>= 1.1.0) Recommends: krb5-locales Suggests: krb5-doc, krb5-user Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3) Description: MIT Kerberos runtime libraries Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime library for the main Kerberos v5 API used by applications and Kerberos clients. Homepage: http://web.mit.edu/kerberos/ Package: libkrb5support0 Status: install ok installed Priority: optional Section: libs Installed-Size: 165 Maintainer: Sam Hartman Architecture: arm64 Multi-Arch: same Source: krb5 Version: 1.17-3+deb10u6 Depends: libc6 (>= 2.17), libkeyutils1 (>= 1.4) Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.16), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-8 (<< 1.16) Description: MIT Kerberos runtime libraries - Support library Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains an internal runtime support library used by other Kerberos libraries. Homepage: http://web.mit.edu/kerberos/ Package: libksba8 Status: install ok installed Priority: optional Section: libs Installed-Size: 263 Maintainer: Debian GnuTLS Maintainers Architecture: arm64 Multi-Arch: same Source: libksba Version: 1.3.5-2+deb10u2 Depends: libc6 (>= 2.17), libgpg-error0 (>= 1.14) Description: X.509 and CMS support library KSBA (pronounced Kasbah) is a library to make X.509 certificates as well as the CMS easily accessible by other applications. Both specifications are building blocks of S/MIME and TLS. . KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER Encoder, Certificate Handling and CMS Handling. . This package contains the runtime library files. Homepage: http://www.gnupg.org/related_software/libksba/ Package: liblcms2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 393 Maintainer: Thomas Weber Architecture: arm64 Multi-Arch: same Source: lcms2 Version: 2.9-3 Depends: libc6 (>= 2.17) Suggests: liblcms2-utils Description: Little CMS 2 color management library LittleCMS 2 intends to be a small-footprint color management engine, with special focus on accuracy and performance. It uses the International Color Consortium standard (ICC) of color management. LittleCMS 2 is a full implementation of ICC specification 4.2 plus all addendums. It fully supports all V2 and V4 profiles, including abstract, devicelink and named color profiles. . This package contains the shared library of liblcms2. Homepage: http://www.littlecms.com/ Package: libldap-2.4-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 522 Maintainer: Debian OpenLDAP Maintainers Architecture: arm64 Multi-Arch: same Source: openldap Version: 2.4.47+dfsg-3+deb10u7 Replaces: libldap-2.3-0, libldap2 Depends: libc6 (>= 2.28), libgnutls30 (>= 3.6.6), libsasl2-2 (>= 2.1.27+dfsg), libldap-common Conflicts: ldap-utils (<= 2.1.23-1) Description: OpenLDAP libraries These are the run-time libraries for the OpenLDAP (Lightweight Directory Access Protocol) servers and clients. Homepage: http://www.openldap.org/ Package: libldap-common Status: install ok installed Priority: optional Section: libs Installed-Size: 113 Maintainer: Debian OpenLDAP Maintainers Architecture: all Multi-Arch: foreign Source: openldap Version: 2.4.47+dfsg-3+deb10u7 Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1) Conffiles: /etc/ldap/ldap.conf 0b3f4d19d88498314478273ce10b0a70 Description: OpenLDAP common files for libraries These are common files for the run-time libraries for the OpenLDAP (Lightweight Directory Access Protocol) servers and clients. Homepage: http://www.openldap.org/ Package: liblightdm-gobject-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 160 Maintainer: Debian Xfce Maintainers Architecture: arm64 Multi-Arch: same Source: lightdm Version: 1.26.0-4 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), libx11-6, libxklavier16 (>= 5.0) Description: simple display manager (GObject library) This package contains the GObject library for lightdm, used by the GTK+ greeter. Homepage: https://launchpad.net/lightdm Package: liblilv-0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 125 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: lilv Version: 0.24.2~dfsg0-2 Depends: libc6 (>= 2.17), libserd-0-0 (>= 0.14.0~dfsg0), libsord-0-0 (>= 0.14.0~dfsg0), libsratom-0-0 (>= 0.4.6~dfsg0) Description: library for simple use of LV2 plugins Lilv (formerly SLV2) is a library for LV2 hosts intended to make using LV2 Plugins as simple as possible (without sacrificing capabilities). . Lilv is the successor to SLV2, rewritten to be significantly faster and have minimal dependencies. . This package provides the shared library. Homepage: http://drobilla.net/software/lilv/ Package: libllvm7 Status: install ok installed Priority: optional Section: libs Installed-Size: 52526 Maintainer: LLVM Packaging Team Architecture: arm64 Multi-Arch: same Source: llvm-toolchain-7 Version: 1:7.0.1-8+deb10u2 Replaces: libllvm3.9v4 Depends: libc6 (>= 2.17), libedit2 (>= 2.11-20080614-0), libffi6 (>= 3.2), libgcc1 (>= 1:4.2), libstdc++6 (>= 6), libtinfo6 (>= 6), zlib1g (>= 1:1.2.0) Breaks: libllvm3.9v4 Description: Modular compiler and toolchain technologies, runtime library LLVM is a collection of libraries and tools that make it easy to build compilers, optimizers, just-in-time code generators, and many other compiler-related programs. . This package contains the LLVM runtime library. Homepage: https://www.llvm.org/ Package: liblocale-gettext-perl Status: install ok installed Priority: required Section: perl Installed-Size: 55 Maintainer: Debian Perl Group Architecture: arm64 Source: liblocale-gettext-perl (1.07-3) Version: 1.07-3+b4 Depends: libc6 (>= 2.17) Pre-Depends: perl-base (>= 5.28.0-3), perlapi-5.28.0 Description: module using libc functions for internationalization in Perl The Locale::gettext module permits access from perl to the gettext() family of functions for retrieving message strings from databases constructed to internationalize software. . It provides gettext(), dgettext(), dcgettext(), textdomain(), bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext() and dngettext(). Homepage: https://metacpan.org/release/gettext Package: liblognorm5 Status: install ok installed Priority: optional Section: libs Installed-Size: 152 Maintainer: Pierre Chifflier Architecture: arm64 Multi-Arch: same Source: liblognorm Version: 2.0.5-1 Depends: libc6 (>= 2.17), libestr0 (>= 0.1.0), libfastjson4 (>= 0.99.3) Description: log normalizing library Liblognorm is an event and log normalization library that is capable of real-time processing. It provides the capability to normalize events to a set of standard formats. . This package contains the shared library. Homepage: http://www.liblognorm.com/ Package: libltdl7 Status: install ok installed Priority: optional Section: libs Installed-Size: 418 Maintainer: Alastair McKinstry Architecture: arm64 Multi-Arch: same Source: libtool Version: 2.4.6-9 Depends: libc6 (>= 2.17) Description: System independent dlopen wrapper for GNU libtool This package contains the run-time libltdl library. . A small library that aims at hiding the various difficulties of dlopening libraries from programmers. It is a system independent dlopen wrapper for GNU libtool. . It supports the following dlopen interfaces: * dlopen (Solaris, Linux and various BSD flavors) * shl_load (HP-UX) * LoadLibrary (Win16 and Win32) * load_add_on (BeOS) * GNU DLD (emulates dynamic linking for static libraries) * libtool's dlpreopen Homepage: https://www.gnu.org/software/libtool/ Package: liblwp-mediatypes-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 100 Maintainer: Debian Perl Group Architecture: all Version: 6.02-1 Replaces: libwww-perl (<< 6.00) Depends: perl Breaks: libwww-perl (<< 6.00) Description: module to guess media type for a file or a URL LWP::MediaTypes provides functions for handling media (also known as MIME) types and encodings. The mapping from file extensions to media types is defined by the media.types file. If the ~/.media.types file exists it is used instead. For backwards compatibility it will also look for ~/.mime.types. Homepage: http://search.cpan.org/dist/LWP-MediaTypes/ Package: liblwp-protocol-https-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 25 Maintainer: Debian Perl Group Architecture: all Version: 6.07-2 Replaces: libwww-perl (<< 6.02) Depends: perl, ca-certificates, libio-socket-ssl-perl, libnet-http-perl, libwww-perl (>= 6.05-2) Suggests: libcrypt-ssleay-perl Breaks: libwww-perl (<< 6.02) Description: HTTPS driver for LWP::UserAgent The LWP::Protocol::https module provides support for using HTTPS schemed URLs with LWP. LWP::Protocol::https is a plug-in to the LWP protocol handling, so you don't use it directly. Once the module is installed LWP is able to access sites using HTTP over SSL/TLS. . If hostname verification is requested by LWP::UserAgent's ssl_opts, and neither SSL_ca_file nor SSL_ca_path is set, then SSL_ca_file is implied to be the one provided by ca-certificates. . This module used to be bundled with libwww-perl, but it was unbundled in v6.02 in order to be able to declare its dependencies properly for the CPAN tool-chain. Applications that need HTTPS support can just declare their dependency on LWP::Protocol::https and will no longer need to know what underlying modules to install. Homepage: https://metacpan.org/release/LWP-Protocol-https Package: liblz4-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 129 Maintainer: Nobuhiro Iwamatsu Architecture: arm64 Multi-Arch: same Source: lz4 Version: 1.8.3-1+deb10u1 Replaces: liblz4-1a Depends: libc6 (>= 2.17) Breaks: liblz4-1a Description: Fast LZ compression algorithm library - runtime LZ4 is a very fast lossless compression algorithm, providing compression speed at 400 MB/s per core, scalable with multi-cores CPU. It also features an extremely fast decoder, with speed in multiple GB/s per core, typically reaching RAM speed limits on multi-core systems. . This package includes the shared library. Homepage: https://github.com/Cyan4973/lz4 Package: liblzma5 Status: install ok installed Priority: optional Section: libs Installed-Size: 255 Maintainer: Jonathan Nieder Architecture: arm64 Multi-Arch: same Source: xz-utils Version: 5.2.4-1+deb10u1 Depends: libc6 (>= 2.17) Breaks: liblzma2 (<< 5.1.1alpha+20110809-3~) Description: XZ-format compression library XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . The native format of liblzma is XZ; it also supports raw (headerless) streams and the older LZMA format used by lzma. (For 7-Zip's related format, use the p7zip package instead.) Homepage: https://tukaani.org/xz/ Package: libmad0 Status: install ok installed Priority: optional Section: libs Installed-Size: 153 Maintainer: Kurt Roeckx Architecture: arm64 Multi-Arch: same Source: libmad Version: 0.15.1b-10 Depends: libc6 (>= 2.17) Description: MPEG audio decoder library MAD is an MPEG audio decoder. It currently only supports the MPEG 1 standard, but fully implements all three audio layers (Layer I, Layer II, and Layer III, the latter often colloquially known as MP3.) . MAD has the following special features: - 100% fixed-point (integer) computation - completely new implementation based on the ISO/IEC 11172-3 standard - distributed under the terms of the GNU General Public License (GPL) Package: libmagic-mgc Status: install ok installed Priority: optional Section: libs Installed-Size: 5300 Maintainer: Christoph Biedl Architecture: arm64 Multi-Arch: foreign Source: file Version: 1:5.35-4+deb10u2 Replaces: libmagic1 (<< 1:5.28-4~) Breaks: libmagic1 (<< 1:5.28-4~) Description: File type determination library using "magic" numbers (compiled magic file) This package provides the compiled magic file "magic.mgc". It has been separated from libmagic1 in order to meet the multiarch requirements without breaking applications that expect this file at its absolute path. Homepage: https://www.darwinsys.com/file/ Package: libmagic1 Status: install ok installed Priority: optional Section: libs Installed-Size: 225 Maintainer: Christoph Biedl Architecture: arm64 Multi-Arch: same Source: file Version: 1:5.35-4+deb10u2 Depends: libc6 (>= 2.17), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.35-4+deb10u2) Suggests: file Conffiles: /etc/magic 272913026300e7ae9b5e2d51f138e674 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674 Description: Recognize the type of data in a file using "magic" numbers - library This library can be used to classify files according to magic number tests. It implements the core functionality of the file command. Homepage: https://www.darwinsys.com/file/ Package: libmenu-cache-bin Status: install ok installed Priority: optional Section: libs Installed-Size: 97 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: foreign Source: menu-cache Version: 1.1.0-1 Replaces: libmenu-cache1 Depends: libc6 (>= 2.17), libfm-extra4 (>= 1.2.0), libglib2.0-0 (>= 2.24.0) Breaks: libmenu-cache1, libmenu-cache3 (<< 0.6.0) Description: LXDE implementation of the freedesktop Menu's cache (libexec) Libmenu-cache is a library creating and utilizing caches to speed up the access to freedesktop.org defined application menus. . This package contains the binaries required to use libmenu-cache library. Homepage: http://www.lxde.org/ Package: libmenu-cache3 Status: install ok installed Priority: optional Section: libs Installed-Size: 55 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: same Source: menu-cache Version: 1.1.0-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.31.8), libmenu-cache-bin (>= 0.7.0) Conflicts: libmenu-cache1 Description: LXDE implementation of the freedesktop Menu's cache Libmenu-cache is a library creating and utilizing caches to speed up the access to freedesktop.org defined application menus. . It can be used as a replacement of libgnome-menu of gnome-menus: . * Shorten time for loading menu entries. * Ease of use (API is very similar to that of libgnome-menu). * Lightweight runtime library (parsing of the menu definition files are done by menu-cache-gen when the menus are really changed). * Less unnecessary and complicated file monitoring. * Heavily reduced disk I/O. Homepage: http://www.lxde.org/ Package: libmjpegutils-2.1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 68 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Source: mjpegtools Version: 1:2.1.0+debian-5 Depends: libc6 (>= 2.17) Description: MJPEG capture/editing/replay and MPEG encoding toolset (library) The mjpeg programs are a set of tools that can do recording of videos and playback, simple cut-and-paste editing and the MPEG compression of audio and video under Linux. . This package contains the shared mjpegutils library. Homepage: http://mjpeg.sourceforge.net/ Package: libmm-glib0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1731 Maintainer: Mathieu Trudel-Lapierre Architecture: arm64 Multi-Arch: same Source: modemmanager Version: 1.10.0-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.36.0) Recommends: modemmanager (>= 1.10.0-1) Description: D-Bus service for managing modems - shared libraries ModemManager is a DBus-activated daemon which controls mobile broadband (2G/3G/4G) devices and connections. Whether built-in devices, USB dongles, Bluetooth-paired telephones or professional RS232/USB devices with external power supplies, ModemManager is able to prepare and configure the modems and setup connections with them. . This package contains shared libraries for applications interfacing with ModemManager. Homepage: https://www.freedesktop.org/wiki/Software/ModemManager/ Package: libmms0 Status: install ok installed Priority: optional Section: libs Installed-Size: 84 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libmms Version: 0.6.4-3 Depends: libc6 (>= 2.17) Description: MMS stream protocol library - shared library LibMMS is a common library for parsing mms:// and mmsh:// type network streams. These are commonly used to stream Windows Media Video content over the web. LibMMS itself is only for receiving MMS stream, it doesn't handle sending at all. . This package holds the shared library. Homepage: http://libmms.sourceforge.net/ Package: libmnl0 Status: install ok installed Priority: important Section: libs Installed-Size: 42 Maintainer: Anibal Monsalve Salazar Architecture: arm64 Multi-Arch: same Source: libmnl Version: 1.0.4-2 Depends: libc6 (>= 2.17) Description: minimalistic Netlink communication library libmnl is a minimalistic user-space library oriented to Netlink developers. There are a lot of common tasks in parsing, validating, constructing of both the Netlink header and TLVs that are repetitive and easy to get wrong. This library aims to provide simple helpers that allows you to re-use code and to avoid re-inventing the wheel. . The main features of this library are: . Small: the shared library requires around 30KB for an x86-based computer. . Simple: this library avoids complexity and elaborated abstractions that tend to hide Netlink details. . Easy to use: the library simplifies the work for Netlink-wise developers. It provides functions to make socket handling, message building, validating, parsing and sequence tracking, easier. . Easy to re-use: you can use the library to build your own abstraction layer on top of this library. . Decoupling: the interdependency of the main bricks that compose the library is reduced, i.e. the library provides many helpers, but the programmer is not forced to use them. . This package contains the shared libraries needed to run programs that use the minimalistic Netlink communication library. Homepage: http://netfilter.org/projects/libmnl/ Package: libmodplug1 Status: install ok installed Priority: optional Section: libs Installed-Size: 300 Maintainer: Stephen Kitt Architecture: arm64 Multi-Arch: same Source: libmodplug Version: 1:0.8.9.0-2 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5) Description: shared libraries for mod music based on ModPlug Module files (MOD music, tracker music) are a family of music file formats originating from the MOD file format on Amiga systems used in late 1980s. . This is a library based on the mod music rendering code from ModPlug, a popular Windows mod player written by Olivier Lapicque, found at http://www.modplug.com. Homepage: http://modplug-xmms.sourceforge.net/ Package: libmount1 Status: install ok installed Priority: optional Section: libs Installed-Size: 487 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: same Source: util-linux Version: 2.33.1-0.1+deb10u1 Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.25), libselinux1 (>= 2.6-3~) Description: device mounting library This device mounting library is used by mount and umount helpers. Package: libmp3lame0 Status: install ok installed Priority: optional Section: libs Installed-Size: 512 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: lame (3.100-2) Version: 3.100-2+b1 Depends: libc6 (>= 2.27) Description: MP3 encoding library LAME (recursive acronym for "LAME Ain't an MP3 Encoder") is a research project for learning about and improving MP3 encoding technology. LAME includes an MP3 encoding library, a simple frontend application, and other tools for sound analysis, as well as convenience tools. . This package contains the shared library. Homepage: http://lame.sourceforge.net/ Package: libmpc3 Status: install ok installed Priority: extra Section: libs Installed-Size: 110 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: same Source: mpclib3 Version: 1.1.0-1 Depends: libc6 (>= 2.17), libgmp10, libmpfr6 (>= 4.0.0) Description: multiple precision complex floating-point library MPC is a portable library written in C for arbitrary precision arithmetic on complex numbers providing correct rounding. For the time being, it contains all arithmetic operations over complex numbers, the exponential and the logarithm functions, the trigonometric and hyperbolic functions. . Ultimately, it should implement a multiprecision equivalent of the ISO C99 standard. . It builds upon the GNU MP and the MPFR libraries. Homepage: http://www.multiprecision.org/mpc/ Package: libmpcdec6 Status: install ok installed Priority: optional Section: libs Installed-Size: 81 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libmpc (2:0.1~r495-1) Version: 2:0.1~r495-1+b2 Depends: libc6 (>= 2.17) Description: MusePack decoder - library Musepack is an audio compression format with a strong emphasis on high quality. It's not lossless, but it is designed for transparency, so that you won't be able to hear differences between the original wave file and the much smaller MPC file. . It is based on the MPEG-1 Layer-2 / MP2 algorithms, but since 1997 it has rapidly developed and vastly improved and is now at an advanced stage in which it contains heavily optimized and patentless code. Homepage: http://www.musepack.net Package: libmpdec2 Status: install ok installed Priority: optional Section: libs Installed-Size: 226 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: same Source: mpdecimal Version: 2.4.2-2 Replaces: libmpdec2.3 Depends: libc6 (>= 2.17) Breaks: libmpdec2.3 Description: library for decimal floating point arithmetic (runtime library) mpdecimal is a package for correctly-rounded arbitrary precision decimal floating point arithmetic. Homepage: http://www.bytereef.org/mpdecimal/index.html Package: libmpeg2-4 Status: install ok installed Priority: optional Section: libs Installed-Size: 147 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: mpeg2dec Version: 0.5.1-8 Depends: libc6 (>= 2.17) Description: MPEG1 and MPEG2 video decoder library libmpeg2 is a library which can decode MPEG1 and MPEG2 video streams. . The main features in libmpeg2 are: . * Conformance - libmpeg2 is able to decode all mpeg streams that conform to certain restrictions. For streams that follow these restrictions, libmpeg2 is probably 100% conformant to the mpeg standards - and there's a pretty extensive test suite to check this. . * Speed - there has been huge efforts there, and libmpeg2 is probably the fastest library around for what it does. . * Portability - most of the code is written in C, and when platform-specific optimizations are used, there always is a generic C routine to fall back on. This should be portable to all architectures - at least it is known people run this code on x86, ppc, sparc, arm and sh4. . * Reuseability - libmpeg2 is not intended to include any project-specific code, but it should still include enough features to be used by very diverse projects. . This package contains the libmpeg2 shared libraries. Homepage: http://libmpeg2.sourceforge.net/ Package: libmpeg2encpp-2.1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 181 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Source: mjpegtools Version: 1:2.1.0+debian-5 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libmjpegutils-2.1-0, libstdc++6 (>= 5) Description: MJPEG capture/editing/replay and MPEG encoding toolset (library) The mjpeg programs are a set of tools that can do recording of videos and playback, simple cut-and-paste editing and the MPEG compression of audio and video under Linux. . This package contains the shared mpeg2encpp library. Homepage: http://mjpeg.sourceforge.net/ Package: libmpfr6 Status: install ok installed Priority: optional Section: libs Installed-Size: 1053 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: same Source: mpfr4 Version: 4.0.2-1 Depends: libc6 (>= 2.17), libgmp10 Breaks: libcgal13 (<< 4.11-2+b1), libflint-2.5.2 (<< 2.5.2-17+b2), libgiac0 (<< 1.2.3.57+dfsg1-2+b4), libgmp3 (<< 4.1.4-3), libmpc3 (<< 1.1.0-1~), libnormaliz3 (<< 3.5.1+ds-4), sagemath (<< 8.1-2+b2) Description: multiple precision floating-point computation MPFR provides a library for multiple-precision floating-point computation with correct rounding. The computation is both efficient and has a well-defined semantics. It copies the good ideas from the ANSI/IEEE-754 standard for double-precision floating-point arithmetic (53-bit mantissa). Homepage: http://www.mpfr.org/ Package: libmpg123-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 286 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: mpg123 Version: 1.25.10-2 Depends: libc6 (>= 2.17) Description: MPEG layer 1/2/3 audio decoder (shared library) mpg123 is a real time MPEG 1.0/2.0/2.5 audio player/decoder for layers 1, 2 and 3 (MPEG 1.0 layer 3 also known as MP3). . This package contains the C libraries needed to run executables that use the mpg123 library. Homepage: http://mpg123.org/ Package: libmplex2-2.1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 141 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Source: mjpegtools Version: 1:2.1.0+debian-5 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libmjpegutils-2.1-0, libstdc++6 (>= 5) Description: MJPEG capture/editing/replay and MPEG encoding toolset (library) The mjpeg programs are a set of tools that can do recording of videos and playback, simple cut-and-paste editing and the MPEG compression of audio and video under Linux. . This package contains the shared mplex2 library. Homepage: http://mjpeg.sourceforge.net/ Package: libmtdev1 Status: install ok installed Priority: optional Section: libs Installed-Size: 52 Maintainer: Nobuhiro Iwamatsu Architecture: arm64 Multi-Arch: same Source: mtdev (1.1.5-1) Version: 1.1.5-1+b1 Depends: libc6 (>= 2.17) Description: Multitouch Protocol Translation Library - shared library libmtdev is a library for translating evdev multitouch events using the legacy protocol to the new multitouch slots protocol. This is necessary for kernel drivers that have not been updated to use the newer protocol. Homepage: http://bitmath.org/code/mtdev/ Package: libncurses6 Status: install ok installed Priority: optional Section: libs Installed-Size: 313 Maintainer: Craig Small Architecture: arm64 Multi-Arch: same Source: ncurses Version: 6.1+20181013-2+deb10u5 Depends: libtinfo6 (= 6.1+20181013-2+deb10u5), libc6 (>= 2.17) Recommends: libgpm2 Description: shared libraries for terminal handling The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared libraries necessary to run programs compiled with ncurses. Homepage: https://invisible-island.net/ncurses/ Package: libncursesw6 Status: install ok installed Priority: optional Section: libs Installed-Size: 386 Maintainer: Craig Small Architecture: arm64 Multi-Arch: same Source: ncurses Version: 6.1+20181013-2+deb10u5 Depends: libtinfo6 (= 6.1+20181013-2+deb10u5), libc6 (>= 2.17) Recommends: libgpm2 Description: shared libraries for terminal handling (wide character support) The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared libraries necessary to run programs compiled with ncursesw, which includes support for wide characters. Homepage: https://invisible-island.net/ncurses/ Package: libndp0 Status: install ok installed Priority: optional Section: libs Installed-Size: 41 Maintainer: Andrew Ayer Architecture: arm64 Multi-Arch: same Source: libndp Version: 1.6-1+deb10u1 Depends: libc6 (>= 2.17) Description: Library for Neighbor Discovery Protocol libndp is a library for the IPv6 Neighbor Discovery Protocol (NDP). It contains functions for building and parsing NDP messages, and provides a high-level interface for sending and receiving NDP messages on a network interface. Homepage: http://libndp.org Package: libnet-dbus-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 620 Maintainer: Debian Perl Group Architecture: arm64 Source: libnet-dbus-perl (1.1.0-5) Version: 1.1.0-5+b1 Depends: perl (>= 5.28.0-3), perlapi-5.28.0, libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libxml-twig-perl Description: Perl extension for the DBus bindings Net::DBus provides a Perl API for the DBus message system. The DBus Perl interface is currently operating against the 0.32 development version of DBus, but should work with later versions too, providing the API changes have not been too drastic. . Users of this package are either typically, service providers in which case the Net::DBus::Service and Net::DBus::Object modules are of most relevance, or are client consumers, in which case Net::DBus::RemoteService and Net::DBus::RemoteObject are of most relevance. Homepage: https://metacpan.org/release/Net-DBus Package: libnet-http-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 61 Maintainer: Debian Perl Group Architecture: all Version: 6.18-1 Depends: perl, perl (>= 5.19.8) | libio-socket-ip-perl (>= 0.26), liburi-perl Recommends: libio-socket-ssl-perl (>= 2.012) Description: module providing low-level HTTP connection client The Net::HTTP class is a low-level HTTP client. An instance of the Net::HTTP class represents a connection to an HTTP server. The HTTP protocol is described in RFC 2616. The Net::HTTP class supports HTTP/1.0 and HTTP/1.1. Net::HTTP is a sub-class of IO::Socket::INET. You can mix its methods with reading and writing from the socket directly. This is not necessarily a good idea, unless you know what you are doing. Homepage: https://metacpan.org/release/Net-HTTP Package: libnet-ssleay-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 1244 Maintainer: Debian Perl Group Architecture: arm64 Version: 1.85-2+deb10u1 Depends: perl (>= 5.28.1-6+deb10u1), perl-openssl-abi-1.1, perlapi-5.28.1, libc6 (>= 2.17), libssl1.1 (>= 1.1.1) Description: Perl module for Secure Sockets Layer (SSL) Net::SSLeay is a perl module that allows you to call Secure Sockets Layer (SSL) functions of the SSLeay library directly from your perl scripts. It is useful if you want to program robots that access secure web servers or if you want to build your own applications over SSL encrypted tunnels. If you just want to view web pages on https servers, you do not need this - your web browser already knows to do that. Homepage: https://metacpan.org/release/Net-SSLeay Package: libnetfilter-conntrack3 Status: install ok installed Priority: optional Section: libs Installed-Size: 118 Maintainer: Debian Netfilter Packaging Team Architecture: arm64 Multi-Arch: same Source: libnetfilter-conntrack Version: 1.0.7-1 Depends: libc6 (>= 2.17), libmnl0 (>= 1.0.3-4~), libnfnetlink0 Description: Netfilter netlink-conntrack library libnetfilter_conntrack is a userspace library providing a programming interface (API) to the in-kernel connection tracking state table. Homepage: http://www.netfilter.org/projects/libnetfilter_conntrack/ Package: libnettle6 Status: install ok installed Priority: optional Section: libs Installed-Size: 380 Maintainer: Magnus Holmgren Architecture: arm64 Multi-Arch: same Source: nettle Version: 3.4.1-1+deb10u1 Depends: libc6 (>= 2.17) Description: low level cryptographic library (symmetric and one-way cryptos) Nettle is a cryptographic library that is designed to fit easily in more or less any context: In crypto toolkits for object-oriented languages (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel space. . It tries to solve a problem of providing a common set of cryptographic algorithms for higher-level applications by implementing a context-independent set of cryptographic algorithms. In that light, Nettle doesn't do any memory allocation or I/O, it simply provides the cryptographic algorithms for the application to use in any environment and in any way it needs. . This package contains the symmetric and one-way cryptographic algorithms. To avoid having this package depend on libgmp, the asymmetric cryptos reside in a separate library, libhogweed. Homepage: http://www.lysator.liu.se/~nisse/nettle/ Package: libnewt0.52 Status: install ok installed Priority: optional Section: libs Installed-Size: 370 Maintainer: Alastair McKinstry Architecture: arm64 Multi-Arch: same Source: newt Version: 0.52.20-8 Depends: libc6 (>= 2.17), libslang2 (>= 2.2.4) Recommends: libfribidi0 Description: Not Erik's Windowing Toolkit - text mode windowing with slang Newt is a windowing toolkit for text mode built from the slang library. It allows color text mode applications to easily use stackable windows, push buttons, check boxes, radio buttons, lists, entry fields, labels, and displayable text. Scrollbars are supported, and forms may be nested to provide extra functionality. This package contains the shared library for programs that have been built with newt. Homepage: https://pagure.io/newt Package: libnfnetlink0 Status: install ok installed Priority: extra Section: libs Installed-Size: 41 Maintainer: Alexander Wirt Architecture: arm64 Multi-Arch: same Source: libnfnetlink (1.0.1-3) Version: 1.0.1-3+b1 Depends: libc6 (>= 2.17) Description: Netfilter netlink library libnfnetlink is the low-level library for netfilter related kernel/userspace communication. It provides a generic messaging infrastructure for in-kernel netfilter subsystems (such as nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their respective users and/or management tools in userspace. Package: libnftnl11 Status: install ok installed Priority: optional Section: libs Installed-Size: 211 Maintainer: Debian Netfilter Packaging Team Architecture: arm64 Multi-Arch: same Source: libnftnl Version: 1.1.2-2 Depends: libc6 (>= 2.17), libmnl0 (>= 1.0.3-4~) Description: Netfilter nftables userspace API library libnftnl is the low-level library for Netfilter 4th generation framework nftables. . Is the user-space library for low-level interaction with nftables Netlink's API over libmnl. Homepage: https://git.netfilter.org/libnftnl Package: libnghttp2-14 Status: install ok installed Priority: optional Section: libs Installed-Size: 211 Maintainer: Tomasz Buchert Architecture: arm64 Multi-Arch: same Source: nghttp2 Version: 1.36.0-2+deb10u3 Depends: libc6 (>= 2.17) Description: library implementing HTTP/2 protocol (shared library) This is an implementation of the Hypertext Transfer Protocol version 2 in C. The framing layer of HTTP/2 is implemented as a reusable C library. . This package installs a shared library. Homepage: https://nghttp2.org/ Package: libnice10 Status: install ok installed Priority: optional Section: libs Installed-Size: 308 Maintainer: Debian Telepathy maintainers Architecture: arm64 Multi-Arch: same Source: libnice Version: 0.1.14-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.44), libgnutls30 (>= 3.5.0), libgupnp-1.0-4 (>= 0.18.0), libgupnp-igd-1.0-4 (>= 0.2.4) Description: ICE library (shared library) Nice is an implementation of the IETF's draft Interactive Connectivity Establishment standard (ICE). ICE is useful for applications that want to establish peer-to-peer UDP data streams. It automates the process of traversing NATs and provides security against some attacks. . Existing standards that use ICE include the Session Initiation Protocol (SIP) and the Jingle XMPP extension for audio/video calls. . Nice includes integration with GStreamer. . This package provides the nice library. Homepage: https://nice.freedesktop.org/ Package: libnl-3-200 Status: install ok installed Priority: optional Section: libs Installed-Size: 165 Maintainer: Heiko Stuebner Architecture: arm64 Multi-Arch: same Source: libnl3 Version: 3.4.0-1 Depends: libc6 (>= 2.17) Conffiles: /etc/libnl-3/classid 3e07259e58674631830b152e983ca995 /etc/libnl-3/pktloc 7613dbc41b2dc3258195b6b6abd0f179 Description: library for dealing with netlink sockets This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. Homepage: http://www.infradead.org/~tgr/libnl/ Package: libnl-genl-3-200 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Heiko Stuebner Architecture: arm64 Multi-Arch: same Source: libnl3 Version: 3.4.0-1 Depends: libnl-3-200 (= 3.4.0-1), libc6 (>= 2.17) Description: library for dealing with netlink sockets - generic netlink This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. . API to the generic netlink protocol, an extended version of the netlink protocol. Homepage: http://www.infradead.org/~tgr/libnl/ Package: libnl-route-3-200 Status: install ok installed Priority: optional Section: libs Installed-Size: 489 Maintainer: Heiko Stuebner Architecture: arm64 Multi-Arch: same Source: libnl3 Version: 3.4.0-1 Depends: libnl-3-200 (= 3.4.0-1), libc6 (>= 2.17) Description: library for dealing with netlink sockets - route interface This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. . API to the configuration interfaces of the NETLINK_ROUTE family. Homepage: http://www.infradead.org/~tgr/libnl/ Package: libnm0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1316 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: network-manager Version: 1.14.6-2+deb10u1 Depends: libc6 (>= 2.25), libglib2.0-0 (>= 2.43.2), libgnutls30 (>= 3.6.5), libudev1 (>= 183), libuuid1 (>= 2.16) Description: GObject-based client library for NetworkManager NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. . This package contains a convenience library to ease the access to NetworkManager. Homepage: https://wiki.gnome.org/Projects/NetworkManager Package: libnotify4 Status: install ok installed Priority: optional Section: libs Installed-Size: 64 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libnotify Version: 0.7.7-4 Depends: libc6 (>= 2.17), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3) Recommends: notification-daemon Description: sends desktop notifications to a notification daemon A library that sends desktop notifications to a notification daemon, as defined in the Desktop Notifications spec. These notifications can be used to inform the user about an event or display some form of information without getting in the user's way. . This package contains the shared library. To actually display the notifications, you need to install the package notification-daemon. Package: libnpth0 Status: install ok installed Priority: optional Section: libs Installed-Size: 42 Maintainer: Eric Dorland Architecture: arm64 Multi-Arch: same Source: npth Version: 1.6-1 Depends: libc6 (>= 2.17) Description: replacement for GNU Pth using system threads nPth is a non-preemptive threads implementation using an API very similar to the one known from GNU Pth. It has been designed as a replacement of GNU Pth for non-ancient operating systems. In contrast to GNU Pth it is based on the system's standard threads implementation. Thus nPth allows the use of libraries which are not compatible to GNU Pth. Homepage: https://www.gnupg.org/ Package: libnspr4 Status: install ok installed Priority: optional Section: libs Installed-Size: 315 Maintainer: Maintainers of Mozilla-related packages Architecture: arm64 Multi-Arch: same Source: nspr Version: 2:4.20-1 Depends: libc6 (>= 2.17) Conflicts: libnspr4-0d (<< 2:4.9-2~) Description: NetScape Portable Runtime Library This library provides platform independent non-GUI operating system facilities including: * threads, * thread synchronisation, * normal file I/O and network I/O, * interval timing and calendar time, * basic memory management (malloc and free), * shared library linking. Homepage: http://www.mozilla.org/projects/nspr/ Package: libnss3 Status: install ok installed Priority: optional Section: libs Installed-Size: 3585 Maintainer: Maintainers of Mozilla-related packages Architecture: arm64 Multi-Arch: same Source: nss Version: 2:3.42.1-1+deb10u8 Depends: libc6 (>= 2.17), libnspr4 (>= 2:4.12), libsqlite3-0 (>= 3.5.9) Conflicts: libnss3-1d (<< 2:3.13.4-2) Description: Network Security Service libraries This is a set of libraries designed to support cross-platform development of security-enabled client and server applications. It can support SSLv2 and v4, TLS, PKCS #5, #7, #11, #12, S/MIME, X.509 v3 certificates and other security standards. Homepage: http://www.mozilla.org/projects/security/pki/nss/ Package: libntfs-3g883 Status: install ok installed Priority: optional Section: libs Installed-Size: 366 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Source: ntfs-3g Version: 1:2017.3.23AR.3-3+deb10u3 Depends: libc6 (>= 2.17) Description: read/write NTFS driver for FUSE (runtime library) NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS filesystem used by Microsoft Windows. . This package contains the actual library. Homepage: http://jp-andre.pagesperso-orange.fr/advanced-ntfs-3g.html Package: libntlm0 Status: install ok installed Priority: optional Section: libs Installed-Size: 56 Maintainer: Debian Authentication Maintainers Architecture: arm64 Multi-Arch: same Source: libntlm Version: 1.5-1+deb10u1 Depends: libc6 (>= 2.17) Description: NTLM authentication library NTLM is an authentication protocol used in various Microsoft network protocol implementations and supported by the NTLM Security Support Provider ("NTLMSSP"). Originally used for authentication and negotiation of secure DCE/RPC, NTLM is also used throughout Microsoft's systems as an integrated single sign-on mechanism. . NTLM employs a challenge-response mechanism for authentication, in which clients are able to prove their identities without sending a password to the server. It consists of three messages, commonly referred to as Type 1 (negotiation), Type 2 (challenge) and Type 3 (authentication). Homepage: http://www.nongnu.org/libntlm/ Package: libnuma1 Status: install ok installed Priority: optional Section: libs Installed-Size: 73 Maintainer: Ian Wienand Architecture: arm64 Multi-Arch: same Source: numactl Version: 2.0.12-1 Depends: libc6 (>= 2.17) Description: Libraries for controlling NUMA policy Library to control specific NUMA (Non-Uniform Memory Architecture) scheduling or memory placement policies. Homepage: https://github.com/numactl/numactl Package: libobrender32v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 153 Maintainer: Mateusz Łukasik Architecture: arm64 Source: openbox Version: 3.6.1-8 Replaces: libobrender32 Depends: libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.35.9), libice6 (>= 1:1.0.0), libimlib2 (>= 1.4.5), libobt2v5 (>= 3.6.0), libpango-1.0-0 (>= 1.18.0), libpangoft2-1.0-0 (>= 1.14.0), libpangoxft-1.0-0 (>= 1.14.0), librsvg2-2 (>= 2.14.4), libsm6, libx11-6, libxft2 (>> 2.1.1), libxml2 (>= 2.6.27) Conflicts: libobrender32 Description: rendering library for openbox themes Openbox works with your applications, and makes your desktop easier to manage. This is because the approach to its development was the opposite of what seems to be the general case for window managers. Openbox was written first to comply with standards and to work properly. Only when that was in place did the team turn to the visual interface. . Openbox is fully functional as a stand-alone working environment, or can be used as a drop-in replacement for the default window manager in the GNOME or KDE desktop environments. . Openbox 3 is a completely new breed of window manager. It is not based upon any existing code base, although the visual appearance has been based upon that of Blackbox. Openbox 2 was based on the Blackbox 0.65.0 codebase. . This package contains the libobrender library files used by openbox for theme rendering. Homepage: http://www.openbox.org Package: libobt2v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 126 Maintainer: Mateusz Łukasik Architecture: arm64 Source: openbox Version: 3.6.1-8 Replaces: libobt2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.35.9), libice6 (>= 1:1.0.0), libsm6, libx11-6, libxext6, libxinerama1, libxml2 (>= 2.7.4), libxrandr2, libxrender1 Conflicts: libobt2 Description: parsing library for openbox Openbox works with your applications, and makes your desktop easier to manage. This is because the approach to its development was the opposite of what seems to be the general case for window managers. Openbox was written first to comply with standards and to work properly. Only when that was in place did the team turn to the visual interface. . Openbox is fully functional as a stand-alone working environment, or can be used as a drop-in replacement for the default window manager in the GNOME or KDE desktop environments. . Openbox 3 is a completely new breed of window manager. It is not based upon any existing code base, although the visual appearance has been based upon that of Blackbox. Openbox 2 was based on the Blackbox 0.65.0 codebase. . This package contains the libobt library files used by openbox to load and parse configuration and theme files of openbox. Homepage: http://www.openbox.org Package: libofa0 Status: install ok installed Priority: optional Section: libs Installed-Size: 159 Maintainer: Joao Eriberto Mota Filho Architecture: arm64 Multi-Arch: same Source: libofa Version: 0.9.3-19 Depends: libc6 (>= 2.27), libfftw3-double3 (>= 3.3.5), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Description: library for acoustic fingerprinting LibOFA (Library Open Fingerprint Architecture) is a library for generating acoustic fingerprints that can be used to identify music files using the MusicDNS service. . This package provides the runtime library. Homepage: https://github.com/tanob/libofa Package: libogg0 Status: install ok installed Priority: optional Section: libs Installed-Size: 54 Maintainer: Ron Lee Architecture: arm64 Multi-Arch: same Source: libogg (1.3.2-1) Version: 1.3.2-1+b1 Depends: libc6 (>= 2.17) Description: Ogg bitstream library Libogg is a library for manipulating ogg bitstreams. It handles both making ogg bitstreams and getting packets from ogg bitstreams. Homepage: http://xiph.org/ogg/ Package: liboobs-1-5 Status: install ok installed Priority: optional Section: libs Installed-Size: 200 Maintainer: Andriy Grytsenko Architecture: arm64 Multi-Arch: same Source: liboobs Version: 3.0.0-4 Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.41.1), system-tools-backends (>= 2.10.1) Breaks: gnome-system-tools (<< 2.30) Description: GObject based interface to system-tools-backends - shared library Liboobs is a lightweight library that provides a GObject based interface to system-tools-backends. It's completely abstracted of the communication and authentication details, making it easy for applications to integrate with the system details. . This package contains the shared library. Homepage: https://developer.gnome.org/liboobs Package: libopenal-data Status: install ok installed Priority: optional Section: libs Installed-Size: 206 Maintainer: Debian Games Team Architecture: all Multi-Arch: foreign Source: openal-soft Version: 1:1.19.1-1 Replaces: libopenal1 (<< 1:1.14-5) Breaks: libopenal1 (<< 1:1.14-5) Conffiles: /etc/openal/alsoft.conf d1bc9fa6aeada2951603d417e2993afe Description: Software implementation of the OpenAL audio API (data files) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . This package installs data files used by the OpenAL Soft shared library. Homepage: http://kcat.strangesoft.net/openal.html Package: libopenal1 Status: install ok installed Priority: optional Section: libs Installed-Size: 934 Maintainer: Debian Games Team Architecture: arm64 Multi-Arch: same Source: openal-soft Version: 1:1.19.1-1 Depends: libopenal-data (= 1:1.19.1-1), libatomic1 (>= 4.8), libc6 (>= 2.27), libsndio7.0 (>= 1.1.0) Recommends: libasound2 (>= 1.0.16), libpulse0 (>= 0.99.1) Suggests: libportaudio2 (>= 19+svn20101113) Description: Software implementation of the OpenAL audio API (shared library) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . This library is meant as a compatible update/replacement to the OpenAL Sample Implementation (the SI). The SI has been unmaintained for quite a while, and would require a lot of work to clean up. This is a fork the old Windows version to attempt an accelerated ALSA version of an OpenAL implementation. . OpenAL Soft supports mono, stereo, 4-channel, 5.1, 6.1, and 7.1 output, as opposed to the SI's 4-channel max (though it did have some provisions for 6 channel, this was not 5.1, and was seemingly a "late" addition). OpenAL Soft does not support the Vorbis and MP3 extensions, however those were considered deprecated even in the SI. It does, though, support some of the newer extensions like AL_EXT_FLOAT32 and AL_EXT_MCFORMATS for multi-channel and floating-point formats, as well as ALC_EXT_EFX for environmental audio effects, and others. . This package installs the OpenAL Soft shared library. Homepage: http://kcat.strangesoft.net/openal.html Package: libopencore-amrnb0 Status: install ok installed Priority: optional Section: libs Installed-Size: 160 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: opencore-amr (0.1.3-2.1) Version: 0.1.3-2.1+b2 Depends: libc6 (>= 2.17) Description: Adaptive Multi Rate speech codec - shared library This library contains an implementation of the 3GPP TS 26.073 specification for the Adaptive Multi Rate (AMR) speech codec. The implementation is derived from the OpenCORE framework, part of the Google Android project. . This package contains the encoder/decoder shared library. Homepage: https://sourceforge.net/projects/opencore-amr/ Package: libopencore-amrwb0 Status: install ok installed Priority: optional Section: libs Installed-Size: 85 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: opencore-amr (0.1.3-2.1) Version: 0.1.3-2.1+b2 Depends: libc6 (>= 2.17) Description: Adaptive Multi-Rate - Wideband speech codec - shared library This library contains an implementation of the 3GPP TS 26.173 specification for the Adaptive Multi-Rate - Wideband (AMR-WB) speech decoder. The implementation is derived from the OpenCORE framework, part of the Google Android project. . This package contains the decoder shared library. Homepage: https://sourceforge.net/projects/opencore-amr/ Package: libopencv-core3.2 Status: install ok installed Priority: optional Section: libs Installed-Size: 2028 Maintainer: Debian Science Team Architecture: arm64 Multi-Arch: same Source: opencv Version: 3.2.0+dfsg-6 Depends: libc6 (>= 2.27), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), libtbb2, zlib1g (>= 1:1.1.4) Description: computer vision core library This package contains the OpenCV (Open Computer Vision) core runtime libraries. . The Open Computer Vision Library is a collection of algorithms and sample code for various computer vision problems. The library is compatible with IPL (Intel's Image Processing Library) and, if available, can use IPP (Intel's Integrated Performance Primitives) for better performance. . OpenCV provides low level portable data types and operators, and a set of high level functionalities for video acquisition, image processing and analysis, structural analysis, motion analysis and object tracking, object recognition, camera calibration and 3D reconstruction. Homepage: https://opencv.org Package: libopenexr23 Status: install ok installed Priority: optional Section: libs Installed-Size: 2996 Maintainer: Debian PhotoTools Maintainers Architecture: arm64 Multi-Arch: same Source: openexr Version: 2.2.1-4.1+deb10u2 Replaces: libopenexr22 (= 2.2.1-1) Depends: libc6 (>= 2.27), libgcc1 (>= 1:3.0), libilmbase23 (>= 2.2.1), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.0) Breaks: libopenexr22 (= 2.2.1-1) Description: runtime files for the OpenEXR image library OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light & Magic for use in computer imaging applications. . OpenEXR's features include: * Higher dynamic range and colour precision than existing 8- and 10-bit image file formats. * Support for the "half" 16-bit floating-point pixel format. * Multiple lossless image compression algorithms. Some of the included codecs can achieve 2:1 lossless compression ratios on images with film grain. * Extensibility. New compression codecs and image types can easily be added by extending the C++ classes included in the OpenEXR software distribution. New image attributes (strings, vectors, integers, etc.) can be added to OpenEXR image headers without affecting backward compatibility with existing OpenEXR applications. . This package contains the following shared library: * IlmImf - a library that reads and writes OpenEXR images. Homepage: http://www.openexr.com Package: libopenjp2-7 Status: install ok installed Priority: optional Section: libs Installed-Size: 398 Maintainer: Debian PhotoTools Maintainers Architecture: arm64 Multi-Arch: same Source: openjpeg2 Version: 2.3.0-2+deb10u2 Depends: libc6 (>= 2.17) Description: JPEG 2000 image compression/decompression library OpenJPEG is a library for handling the JPEG 2000 image compression format. JPEG 2000 is a wavelet-based image compression standard and permits progressive transmission by pixel and resolution accuracy for progressive downloads of an encoded image. It supports lossless and lossy compression, supports higher compression than JPEG 1991, and has resilience to errors in the image. . This package contains the runtime files for openjpeg 2.x Homepage: http://www.openjpeg.org Package: libopenmpt0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1568 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libopenmpt Version: 0.4.3-1+deb10u1 Depends: libc6 (>= 2.27), libgcc1 (>= 1:3.0), libmpg123-0 (>= 1.13.7), libstdc++6 (>= 8), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.1.2), zlib1g (>= 1:1.1.4) Description: module music library based on OpenMPT -- shared library libopenmpt is a cross-platform C++ and C library to decode tracked music files (modules) into a raw PCM audio stream. It is based on the player code of the OpenMPT project, a descendant of the original ModPlug Tracker. . This package contains the main shared library. Homepage: https://lib.openmpt.org/libopenmpt/ Package: libopts25 Status: install ok installed Priority: optional Section: libs Installed-Size: 165 Maintainer: Andreas Metzler Architecture: arm64 Multi-Arch: same Source: autogen Version: 1:5.18.12-4 Replaces: autogen Depends: libc6 (>= 2.17) Description: automated option processing library based on autogen This package contains the shared libraries needed by binaries that use autoopts for option processing. The package containing the header files and static libraries is libopts25-dev. The package containing the development tools is autogen. Homepage: https://www.gnu.org/software/autogen/ Package: libopus0 Status: install ok installed Priority: optional Section: libs Installed-Size: 331 Maintainer: Ron Lee Architecture: arm64 Multi-Arch: same Source: opus Version: 1.3-1 Depends: libc6 (>= 2.17) Suggests: opus-tools Description: Opus codec runtime library The Opus codec is designed for interactive speech and audio transmission over the Internet. It is designed by the IETF Codec Working Group and incorporates technology from Skype's SILK codec and Xiph.Org's CELT codec. . It is intended to suit a wide range of interactive audio applications, including Voice over IP, videoconferencing, in-game chat, and even remote live music performances. It can scale from low bit-rate narrowband speech to very high quality stereo music. The current features are: . Bit-rates from 6 kb/s 510 kb/s Sampling rates from 8 to 48 kHz Frame sizes from 2.5 ms to 60 ms Support for both constant bit-rate (CBR) and variable bit-rate (VBR) Audio bandwidth from narrowband to full-band Support for speech and music Support for mono and stereo Support for up to 255 channels (multistream frames) Dynamically adjustable bitrate, audio bandwidth, and frame size Good loss robustness and packet loss concealment (PLC) Floating point and fixed-point implementation . This package provides the Opus runtime library. Homepage: http://www.opus-codec.org Package: liborc-0.4-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 557 Maintainer: Maintainers of GStreamer packages Architecture: arm64 Multi-Arch: same Source: orc Version: 1:0.4.28-3.1 Depends: libc6 (>= 2.17) Description: Library of Optimized Inner Loops Runtime Compiler Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the orc shared libraries. It is typically installed automatically when an application or library requires it. Homepage: https://cgit.freedesktop.org/gstreamer/orc Package: libp11-kit0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1397 Maintainer: Debian GnuTLS Maintainers Architecture: arm64 Multi-Arch: same Source: p11-kit Version: 0.23.15-2+deb10u1 Depends: libc6 (>= 2.26), libffi6 (>= 3.2) Breaks: opencryptoki (<= 3.6.1+dfsg-1) Description: library for loading and coordinating access to PKCS#11 modules - runtime The p11-kit library provides a way to load and enumerate Public-Key Cryptography Standard #11 modules, along with a standard configuration setup for installing PKCS#11 modules so that they're discoverable. It also solves problems with coordinating the use of PKCS#11 by different components or libraries living in the same process. . This package contains the shared library required for applications loading and accessing PKCS#11 modules. Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html Package: libpam-modules Status: install ok installed Priority: required Section: admin Installed-Size: 862 Maintainer: Steve Langasek Architecture: arm64 Multi-Arch: same Source: pam Version: 1.3.1-5 Replaces: libpam-umask, libpam0g-util Provides: libpam-mkhomedir, libpam-motd, libpam-umask Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.27), libdb5.3, libpam0g (>= 1.3.1), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.3.1-5) Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask Conffiles: /etc/security/access.conf dc21d0fd769d655b311d785670e5c6ae /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36 /etc/security/limits.conf 38dce56af34daf316b901d465769a137 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89 /etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192 Description: Pluggable Authentication Modules for PAM This package completes the set of modules for PAM. It includes the pam_unix.so module as well as some specialty modules. Homepage: http://www.linux-pam.org/ Package: libpam-modules-bin Status: install ok installed Priority: required Section: admin Installed-Size: 226 Maintainer: Steve Langasek Architecture: arm64 Multi-Arch: foreign Source: pam Version: 1.3.1-5 Replaces: libpam-modules (<< 1.1.3-8) Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32) Description: Pluggable Authentication Modules for PAM - helper binaries This package contains helper binaries used by the standard set of PAM modules in the libpam-modules package. Homepage: http://www.linux-pam.org/ Package: libpam-runtime Status: install ok installed Priority: required Section: admin Installed-Size: 1072 Maintainer: Steve Langasek Architecture: all Multi-Arch: foreign Source: pam Version: 1.3.1-5 Replaces: libpam0g-dev, libpam0g-util Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6) Conflicts: libpam0g-util Conffiles: /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701 Description: Runtime support for the PAM library Contains configuration files and directories required for authentication to work on Debian systems. This package is required on almost all installations. Homepage: http://www.linux-pam.org/ Package: libpam-systemd Status: install ok installed Priority: standard Section: admin Installed-Size: 388 Maintainer: Debian systemd Maintainers Architecture: arm64 Multi-Arch: same Source: systemd Version: 241-7~deb10u10 Provides: default-logind (= 241-7~deb10u10), logind (= 241-7~deb10u10) Depends: libc6 (>= 2.28), libpam0g (>= 0.99.7.1), systemd (= 241-7~deb10u10), libpam-runtime (>= 1.0.1-6), dbus, systemd-sysv Description: system and service manager - PAM module This package contains the PAM module which registers user sessions in the systemd control group hierarchy for logind. . If in doubt, do install this package. . Packages that depend on logind functionality need to depend on libpam-systemd. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: libpam0g Status: install ok installed Priority: optional Section: libs Installed-Size: 236 Maintainer: Steve Langasek Architecture: arm64 Multi-Arch: same Source: pam Version: 1.3.1-5 Replaces: libpam0g-util Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0 Suggests: libpam-doc Description: Pluggable Authentication Modules library Contains the shared library for Linux-PAM, a library that enables the local system administrator to choose how applications authenticate users. In other words, without rewriting or recompiling a PAM-aware application, it is possible to switch between the authentication mechanism(s) it uses. One may entirely upgrade the local authentication system without touching the applications themselves. Homepage: http://www.linux-pam.org/ Package: libpango-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 404 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: pango1.0 Version: 1.42.4-8~deb10u1 Depends: fontconfig (>= 2.1.91), libc6 (>= 2.17), libfribidi0 (>= 1.0.0), libglib2.0-0 (>= 2.55.2), libthai0 (>= 0.1.25) Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Homepage: http://www.pango.org/ Package: libpangocairo-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 110 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: pango1.0 Version: 1.42.4-8~deb10u1 Depends: libc6 (>= 2.17), libcairo2 (>= 1.12.10), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.55.2), libpango-1.0-0 (>= 1.37.5), libpangoft2-1.0-0 (>= 1.28.1) Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Homepage: http://www.pango.org/ Package: libpangoft2-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 144 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: pango1.0 Version: 1.42.4-8~deb10u1 Depends: libc6 (>= 2.17), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.3.5), libglib2.0-0 (>= 2.55.2), libharfbuzz0b (>= 1.4.2), libpango-1.0-0 (>= 1.42.0) Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Homepage: http://www.pango.org/ Package: libpangomm-1.4-1v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 228 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: pangomm Version: 2.42.0-2 Replaces: libpangomm-1.4-1 Depends: libc6 (>= 2.17), libcairomm-1.0-1v5 (>= 1.12.0), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.24.0), libglibmm-2.4-1v5 (>= 2.54.0), libpango-1.0-0 (>= 1.42.0), libpangocairo-1.0-0 (>= 1.41.0), libsigc++-2.0-0v5 (>= 2.2.0), libstdc++6 (>= 5.2) Conflicts: libpangomm-1.4-1 Description: C++ Wrapper for pango (shared libraries) Pangomm is a C++ wrapper for the pango library. Originally part of gtkmm, pangomm provides convenient C++ interfaces for handling both the layout and internationalization of text in graphical applications. . This package contains the shared library. Homepage: http://gtkmm.org Package: libpangoxft-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 93 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: pango1.0 Version: 1.42.4-8~deb10u1 Depends: libc6 (>= 2.17), libfontconfig1 (>= 2.12.6), libglib2.0-0 (>= 2.55.2), libpango-1.0-0 (>= 1.22.0), libpangoft2-1.0-0 (>= 1.14.0), libx11-6, libxft2 (>> 2.1.1), libxrender1 Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Homepage: http://www.pango.org/ Package: libparted2 Status: install ok installed Priority: optional Section: libs Installed-Size: 504 Maintainer: Parted Maintainer Team Architecture: arm64 Multi-Arch: same Source: parted Version: 3.2-25 Provides: libparted Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.97), libuuid1 (>= 2.16) Suggests: parted, libparted-dev, libparted-i18n (= 3.2-25) Breaks: python-parted (<< 3.6-5) Description: disk partition manipulator - shared library GNU Parted is a program that allows you to create, destroy, resize, move, and copy disk partitions. This is useful for creating space for new operating systems, reorganizing disk usage, and copying data to new hard disks. . This package contains the shared library. Homepage: http://www.gnu.org/software/parted Package: libpcap0.8 Status: install ok installed Priority: optional Section: libs Installed-Size: 315 Maintainer: Romain Francoise Architecture: arm64 Multi-Arch: same Source: libpcap Version: 1.8.1-6+deb10u1 Replaces: libpcap0.8-dev (<< 1.0.0-2) Depends: libc6 (>= 2.17) Description: system interface for user-level packet capture libpcap (Packet CAPture) provides a portable framework for low-level network monitoring. Applications include network statistics collection, security monitoring, network debugging, etc. . Since almost every system vendor provides a different interface for packet capture, and since there are several tools that require this functionality, the libpcap authors created this system-independent API to ease in porting and to alleviate the need for several system-dependent packet capture modules in each application. Homepage: http://www.tcpdump.org/ Package: libpciaccess0 Status: install ok installed Priority: optional Section: libs Installed-Size: 86 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libpciaccess Version: 0.14-1 Depends: libc6 (>= 2.17), zlib1g (>= 1:1.1.4) Suggests: pciutils Description: Generic PCI access library for X Provides functionality for X to access the PCI bus and devices in a platform-independent way. Package: libpcre2-8-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 512 Maintainer: Matthew Vernon Architecture: arm64 Multi-Arch: same Source: pcre2 Version: 10.32-5+deb10u1 Depends: libc6 (>= 2.17) Description: New Perl Compatible Regular Expression Library- 8 bit runtime files This is PCRE2, the new implementation of PCRE, a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. New projects should use this library in preference to the older library, confusingly called pcre3 in Debian. . This package contains the 8 bit runtime library. Homepage: https://pcre.org/ Package: libpcre3 Status: install ok installed Priority: optional Section: libs Installed-Size: 605 Maintainer: Matthew Vernon Architecture: arm64 Multi-Arch: same Source: pcre3 Version: 2:8.39-12 Depends: libc6 (>= 2.17) Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~) Conflicts: libpcre3-dev (<= 4.3-3) Description: Old Perl 5 Compatible Regular Expression Library - runtime files This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . New packages should use the newer pcre2 packages, and existing packages should migrate to pcre2. . This package contains the runtime libraries. Package: libpcsclite1 Status: install ok installed Priority: optional Section: libs Installed-Size: 97 Maintainer: Ludovic Rousseau Architecture: arm64 Multi-Arch: same Source: pcsc-lite Version: 1.8.24-1 Depends: libc6 (>= 2.17) Suggests: pcscd (= 1.8.24-1) Breaks: libpcsclite-dev (<< 1.8.24-1), pcscd (<< 1.8.24-1) Description: Middleware to access a smart card using PC/SC (library) The purpose of PC/SC Lite is to provide a Windows(R) SCard interface in a very small form factor for communicating to smartcards and readers. . The PC/SC Lite library is used to connect to the PC/SC daemon from a client application and provide access to the desired reader. Homepage: https://pcsclite.apdu.fr/ Package: libperl5.28 Status: install ok installed Priority: optional Section: libs Installed-Size: 25801 Maintainer: Niko Tyni Architecture: arm64 Multi-Arch: same Source: perl Version: 5.28.1-6+deb10u1 Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.074), libcompress-raw-zlib-perl (<< 2.076), libcompress-zlib-perl (<< 2.074), libdigest-md5-perl (<< 2.55), libdigest-sha-perl (<< 6.01), libencode-perl (<< 2.97), libio-compress-base-perl (<< 2.074), libio-compress-bzip2-perl (<< 2.074), libio-compress-perl (<< 2.074), libio-compress-zlib-perl (<< 2.074), libmime-base64-perl (<< 3.15), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 3.08), libsys-syslog-perl (<< 0.35), libthreads-perl (<< 2.22), libthreads-shared-perl (<< 1.58), libtime-hires-perl (<< 1.9759), libtime-piece-perl (<< 1.3204), perl (<< 5.22.0~), perl-base (<< 5.22.0~) Depends: libbz2-1.0, libc6 (>= 2.28), libdb5.3, libgdbm-compat4 (>= 1.18-3), libgdbm6 (>= 1.18-3), zlib1g (>= 1:1.2.2.3), perl-modules-5.28 (>= 5.28.1-6+deb10u1) Suggests: sensible-utils Breaks: libcompress-raw-bzip2-perl (<< 2.074), libcompress-raw-zlib-perl (<< 2.076), libcompress-zlib-perl (<< 2.074), libdigest-md5-perl (<< 2.55), libdigest-sha-perl (<< 6.01), libencode-perl (<< 2.97), libfilter-perl (<< 1.58), libio-compress-base-perl (<< 2.074), libio-compress-bzip2-perl (<< 2.074), libio-compress-perl (<< 2.074), libio-compress-zlib-perl (<< 2.074), libmime-base64-perl (<< 3.15), libstorable-perl (<< 3.08), libsys-syslog-perl (<< 0.35), libthreads-perl (<< 2.22), libthreads-shared-perl (<< 1.58), libtime-hires-perl (<< 1.9759), libtime-piece-perl (<< 1.3204) Description: shared Perl library This package contains the shared Perl library, used by applications which embed a Perl interpreter. . It also contains the architecture-dependent parts of the standard library (and depends on perl-modules-5.28 which contains the architecture-independent parts). Homepage: http://dev.perl.org/perl5/ Package: libpipeline1 Status: install ok installed Priority: optional Section: libs Installed-Size: 81 Maintainer: Colin Watson Architecture: arm64 Multi-Arch: same Source: libpipeline Version: 1.5.1-2 Depends: libc6 (>= 2.17) Description: pipeline manipulation library This is a C library for setting up and running pipelines of processes, without needing to involve shell command-line parsing which is often error-prone and insecure. Homepage: https://nongnu.org/libpipeline/ Package: libpixman-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 407 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: pixman Version: 0.36.0-1+deb10u1 Depends: libc6 (>= 2.17) Description: pixel-manipulation library for X and cairo A library for manipulating pixel regions -- a set of Y-X banded rectangles, image compositing using the Porter/Duff model and implicit mask generation for geometric primitives including trapezoids, triangles, and rectangles. Homepage: http://pixman.org/ Package: libplist3 Status: install ok installed Priority: optional Section: libs Installed-Size: 79 Maintainer: gtkpod Maintainers Architecture: arm64 Multi-Arch: same Source: libplist Version: 2.0.1~git20190104.3f96731-1 Depends: libc6 (>= 2.17) Description: Library for handling Apple binary and XML property lists libplist is a library for reading and writing the Apple binary and XML property lists format. It's part of the libimobiledevice stack, providing access to iDevices (iPod, iPhone, iPad ...). Homepage: https://www.libimobiledevice.org/ Package: libpng16-16 Status: install ok installed Priority: optional Section: libs Installed-Size: 427 Maintainer: Maintainers of libpng1.6 packages Architecture: arm64 Multi-Arch: same Source: libpng1.6 Version: 1.6.36-6 Depends: libc6 (>= 2.17), zlib1g (>= 1:1.2.11.dfsg) Description: PNG library - runtime (version 1.6) libpng is a library implementing an interface for reading and writing PNG (Portable Network Graphics) format files. . This package contains the runtime library files needed to run software using libpng. Homepage: http://libpng.org/pub/png/libpng.html Package: libpolkit-agent-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 69 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: policykit-1 Version: 0.105-25+deb10u1 Depends: libc6 (>= 2.17), libexpat1 (>= 2.0.1), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (= 0.105-25+deb10u1) Description: PolicyKit Authentication Agent API PolicyKit is a toolkit for defining and handling the policy that allows unprivileged processes to speak to privileged processes. . This package contains a library for accessing the authentication agent. Homepage: https://www.freedesktop.org/wiki/Software/polkit/ Package: libpolkit-backend-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 132 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: policykit-1 Version: 0.105-25+deb10u1 Depends: libc6 (>= 2.17), libexpat1 (>= 2.0.1), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (= 0.105-25+deb10u1), libsystemd0 (>= 213) Description: PolicyKit backend API PolicyKit is a toolkit for defining and handling the policy that allows unprivileged processes to speak to privileged processes. . This package contains a library for implementing authentication backends. Homepage: https://www.freedesktop.org/wiki/Software/polkit/ Package: libpolkit-gobject-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 155 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: policykit-1 Version: 0.105-25+deb10u1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), libsystemd0 (>= 213) Description: PolicyKit Authorization API PolicyKit is a toolkit for defining and handling the policy that allows unprivileged processes to speak to privileged processes. . This package contains a library for accessing PolicyKit. Homepage: https://www.freedesktop.org/wiki/Software/polkit/ Package: libpoppler-glib8 Status: hold ok installed Priority: optional Section: libs Installed-Size: 418 Maintainer: Debian freedesktop.org maintainers Architecture: arm64 Multi-Arch: same Source: poppler Version: 0.71.0-5+deb10u1 Depends: libpoppler82 (= 0.71.0-5+deb10u1), libc6 (>= 2.17), libcairo2 (>= 1.12.0), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.41), libstdc++6 (>= 5.2) Description: PDF rendering library (GLib-based shared library) Poppler is a PDF rendering library based on Xpdf PDF viewer. . This package provides the GLib-based shared library for applications using the GLib interface to Poppler. Homepage: http://poppler.freedesktop.org/ Package: libpoppler82 Status: hold ok installed Priority: optional Section: libs Installed-Size: 3552 Maintainer: Debian freedesktop.org maintainers Architecture: arm64 Multi-Arch: same Source: poppler Version: 0.71.0-5+deb10u1 Depends: libc6 (>= 2.17), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgcc1 (>= 1:4.2), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.16), libopenjp2-7 (>= 2.0.0), libpng16-16 (>= 1.6.2-1), libstdc++6 (>= 5.2), libtiff5 (>= 4.0.3), zlib1g (>= 1:1.1.4) Recommends: poppler-data Description: PDF rendering library Poppler is a PDF rendering library based on Xpdf PDF viewer. . This package contains the shared core library. Homepage: http://poppler.freedesktop.org/ Package: libpopt0 Status: install ok installed Priority: optional Section: libs Installed-Size: 222 Maintainer: Michael Jeanson Architecture: arm64 Multi-Arch: same Source: popt Version: 1.16-12 Replaces: popt Depends: libc6 (>= 2.27) Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3) Description: lib for parsing cmdline parameters Popt was heavily influenced by the getopt() and getopt_long() functions, but it allows more powerful argument expansion. It can parse arbitrary argv[] style arrays and automatically set variables based on command line arguments. It also allows command line arguments to be aliased via configuration files and includes utility functions for parsing arbitrary strings into argv[] arrays using shell-like rules. . This package contains the runtime library and locale data. Homepage: http://rpm5.org/ Package: libprocps7 Status: install ok installed Priority: optional Section: libs Installed-Size: 117 Maintainer: Craig Small Architecture: arm64 Multi-Arch: same Source: procps Version: 2:3.3.15-2 Replaces: procps (<< 1:3.3.2-1) Depends: libc6 (>= 2.17), libsystemd0 (>= 209) Description: library for accessing process information from /proc The libprocps library is a way of accessing information out of the /proc filesystem. . This package contains the shared libraries necessary to run programs compiled with libprocps. Homepage: https://gitlab.com/procps-ng/procps Package: libproxy1v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 146 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libproxy Version: 0.4.15-5+deb10u1 Replaces: libproxy1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Conflicts: libproxy1 Description: automatic proxy configuration management library (shared) libproxy is a lightweight library which makes it easy to develop applications proxy-aware with a simple and stable API. . This package contains the shared library. Homepage: https://libproxy.github.io/libproxy/ Package: libpsl5 Status: install ok installed Priority: optional Section: libs Installed-Size: 86 Maintainer: Tim Rühsen Architecture: arm64 Multi-Arch: same Source: libpsl Version: 0.20.2-2 Depends: libidn2-0 (>= 0.16), libc6 (>= 2.17), libunistring2 (>= 0.9.7) Recommends: publicsuffix (>= 20150507) Description: Library for Public Suffix List (shared libraries) Libpsl allows checking domains against the Public Suffix List. It can be used to avoid privacy-leaking 'super-cookies', 'super domain' certificates, for domain highlighting purposes sorting domain lists by site and more. . Please see https://publicsuffix.org for more detailed information. . This package contains runtime libraries. Homepage: https://github.com/rockdaboot/libpsl Package: libpulse-mainloop-glib0 Status: hold ok installed Priority: optional Section: sound Installed-Size: 52 Maintainer: Pulseaudio maintenance team Architecture: arm64 Multi-Arch: same Source: pulseaudio Version: 13.99.3-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.16.0), libpulse0 (>= 13.99.3) Description: PulseAudio client libraries (glib support) PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . Client libraries used by applications that access a PulseAudio sound server via PulseAudio's native interface. . This package adds support for glib2 client applications. Homepage: https://www.pulseaudio.org Package: libpulse0 Status: hold ok installed Priority: optional Section: libs Installed-Size: 866 Maintainer: Pulseaudio maintenance team Architecture: arm64 Multi-Arch: same Source: pulseaudio Version: 13.99.3-1 Depends: libasyncns0 (>= 0.3), libc6 (>= 2.27), libdbus-1-3 (>= 1.9.14), libice6 (>= 1:1.0.0), libsm6, libsndfile1 (>= 1.0.20), libsystemd0, libwrap0 (>= 7.6-4~), libx11-6, libx11-xcb1, libxcb1, libxtst6 Suggests: pulseaudio Conffiles: /etc/pulse/client.conf 16bb1fd7704eae3f0e7dde080b83e197 /etc/pulse/client.conf.d/00-disable-autospawn.conf c26985bcc518c73f813dbe4de967ecf3 obsolete Description: PulseAudio client libraries PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . Client libraries used by applications that access a PulseAudio sound server via PulseAudio's native interface. Homepage: https://www.pulseaudio.org Package: libpulsedsp Status: hold ok installed Priority: optional Section: sound Installed-Size: 78 Maintainer: Pulseaudio maintenance team Architecture: arm64 Multi-Arch: same Source: pulseaudio Version: 13.99.3-1 Depends: libc6 (>= 2.17), libpulse0 (>= 13.99.3) Description: PulseAudio OSS pre-load library PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . This package provides the pre-load library used to redirect applications using OSS through pulseaudio. Homepage: https://www.pulseaudio.org Package: libpython2.7-minimal Status: deinstall ok config-files Priority: optional Section: python Installed-Size: 2781 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: same Source: python2.7 Version: 2.7.16-2+deb10u1 Config-Version: 2.7.16-2+deb10u1 Replaces: libpython2.7-stdlib (<< 2.7.8-7), python2.7 (<< 2.7.4-2), python2.7-minimal (<< 2.7.3-10) Recommends: libpython2.7-stdlib Breaks: python2.7-minimal (<< 2.7.4~rc1-1~) Conflicts: binfmt-support (<< 1.1.2) Conffiles: /etc/python2.7/sitecustomize.py d6b276695157bde06a56ba1b2bc53670 Description: Minimal subset of the Python language (version 2.7) This package contains some essential modules. It is normally not used on it's own, but as a dependency of python2.7-minimal. Package: libpython3-stdlib Status: install ok installed Priority: optional Section: python Installed-Size: 37 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: same Source: python3-defaults Version: 3.7.3-1 Depends: libpython3.7-stdlib (>= 3.7.3-1~) Description: interactive high-level object-oriented language (default python3 version) Python, the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package is a dependency package, which depends on Debian's default Python 3 version (currently v3.7). Homepage: https://www.python.org/ Package: libpython3.7 Status: install ok installed Priority: optional Section: libs Installed-Size: 5007 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: same Source: python3.7 Version: 3.7.3-2+deb10u7 Depends: libpython3.7-stdlib (= 3.7.3-2+deb10u7), libc6 (>= 2.28), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0) Description: Shared Python runtime library (version 3.7) Python is a high-level, interactive, object-oriented language. Its 3.7 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the shared runtime library, normally not needed for programs using the statically linked interpreter. Package: libpython3.7-minimal Status: install ok installed Priority: optional Section: python Installed-Size: 3906 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: same Source: python3.7 Version: 3.7.3-2+deb10u7 Depends: libc6 (>= 2.17), libssl1.1 (>= 1.1.1) Recommends: libpython3.7-stdlib Breaks: libpython3.7-stdlib (<< 3.7.0~b2-1~) Conflicts: binfmt-support (<< 1.1.2), libpython3.7-stdlib (<< 3.7.0~b2-1~) Conffiles: /etc/python3.7/sitecustomize.py d6b276695157bde06a56ba1b2bc53670 Description: Minimal subset of the Python language (version 3.7) This package contains some essential modules. It is normally not used on it's own, but as a dependency of python3.7-minimal. Package: libpython3.7-stdlib Status: install ok installed Priority: optional Section: python Installed-Size: 7937 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: same Source: python3.7 Version: 3.7.3-2+deb10u7 Replaces: libpython3.7-testsuite (<< 3.7.2-3), python3-distutils (<< 3.6.5~rc1-2) Depends: libpython3.7-minimal (= 3.7.3-2+deb10u7), mime-support, libbz2-1.0, libc6 (>= 2.28), libdb5.3, libffi6 (>= 3.2), liblzma5 (>= 5.1.1alpha+20120614), libmpdec2, libncursesw6 (>= 6), libreadline7 (>= 7.0~beta), libsqlite3-0 (>= 3.7.15), libtinfo6 (>= 6), libuuid1 (>= 2.20.1) Breaks: libmpdec2 (<< 2.4.2), libpython3.7-testsuite (<< 3.7.2-3), python3-distutils (<< 3.6.5~rc1-2), python3-tk (<< 3.6.4~rc1-2) Description: Interactive high-level object-oriented language (standard library, version 3.7) Python is a high-level, interactive, object-oriented language. Its 3.7 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains Python 3.7's standard library. It is normally not used on its own, but as a dependency of python3.7. Package: libqt5core5a Status: deinstall ok config-files Priority: optional Section: libs Installed-Size: 5568 Maintainer: Debian Qt/KDE Maintainers Architecture: arm64 Multi-Arch: same Source: qtbase-opensource-src Version: 5.11.3+dfsg1-1+deb10u5 Config-Version: 5.11.3+dfsg1-1+deb10u5 Provides: qtbase-abi-5-11-3 Depends: libc6 (>= 2.28), libdouble-conversion1 (>= 2.0.0), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.22.0), libicu63 (>= 63.1-1~), libpcre2-16-0 (>= 10.32), libstdc++6 (>= 5), zlib1g (>= 1:1.1.4) Recommends: qttranslations5-l10n Suggests: libthai0 Breaks: libqt5scintilla2-12v5 (<< 2.9.2+dfsg-2~) Description: Qt 5 core module Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality. . The QtCore module contains core non-GUI functionality. Homepage: http://qt-project.org/ Package: libqt5gui5 Status: deinstall ok config-files Priority: optional Section: libs Installed-Size: 11078 Maintainer: Debian Qt/KDE Maintainers Architecture: arm64 Multi-Arch: same Source: qtbase-opensource-src Version: 5.11.3+dfsg1-1+deb10u5 Config-Version: 5.11.3+dfsg1-1+deb10u5 Replaces: libqt5egldeviceintegration5 (<< 5.6.0~beta+dfsg-5~), libqt5xcbqpa5 (<< 5.6.0~beta+dfsg-5~) Depends: fontconfig, libc6 (>= 2.17), libdrm2 (>= 2.4.47), libegl1, libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.6), libgbm1 (>= 8.1~0), libgl1, libharfbuzz0b (>= 1.6.0~), libice6 (>= 1:1.0.0), libinput10 (>= 0.15.0), libjpeg62-turbo (>= 1.3.1), libmtdev1 (>= 1.0.8), libpng16-16 (>= 1.6.2-1), libqt5core5a (>= 5.11.0~rc1), libqt5dbus5 (>= 5.0.2), libqt5network5 (>= 5.0.2), libsm6, libstdc++6 (>= 5), libudev1 (>= 183), libx11-6, libx11-xcb1, libxcb-glx0, libxcb-icccm4 (>= 0.4.1), libxcb-image0 (>= 0.2.1), libxcb-keysyms1 (>= 0.4.0), libxcb-randr0 (>= 1.3), libxcb-render-util0, libxcb-render0, libxcb-shape0, libxcb-shm0 (>= 1.10), libxcb-sync1, libxcb-xfixes0, libxcb-xinerama0, libxcb-xkb1, libxcb1 (>= 1.8), libxi6 (>= 2:1.5.99.2), libxkbcommon-x11-0 (>= 0.5.0), libxkbcommon0 (>= 0.5.0), libxrender1, qtbase-abi-5-11-3, zlib1g (>= 1:1.1.4) Recommends: libqt5svg5, qt5-gtk-platformtheme Suggests: qt5-image-formats-plugins, qtwayland5 Breaks: libqt5egldeviceintegration5 (<< 5.6.0~beta+dfsg-5~), libqt5xcbqpa5 (<< 5.6.0~beta+dfsg-5~) Description: Qt 5 GUI module Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality. . The QtGui module extends QtCore with GUI functionality. Homepage: http://qt-project.org/ Package: libraw1394-11 Status: install ok installed Priority: optional Section: libs Installed-Size: 99 Maintainer: Guus Sliepen Architecture: arm64 Multi-Arch: same Source: libraw1394 (2.1.2-1) Version: 2.1.2-1+b1 Depends: libc6 (>= 2.17) Suggests: libraw1394-doc Description: library for direct access to IEEE 1394 bus (aka FireWire) libraw1394 is the only supported interface to the kernel side raw1394 of the Linux IEEE-1394 subsystem, which provides direct access to the connected 1394 buses to user space. Through libraw1394/raw1394, applications can directly send to and receive from other nodes without requiring a kernel driver for the protocol in question. Homepage: https://ieee1394.wiki.kernel.org/ Package: libreadline7 Status: install ok installed Priority: optional Section: libs Installed-Size: 400 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: same Source: readline Version: 7.0-5 Depends: readline-common, libc6 (>= 2.17), libtinfo6 (>= 6) Description: GNU readline and history libraries, run-time libraries The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Package: librest-0.7-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 115 Maintainer: Ying-Chun Liu (PaulLiu) Architecture: arm64 Multi-Arch: same Source: librest Version: 0.8.1-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), libsoup-gnome2.4-1 (>= 2.27.4), libsoup2.4-1 (>= 2.30), libxml2 (>= 2.7.4) Description: REST service access library This library was designed to make it easier to access web services that claim to be "RESTful". It includes convenience wrappers for libsoup and libxml to ease remote use of the RESTful API. Homepage: https://wiki.gnome.org/Projects/Librest Package: librga2 Status: install ok installed Priority: optional Section: libs Installed-Size: 110 Maintainer: Putin Lee Architecture: arm64 Source: librga Version: 2.1.0-1 Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.38), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Description: Userspace interface to Rockchip RGA 2D accelerator Homepage: https://github.com/rockchip-linux/linux-rga Package: librockchip-mpp1 Status: hold ok installed Priority: optional Section: libs Installed-Size: 1703 Maintainer: Randy Li Architecture: arm64 Source: mpp Version: 1.5.0-1 Depends: libc6 (>= 2.28), libgcc1 (>= 1:3.0), libstdc++6 (>= 5) Description: Media Process Platform Homepage: http://www.rock-chips.com Package: librockchip-vpu0 Status: hold ok installed Priority: optional Section: libs Installed-Size: 85 Maintainer: Randy Li Architecture: arm64 Source: mpp Version: 1.5.0-1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), librockchip-mpp1, libstdc++6 (>= 5) Description: Media Process Platform Homepage: http://www.rock-chips.com Package: librsvg2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 4772 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: librsvg Version: 2.44.10-2.1+deb10u3 Depends: libc6 (>= 2.18), libcairo2 (>= 1.15.8), libcroco3 (>= 0.6.2), libfontconfig1 (>= 2.12.6), libgcc1 (>= 1:4.2), libgdk-pixbuf2.0-0 (>= 2.25.2), libglib2.0-0 (>= 2.37.3), libpango-1.0-0 (>= 1.38.0), libpangocairo-1.0-0 (>= 1.38.0), libpangoft2-1.0-0 (>= 1.38.0), libxml2 (>= 2.8.0) Recommends: librsvg2-common Suggests: librsvg2-bin Description: SAX-based renderer library for SVG files (runtime) The rsvg library is an efficient renderer for Scalable Vector Graphics (SVG) pictures. . This package contains the runtime library, necessary to run applications using librsvg. Homepage: https://wiki.gnome.org/Projects/LibRsvg Package: librsvg2-common Status: install ok installed Priority: optional Section: libs Installed-Size: 56 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: librsvg Version: 2.44.10-2.1+deb10u3 Depends: librsvg2-2 (= 2.44.10-2.1+deb10u3), libgdk-pixbuf2.0-0 (>= 2.23.5-2), libglib2.0-0 (>= 2.24.0) Description: SAX-based renderer library for SVG files (extra runtime) The rsvg library is an efficient renderer for Scalable Vector Graphics (SVG) pictures. . This package includes the gdk-pixbuf loader allowing to load SVG images transparently inside GTK+ applications. Homepage: https://wiki.gnome.org/Projects/LibRsvg Package: librtmp1 Status: install ok installed Priority: optional Section: libs Installed-Size: 133 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: rtmpdump Version: 2.4+20151223.gitfa8646d.1-2 Depends: libc6 (>= 2.17), libgmp10, libgnutls30 (>= 3.5.6), libhogweed4, libnettle6, zlib1g (>= 1:1.1.4) Description: toolkit for RTMP streams (shared library) A small dumper for media content streamed over the RTMP protocol (like BBC's iPlayer high quality streams). Supplying an RTMP URL will result in a dumped flv file, which can be played/transcoded with standard tools. . This package contains the shared libraries, header files needed by programs that want to use librtmp. Homepage: http://rtmpdump.mplayerhq.hu/ Package: libsamplerate0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1477 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libsamplerate Version: 0.1.9-2 Replaces: samplerate-programs (<< 0.1.8-3) Depends: libc6 (>= 2.17) Description: Audio sample rate conversion library libsamplerate (aka Secret Rabbit Code) is a library for audio rate conversion. . libsamplerate currently provides three different sample rate conversion algorithms; zero order hold, linear interpolation and FIR filter interpolation (using filters derived from the mathematical SINC function). The first two algorithms (zero order hold and linear) are included for completeness and are not recommended for any application where high quality sample rate conversion is required. For the FIR/Sinc algorithm, three converters are provided; SRC_SINC_FASTEST, SRC_SINC_MEDIUM_QUALITY and SRC_SINC_BEST_QUALITY to allow a trade off between conversion speed and conversion quality. . libsamplerate is capable of downsampling to 1/256 of the original sample rate and upsampling to 256 times the original sample rate. It is also capable of time varying conversions for vary speed effects and synchronising of two unlocked sample rates. Homepage: http://www.mega-nerd.com/SRC/ Package: libsasl2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 184 Maintainer: Debian Cyrus Team Architecture: arm64 Multi-Arch: same Source: cyrus-sasl2 Version: 2.1.27+dfsg-1+deb10u2 Replaces: libsasl2 Depends: libsasl2-modules-db (>= 2.1.27+dfsg-1+deb10u2), libc6 (>= 2.17) Recommends: libsasl2-modules (>= 2.1.27+dfsg-1+deb10u2) Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3) Description: Cyrus SASL - authentication abstraction library This is the Cyrus SASL API implementation, version 2.1. . SASL is the Simple Authentication and Security Layer, a method for adding authentication support to connection-based protocols. To use SASL, a protocol includes a command for identifying and authenticating a user to a server and for optionally negotiating protection of subsequent protocol interactions. If its use is negotiated, a security layer is inserted between the protocol and the connection. See RFC 2222 for more information. . Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used. Homepage: https://www.cyrusimap.org/sasl/ Package: libsasl2-modules-db Status: install ok installed Priority: optional Section: libs Installed-Size: 97 Maintainer: Debian Cyrus Team Architecture: arm64 Multi-Arch: same Source: cyrus-sasl2 Version: 2.1.27+dfsg-1+deb10u2 Depends: libc6 (>= 2.17), libdb5.3 Description: Cyrus SASL - pluggable authentication modules (DB) This is the Cyrus SASL API implementation, version 2.1. See package libsasl2-2 and RFC 2222 for more information. . This package provides the DB plugin, which supports Berkeley DB lookups. Homepage: https://www.cyrusimap.org/sasl/ Package: libsbc1 Status: install ok installed Priority: optional Section: libs Installed-Size: 78 Maintainer: Debian Bluetooth Maintainers Architecture: arm64 Multi-Arch: same Source: sbc Version: 1.4-1 Depends: libc6 (>= 2.17) Description: Sub Band CODEC library - runtime This provides the library and tool which operate SBC (sub band codec) in A2DP (the Advanced Audio Distribution Profile). . This package contains the sbc runtime library. Homepage: http://www.bluez.org/ Package: libseccomp2 Status: install ok installed Priority: optional Section: libs Installed-Size: 302 Maintainer: Kees Cook Architecture: arm64 Multi-Arch: same Source: libseccomp Version: 2.3.3-4 Depends: libc6 (>= 2.17) Description: high level interface to Linux seccomp filter This library provides a high level interface to constructing, analyzing and installing seccomp filters via a BPF passed to the Linux Kernel's prctl() syscall. Homepage: https://github.com/seccomp/libseccomp Package: libsecret-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 368 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libsecret Version: 0.18.7-1 Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libglib2.0-0 (>= 2.38.0), libsecret-common Breaks: seahorse (<< 3.10) Description: Secret store Library for storing and retrieving passwords and other secrets. It communicates with the "Secret Service" using DBus. Homepage: https://wiki.gnome.org/Projects/Libsecret Package: libsecret-common Status: install ok installed Priority: optional Section: libs Installed-Size: 226 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: libsecret Version: 0.18.7-1 Description: Secret store (common files) Library for storing and retrieving passwords and other secrets. It communicates with the "Secret Service" using DBus. . This package contains data files used by the libsecret library. Homepage: https://wiki.gnome.org/Projects/Libsecret Package: libselinux1 Status: install ok installed Priority: optional Section: libs Installed-Size: 178 Maintainer: Debian SELinux maintainers Architecture: arm64 Multi-Arch: same Source: libselinux (2.8-1) Version: 2.8-1+b1 Depends: libc6 (>= 2.17), libpcre3 Description: SELinux runtime shared libraries This package provides the shared libraries for Security-enhanced Linux that provides interfaces (e.g. library functions for the SELinux kernel APIs like getcon(), other support functions like getseuserbyname()) to SELinux-aware applications. Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. . libselinux1 provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API. libselinux may use the shared libsepol to manipulate the binary policy if necessary (e.g. to downgrade the policy format to an older version supported by the kernel) when loading policy. Homepage: http://userspace.selinuxproject.org/ Package: libsemanage-common Status: install ok installed Priority: optional Section: libs Installed-Size: 30 Maintainer: Debian SELinux maintainers Architecture: all Multi-Arch: foreign Source: libsemanage Version: 2.8-2 Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~) Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~) Conffiles: /etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932 Description: Common files for SELinux policy management libraries This package provides the common files used by the shared libraries for SELinux policy management. . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: http://userspace.selinuxproject.org/ Package: libsemanage1 Status: install ok installed Priority: optional Section: libs Installed-Size: 293 Maintainer: Debian SELinux maintainers Architecture: arm64 Multi-Arch: same Source: libsemanage Version: 2.8-2 Depends: libsemanage-common (= 2.8-2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.17), libselinux1 (>= 2.8), libsepol1 (>= 2.8) Breaks: policycoreutils (<< 2.4), selinux-policy-default (<< 2:2.20140421-10~), selinux-policy-mls (<< 2:2.20140421-10~) Description: SELinux policy management library This package provides the shared libraries for SELinux policy management. It uses libsepol for binary policy manipulation and libselinux for interacting with the SELinux system. It also exec's helper programs for loading policy and for checking whether the file_contexts configuration is valid (load_policy and setfiles from policycoreutils) presently, although this may change at least for the bootstrapping case . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: http://userspace.selinuxproject.org/ Package: libsensors-config Status: install ok installed Priority: optional Section: utils Installed-Size: 50 Maintainer: Aurelien Jarno Architecture: all Multi-Arch: foreign Source: lm-sensors Version: 1:3.5.0-3 Replaces: libsensors4 Suggests: lm-sensors Breaks: libsensors4 Conffiles: /etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e /etc/sensors3.conf 41bd2b70a6ce64a21c2d1f70b9eed091 Description: lm-sensors configuration files Lm-sensors is a hardware health monitoring package for Linux. It allows you to access information from temperature, voltage, and fan speed sensors. It works with most newer systems. . This library is only functional with a Linux kernel, it is provided on non-Linux systems for portability reasons only. . This package contains the configuration files. Homepage: https://hwmon.wiki.kernel.org/lm_sensors Package: libsensors5 Status: install ok installed Priority: optional Section: libs Installed-Size: 108 Maintainer: Aurelien Jarno Architecture: arm64 Multi-Arch: same Source: lm-sensors Version: 1:3.5.0-3 Depends: libsensors-config, libc6 (>= 2.17) Suggests: lm-sensors Description: library to read temperature/voltage/fan sensors Lm-sensors is a hardware health monitoring package for Linux. It allows you to access information from temperature, voltage, and fan speed sensors. It works with most newer systems. . This library is only functional with a Linux kernel, it is provided on non-Linux systems for portability reasons only. . This package contains a shared library for querying lm-sensors. Homepage: https://hwmon.wiki.kernel.org/lm_sensors Package: libsepol1 Status: install ok installed Priority: optional Section: libs Installed-Size: 652 Maintainer: Debian SELinux maintainers Architecture: arm64 Multi-Arch: same Source: libsepol Version: 2.8-1 Depends: libc6 (>= 2.17) Description: SELinux library for manipulating binary security policies Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement®, Role-based Access Control, and Multi-level Security. . libsepol provides an API for the manipulation of SELinux binary policies. It is used by checkpolicy (the policy compiler) and similar tools, as well as by programs like load_policy that need to perform specific transformations on binary policies such as customizing policy boolean settings. Homepage: http://userspace.selinuxproject.org/ Package: libserd-0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 96 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: serd Version: 0.28.0~dfsg0-1 Depends: libc6 (>= 2.17) Suggests: serdi Description: lightweight RDF syntax library Serd is a lightweight C library for RDF syntax which supports reading and writing Turtle and NTriples. . Serd is not intended to be a swiss-army knife of RDF syntax, but rather is suited to resource limited applications, or situations where a simple reader/writer with minimal dependencies is ideal (e.g. in LV2 hosts or plugins). . Serd is: * small: Serd is implemented in under 2500 lines1 of standard C code. * portable and dependency-free: Serd uses only the C standard library, and has no external dependencies, making it a lightweight dependency in every sense. * fast and lightweight: Serd (and the included serdi tool) can be used to stream abbreviated Turtle (unlike many other tools which can not stream since they must first build an internal model to abbreviate). In other words, Serd can re-serialise an unbounded amount of Turtle using a fixed amount of memory, preserving the abbreviations in the input. * conformant and well-tested: Serd is written to the Turtle, NTriples and URI specifications, and includes a comprehensive test suite which includes all the normative examples from the Turtle specification, all the "normal" examples from the URI specification, and additional tests added specifically for Serd. The test suite has over 96% code coverage (by line), and runs with zero memory errors or leaks. Homepage: http://drobilla.net/software/serd/ Package: libshine3 Status: install ok installed Priority: optional Section: libs Installed-Size: 56 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: shine Version: 3.1.1-2 Depends: libc6 (>= 2.17) Description: Fixed-point MP3 encoding library - runtime files Shine can be used to encode audio data on architectures with no floating point processing unit (FPU) at a much better rate than encoding libraries implemented using floating-point arithmetic. . This package contains the files needed to run a program compiled using Shine. Homepage: https://github.com/savonet/shine Package: libshout3 Status: install ok installed Priority: optional Section: libs Installed-Size: 123 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libshout Version: 2.4.1-2 Depends: libc6 (>= 2.17), libogg0 (>= 1.0rc3), libspeex1 (>= 1.2~beta3-1), libssl1.1 (>= 1.1.0), libtheora0 (>= 0.0.0.alpha7.dfsg), libvorbis0a (>= 1.1.2) Description: MP3/Ogg Vorbis broadcast streaming library A library for communicating with and sending data to Icecast and Icecast 2 streaming audio servers. It handles the socket connection, the timing of the data transmission, and prevents bad data from getting to the server. Homepage: http://www.icecast.org/ Package: libsidplay1v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 250 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Multi-Arch: same Source: libsidplay Version: 1.36.59-11 Replaces: libsidplay1, libsidplay1-c102 (<= 1.36.59-2), libsidplay1.36 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Suggests: sidplay-base Conflicts: libsidplay1, libsidplay1-c102 (<= 1.36.59-2), libsidplay1.36, sidplay (<= 1.36.36) Description: SID (MOS 6581) emulation library This is a (shared) library that implements the emulation of the C64's SID chip (MOS 6581) and CPU (6510). It is used by several "player" applications, e.g. sidplay, which make it possible to listen to *really* a lot (13.600+) of tunes, known from old and new C64 programs (as well as Amiga compositions). Find most of the available musics from your favourite games or demos and more in the High Voltage SID Collection (HVSC). For downloads and information about the volunteers, who maintain the collection, look at the HVSC homepage http://www.hvsc.c64.org. Package: libsigc++-2.0-0v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 100 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libsigc++-2.0 Version: 2.10.1-2 Replaces: libsigc++-2.0-0c2a Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5) Conflicts: libsigc++-2.0-0c2a Description: type-safe Signal Framework for C++ - runtime This library implements a full callback system for use in widget libraries, abstract interfaces, and general programming. It provides the ability to connect an abstract callback to a class method, function, or function object, and contains adaptor classes for the connection of dissimilar callbacks. . These are the runtime files for libsigc++, needed only if you wish to run software which depends on it. Homepage: https://libsigcplusplus.github.io/libsigcplusplus/ Package: libsigsegv2 Status: install ok installed Priority: optional Section: libs Installed-Size: 55 Maintainer: Debian Common Lisp Team Architecture: arm64 Multi-Arch: same Source: libsigsegv Version: 2.12-2 Depends: libc6 (>= 2.17) Description: Library for handling page faults in a portable way GNU libsigsegv is a library that allows handling page faults in a portable way. It is used e.g. for generational garbage collectors and stack overflow handlers. . This package contains the shared library. Homepage: https://www.gnu.org/software/libsigsegv/ Package: libslang2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1742 Maintainer: Alastair McKinstry Architecture: arm64 Multi-Arch: same Source: slang2 Version: 2.3.2-2 Depends: libc6 (>= 2.17) Description: S-Lang programming library - runtime version S-Lang is a C programmer's library that includes routines for the rapid development of sophisticated, user friendly, multi-platform applications. . This package contains only the shared library libslang.so.* and copyright information. It is only necessary for programs that use this library (such as jed and slrn). If you plan on doing development with S-Lang, you will need the companion -dev package as well. Built-Using: unicode-data (= 11.0.0-1) Homepage: http://www.jedsoft.org/slang/ Package: libsm6 Status: install ok installed Priority: optional Section: libs Installed-Size: 65 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libsm Version: 2:1.2.3-1 Depends: libc6 (>= 2.17), libice6 (>= 1:1.0.0), libuuid1 (>= 2.16) Description: X11 Session Management library This package provides the main interface to the X11 Session Management library, which allows for applications to both manage sessions, and make use of session managers to save and restore their state for later use. . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libSM Homepage: https://www.x.org Package: libsmartcols1 Status: install ok installed Priority: optional Section: libs Installed-Size: 318 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: same Source: util-linux Version: 2.33.1-0.1+deb10u1 Depends: libc6 (>= 2.25) Description: smart column output alignment library This smart column output alignment library is used by fdisk utilities. Package: libsnappy1v5 Status: install ok installed Priority: extra Section: libs Installed-Size: 51 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Multi-Arch: same Source: snappy Version: 1.1.7-1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Conflicts: libsnappy1 Description: fast compression/decompression library Snappy is a compression/decompression library. It does not aim for maximum compression, or compatibility with any other compression library; instead, it aims for very high speeds and reasonable compression. . For instance, compared to the fastest mode of zlib, Snappy is an order of magnitude faster for most inputs, but the resulting compressed files are anywhere from 20% to 100% bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy compresses at about 250 MB/sec or more and decompresses at about 500 MB/sec or more. Homepage: https://github.com/google/snappy/ Package: libsndfile1 Status: install ok installed Priority: optional Section: libs Installed-Size: 575 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libsndfile Version: 1.0.28-6+deb10u2 Depends: libc6 (>= 2.17), libflac8 (>= 1.3.0), libogg0 (>= 1.0rc3), libvorbis0a (>= 1.2.3), libvorbisenc2 (>= 1.2.3) Description: Library for reading/writing audio files libsndfile is a library of C routines for reading and writing files containing sampled audio data. . Various versions of WAV (integer, floating point, GSM, and compressed formats); Microsoft PCM, A-law and u-law formats; AIFF, AIFC and RIFX; various AU/SND formats (Sun/NeXT, Dec AU, G721 and G723 ADPCM); RAW header-less PCM files; Amiga IFF/8SVX/16SV PCM files; Ensoniq PARIS (.PAF); Apple's Core Audio Format (CAF) and others. Homepage: http://www.mega-nerd.com/libsndfile/ Package: libsndio7.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 78 Maintainer: Peter Piwowarski Architecture: arm64 Multi-Arch: same Source: sndio Version: 1.5.0-3 Depends: libasound2 (>= 1.0.17), libbsd0 (>= 0.0), libc6 (>= 2.17) Suggests: sndiod Description: Small audio and MIDI framework from OpenBSD, runtime libraries Sndio is a small, simple audio and MIDI framework, developed by the OpenBSD project. It provides a lightweight audio and MIDI server and a well-documented userspace API to access the server or audio hardware in a uniform way. Sndio is designed to work well for both desktop and professional music applications, and supports features found in more complex sound systems such as per-application volume control, software mixing, and network transparency. . This package contains the sndio userspace libraries. Homepage: http://www.sndio.org/ Package: libsord-0-0 Status: install ok installed Priority: optional Section: utils Installed-Size: 61 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sord (0.16.0~dfsg0-1) Version: 0.16.0~dfsg0-1+b1 Depends: libc6 (>= 2.17), libserd-0-0 (>= 0.14.0~dfsg0) Suggests: sordi Description: library for storing RDF data in memory Sord is a lightweight C library for storing Resource Description Framework (RDF) data in memory. . Sord includes man pages for the library (man sord) and a simple command line utility (man sordi). Homepage: http://drobilla.net/software/sord/ Package: libsoundtouch1 Status: install ok installed Priority: optional Section: libs Installed-Size: 90 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: soundtouch Version: 2.1.2+ds1-1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5) Description: Sound stretching library SoundTouch is a library that can be used to change pitch and time of soundfiles independently. . This package contains the SoundTouch shared library. Homepage: https://www.surina.net/soundtouch/ Package: libsoup-gnome2.4-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 36 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libsoup2.4 Version: 2.64.2-2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.39.90), libsoup2.4-1 (>= 2.41.90) Description: HTTP library implementation in C -- GNOME support library It was originally part of a SOAP (Simple Object Access Protocol) implementation called Soup, but the SOAP and non-SOAP parts have now been split into separate packages. . libsoup uses the Glib main loop and is designed to work well with GTK+ applications. This enables GNOME applications to access HTTP servers on the network in a completely asynchronous fashion, very similar to the GTK+ programming model (a synchronous operation mode is also supported for those who want it). . The GNOME support library is used for features which are important to GNOME apps, but which require GNOME-specific libraries that non-GNOME apps may not want to add dependencies on. . Features: * Both asynchronous (GMainLoop and callback-based) and synchronous APIs * Automatically caches connections * SSL Support using GnuTLS * Proxy support, including authentication and SSL tunneling * Client support for Digest, NTLM, and Basic authentication * Server support for Digest and Basic authentication * Basic client-side SOAP and XML-RPC support . This package contains the GNOME support shared library. Homepage: https://wiki.gnome.org/Projects/libsoup Package: libsoup2.4-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 680 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libsoup2.4 Version: 2.64.2-2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.39.90), libgssapi-krb5-2 (>= 1.14+dfsg), libpsl5 (>= 0.16.0), libsqlite3-0 (>= 3.5.9), libxml2 (>= 2.7.4), glib-networking (>= 2.32.0) Description: HTTP library implementation in C -- Shared library It was originally part of a SOAP (Simple Object Access Protocol) implementation called Soup, but the SOAP and non-SOAP parts have now been split into separate packages. . libsoup uses the Glib main loop and is designed to work well with GTK+ applications. This enables GNOME applications to access HTTP servers on the network in a completely asynchronous fashion, very similar to the GTK+ programming model (a synchronous operation mode is also supported for those who want it). . Features: * Both asynchronous (GMainLoop and callback-based) and synchronous APIs * Automatically caches connections * SSL Support using GnuTLS * Proxy support, including authentication and SSL tunneling * Client support for Digest, NTLM, and Basic authentication * Server support for Digest and Basic authentication * Basic client-side SOAP and XML-RPC support . This package contains the shared library. Homepage: https://wiki.gnome.org/Projects/libsoup Package: libsox-fmt-all Status: install ok installed Priority: optional Section: libs Installed-Size: 65 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sox Version: 14.4.2+git20190427-1+deb10u3 Depends: libsox-fmt-alsa (= 14.4.2+git20190427-1+deb10u3), libsox-fmt-ao (= 14.4.2+git20190427-1+deb10u3), libsox-fmt-base (= 14.4.2+git20190427-1+deb10u3), libsox-fmt-mp3 (= 14.4.2+git20190427-1+deb10u3), libsox-fmt-oss (= 14.4.2+git20190427-1+deb10u3), libsox-fmt-pulse (= 14.4.2+git20190427-1+deb10u3) Description: All SoX format libraries SoX is the swiss army knife of sound processing. . This is a metapackage depending on all free SoX format libraries. Homepage: https://sox.sourceforge.io/ Package: libsox-fmt-alsa Status: install ok installed Priority: optional Section: libs Installed-Size: 86 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sox Version: 14.4.2+git20190427-1+deb10u3 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.17), libsox3 (>= 14.4.2~) Description: SoX alsa format I/O library SoX is the swiss army knife of sound processing. . This package contains the SoX alsa format I/O library. . alsa: https://www.alsa-project.org/main/index.php/Main_Page Homepage: https://sox.sourceforge.io/ Package: libsox-fmt-ao Status: install ok installed Priority: optional Section: libs Installed-Size: 78 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sox Version: 14.4.2+git20190427-1+deb10u3 Depends: libao4 (>= 1.1.0), libc6 (>= 2.17), libsox3 (>= 14.4.2~) Description: SoX Libao format I/O library SoX is the swiss army knife of sound processing. . This package contains the SoX Libao format I/O library. . libao: https://xiph.org/ao Homepage: https://sox.sourceforge.io/ Package: libsox-fmt-base Status: install ok installed Priority: optional Section: libs Installed-Size: 347 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sox Version: 14.4.2+git20190427-1+deb10u3 Replaces: libsox-fmt-flac, libsox-fmt-gsm, libsox-fmt-libsndfile, libsox-fmt-ogg, libsox-fmt-sndfile Depends: libc6 (>= 2.17), libflac8 (>= 1.3.0), libgsm1 (>= 1.0.18), libogg0 (>= 1.0rc3), libopencore-amrnb0, libopencore-amrwb0, libsndfile1 (>= 1.0.20), libsox3 (>= 14.4.2~), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvorbisfile3 (>= 1.1.2), libwavpack1 (>= 4.40.0) Description: Minimal set of SoX format libraries SoX is the swiss army knife of sound processing. . This package contains most audio formats libraries supported by SoX. Among them: Ogg Vorbis, WAV, AIFF, VOC, SND, AU, GSM, WavPack, LPC10, FLAC, MATLAB/GNU Octave, Portable Voice Format, AMR and Sound Forge Audio Format. Homepage: https://sox.sourceforge.io/ Package: libsox-fmt-mp3 Status: install ok installed Priority: optional Section: libs Installed-Size: 104 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sox Version: 14.4.2+git20190427-1+deb10u3 Depends: libc6 (>= 2.17), libid3tag0 (>= 0.15.1b), libmad0 (>= 0.15.1b-3), libmp3lame0 (>= 3.100), libsox3 (>= 14.4.2~), libtwolame0 (>= 0.3.10), zlib1g (>= 1:1.1.4) Description: SoX MP2 and MP3 format library SoX is the swiss army knife of sound processing. . This package contains the SoX MP2 and MP3 format library. Read support by libmad. MP2 and MP3 write support by libtwolame and libmp3lame respectively. . libmad: https://www.underbit.com/products/mad/ lame: https://lame.sourceforge.io Homepage: https://sox.sourceforge.io/ Package: libsox-fmt-oss Status: install ok installed Priority: optional Section: libs Installed-Size: 78 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sox Version: 14.4.2+git20190427-1+deb10u3 Depends: libc6 (>= 2.17), libsox3 (>= 14.4.2~) Description: SoX OSS format I/O library SoX is the swiss army knife of sound processing. . This package contains the SoX Open Sound System (OSS) format I/O library. . Open Sound System: http://www.opensound.com/oss.html Homepage: https://sox.sourceforge.io/ Package: libsox-fmt-pulse Status: install ok installed Priority: optional Section: libs Installed-Size: 78 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sox Version: 14.4.2+git20190427-1+deb10u3 Depends: libc6 (>= 2.17), libpulse0 (>= 0.99.1), libsox3 (>= 14.4.2~) Description: SoX PulseAudio format I/O library SoX is the swiss army knife of sound processing. . This package contains the SoX PulseAudio format I/O library. . PulseAudio: https://www.freedesktop.org/wiki/Software/PulseAudio/ Homepage: https://sox.sourceforge.io/ Package: libsox3 Status: install ok installed Priority: optional Section: libs Installed-Size: 590 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sox Version: 14.4.2+git20190427-1+deb10u3 Replaces: libsox1b Depends: libc6 (>= 2.22), libgomp1 (>= 4.9), libgsm1 (>= 1.0.18), libltdl7 (>= 2.4.6), libmagic1 (>= 5.12), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4) Recommends: libsox-fmt-alsa | libsox-fmt-ao | libsox-fmt-oss | libsox-fmt-pulse, libsox-fmt-base Suggests: libsox-fmt-all Conflicts: libsox0, libsox0a, libsox1, libsox1a Description: SoX library of audio effects and processing SoX is the swiss army knife of sound processing. . This package contains the SoX library which enables to convert various formats of computer audio files in to other formats. It also allows you to apply various effects to sound files. . Any format support requires at least libsox-fmt-base. Sound card I/O requires libsox-fmt-alsa, libsox-fmt-ao, libsox-fmt-oss or libsox-fmt-pulse. Homepage: https://sox.sourceforge.io/ Package: libsoxr0 Status: install ok installed Priority: optional Section: libs Installed-Size: 133 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libsoxr Version: 0.1.2-3 Depends: libc6 (>= 2.17), libgomp1 (>= 4.9) Description: High quality 1D sample-rate conversion library The SoX Resampler library `libsoxr' performs one-dimensional sample-rate conversion - it may be used, for example, to resample PCM-encoded audio. . It aims to give fast and high quality results for any constant (rational or irrational) resampling ratio. Phase-response, preserved bandwidth, aliasing, and rejection level parameters are all configurable; alternatively, simple `preset' configurations may be selected. . A simple API is provided that allows interfacing using commonly-used sample formats and buffering schemes. Homepage: http://sourceforge.net/projects/soxr/ Package: libspandsp2 Status: install ok installed Priority: optional Section: libs Installed-Size: 831 Maintainer: Debian VoIP Team Architecture: arm64 Multi-Arch: same Source: spandsp Version: 0.0.6+dfsg-2 Depends: libc6 (>= 2.17), libjpeg62-turbo (>= 1.3.1), libtiff5 (>= 4.0.3) Description: Telephony signal processing library spandsp is a low-level signal processing library that modulate and demodulate signals commonly used in telephony, such as the "noise" generated by a fax modem or DTMF touchpad. . This package contains the shared library. Homepage: https://www.soft-switch.org/installing-spandsp.html Package: libspeex1 Status: install ok installed Priority: optional Section: libs Installed-Size: 101 Maintainer: Ron Lee Architecture: arm64 Multi-Arch: same Source: speex (1.2~rc1.2-1) Version: 1.2~rc1.2-1+b2 Depends: libc6 (>= 2.17) Suggests: speex Conflicts: asterisk (<= 1:1.4.18.1~dfsg-1), libiaxclient1 (<= 2.0.2-1), libmediastreamer0 (<= 2.1.0-1), libopal-2.2 (<= 2.2.11~dfsg1-3), libopal-2.2-develop (<= 2.2.11~dfsg1-3), libopal-2.2-ptrace (<= 2.2.11~dfsg1-3), libopal-2.2.0 Description: The Speex codec runtime library Speex is an audio codec especially designed for compressing voice at low bit-rates for applications such as voice over IP (VoIP). In some senses, it is meant to be complementary to the Vorbis codec which places a greater emphasis on high-quality music reproduction. . This package provides the speex runtime library. Homepage: http://www.speex.org/ Package: libspeexdsp1 Status: install ok installed Priority: optional Section: libs Installed-Size: 79 Maintainer: Ron Lee Architecture: arm64 Multi-Arch: same Source: speex (1.2~rc1.2-1) Version: 1.2~rc1.2-1+b2 Depends: libc6 (>= 2.17) Description: The Speex extended runtime library Speex is an audio codec especially designed for compressing voice at low bit-rates for applications such as voice over IP (VoIP). In some senses, it is meant to be complementary to the Vorbis codec which places a greater emphasis on high-quality music reproduction. . This package provides the runtime library of additional functions that are part of the Speex distribution. Homepage: http://www.speex.org/ Package: libsqlite3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1272 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Multi-Arch: same Source: sqlite3 Version: 3.27.2-3+deb10u2 Depends: libc6 (>= 2.28) Breaks: python-migrate (<< 0.11.0-4~), python3-migrate (<< 0.11.0-4~) Description: SQLite 3 shared library SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Homepage: https://www.sqlite.org/ Package: libsratom-0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 51 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: sratom Version: 0.6.0~dfsg0-1 Depends: libc6 (>= 2.17), libserd-0-0 (>= 0.24.0~dfsg0), libsord-0-0 (>= 0.12.0~dfsg0) Description: library for serialising LV2 atoms to/from Turtle Sratom is a new C library for serialising LV2 atoms to/from Turtle. It is intended to be a full serialisation solution for LV2 atoms, allowing implementations to serialise binary atoms to strings and read them back again. This is particularly useful for saving plugin state, or implementing plugin control with network transparency. Sratom uses Serd and Sord to do the work, it is a small library implemented in a single source file, suitable for direct inclusion in projects if avoiding a dependency is desired. Homepage: http://drobilla.net/software/sratom/ Package: libsrtp2-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 153 Maintainer: Debian VoIP Team Architecture: arm64 Multi-Arch: same Source: libsrtp2 Version: 2.2.0-1 Depends: libc6 (>= 2.17) Description: Secure RTP (SRTP) and UST Reference Implementations - shared library SRTP is a security profile for RTP that adds confidentiality, message authentication, and replay protection to that protocol. It is specified in RFC 3711. . LibSRTP provides an implementation of the Secure Real-time Transport Protocol (SRTP), the Universal Security Transform (UST), and a supporting cryptographic kernel. . This package contains the shared libraries. Homepage: https://github.com/cisco/libsrtp Package: libss2 Status: install ok installed Priority: optional Section: libs Installed-Size: 100 Maintainer: Theodore Y. Ts'o Architecture: arm64 Multi-Arch: same Source: e2fsprogs Version: 1.44.5-1+deb10u3 Replaces: e2fsprogs (<< 1.34-1) Depends: libcom-err2, libc6 (>= 2.17) Description: command-line interface parsing library libss provides a simple command-line interface parser which will accept input from the user, parse the command into an argv argument vector, and then dispatch it to a handler function. . It was originally inspired by the Multics SubSystem library. Homepage: http://e2fsprogs.sourceforge.net Package: libssh2-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 262 Maintainer: Mikhail Gusarov Architecture: arm64 Multi-Arch: same Source: libssh2 Version: 1.8.0-2.1+deb10u1 Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), zlib1g (>= 1:1.1.4) Description: SSH2 client-side library libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP (v1-v5) sessions; port forwarding, X11 forwarding; password, key-based and keyboard-interactive authentication. . This package contains the runtime library. Homepage: https://libssh2.org/ Package: libssl1.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 3712 Maintainer: Debian OpenSSL Team Architecture: arm64 Multi-Arch: same Source: openssl Version: 1.1.1n-0+deb10u6 Depends: libc6 (>= 2.25), debconf (>= 0.5) | debconf-2.0 Breaks: isync (<< 1.3.0-2), lighttpd (<< 1.4.49-2), python-boto (<< 2.44.0-1.1), python-httplib2 (<< 0.11.3-1), python-imaplib2 (<< 2.57-5), python3-boto (<< 2.44.0-1.1), python3-imaplib2 (<< 2.57-5) Description: Secure Sockets Layer toolkit - shared libraries This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It provides the libssl and libcrypto shared libraries. Homepage: https://www.openssl.org/ Package: libstartup-notification0 Status: install ok installed Priority: optional Section: libs Installed-Size: 66 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: startup-notification Version: 0.12-6 Depends: libc6 (>= 2.17), libx11-xcb1, libxcb-util0 (>= 0.3.8), libxcb1 Description: library for program launch feedback (shared library) startup-notification is a library which allows programs to give the user visual feedback that they are being launched; this is typically implemented using a busy cursor. This library is currently used by GNOME programs, but is part of the freedesktop.org suite of cross-desktop libraries. . This package contains the shared library. Homepage: https://www.freedesktop.org/wiki/Software/startup-notification/ Package: libstdc++6 Status: install ok installed Priority: optional Section: libs Installed-Size: 1989 Maintainer: Debian GCC Maintainers Architecture: arm64 Multi-Arch: same Source: gcc-8 Version: 8.3.0-6 Replaces: libstdc++6-8-dbg (<< 4.9.0-3) Depends: gcc-8-base (= 8.3.0-6), libc6 (>= 2.18), libgcc1 (>= 1:4.2) Breaks: blockattack (<= 1.4.1+ds1-2.1+b2), boo (<= 0.9.5~git20110729.r1.202a430-2), c++-annotations (<= 10.2.0-1), clustalx (<= 2.1+lgpl-3), dff (<= 1.3.0+dfsg.1-4.1+b3), digikam-private-libs (<= 4:4.4.0-1.1+b2), dnsdist (<< 1.3.3-3), emscripten (<= 1.22.1-1), ergo (<= 3.4.0-1), fceux (<= 2.2.2+dfsg0-1), fiona (<= 1.5.1-2), flush (<= 0.9.12-3.1), freeorion (<= 0.4.4+git20150327-2), fslview (<= 4.0.1-4), fwbuilder (<= 5.1.0-4), gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gnote (<= 3.16.2-1), gnudatalanguage (<= 0.9.5-2+b2), innoextract (<= 1.4-1+b1), lambda-align (<< 1.0.3-5), libantlr-dev (<= 2.7.7+dfsg-6), libapache2-mod-passenger (<= 5.0.7-1), libaqbanking34-plugins, libaqsis1 (<= 1.8.2-1), libassimp3 (<= 3.0~dfsg-4), libboost-date-time1.54.0, libboost-date-time1.55.0, libchemps2-1 (<= 1.5-1), libcpprest2.4 (<= 2.4.0-2), libdap17 (<= 3.14.0-2), libdapclient6 (<= 3.14.0-2), libdapserver7 (<= 3.14.0-2), libdavix0 (<= 0.4.0-1+b1), libdballe6 (<= 6.8-1), libdiet-admin2.8 (<= 2.8.0-1+b3), libdiet-client2.8 (<= 2.8.0-1+b3), libdiet-sed2.8 (<= 2.8.0-1+b3), libfreefem++ (<= 3.37.1-1), libgazebo5 (<= 5.0.1+dfsg-2.1), libgetfem4++ (<= 4.2.1~beta1~svn4635~dfsg-3+b1), libgmsh2 (<= 2.9.3+dfsg1-1), libinsighttoolkit4.7 (<= 4.7.2-2), libkolabxml1 (<= 1.1.0-3), libktoblzcheck1c2a, liblhapdf0, libllvm3.8, libllvm3.9, libllvm4.0, libmarisa0 (<= 0.2.4-8), libogre-1.8.0 (<= 1.8.0+dfsg1-7+b1), libogre-1.9.0 (<= 1.9.0+dfsg1-4), libopenwalnut1 (<= 1.4.0~rc1+hg3a3147463ee2-1+b1), libpqxx-4.0 (<= 4.0.1+dfsg-3), libpythia8, libreoffice-core (<= 1:4.4.5-2), librime1 (<= 1.2+dfsg-2), libsimgrid3.14, libusbguard0 (<< 0.7.4+ds-1), libwibble-dev (<= 1.1-1), libwreport2 (<= 2.14-1), libxapian30 (<= 1.4.1-1~bpo8+1), libxmltooling6 (<= 1.5.3-2.1), lightspark (<= 0.7.2+git20150512-2+b1), mednafen (<< 1.22.1+dfsg-1), mira-assembler (<= 4.9.5-1), mongodb (<= 1:2.4.14-2), mongodb-server (<= 1:2.4.14-2), ncbi-blast+ (<= 2.2.30-4), nghttp2-proxy (<< 1.36.0-2), openscad (<= 2014.03+dfsg-1+b1), osm2pgsql (<< 0.96.0+ds-2), osmcoastline (<< 2.2.4-1), osmium-tool (<< 1.10.0-1), passepartout (<= 0.7.1-1.1), pdf2djvu (<= 0.7.21-2), pdns-recursor (<< 4.1.11-1), photoprint (<= 0.4.2~pre2-2.3+b2), plastimatch (<= 1.6.2+dfsg-1), plee-the-bear (<= 0.6.0-3.1), poedit (<< 2.2.1-2), povray (<= 1:3.7.0.0-8), powertop (<= 2.6.1-1), printer-driver-brlaser (<= 3-3), psi4 (<= 4.0~beta5+dfsg-2+b1), python-fiona (<= 1.5.1-2), python-guiqwt (<= 2.3.1-1), python-healpy (<= 1.8.1-1+b1), python-htseq (<= 0.5.4p3-2), python-imposm (<= 2.5.0-3+b2), python-pyosmium (<< 2.15.1-1), python-pysph (<= 0~20150606.gitfa26de9-5), python-rasterio (<= 0.24.0-1), python-scipy (<= 0.14.1-1), python-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-fiona (<= 1.5.1-2), python3-pyosmium (<< 2.15.1-1), python3-scipy (<= 0.14.1-1), python3-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-taglib (<= 0.3.6+dfsg-2+b2), realtimebattle (<= 1.0.8-14), ruby-passenger (<= 5.0.7-1), schroot (<= 1.6.10-1+b1), seer (<< 1.1.4-2), sqlitebrowser (<= 3.5.1-3), tecnoballz (<= 0.93.1-6), undertaker (<< 1.6.1-4.2), wesnoth-1.12-core (<= 1:1.12.4-1), widelands (<= 1:18-3+b1), xflr5 (<= 6.09.06-2) Conflicts: scim (<< 1.4.2-1) Description: GNU Standard C++ Library v3 This package contains an additional runtime library for C++ programs built with the GNU compiler. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Homepage: http://gcc.gnu.org/ Package: libstrongswan Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 1303 Maintainer: strongSwan Maintainers Architecture: arm64 Source: strongswan Version: 5.7.2-1+deb10u2 Config-Version: 5.7.2-1+deb10u2 Replaces: strongswan-starter (<< 5.3.5-2) Depends: libc6 (>= 2.27), libcap2 (>= 1:2.10), libgmp10, libsystemd0 (>= 227) Recommends: libstrongswan-standard-plugins Suggests: libstrongswan-extra-plugins Breaks: strongswan-starter (<< 5.3.5-2) Conffiles: /etc/strongswan.conf cf3d1b642d68b1af384aa0d8adf31deb /etc/strongswan.d/charon/aes.conf f7653385de28b293e155c7257d976162 /etc/strongswan.d/charon/attr.conf 21648bde93f9784652cdbbb306cfd88e /etc/strongswan.d/charon/constraints.conf e99f94125d99e9b0860af190b539af51 /etc/strongswan.d/charon/dnskey.conf 2eca11a1873d4e5bdf2e9ce9b31c8388 /etc/strongswan.d/charon/fips-prf.conf 0e040afc20ca84907ab0b429e09741b6 /etc/strongswan.d/charon/gmp.conf 697cf867d66f97ac4b0fdc9b5642b214 /etc/strongswan.d/charon/hmac.conf 96276990445951092f232d92696562bb /etc/strongswan.d/charon/kernel-netlink.conf 8fe218d5f061bf62cdb80162b6141dbb /etc/strongswan.d/charon/md5.conf 51840e725e3fa3aef815767b7219cd9c /etc/strongswan.d/charon/mgf1.conf c50e7975b4c9c6eb19acb217a6887196 /etc/strongswan.d/charon/nonce.conf 81985735b2aa564a34d9537dfec47aa1 /etc/strongswan.d/charon/pem.conf 9c2afa980f36e76a5f11401187789364 /etc/strongswan.d/charon/pgp.conf 651a092d54d65f0b16ac6a3566fdbde4 /etc/strongswan.d/charon/pkcs1.conf 9d2fd3f462e24ccd84db7581a6e8a79a /etc/strongswan.d/charon/pkcs12.conf 99155df25407780627c03317bb86d4bd /etc/strongswan.d/charon/pkcs7.conf 11efe7f05fb024f7bf0ae0e82c03032c /etc/strongswan.d/charon/pkcs8.conf ff23bb9a129a830ff124556cedc100fc /etc/strongswan.d/charon/pubkey.conf 61d9bf247a544d18deca9a2495f8a9bf /etc/strongswan.d/charon/random.conf 8fc0148bfb6efe8033c7cacebe5da452 /etc/strongswan.d/charon/rc2.conf b40a14dfd4b1752674d7d94f68380c16 /etc/strongswan.d/charon/resolve.conf b66dc6537ea8e97b4fb294549ae36fff /etc/strongswan.d/charon/revocation.conf 6e92a2290c40898265a3a47c5a16e1a9 /etc/strongswan.d/charon/sha1.conf a233d1540ec2cabf0ff1e53113f3a2fd /etc/strongswan.d/charon/sha2.conf 48b9881b58c374092e72668e8ff89f29 /etc/strongswan.d/charon/sshkey.conf 2a454f37202953d289f193ae5e002c10 /etc/strongswan.d/charon/x509.conf d005d70bf8f9a027d4f63b4022310f89 /etc/strongswan.d/charon/xcbc.conf 15b9fc5696459acf30ee5702727678b6 Description: strongSwan utility and crypto library The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides the underlying libraries of charon and other strongSwan components. It is built in a modular way and is extendable through various plugins. . Some default (as specified by the strongSwan projet) plugins are included. For libstrongswan (cryptographic backends, URI fetchers and database layers): - aes (AES-128/192/256 cipher software implementation) - constraints (X.509 certificate advanced constraint checking) - dnskey (Parse RFC 4034 public keys) - fips-prf (PRF specified by FIPS, used by EAP-SIM/AKA algorithms) - gmp (RSA/DH crypto backend based on libgmp) - hmac (HMAC wrapper using various hashers) - md5 (MD5 hasher software implementation) - nonce (Default nonce generation plugin) - pem (PEM encoding/decoding routines) - pgp (PGP encoding/decoding routines) - pkcs1 (PKCS#1 encoding/decoding routines) - pkcs8 (PKCS#8 decoding routines) - pkcs12 (PKCS#12 decoding routines) - pubkey (Wrapper to handle raw public keys as trusted certificates) - random (RNG reading from /dev/[u]random) - rc2 (RC2 cipher software implementation) - revocation (X.509 CRL/OCSP revocation checking) - sha1 (SHA1 hasher software implementation) - sha2 (SHA256/SHA384/SHA512 hasher software implementation) - sshkey (SSH key decoding routines) - x509 (Advanced X.509 plugin for parsing/generating X.509 certificates/CRLs and OCSP messages) - xcbc (XCBC wrapper using various ciphers) - attr (Provides IKE attributes configured in strongswan.conf) - kernel-netlink [linux] (IPsec/Networking kernel interface using Linux Netlink) - kernel-pfkey [kfreebsd] (IPsec kernel interface using PF_KEY) - kernel-pfroute [kfreebsd] (Networking kernel interface using PF_ROUTE) - resolve (Writes name servers received via IKE to a resolv.conf file or installs them via resolvconf(8)) . Also included is the libtpmtss library adding support for TPM plugin (https://wiki.strongswan.org/projects/strongswan/wiki/TpmPlugin) Homepage: http://www.strongswan.org Package: libswresample3 Status: install ok installed Priority: optional Section: libs Installed-Size: 208 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: ffmpeg Version: 7:4.1.11-0+deb10u1 Depends: libavutil56 (= 7:4.1.11-0+deb10u1), libc6 (>= 2.17), libsoxr0 (>= 0.1.0) Description: FFmpeg library for audio resampling, rematrixing etc. - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library provides performs highly optimized audio resampling, rematrixing and sample format conversion operations. Specifically, this library performs the following conversions: * Resampling is the process of changing the audio rate, for example from a high sample rate of 44100Hz to 8000Hz. Audio conversion from high to low sample rate is a lossy process. Several resampling options and algorithms are available. * Rematrixing is the process of changing the channel layout, for example from stereo to mono. When the input channels cannot be mapped to the output streams, the process is lossy, since it involves different gain factors and mixing. Various other audio conversions (e.g. stretching and padding) are enabled through dedicated options. * Format conversion is the process of converting the type of samples, for example from 16-bit signed samples to unsigned 8-bit or float samples. It also handles packing conversion, when passing from packed layout (all samples belonging to distinct channels interleaved in the same buffer), to planar layout (all samples belonging to the same channel stored in a dedicated buffer or "plane"). . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libsystemd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 756 Maintainer: Debian systemd Maintainers Architecture: arm64 Multi-Arch: same Source: systemd Version: 241-7~deb10u10 Pre-Depends: libc6 (>= 2.28), libgcrypt20 (>= 1.8.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614) Description: systemd utility library The libsystemd0 library provides interfaces to various systemd components. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: libtag1v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 50 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: taglib Version: 1.11.1+dfsg.1-0.3+deb10u1 Replaces: libtag1c2a Depends: libtag1v5-vanilla (= 1.11.1+dfsg.1-0.3+deb10u1) Conflicts: libtag-extras0, libtag1c2a Description: audio meta-data library TagLib is a library for reading and editing audio meta data, commonly know as tags. . - A clean, high level, C++ API to handling audio meta data. - Format specific APIs for advanced API users. - ID3v1, ID3v2, APE, FLAC, Xiph, iTunes-style MP4 and WMA tag formats. - MP3, MPC, FLAC, MP4, ASF, AIFF, WAV, TrueAudio, WavPack, Ogg FLAC, Ogg Vorbis, Speex and Opus file formats. - Basic audio file properties such as length, sample rate, etc. - Long term binary and source compatibility. - Extensible design, notably the ability to add other formats or extend - current formats as a library user. - Full support for unicode and internationalized tags. - Dual MPL and LGPL licenses. - No external toolkit dependencies. . This package is the main metapackage for the TagLib Audio Meta-Data Library. Historically packages using TagLib should depend on this package rather than specific TagLib flavour even if the only vanilla (original) flavour is available at the moment. Homepage: http://taglib.github.io/ Package: libtag1v5-vanilla Status: install ok installed Priority: optional Section: libs Installed-Size: 1153 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: taglib Version: 1.11.1+dfsg.1-0.3+deb10u1 Replaces: libtag1-vanilla, libtag1c2a (<< 1.5-5) Depends: libc6 (>= 2.17), libgcc1 (>= 1:4.2), libicu63 (>= 63.1-1~), libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4) Breaks: libtag1-vanilla, libtag1c2a (<< 1.5-5) Conflicts: libtag-extras0, libtag1-rusxmms Description: audio meta-data library - vanilla flavour TagLib is a library for reading and editing audio meta data, commonly know as tags. . - A clean, high level, C++ API to handling audio meta data. - Format specific APIs for advanced API users. - ID3v1, ID3v2, APE, FLAC, Xiph, iTunes-style MP4 and WMA tag formats. - MP3, MPC, FLAC, MP4, ASF, AIFF, WAV, TrueAudio, WavPack, Ogg FLAC, Ogg Vorbis, Speex and Opus file formats. - Basic audio file properties such as length, sample rate, etc. - Long term binary and source compatibility. - Extensible design, notably the ability to add other formats or extend - current formats as a library user. - Full support for unicode and internationalized tags. - Dual MPL and LGPL licenses. - No external toolkit dependencies. . This is the runtime package for programs that use the TagLib Audio Meta-Data Library. This package contains original and unpatched flavour of the library. Homepage: http://taglib.github.io/ Package: libtasn1-6 Status: install ok installed Priority: standard Section: libs Installed-Size: 112 Maintainer: Debian GnuTLS Maintainers Architecture: arm64 Multi-Arch: same Version: 4.13-3+deb10u1 Depends: libc6 (>= 2.17) Description: Manage ASN.1 structures (runtime) Manage ASN1 (Abstract Syntax Notation One) structures. The main features of this library are: * on-line ASN1 structure management that doesn't require any C code file generation. * off-line ASN1 structure management with C code file generation containing an array. * DER (Distinguish Encoding Rules) encoding * no limits for INTEGER and ENUMERATED values . This package contains runtime libraries. Homepage: http://www.gnu.org/software/libtasn1/ Package: libtbb2 Status: install ok installed Priority: optional Section: libs Installed-Size: 307 Maintainer: Debian Science Maintainers Architecture: arm64 Multi-Arch: same Source: tbb Version: 2018~U6-4 Depends: libatomic1 (>= 4.8), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 7) Description: parallelism library for C++ - runtime files TBB is a library that helps you leverage multi-core processor performance without having to be a threading expert. It represents a higher-level, task-based parallelism that abstracts platform details and threading mechanism for performance and scalability. . (Note: if you are a user of the i386 architecture, i.e., 32-bit Intel or compatible hardware, this package only supports Pentium4-compatible and higher processors.) . This package includes the TBB runtime files. Homepage: https://www.threadingbuildingblocks.org/ Package: libtdb1 Status: install ok installed Priority: optional Section: libs Installed-Size: 119 Maintainer: Debian Samba Maintainers Architecture: arm64 Multi-Arch: same Source: tdb (1.3.16-2) Version: 1.3.16-2+b1 Depends: libc6 (>= 2.17) Description: Trivial Database - shared library This is a simple database API. It is modelled after the structure of GDBM. TDB features, unlike GDBM, multiple writers support with appropriate locking and transactions. . This package contains the shared library file. Homepage: http://tdb.samba.org/ Package: libteamdctl0 Status: install ok installed Priority: optional Section: net Installed-Size: 41 Maintainer: Dmitry Smirnov Architecture: arm64 Multi-Arch: same Source: libteam Version: 1.28-1 Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14) Description: library for communication with `teamd` process libteamdctl is a library for communication with teamd process (via D-Bus, Unix socket or zeromq). It is used by the `teamdctl` utility. . Libteam provides a mechanism to team multiple NICs (ports) at OSI Layer 2 (Data link) into a single virtual NIC. The process is called "channel bonding", "Ethernet bonding", "channel teaming", "link aggregation", etc. This is already implemented in the Linux kernel by the bonding driver but unlike the bonding driver, libteam (user space) has the following additional features: * load-balancing for LACP support * NS/NA (IPV6) link monitoring * port priorities and stickiness ("primary" option enhancement) * separate per-port link monitoring setup . Libteam requires Linux kernel 3.3 or higher. Homepage: http://libteam.org Package: libtext-iconv-perl Status: install ok installed Priority: required Section: perl Installed-Size: 50 Maintainer: Anibal Monsalve Salazar Architecture: arm64 Source: libtext-iconv-perl (1.7-5) Version: 1.7-5+b6 Depends: libc6 (>= 2.17), perl-base (>= 5.28.0-3), perlapi-5.28.0 Description: converts between character sets in Perl The iconv() family of functions from XPG4 defines an API for converting between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They are provided by libc6. . This package allows access to them from Perl via the Text::Iconv package. Homepage: http://search.cpan.org/search?module=Text::Iconv Package: libthai-data Status: install ok installed Priority: optional Section: libs Installed-Size: 613 Maintainer: Theppitak Karoonboonyanan Architecture: all Multi-Arch: foreign Source: libthai Version: 0.1.28-2 Breaks: libthai0 (<< 0.1.10) Description: Data files for Thai language support library LibThai is a set of Thai language support routines aimed to ease developers' tasks to incorporate Thai language support in their applications. It includes important Thai-specific functions e.g. word breaking, input and output methods as well as basic character and string supports. . This package contains data files needed by the LibThai library. Homepage: https://linux.thai.net/projects/libthai Package: libthai0 Status: install ok installed Priority: optional Section: libs Installed-Size: 90 Maintainer: Theppitak Karoonboonyanan Architecture: arm64 Multi-Arch: same Source: libthai Version: 0.1.28-2 Depends: libthai-data (>= 0.1.10), libc6 (>= 2.17), libdatrie1 (>= 0.2.0) Enhances: libqtcore4, libqtgui4 Description: Thai language support library LibThai is a set of Thai language support routines aimed to ease developers' tasks to incorporate Thai language support in their applications. It includes important Thai-specific functions e.g. word breaking, input and output methods as well as basic character and string supports. . This package contains the shared libraries needed to run programs that use the LibThai library. Homepage: https://linux.thai.net/projects/libthai Package: libtheora0 Status: install ok installed Priority: optional Section: libs Installed-Size: 591 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libtheora Version: 1.1.1+dfsg.1-15 Depends: libc6 (>= 2.17), libcairo2 (>= 1.2.4), libogg0 (>= 1.1.0) Description: Theora Video Compression Codec Theora is an open video codec being developed by the Xiph.org Foundation as part of their Ogg project. Theora is originally derived from On2's VP3 codec, and has improved on it significantly with the merging of code from the Thusnelda branch. Homepage: https://www.theora.org/ Package: libtiff5 Status: install ok installed Priority: optional Section: libs Installed-Size: 626 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Multi-Arch: same Source: tiff Version: 4.1.0+git191117-2~deb10u9 Depends: libc6 (>= 2.17), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblzma5 (>= 5.1.1alpha+20120614), libwebp6 (>= 0.5.1), libzstd1 (>= 1.3.2), zlib1g (>= 1:1.1.4) Description: Tag Image File Format (TIFF) library libtiff is a library providing support for the Tag Image File Format (TIFF), a widely used format for storing image data. This package includes the shared library. Homepage: https://libtiff.gitlab.io/libtiff/ Package: libtimedate-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 124 Maintainer: Debian Perl Group Architecture: all Version: 2.3000-2+deb10u1 Replaces: timedate Provides: timedate Depends: perl Breaks: timedate Description: collection of modules to manipulate date/time information TimeDate is a collection of Perl modules useful for manipulating date and time information. Date::Parse can parse absolute date specifications in a wide variety of input formats and many languages (via Date::Language). . This package also includes Date::Format, which can format dates into strings, as well as Time::Zone, which contains miscellaneous time zone functions. Homepage: https://metacpan.org/release/TimeDate Package: libtinfo6 Status: install ok installed Priority: optional Section: libs Installed-Size: 526 Maintainer: Craig Small Architecture: arm64 Multi-Arch: same Source: ncurses Version: 6.1+20181013-2+deb10u5 Depends: libc6 (>= 2.17) Description: shared low-level terminfo library for terminal handling The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared low-level terminfo library. Homepage: https://invisible-island.net/ncurses/ Package: libtry-tiny-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 49 Maintainer: Debian Perl Group Architecture: all Version: 0.30-1 Depends: perl Suggests: perl (>= 5.21.4) | libsub-name-perl Description: module providing minimalistic try/catch Try::Tiny is a Perl module that provides bare bones try/catch statements. It is designed to eliminate common mistakes with eval blocks, and NOTHING else. . The main focus of this module is to provide simple and reliable error handling for those having a hard time installing TryCatch, but who still want to write correct eval blocks without 5 lines of boilerplate each time. Homepage: https://metacpan.org/release/Try-Tiny Package: libtwolame0 Status: install ok installed Priority: optional Section: libs Installed-Size: 131 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: twolame Version: 0.3.13-4 Depends: libc6 (>= 2.17) Description: MPEG Audio Layer 2 encoding library TwoLAME is an optimized MPEG Audio Layer 2 encoder. It is based on tooLAME by Mike Cheng, which in turn is based upon the ISO dist10 code and portions of LAME. . TwoLAME does NOT support MPEG Audio Layer 3 (MP3) encoding due to patent issues surrounding MP3. . However, as most MPEG Audio players are able to play layer 2 (MP2) files, TwoLAME makes a very good drop-in replacement for LAME and other layer 3 encoders. . This package contains the shared library. Homepage: http://www.twolame.org Package: libudev1 Status: install ok installed Priority: optional Section: libs Installed-Size: 255 Maintainer: Debian systemd Maintainers Architecture: arm64 Multi-Arch: same Source: systemd Version: 241-7~deb10u10 Depends: libc6 (>= 2.28) Description: libudev shared library This library provides access to udev device information. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: libunique-1.0-0 Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 93 Maintainer: Debian GNOME Maintainers Architecture: arm64 Source: libunique Version: 1.1.6-6 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.88), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk2.0-0 (>= 2.24.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libx11-6, default-dbus-session-bus | dbus-session-bus Description: Library for writing single instance applications - shared libraries Unique is a library for writing single instance application. If you launch a single instance application twice, the second instance will either just quit or will send a message to the running instance. . Unique makes it easy to write this kind of applications, by providing a base class, taking care of all the IPC machinery needed to send messages to a running instance, and also handling the startup notification side. . This package contains the shared libraries. Homepage: https://wiki.gnome.org/Attic/LibUnique Package: libunistring2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1547 Maintainer: Jörg Frings-Fürst Architecture: arm64 Multi-Arch: same Source: libunistring Version: 0.9.10-1 Depends: libc6 (>= 2.17) Description: Unicode string library for C The 'libunistring' library implements Unicode strings (in the UTF-8, UTF-16, and UTF-32 encodings), together with functions for Unicode characters (character names, classifications, properties) and functions for string processing (formatted output, width, word breaks, line breaks, normalization, case folding, regular expressions). . This package contains the shared library. Homepage: https://www.gnu.org/software/libunistring/ Package: libunwind8 Status: install ok installed Priority: optional Section: libs Installed-Size: 172 Maintainer: Adrian Bunk Architecture: arm64 Multi-Arch: same Source: libunwind Version: 1.2.1-10~deb10u1 Replaces: libgcc1 (<< 1:4.0.0-2) Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), liblzma5 (>= 5.1.1alpha+20110809) Conflicts: libunwind1-dev Description: library to determine the call-chain of a program - runtime The primary goal of this project is to define a portable and efficient C programming interface (API) to determine the call-chain of a program. The API additionally provides the means to manipulate the preserved (callee-saved) state of each call-frame and to resume execution at any point in the call-chain (non-local goto). The API supports both local (same-process) and remote (across-process) operation. As such, the API is useful in a number of applications. . This package includes the shared libraries Homepage: http://www.nongnu.org/libunwind Package: libupower-glib3 Status: install ok installed Priority: optional Section: libs Installed-Size: 195 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: same Source: upower Version: 0.99.10-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3) Recommends: upower (>> 0.99) Description: abstraction for power management - shared library upower provides an interface to enumerate power sources on the system and control system-wide power management. Any application can access the org.freedesktop.UPower service on the system message bus. Some operations (such as suspending the system) are restricted using PolicyKit. . This package contains the shared library to be used by applications. Homepage: https://upower.freedesktop.org/ Package: liburi-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 230 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 1.76-1 Depends: perl:any Suggests: libwww-perl Description: module to manipulate and access URI strings URI is a collection of Perl modules that represent and manipulate Uniform Resource Identifier (URI) references as specified in RFC 2396. . URI objects can be used to access and manipulate the various components that make up these strings. There are also methods to combine URIs in various ways. . The URI class replaces the URI::URL class that used to be distributed with libwww-perl. This package also includes an emulation of the old URI::URL interface, which implements both the old and the new interface. Homepage: https://metacpan.org/release/URI Package: libusb-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 125 Maintainer: Aurelien Jarno Architecture: arm64 Multi-Arch: same Source: libusb-1.0 Version: 2:1.0.22-2 Depends: libc6 (>= 2.17), libudev1 (>= 183) Description: userspace USB programming library Library for programming USB applications without the knowledge of Linux kernel internals. . This package contains what you need to run programs that use this library. Homepage: http://www.libusb.info Package: libusbmuxd4 Status: install ok installed Priority: optional Section: libs Installed-Size: 50 Maintainer: gtkpod Maintainers Architecture: arm64 Multi-Arch: same Source: libusbmuxd Version: 1.1.0~git20181007.07a493a-1 Depends: libc6 (>= 2.17), libplist3 (>= 1.11) Breaks: usbmuxd (<< 1.1.1~git20181007.f838cf6-1) Description: USB multiplexor daemon for iPhone and iPod Touch devices - library usbmuxd, the USB multiplexor daemon, is in charge of coordinating access to iPhone and iPod Touch services over USB. Synchronization and management applications for the iPhone and iPod Touch need this daemon to communicate with such devices concurrently. . This package contains the shared library. Homepage: https://libimobiledevice.org Package: libuuid1 Status: install ok installed Priority: optional Section: libs Installed-Size: 119 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: same Source: util-linux Version: 2.33.1-0.1+deb10u1 Replaces: e2fsprogs (<< 1.34-1) Depends: libc6 (>= 2.25) Recommends: uuid-runtime Description: Universally Unique ID library The libuuid library generates and parses 128-bit Universally Unique IDs (UUIDs). A UUID is an identifier that is unique within the space of all such identifiers across both space and time. It can be used for multiple purposes, from tagging objects with an extremely short lifetime to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. Package: libv4l-0 Status: hold ok installed Priority: optional Section: libs Installed-Size: 209 Maintainer: Gregor Jasny Architecture: arm64 Multi-Arch: same Source: v4l-utils Version: 1.16.3-3 Depends: libv4lconvert0 (= 1.16.3-3), libc6 (>= 2.27) Description: Collection of video4linux support libraries libv4l is a collection of libraries which adds a thin abstraction layer on top of video4linux2 devices. The purpose of this (thin) layer is to make it easy for application writers to support a wide variety of devices without having to write separate code for different devices in the same class. libv4l consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2. . libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent of the drivers for those devices supporting v4l1 compatibility (which many v4l2 drivers do not). . libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the application transparent libv4lconvert conversion where necessary. . This package contains the shared libraries. Homepage: https://linuxtv.org/downloads/v4l-utils/ Package: libv4l-rkmpp Status: hold ok installed Priority: optional Section: libs Installed-Size: 133 Maintainer: Jeffy Chen Architecture: arm64 Version: 1.3.2-1 Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.38), librga2, librockchip-mpp1 Description: A rockchip-mpp V4L2 wrapper plugin for chromium V4L2 VDA A V4L2 plugin that wraps rockchip-mpp for the chromium's V4L2 VDA. . The original idea comes from v4l-gst. Homepage: https://github.com/JeffyCN/libv4l-rkmpp Package: libv4l2rds0 Status: install ok installed Priority: optional Section: libs Installed-Size: 106 Maintainer: Gregor Jasny Architecture: arm64 Multi-Arch: same Source: v4l-utils Version: 1.16.3-3 Depends: libc6 (>= 2.17) Description: Video4Linux Radio Data System (RDS) decoding library This library decodes a RDS stream obtained from a Video4Linux (V4L) version 2 device. It supports both: the US based RBDS and European RDS protocol. . This package contains the shared library. Homepage: https://linuxtv.org/downloads/v4l-utils/ Package: libv4lconvert0 Status: install ok installed Priority: optional Section: libs Installed-Size: 268 Maintainer: Gregor Jasny Architecture: arm64 Multi-Arch: same Source: v4l-utils Version: 1.16.3-3 Replaces: libv4l-0 (<< 0.8.5-4) Depends: libc6 (>= 2.27), libjpeg62-turbo (>= 1.3.1) Breaks: libv4l-0 (<< 0.8.5-4) Description: Video4linux frame format conversion library libv4lconvert offers functions to convert from any (known) pixelformat to BGR24, RGB24, YUV420 and YVU420. . This package contains the shared library. Homepage: https://linuxtv.org/downloads/v4l-utils/ Package: libva-drm2 Status: install ok installed Priority: optional Section: libs Installed-Size: 39 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libva Version: 2.4.0-1 Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.16), libva2 (>= 2.4.0), libva2 (<< 2.4.0.1) Description: Video Acceleration (VA) API for Linux -- DRM runtime Video Acceleration API (VA API) is a library ("libVA") and API specification which enables and provides access to graphics hardware (GPU) acceleration for video processing on Linux and UNIX based operating systems. Accelerated processing includes video decoding, video encoding, subpicture blending and rendering. The specification was originally designed by Intel for its GMA (Graphics Media Accelerator) series of GPU hardware, the API is however not limited to GPUs or Intel specific hardware, as other hardware and manufacturers can also freely use this API for hardware accelerated video decoding. . This package provides the libva-drm library. Homepage: https://01.org/linuxmedia/vaapi Package: libva-x11-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 51 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libva Version: 2.4.0-1 Depends: libc6 (>= 2.17), libdrm2 (>= 2.3.1), libva2 (>= 2.4.0), libva2 (<< 2.4.0.1), libx11-6 (>= 2:1.4.99.1), libxext6, libxfixes3 Description: Video Acceleration (VA) API for Linux -- X11 runtime Video Acceleration API (VA API) is a library ("libVA") and API specification which enables and provides access to graphics hardware (GPU) acceleration for video processing on Linux and UNIX based operating systems. Accelerated processing includes video decoding, video encoding, subpicture blending and rendering. The specification was originally designed by Intel for its GMA (Graphics Media Accelerator) series of GPU hardware, the API is however not limited to GPUs or Intel specific hardware, as other hardware and manufacturers can also freely use this API for hardware accelerated video decoding. . This package provides the libva-x11 library. Homepage: https://01.org/linuxmedia/vaapi Package: libva2 Status: install ok installed Priority: optional Section: libs Installed-Size: 161 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libva Version: 2.4.0-1 Provides: libva-driver-abi-1.0, libva-driver-abi-1.1, libva-driver-abi-1.2, libva-driver-abi-1.3, libva-driver-abi-1.4 Depends: libc6 (>= 2.17) Recommends: va-driver-all | va-driver Description: Video Acceleration (VA) API for Linux -- runtime Video Acceleration API (VA API) is a library ("libVA") and API specification which enables and provides access to graphics hardware (GPU) acceleration for video processing on Linux and UNIX based operating systems. Accelerated processing includes video decoding, video encoding, subpicture blending and rendering. The specification was originally designed by Intel for its GMA (Graphics Media Accelerator) series of GPU hardware, the API is however not limited to GPUs or Intel specific hardware, as other hardware and manufacturers can also freely use this API for hardware accelerated video decoding. . This package provides the main libva library. Homepage: https://01.org/linuxmedia/vaapi Package: libvdpau1 Status: install ok installed Priority: optional Section: libs Installed-Size: 109 Maintainer: Debian NVIDIA Maintainers Architecture: arm64 Multi-Arch: same Source: libvdpau Version: 1.1.1-10 Replaces: lib32vdpau1 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.4.99.1), libxext6 Recommends: vdpau-driver-all | vdpau-driver Conflicts: lib32vdpau1 Conffiles: /etc/vdpau_wrapper.cfg bc89239208609c5d031b74c99a45747d Description: Video Decode and Presentation API for Unix (libraries) VDPAU (Video Decode and Presentation API for Unix) is an open source library (libvdpau) and API designed by NVIDIA originally for its GeForce 8 series and later GPU hardware, targeted at the X Window System on Unix operating-systems (including Linux, FreeBSD, and Solaris). This VDPAU API allows video programs to offload portions of the video decoding process and video post-processing to the GPU video-hardware. . This package contains the VDPAU wrapper and trace libraries. Homepage: https://cgit.freedesktop.org/~aplattner/libvdpau Package: libvisual-0.4-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 393 Maintainer: Joao Eriberto Mota Filho Architecture: arm64 Multi-Arch: same Source: libvisual Version: 0.4.0-15 Depends: libc6 (>= 2.17) Suggests: libvisual-0.4-plugins Breaks: libvisual-0.4-plugins (<< 0.4.0.dfsg.1-5) Description: audio visualization framework Libvisual is a generic visualization framework that allows applications to easily access and manage visualization plugins. . Audio visualization is the process of making pretty moving images that are correlated in some way to the audio currently being played by a media player. Most audio visualization is tied to a specific application or media player, making it difficult to share code. Libvisual allows applications to use existing visualization plugins written for the libvisual framework. . This package provides the runtime libraries for libvisual. Libvisual is not very useful without visualization plugins, so it is highly recommended to install the libvisual-0.4-plugins package. Homepage: http://libvisual.org Package: libvo-aacenc0 Status: install ok installed Priority: optional Section: libs Installed-Size: 118 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: vo-aacenc (0.1.3-1) Version: 0.1.3-1+b1 Depends: libc6 (>= 2.17) Description: VisualOn AAC encoder library This library contains an encoder implementation of the Advanced Audio Coding (AAC) audio codec. The library is based on a codec implementation by VisualOn, part of the Stagefright framework from the Google Android project. Homepage: http://opencore-amr.git.sourceforge.net/ Package: libvo-amrwbenc0 Status: install ok installed Priority: optional Section: libs Installed-Size: 109 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: vo-amrwbenc (0.1.3-1) Version: 0.1.3-1+b1 Depends: libc6 (>= 2.17) Description: VisualOn AMR-WB encoder library This library contains an encoder implementation of the Adaptive Multi Rate Wideband (AMR-WB) audio codec. The library is based on a codec implementation by VisualOn, part of the Stagefright framework from the Google Android project. . This package contains development files. Homepage: http://opencore-amr.git.sourceforge.net/ Package: libvorbis0a Status: install ok installed Priority: optional Section: libs Installed-Size: 193 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libvorbis Version: 1.3.6-2 Depends: libc6 (>= 2.17), libogg0 (>= 1.1.0) Description: decoder library for Vorbis General Audio Compression Codec Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates from 16 to 128 kbps/channel. . The Vorbis library is the primary Ogg Vorbis library. Homepage: https://www.xiph.org/vorbis/ Package: libvorbisenc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 663 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libvorbis Version: 1.3.6-2 Depends: libc6 (>= 2.17), libogg0 (>= 1.0rc3), libvorbis0a (= 1.3.6-2) Description: encoder library for Vorbis General Audio Compression Codec Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates from 16 to 128 kbps/channel. . The Vorbisenc library provides a convenient API for setting up an encoding environment using libvorbis. Homepage: https://www.xiph.org/vorbis/ Package: libvorbisfile3 Status: install ok installed Priority: optional Section: libs Installed-Size: 59 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libvorbis Version: 1.3.6-2 Depends: libc6 (>= 2.17), libogg0 (>= 1.1.0), libvorbis0a (= 1.3.6-2) Description: high-level API for Vorbis General Audio Compression Codec Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates from 16 to 128 kbps/channel. . The Vorbisfile library provides a convenient high-level API for decoding and basic manipulation of all Vorbis-I audio streams. Homepage: https://www.xiph.org/vorbis/ Package: libvpx5 Status: install ok installed Priority: optional Section: libs Installed-Size: 1651 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: libvpx Version: 1.7.0-3+deb10u3 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1) Description: VP8 and VP9 video codec (shared library) VP8 and VP9 are open video codecs, originally developed by On2 and released as open source by Google Inc. They are the successor of the VP3 codec, on which the Theora codec was based. . This package contains the shared libraries. Homepage: http://www.webmproject.org Package: libvte-2.91-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 950 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: vte2.91 Version: 0.54.2-2 Depends: libvte-2.91-common (>= 0.54.2-2), libatk1.0-0 (>= 1.12.4), libc6 (>= 2.25), libcairo2 (>= 1.10.0), libgcc1 (>= 1:4.2), libglib2.0-0 (>= 2.40.0), libgnutls30 (>= 3.6.5), libgtk-3-0 (>= 3.20), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.22.0), libpcre2-8-0 (>= 10.32), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.0) Description: Terminal emulator widget for GTK+ 3.0 - runtime files The VTE library provides a terminal emulator widget VteTerminal for applications using the GTK+ toolkit. It also provides the VtePTY object containing functions for starting a new process on a new pseudo-terminal and for manipulating pseudo-terminals. . This package contains the runtime library, needed by programs using the VTE widget with GTK+ 3.0. Homepage: https://wiki.gnome.org/Apps/Terminal/VTE Package: libvte-2.91-common Status: install ok installed Priority: optional Section: libs Installed-Size: 930 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: vte2.91 Version: 0.54.2-2 Conffiles: /etc/profile.d/vte-2.91.sh 0554ef5eca02eb50587dacaabcd1cb20 Description: Terminal emulator widget for GTK+ 3.0 - common files The VTE library provides a terminal emulator widget VteTerminal for applications using the GTK+ toolkit. It also provides the VtePTY object containing functions for starting a new process on a new pseudo-terminal and for manipulating pseudo-terminals. . This package contains internationalization files for the VTE library and common files for the GTK+ 3.x version. Homepage: https://wiki.gnome.org/Apps/Terminal/VTE Package: libvulkan1 Status: install ok installed Priority: optional Section: libs Installed-Size: 365 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: vulkan-loader Version: 1.1.97-2 Replaces: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader Depends: libc6 (>= 2.17) Breaks: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader Description: Vulkan loader library The Loader implements the main VK library. It handles layer management and driver management. The loader fully supports multi-gpu operation. As part of this, it dispatches API calls to the correct driver, and to the correct layers, based on the GPU object selected by the application. . This package includes the loader library. Homepage: https://github.com/KhronosGroup/Vulkan-Loader Package: libwacom-common Status: install ok installed Priority: optional Section: libs Installed-Size: 607 Maintainer: Timo Aaltonen Architecture: all Multi-Arch: foreign Source: libwacom Version: 0.32-1 Replaces: libwacom0 (<= 0.2-1) Description: Wacom model feature query library (common files) libwacom is a library to identify wacom tablets and their model-specific features. It provides easy access to information such as "is this a built-in on-screen tablet", "what is the size of this model", etc. . This package contains common data files for libwacom. Package: libwacom2 Status: install ok installed Priority: optional Section: libs Installed-Size: 62 Maintainer: Timo Aaltonen Architecture: arm64 Multi-Arch: same Source: libwacom Version: 0.32-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.24.0), libgudev-1.0-0 (>= 146), libwacom-common (= 0.32-1) Recommends: libwacom-bin (= 0.32-1) Description: Wacom model feature query library libwacom is a library to identify wacom tablets and their model-specific features. It provides easy access to information such as "is this a built-in on-screen tablet", "what is the size of this model", etc. Package: libwavpack1 Status: install ok installed Priority: optional Section: libs Installed-Size: 177 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: wavpack Version: 5.1.0-6+deb10u1 Depends: libc6 (>= 2.17) Description: audio codec (lossy and lossless) - library WavPack is a completely open audio compression format providing lossless, high-quality lossy, and a unique hybrid compression mode. Although the technology is loosely based on previous versions of WavPack, the new version 4 format has been designed from the ground up to offer unparalleled performance and functionality. . This package contains the shared libraries necessary to run programs using libwavpack. Homepage: http://www.wavpack.com Package: libwayland-client0 Status: install ok installed Priority: optional Section: libs Installed-Size: 80 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: wayland Version: 1.16.0-1 Replaces: libwayland0 (<< 1.1.0-1) Depends: libc6 (>= 2.17), libffi6 (>= 3.2) Conflicts: libwayland0 (<< 1.1.0-1) Description: wayland compositor infrastructure - client library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the client side of the Wayland protocol. Homepage: https://wayland.freedesktop.org/ Package: libwayland-cursor0 Status: install ok installed Priority: optional Section: libs Installed-Size: 49 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: wayland Version: 1.16.0-1 Replaces: libwayland0 (<< 1.1.0-1) Depends: libc6 (>= 2.17), libwayland-client0 (>= 1.3.92) Conflicts: libwayland0 (<< 1.1.0-1) Description: wayland compositor infrastructure - cursor library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships a helper library to manage cursors. Homepage: https://wayland.freedesktop.org/ Package: libwayland-egl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 24 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: wayland Version: 1.16.0-1 Replaces: libwayland-egl1-mesa (<< 18.0.0~rc5-1) Provides: libwayland-egl1-mesa Depends: libc6 (>= 2.17) Breaks: libwayland-egl1-mesa (<< 18.0.0~rc5-1) Description: wayland compositor infrastructure - EGL library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the Wayland EGL platform of the Wayland protocol. Homepage: https://wayland.freedesktop.org/ Package: libwayland-server0 Status: install ok installed Priority: optional Section: libs Installed-Size: 98 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: wayland Version: 1.16.0-1 Replaces: libwayland0 (<< 1.1.0-1) Depends: libc6 (>= 2.17), libffi6 (>= 3.2) Breaks: weston (<< 1.2.0) Conflicts: libwayland0 (<< 1.1.0-1) Description: wayland compositor infrastructure - server library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the server side of the Wayland protocol. Homepage: https://wayland.freedesktop.org/ Package: libwebkit2gtk-4.0-37 Status: hold ok installed Priority: optional Section: libs Installed-Size: 59464 Maintainer: Debian WebKit Maintainers Architecture: arm64 Multi-Arch: same Source: webkit2gtk Version: 2.36.7-1~deb10u1 Depends: libjavascriptcoregtk-4.0-18 (= 2.36.7-1~deb10u1), gstreamer1.0-plugins-base, gstreamer1.0-plugins-good, bubblewrap (>= 0.3.1), xdg-dbus-proxy, libatk1.0-0 (>= 2.11.6), libatomic1 (>= 4.8), libc6 (>= 2.27), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.15.12), libegl1, libenchant1c2a (>= 1.6.0), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libgcc1 (>= 1:4.0), libgcrypt20 (>= 1.8.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libgles2, libglib2.0-0 (>= 2.53.1), libgpg-error0 (>= 1.14), libgstreamer-gl1.0-0 (>= 1.14.0), libgstreamer-plugins-base1.0-0 (>= 1.14.0), libgstreamer1.0-0 (>= 1.14.0), libgtk-3-0 (>= 3.23.0), libharfbuzz-icu0 (>= 0.9.18), libharfbuzz0b (>= 1.4.2), libhyphen0 (>= 2.7.1), libicu63 (>= 63.1-1~), libjpeg62-turbo (>= 1.3.1), libnotify4 (>= 0.7.0), libopenjp2-7 (>= 2.2.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpng16-16 (>= 1.6.2-1), libseccomp2 (>= 0.0.0~20120605), libsecret-1-0 (>= 0.7), libsoup2.4-1 (>= 2.58.2), libsqlite3-0 (>= 3.7.15), libstdc++6 (>= 5.2), libsystemd0, libtasn1-6 (>= 4.12), libwayland-client0 (>= 1.9.91), libwayland-egl1 (>= 1.15.0), libwayland-server0 (>= 1.2.0), libwebp6 (>= 0.5.1), libwebpdemux2 (>= 0.5.1), libwoff1 (>= 1.0.0), libx11-6, libxcomposite1 (>= 1:0.3-1), libxdamage1 (>= 1:1.1), libxml2 (>= 2.7.4), libxrender1, libxslt1.1 (>= 1.1.25), libxt6, zlib1g (>= 1:1.2.0) Recommends: gstreamer1.0-gl, libgl1-mesa-dri, gstreamer1.0-libav, gstreamer1.0-plugins-bad Suggests: xdg-desktop-portal-gtk, gstreamer1.0-alsa Description: Web content engine library for GTK WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers. . It is able to display content such as HTML, SVG, XML, and others. It also supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more. . WebKitGTK is a WebKit port designed to be used in GTK applications. This build provides version 4.0 of the API and uses libsoup v2 for the networking stack. . This package contains the shared libraries. Homepage: https://webkitgtk.org/ Package: libwebp6 Status: install ok installed Priority: optional Section: libs Installed-Size: 415 Maintainer: Jeff Breidenbach Architecture: arm64 Multi-Arch: same Source: libwebp Version: 0.6.1-2+deb10u3 Depends: libc6 (>= 2.17) Description: Lossy compression of digital photographic images. Image Compression format, based on the VP8 codec. WebP uses the modern VP8 compression format to deliver efficient compression of images for the web. More than 30% extra gain over optimized JPEG, for same quality, is not unusual. Homepage: https://developers.google.com/speed/webp/ Package: libwebpdemux2 Status: install ok installed Priority: optional Section: libs Installed-Size: 108 Maintainer: Jeff Breidenbach Architecture: arm64 Multi-Arch: same Source: libwebp Version: 0.6.1-2+deb10u3 Depends: libc6 (>= 2.17), libwebp6 (>= 0.5.1) Description: Lossy compression of digital photographic images. Image Compression format, based on the VP8 codec. WebP uses the modern VP8 compression format to deliver efficient compression of images for the web. More than 30% extra gain over optimized JPEG, for same quality, is not unusual. Homepage: https://developers.google.com/speed/webp/ Package: libwebpmux3 Status: install ok installed Priority: optional Section: libs Installed-Size: 129 Maintainer: Jeff Breidenbach Architecture: arm64 Multi-Arch: same Source: libwebp Version: 0.6.1-2+deb10u3 Depends: libc6 (>= 2.17), libwebp6 (>= 0.5.1) Description: Lossy compression of digital photographic images. Image Compression format, based on the VP8 codec. WebP uses the modern VP8 compression format to deliver efficient compression of images for the web. More than 30% extra gain over optimized JPEG, for same quality, is not unusual. Homepage: https://developers.google.com/speed/webp/ Package: libwebrtc-audio-processing1 Status: install ok installed Priority: optional Section: libs Installed-Size: 645 Maintainer: Pulseaudio maintenance team Architecture: arm64 Multi-Arch: same Source: webrtc-audio-processing Version: 0.3-1 Depends: libc6 (>= 2.17), libgcc1 (>= 1:4.0), libstdc++6 (>= 5.2) Description: AudioProcessing module from the WebRTC project. Audio processing library (echo-cancellation, gain control etc) around the AudioProcessing module from the WebRTC project Homepage: http://freedesktop.org/software/pulseaudio/webrtc-audio-processing/ Package: libwildmidi2 Status: install ok installed Priority: optional Section: libs Installed-Size: 154 Maintainer: Bret Curtis Architecture: arm64 Multi-Arch: same Source: wildmidi Version: 0.4.3-1 Replaces: libwildmidi0 Depends: libc6 (>= 2.17) Suggests: libwildmidi-config Description: software MIDI player library MIDI streaming library designed to process a MIDI file using sound patches and stream the results as stereo audio data through a buffer which an external program can then process further. Homepage: http://www.mindwerks.net/projects/wildmidi/ Package: libwnck-common Status: install ok installed Priority: optional Section: libs Installed-Size: 1872 Maintainer: Mike Gabriel Architecture: all Multi-Arch: foreign Source: libwnck Version: 2.30.7-6 Conflicts: libwnck-1 Description: Window Navigator Construction Kit - common files A library to use for writing pagers and task lists. This version of libwnck provides WNCK for GTK-2 based applications. . This package contains internationalization files. Homepage: https://developer.gnome.org/libwnck/2.30/ Package: libwnck22 Status: install ok installed Priority: optional Section: libs Installed-Size: 338 Maintainer: Mike Gabriel Architecture: arm64 Multi-Arch: same Source: libwnck Version: 2.30.7-6 Replaces: libwnck-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk2.0-0 (>= 2.24.32), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libstartup-notification0 (>= 0.4), libx11-6, libxres1, libwnck-common Conflicts: libwnck-1 Description: Window Navigator Construction Kit - runtime files A library to use for writing pagers and task lists. This variant of libwnck provides WNCK for GTK-2 based applications. . This package contains runtime files. Homepage: https://developer.gnome.org/libwnck/2.30/ Package: libwoff1 Status: install ok installed Priority: optional Section: libs Installed-Size: 122 Maintainer: Debian Fonts Task Force Architecture: arm64 Multi-Arch: same Source: woff2 Version: 1.0.2-1 Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Description: library for converting fonts to WOFF 2.0 woff2 is a library for converting fonts from the TTF format to the WOFF 2.0 format. The library also allows decompression from WOFF 2.0 to TTF. . The WOFF 2.0 format uses the Brotli compression algorithm to compress fonts suitable for use in CSS @font-face rules. WOFF 2.0 is a W3C Candidate Recommendation. Homepage: https://github.com/google/woff2 Package: libwrap0 Status: install ok installed Priority: optional Section: libs Installed-Size: 108 Maintainer: Marco d'Itri Architecture: arm64 Multi-Arch: same Source: tcp-wrappers Version: 7.6.q-28 Depends: libc6 (>= 2.17) Description: Wietse Venema's TCP wrappers library Wietse Venema's network logger, also known as TCPD or LOG_TCP. . These programs log the client host name of incoming telnet, ftp, rsh, rlogin, finger etc. requests. . Security options are: - access control per host, domain and/or service; - detection of host name spoofing or host address spoofing; - booby traps to implement an early-warning system. Package: libwww-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 411 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 6.36-2 Depends: perl, ca-certificates, libencode-locale-perl, libfile-listing-perl, libhtml-parser-perl, libhtml-tagset-perl, libhtml-tree-perl, libhttp-cookies-perl, libhttp-date-perl, libhttp-message-perl (>= 6.18) | libhttp-message-perl (<< 6.17), libhttp-negotiate-perl, liblwp-mediatypes-perl, liblwp-protocol-https-perl, libnet-http-perl (>= 6.07), libtry-tiny-perl, liburi-perl, libwww-robotrules-perl, netbase Recommends: libdata-dump-perl, libhtml-form-perl, libhtml-format-perl, libhttp-daemon-perl, libmailtools-perl Suggests: libauthen-ntlm-perl Breaks: fusioninventory-agent (<< 2.1.8-2), gsutil (<< 3.1-1), libfrontier-rpc-perl (<< 0.07b4-6), libhttp-daemon-ssl-perl (<< 1.04-3), libhttp-proxy-perl (<< 0.24-2), libhttp-request-ascgi-perl (<< 1.2-2), libhttp-request-params-perl (<< 1.01-6), libjson-rpc-perl (<< 0.96-3), libpoe-perl (<< 2:1.2990-2), librpc-xml-perl (<< 0.74-2), libsoap-lite-perl (<< 0.7.12-3), libwww-mechanize-formfiller-perl (<< 0.10-2), libwww-mechanize-perl (<< 1.66-2), satutils (<= 0.6), tidy-proxy (<< 0.97-4) Description: simple and consistent interface to the world-wide web libwww-perl (also known as LWP) is a collection of Perl modules that provide a simple and consistent programming interface (API) to the World-Wide Web. The main focus of the library is to provide classes and functions that allow you to write WWW clients. It also contains general purpose modules, as well as a simple HTTP/1.1-compatible server implementation. Homepage: https://metacpan.org/release/libwww-perl Package: libwww-robotrules-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 36 Maintainer: Debian Perl Group Architecture: all Version: 6.02-1 Replaces: libwww-perl (<< 6.00) Depends: perl, liburi-perl Breaks: libwww-perl (<< 6.00) Description: database of robots.txt-derived permissions WWW::RobotRules parses /robots.txt files as specified in "A Standard for Robot Exclusion", at . Webmasters can use the /robots.txt file to forbid conforming robots from accessing parts of their web site. . The parsed files are kept in a WWW::RobotRules object, and this object provides methods to check if access to a given URL is prohibited. The same WWW::RobotRules object can be used for one or more parsed /robots.txt files on any number of hosts. Homepage: https://metacpan.org/release/WWW-RobotRules Package: libx11-6 Status: install ok installed Priority: optional Section: libs Installed-Size: 1531 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libx11 Version: 2:1.6.7-1+deb10u4 Depends: libc6 (>= 2.17), libxcb1 (>= 1.11.1), libx11-data Description: X11 client-side library This package provides a client interface to the X Window System, otherwise known as 'Xlib'. It provides a complete API for the basic functions of the window system. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libX11 Package: libx11-data Status: install ok installed Priority: optional Section: x11 Installed-Size: 1674 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: libx11 Version: 2:1.6.7-1+deb10u4 Breaks: libx11-6 (<< 2:1.4.1) Description: X11 client-side library This package provides the locale data files for libx11. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libX11 Package: libx11-xcb1 Status: install ok installed Priority: optional Section: libs Installed-Size: 242 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libx11 Version: 2:1.6.7-1+deb10u4 Depends: libc6 (>= 2.17) Description: Xlib/XCB interface library libX11-xcb provides functions needed by clients which take advantage of Xlib/XCB to mix calls to both Xlib and XCB over the same X connection. . More information about X.Org can be found at: . More information about XCB can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libX11 Package: libx264-155 Status: install ok installed Priority: optional Section: libs Installed-Size: 1335 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: x264 Version: 2:0.155.2917+git0a84d98-2 Depends: libc6 (>= 2.17) Description: x264 video coding library libx264 is an advanced encoding library for creating H.264 (MPEG-4 AVC) video streams. . This package contains the libx264 shared library. Homepage: http://www.videolan.org/developers/x264.html Package: libx265-165 Status: install ok installed Priority: optional Section: libs Installed-Size: 2779 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: x265 Version: 2.9-4 Depends: libc6 (>= 2.17), libnuma1 (>= 2.0.11), libstdc++6 (>= 4.1.1) Description: H.265/HEVC video stream encoder (shared library) libx265 is an encoding library for creating H.265/High Efficiency Video Coding (HEVC) video streams. . This package contains the shared library. Homepage: http://x265.org Package: libxau6 Status: install ok installed Priority: optional Section: libs Installed-Size: 39 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxau (1:1.0.8-1) Version: 1:1.0.8-1+b2 Depends: libc6 (>= 2.17) Description: X11 authorisation library This package provides the main interface to the X11 authorisation handling, which controls authorisation for X connections, both client-side and server-side. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXau Package: libxaw7 Status: install ok installed Priority: optional Section: libs Installed-Size: 445 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxaw (2:1.0.13-1) Version: 2:1.0.13-1+b2 Depends: libc6 (>= 2.17), libx11-6, libxext6, libxmu6, libxpm4, libxt6 Description: X11 Athena Widget library libXaw7 provides the second version of Xaw, the Athena Widgets toolkit, which is largely used by legacy X applications. This version is the most common version, as version 6 is considered deprecated, and version 8, which adds Xprint support, is unsupported and not widely used. In general, use of a more modern toolkit such as GTK+ is recommended. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXaw Package: libxcb-dri2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 125 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 Description: X C Binding, dri2 extension This package contains the library files needed to run software using libxcb-dri2, the dri2 extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-dri3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 122 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 (>= 1.12) Description: X C Binding, dri3 extension This package contains the library files needed to run software using libxcb-dri3, the dri3 extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-glx0 Status: install ok installed Priority: optional Section: libs Installed-Size: 230 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 Description: X C Binding, glx extension This package contains the library files needed to run software using libxcb-glx, the glx extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-icccm4 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: xcb-util-wm Version: 0.4.1-1.1 Depends: libc6 (>= 2.17), libxcb1 Description: utility libraries for X C Binding -- icccm This package contains the library files needed to run software using libxcb-icccm, providing client and window-manager helpers for ICCCM. . The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib. Homepage: https://xcb.freedesktop.org Package: libxcb-image0 Status: install ok installed Priority: extra Section: libs Installed-Size: 47 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: xcb-util-image (0.4.0-1) Version: 0.4.0-1+b2 Depends: libc6 (>= 2.17), libxcb-shm0, libxcb-util0 (>= 0.3.8), libxcb1 Description: utility libraries for X C Binding -- image This package contains the library files needed to run software using libxcb-image, providing port of Xlib's XImage and XShmImage functions. . The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib. Homepage: http://xcb.freedesktop.org Package: libxcb-keysyms1 Status: install ok installed Priority: extra Section: libs Installed-Size: 38 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: xcb-util-keysyms (0.4.0-1) Version: 0.4.0-1+b2 Depends: libc6 (>= 2.17), libxcb1 Description: utility libraries for X C Binding -- keysyms This package contains the library files needed to run software using libxcb-keysyms, providing standard X key constants and conversion to/from keycodes. . The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib. Homepage: http://xcb.freedesktop.org Package: libxcb-present0 Status: install ok installed Priority: optional Section: libs Installed-Size: 115 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 Description: X C Binding, present extension This package contains the library files needed to run software using libxcb-present, the present extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-randr0 Status: install ok installed Priority: optional Section: libs Installed-Size: 182 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 (>= 1.9.2) Description: X C Binding, randr extension This package contains the library files needed to run software using libxcb-randr, the randr extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-render-util0 Status: install ok installed Priority: extra Section: libs Installed-Size: 44 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: xcb-util-renderutil (0.3.9-1) Version: 0.3.9-1+b1 Depends: libc6 (>= 2.17), libxcb-render0, libxcb1 Description: utility libraries for X C Binding -- render-util This package contains the library files needed to run software using libxcb-render-util, providing convenience functions for the Render extension. . The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib. Homepage: http://xcb.freedesktop.org Package: libxcb-render0 Status: install ok installed Priority: optional Section: libs Installed-Size: 166 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 (>= 1.8) Description: X C Binding, render extension This package contains the library files needed to run software using libxcb-render, the render extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-shape0 Status: install ok installed Priority: optional Section: libs Installed-Size: 120 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 Description: X C Binding, shape extension This package contains the library files needed to run software using libxcb-shape, the shape extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-shm0 Status: install ok installed Priority: optional Section: libs Installed-Size: 119 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 (>= 1.12) Description: X C Binding, shm extension This package contains the library files needed to run software using libxcb-shm, the shm extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-sync1 Status: install ok installed Priority: optional Section: libs Installed-Size: 135 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 Description: X C Binding, sync extension This package contains the library files needed to run software using libxcb-sync, the sync extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-util0 Status: install ok installed Priority: extra Section: libs Installed-Size: 57 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: xcb-util (0.3.8-3) Version: 0.3.8-3+b2 Depends: libc6 (>= 2.17), libxcb1 Description: utility libraries for X C Binding -- atom, aux and event This package contains the library files needed to run software using libxcb-util. . The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib. Homepage: http://xcb.freedesktop.org Package: libxcb-xf86dri0 Status: install ok installed Priority: optional Section: libs Installed-Size: 125 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 Description: X C Binding, xf86dri extension This package contains the library files needed to run software using libxcb-xf86dri, the xf86dri extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-xfixes0 Status: install ok installed Priority: optional Section: libs Installed-Size: 139 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 Description: X C Binding, xfixes extension This package contains the library files needed to run software using libxcb-xfixes, the xfixes extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-xkb1 Status: install ok installed Priority: optional Section: libs Installed-Size: 233 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 Description: X C Binding, XKEYBOARD extension This package contains the library files needed to run software using libxcb-xkb, the XKEYBOARD extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-xv0 Status: install ok installed Priority: optional Section: libs Installed-Size: 136 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxcb1 Description: X C Binding, xv extension This package contains the library files needed to run software using libxcb-xv, the xv extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb1 Status: install ok installed Priority: optional Section: libs Installed-Size: 282 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcb Version: 1.13.1-2 Depends: libc6 (>= 2.17), libxau6, libxdmcp6 Breaks: alsa-utils (<< 1.0.24.2-5) Description: X C Binding This package contains the library files needed to run software using libxcb, the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcomposite1 Status: install ok installed Priority: optional Section: libs Installed-Size: 35 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcomposite Version: 1:0.4.4-2 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.4.99.1) Description: X11 Composite extension library libXcomposite provides an X Window System client interface to the Composite extension to the X protocol. . The Composite extension allows clients called compositing managers to control the final drawing of the screen. Rendering is done into an off-screen buffer. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXcomposite Package: libxcursor1 Status: install ok installed Priority: optional Section: libs Installed-Size: 75 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxcursor Version: 1:1.1.15-2 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.4.99.1), libxfixes3, libxrender1 Description: X cursor management library Xcursor is a simple library designed to help locate and load cursors for the X Window System. Cursors can be loaded from files or memory and can exist in several sizes; the library automatically picks the best size. When using images loaded from files, Xcursor prefers to use the Render extension's CreateCursor request for rendering cursors. Where the Render extension is not supported, Xcursor maps the cursor image to a standard X cursor and uses the core X protocol CreateCursor request. . Preferred themes for cursors can be installed if desired, via xcursor-themes or other cursor-theme or icon-theme packages, configured with update-alternatives --config x-cursor-theme. Homepage: https://www.x.org Package: libxdamage1 Status: install ok installed Priority: optional Section: libs Installed-Size: 34 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxdamage (1:1.1.4-3) Version: 1:1.1.4-3+b3 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.4.99.1), libxfixes3 Description: X11 damaged region extension library libXdamage provides an X Window System client interface to the DAMAGE extension to the X protocol. . The Damage extension provides for notification of when on-screen regions have been 'damaged' (altered). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXdamage Homepage: https://www.x.org Package: libxdmcp6 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxdmcp Version: 1:1.1.2-3 Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.17) Description: X11 Display Manager Control Protocol library This package provides the main interface to the X11 display manager control protocol library, which allows for remote logins to display managers. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXdmcp Package: libxext6 Status: install ok installed Priority: optional Section: libs Installed-Size: 116 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxext (2:1.3.3-1) Version: 2:1.3.3-1+b2 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0) Description: X11 miscellaneous extension library libXext provides an X Window System client interface to several extensions to the X protocol. . The supported protocol extensions are: - DOUBLE-BUFFER (DBE), the Double Buffer extension; - DPMS, the VESA Display Power Management System extension; - Extended-Visual-Information (EVI), an extension for gathering extra information about the X server's visuals; - LBX, the Low Bandwidth X extension; - MIT-SHM, the MIT X client/server shared memory extension; - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT; - Multi-Buffering, the multi-buffering and stereo display extension; - SECURITY, the X security extension; - SHAPE, the non-rectangular shaped window extension; - SYNC, the X synchronization extension; - TOG-CUP, the Open Group's Colormap Utilization extension; - XC-APPGROUP, the X Consortium's Application Group extension; - XC-MISC, the X Consortium's resource ID querying extension; - XTEST, the X test extension (this is one of two client-side implementations; the other is in the libXtst library, provided by the libxtst6 package); . libXext also provides a small set of utility functions to aid authors of client APIs for X protocol extensions. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXext Package: libxfce4panel-2.0-4 Status: install ok installed Priority: optional Section: libs Installed-Size: 300 Maintainer: Debian Xfce Maintainers Architecture: arm64 Source: xfce4-panel Version: 4.12.2-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libdbus-glib-1-2 (>= 0.78), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.1.6), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libxfce4util7 (>= 4.9.0) Description: Xfce4 panel libraries (GTK3 variant) This package contains library (GTK3 variant) used by the various plugins for the Xfce panel. Homepage: http://www.xfce.org/ Package: libxfce4ui-2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 198 Maintainer: Debian Xfce Maintainers Architecture: arm64 Multi-Arch: same Source: libxfce4ui Version: 4.12.1-3 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.78), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.9.12), libice6 (>= 1:1.0.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libsm6, libstartup-notification0 (>= 0.4), libx11-6, libxfce4util7 (>= 4.9.0), libxfconf-0-2 (>= 4.6.0), libxfce4ui-common (>= 4.11) Description: widget library for Xfce - Gtk+3 variant libxfce4ui is used to share commonly used Xfce widgets among the Xfce applications. . This package provides the Gtk+3 variant of libxfce4ui. Homepage: http://www.xfce.org/ Package: libxfce4ui-common Status: install ok installed Priority: optional Section: xfce Installed-Size: 1294 Maintainer: Debian Xfce Maintainers Architecture: all Multi-Arch: foreign Source: libxfce4ui Version: 4.12.1-3 Replaces: libxfce4ui-1-0 (<< 4.11), libxfce4ui-1-dev (<< 4.11), xfce-keyboard-shortcuts (<< 4.11) Provides: xfce-keyboard-shortcuts Suggests: libxfce4ui-2-0 | libxfce4ui-1-0, devhelp Breaks: libxfce4ui-1-0 (<< 4.11), libxfce4ui-1-dev (<< 4.11), xfce-keyboard-shortcuts (<< 4.11) Conffiles: /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-keyboard-shortcuts.xml 65d7008f598ba5cd1e193a0f2950fbf3 Description: common files for libxfce4ui This package contains the common files for both variants of libxfce4ui. Homepage: http://www.xfce.org/ Package: libxfce4util-common Status: install ok installed Priority: optional Section: xfce Installed-Size: 543 Maintainer: Debian Xfce Maintainers Architecture: all Multi-Arch: foreign Source: libxfce4util Version: 4.12.1-3 Replaces: libxfce4util4 (<< 4.6.1-2) Breaks: libxfce4util4 (<< 4.6.1-2) Description: common files for libxfce4util This package contains various infrastructure-independant common files for libxfce4util, the Xfce utility library. Homepage: http://www.xfce.org/ Package: libxfce4util7 Status: install ok installed Priority: optional Section: xfce Installed-Size: 119 Maintainer: Debian Xfce Maintainers Architecture: arm64 Multi-Arch: same Source: libxfce4util Version: 4.12.1-3 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.35.9), libxfce4util-common Recommends: libxfce4util-bin Description: Utility functions library for Xfce4 This package contains libxfce4util7, the basic utility function library for Xfce4. If you intend to run Xfce4, you need this library. Homepage: http://www.xfce.org/ Package: libxfconf-0-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 148 Maintainer: Debian Xfce Maintainers Architecture: arm64 Source: xfconf Version: 4.12.1-1 Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.41.1), xfconf Description: Client library for Xfce4 configure interface This package contains a library which can be used by every program that aims to be a configuration-manager for Xfce4. . If you intend to use Xfce4, you definitely want to install this package. Homepage: http://www.xfce.org Package: libxfixes3 Status: install ok installed Priority: optional Section: libs Installed-Size: 52 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxfixes Version: 1:5.0.3-1 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0) Description: X11 miscellaneous 'fixes' extension library libXfixes provides an X Window System client interface to the 'XFIXES' extension to the X protocol. . It provides support for Region types, and some cursor functions. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXfixes Package: libxfont2 Status: install ok installed Priority: optional Section: libs Installed-Size: 223 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxfont Version: 1:2.0.3-1 Depends: libbz2-1.0, libc6 (>= 2.17), libfontenc1, libfreetype6 (>= 2.2.1), zlib1g (>= 1:1.1.4) Breaks: xfs (<< 1:1.1.4) Description: X11 font rasterisation library libXfont provides various services for X servers, most notably font selection and rasterisation (through external libraries). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXfont Package: libxft2 Status: install ok installed Priority: optional Section: libs Installed-Size: 110 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: xft Version: 2.3.2-2 Depends: libc6 (>= 2.17), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.3.5), libx11-6, libxrender1 Description: FreeType-based font drawing library for X Xft provides a client-side font API for X applications, making the FreeType font rasterizer available to X clients. Fontconfig is used for font specification resolution. Where available, the RENDER extension handles glyph drawing; otherwise, the core X protocol is used. Package: libxi6 Status: install ok installed Priority: optional Section: libs Installed-Size: 132 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxi Version: 2:1.7.9-1 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 Input extension library libXi provides an X Window System client interface to the XINPUT extension to the X protocol. . The Input extension allows setup and configuration of multiple input devices, and hotplugging of input devices (to be added and removed on the fly). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXi Homepage: https://www.x.org/ Package: libxinerama1 Status: install ok installed Priority: optional Section: libs Installed-Size: 39 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxinerama Version: 2:1.1.4-2 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 Xinerama extension library libXinerama provides an X Window System client interface to the XINERAMA extension to the X protocol. . The Xinerama (also known as panoramiX) extension allows for multiple screens attached to a single display to be treated as belonging together, and to give desktop applications a better idea of the monitor layout. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXinerama Package: libxkbcommon0 Status: install ok installed Priority: optional Section: libs Installed-Size: 296 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxkbcommon Version: 0.8.2-1 Depends: xkb-data, libc6 (>= 2.17) Description: library interface to the XKB compiler - shared library This package provides a library to handle keyboard descriptions, including loading them from disk, parsing them and handling their state. It's mainly meant for client toolkits, window systems, and other system applications; currently that includes Wayland, kmscon, GTK+, Clutter, and more. . More information about X.Org can be found at: . This module can be found at https://github.com/xkbcommon/libxkbcommon.git Homepage: http://www.xkbcommon.org/ Package: libxkbfile1 Status: install ok installed Priority: optional Section: libs Installed-Size: 180 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxkbfile (1:1.0.9-2) Version: 1:1.0.9-2+b11 Depends: libc6 (>= 2.17), libx11-6 Description: X11 keyboard file manipulation library libxkbfile provides an interface to read and manipulate description files for XKB, the X11 keyboard configuration extension. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libxkbfile Package: libxklavier16 Status: install ok installed Priority: optional Section: libs Installed-Size: 141 Maintainer: Debian GNOME Maintainers Architecture: arm64 Multi-Arch: same Source: libxklavier Version: 5.4-4 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), libx11-6, libxi6 (>= 2:1.1.2), libxkbfile1, libxml2 (>= 2.7.4), xkb-data (>= 0.8), x11-xkb-utils Suggests: iso-codes Description: X Keyboard Extension high-level API Libxklavier provides programmers an API for high(er) level access to the X Keyboard Extension, to ease creating XKB related applications. Homepage: https://www.freedesktop.org/wiki/Software/LibXklavier Package: libxml-parser-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 576 Maintainer: Debian Perl Group Architecture: arm64 Version: 2.44-4 Depends: perl (>= 5.28.1-4), perlapi-5.28.1, libc6 (>= 2.17), libexpat1 (>= 2.0.1), liburi-perl, libwww-perl Description: Perl module for parsing XML files The XML::Parser module provides ways to parse XML documents. It is built on top of XML::Parser::Expat, which is a lower level interface to James Clark's expat library. Each call to one of the parsing methods creates a new instance of XML::Parser::Expat which is then used to parse the document. Expat options may be provided when the XML::Parser object is created. These options are then passed on to the Expat object on each parse call. They can also be given as extra arguments to the parse methods, in which case they override options given at XML::Parser creation time. . The behavior of the parser is controlled either by Style and/or Handlers options, or by setHandlers method. These all provide mechanisms for XML::Parser to set the handlers needed by XML::Parser::Expat. If neither Style nor Handlers are specified, then parsing just checks the document for being well-formed. . When underlying handlers get called, they receive as their first parameter the Expat object, not the Parser object. Homepage: http://www.libexpat.org/ Package: libxml-twig-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 565 Maintainer: Bart Martens Architecture: all Version: 1:3.50-1.1 Depends: perl, libxml-parser-perl Recommends: libtext-iconv-perl, libtie-ixhash-perl, libxml-xpathengine-perl | libxml-xpath-perl, libwww-perl, libhtml-parser-perl Suggests: libunicode-map8-perl, libunicode-string-perl, xml-twig-tools Description: Perl module for processing huge XML documents in tree mode This module provides a way to process XML documents. It is built on top of XML::Parser. . The module offers a tree interface to the document, while allowing to output the parts of it that have been completely processed. . It allows minimal resource (CPU and memory) usage by building the tree only for the parts of the documents that need actual processing, through the use of the twig_roots and twig_print_outside_roots options. The finish and finish_print methods also help to increase performance. . XML::Twig tries to make simple things easy so it tries its best to takes care of a lot of the (usually) annoying (but sometimes necessary) features that come with XML and XML::Parser. Homepage: http://www.xmltwig.org/ Package: libxml2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1809 Maintainer: Debian XML/SGML Group Architecture: arm64 Multi-Arch: same Version: 2.9.4+dfsg1-7+deb10u6 Depends: libc6 (>= 2.28), libicu63 (>= 63.1-1~), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3) Description: GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . This package provides a library providing an extensive API to handle such XML data files. Homepage: http://xmlsoft.org Package: libxml2-utils Status: install ok installed Priority: optional Section: text Installed-Size: 168 Maintainer: Debian XML/SGML Group Architecture: arm64 Multi-Arch: foreign Source: libxml2 Version: 2.9.4+dfsg1-7+deb10u6 Depends: libc6 (>= 2.17), libxml2 (>= 2.9.0) Description: XML utilities XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . This package provides xmllint, a tool for validating and reformatting XML documents, and xmlcatalog, a tool to parse and manipulate XML or SGML catalog files. Homepage: http://xmlsoft.org Package: libxmu6 Status: install ok installed Priority: optional Section: libs Installed-Size: 137 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxmu (2:1.1.2-2) Version: 2:1.1.2-2+b3 Depends: libc6 (>= 2.17), libx11-6, libxext6, libxt6 Description: X11 miscellaneous utility library libXmu provides a set of miscellaneous utility convenience functions for X libraries to use. libXmuu is a lighter-weight version that does not depend on libXt or libXext; for more information, see libxmuu1. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXmu Package: libxmuu1 Status: install ok installed Priority: optional Section: libs Installed-Size: 51 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxmu (2:1.1.2-2) Version: 2:1.1.2-2+b3 Depends: libc6 (>= 2.17), libx11-6 Description: X11 miscellaneous micro-utility library libXmuu provides a set of miscellaneous utility convenience functions for X libraries to use. It is a lighter version of libXmu that does not depend on libXt or libXext; for more information on libXmu, see libxmu6. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXmu Package: libxpm4 Status: install ok installed Priority: optional Section: libs Installed-Size: 101 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxpm Version: 1:3.5.12-1+deb10u2 Depends: libc6 (>= 2.17), libx11-6 Description: X11 pixmap library The X PixMap image format is an extension of the monochrome X BitMap format specified in the X protocol, and is commonly used in traditional X applications. . This package provides runtime support for XPM format. Homepage: https://www.x.org Package: libxrandr2 Status: install ok installed Priority: optional Section: libs Installed-Size: 78 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxrandr Version: 2:1.5.1-1 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0), libxext6, libxrender1 Description: X11 RandR extension library libXrandr provides an X Window System client interface to the RandR extension to the X protocol. . The RandR extension allows for run-time configuration of display attributes such as resolution, rotation, and reflection. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXrandr Package: libxrender1 Status: install ok installed Priority: optional Section: libs Installed-Size: 66 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxrender Version: 1:0.9.10-1 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0) Description: X Rendering Extension client library The X Rendering Extension (Render) introduces digital image composition as the foundation of a new rendering model within the X Window System. Rendering geometric figures is accomplished by client-side tessellation into either triangles or trapezoids. Text is drawn by loading glyphs into the server and rendering sets of them. The Xrender library exposes this extension to X clients. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXrender Package: libxres1 Status: install ok installed Priority: optional Section: libs Installed-Size: 37 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxres Version: 2:1.2.0-2 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 Resource extension library libXRes provides an X Window System client interface to the Resource extension to the X protocol. . The Resource extension allows for X clients to see and monitor the X resource usage of various clients (pixmaps, et al). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXRes Homepage: https://www.x.org Package: libxshmfence1 Status: install ok installed Priority: optional Section: libs Installed-Size: 29 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxshmfence Version: 1.3-1 Depends: libc6 (>= 2.27) Description: X shared memory fences - shared library This library provides an interface to shared-memory fences for synchronization between the X server and direct-rendering clients. . This package contains the xshmfence shared library. Package: libxslt1.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 485 Maintainer: Debian XML/SGML Group Architecture: arm64 Multi-Arch: same Source: libxslt Version: 1.1.32-2.2~deb10u2 Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libxml2 (>= 2.9.0) Description: XSLT 1.0 processing library - runtime library XSLT is an XML language for defining transformations of XML files from XML to some other arbitrary format, such as XML, HTML, plain text, etc. using standard XSLT stylesheets. libxslt is a C library which implements XSLT version 1.0. . This package contains the libxslt library used by applications for XSLT transformations. Homepage: http://xmlsoft.org/xslt/ Package: libxt6 Status: install ok installed Priority: optional Section: libs Installed-Size: 465 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxt (1:1.1.5-1) Version: 1:1.1.5-1+b3 Depends: libc6 (>= 2.17), libice6 (>= 1:1.0.0), libsm6, libx11-6 Description: X11 toolkit intrinsics library libXt provides the X Toolkit Intrinsics, an abstract widget library upon which other toolkits are based. Xt is the basis for many toolkits, including the Athena widgets (Xaw), and LessTif (a Motif implementation). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXt Package: libxtables12 Status: install ok installed Priority: optional Section: libs Installed-Size: 141 Maintainer: Debian Netfilter Packaging Team Architecture: arm64 Multi-Arch: same Source: iptables Version: 1.8.2-4 Replaces: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1) Depends: libc6 (>= 2.28) Breaks: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1) Description: netfilter xtables library The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . This package contains the user-space interface to the Netfilter xtables kernel framework. Homepage: http://www.netfilter.org/ Package: libxtst6 Status: install ok installed Priority: optional Section: libs Installed-Size: 57 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxtst Version: 2:1.2.3-1 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0), libxext6, libxi6, x11-common Description: X11 Testing -- Record extension library libXtst provides an X Window System client interface to the Record extension to the X protocol. . The Record extension allows X clients to synthesise input events, which is useful for automated testing. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXtst Package: libxv1 Status: install ok installed Priority: optional Section: libs Installed-Size: 49 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxv Version: 2:1.0.11-1 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 Video extension library libXv provides an X Window System client interface to the XVideo extension to the X protocol. . The XVideo extension allows for accelerated drawing of videos. Hardware adaptors are exposed to clients, which may draw in a number of colourspaces, including YUV. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXv Package: libxvidcore4 Status: install ok installed Priority: optional Section: libs Installed-Size: 466 Maintainer: Debian Multimedia Maintainers Architecture: arm64 Multi-Arch: same Source: xvidcore Version: 2:1.3.5-1 Depends: libc6 (>= 2.17) Description: Open source MPEG-4 video codec (library) Xvid (formerly XviD) is an open source MPEG-4 video codec, implementing MPEG-4 Simple Profile, Advanced Simple Profile, and Advanced Video Coding standards. It is written in C with assembler optimizations for quality and speed (including MMX, SSE, and 3Dnow! code for i386 and AltiVec for PowerPC), and is especially optimized towards offline, multi-pass compression for storage and archival purposes. . This package contains the shared library. Homepage: http://www.xvid.org/ Package: libxxf86dga1 Status: install ok installed Priority: optional Section: libs Installed-Size: 50 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxxf86dga (2:1.1.4-1) Version: 2:1.1.4-1+b3 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 Direct Graphics Access extension library libXxf86dga provides the XFree86-DGA extension, which allows direct graphics access to a framebuffer-like region, and also allows relative mouse reporting, et al. It is mainly used by games and emulators for games. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXxf86dga Package: libxxf86vm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 46 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: same Source: libxxf86vm (1:1.1.4-1) Version: 1:1.1.4-1+b2 Depends: libc6 (>= 2.17), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 XFree86 video mode extension library libXxf86vm provides an interface to the XFree86-VidModeExtension extension, which allows client applications to get and set video mode timings in extensive detail. It is used by the xvidtune program in particular. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm Package: libzbar0 Status: install ok installed Priority: optional Section: libs Installed-Size: 272 Maintainer: Debian QA Group Architecture: arm64 Multi-Arch: same Source: zbar Version: 0.22-1+deb10u1 Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libice6 (>= 1:1.0.0), libjpeg62-turbo (>= 1.3.1), libsm6, libv4l-0 (>= 0.5.0), libx11-6 Description: bar code scanner and decoder (library) ZBar is a library for scanning and decoding bar codes from various sources such as video streams, image files or raw intensity sensors. It supports EAN-13/UPC-A, UPC-E, EAN-8, Code 128, Code 39, Interleaved 2 of 5 and QR Code. . This package contains the library. Homepage: https://github.com/mchehab/zbar Package: libzstd1 Status: install ok installed Priority: optional Section: libs Installed-Size: 574 Maintainer: Debian Med Packaging Team Architecture: arm64 Multi-Arch: same Source: libzstd Version: 1.3.8+dfsg-3+deb10u2 Depends: libc6 (>= 2.17) Description: fast lossless compression algorithm Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting real-time compression scenarios at zlib-level compression ratio. . This package contains the shared library. Homepage: https://github.com/facebook/zstd Package: libzvbi-common Status: install ok installed Priority: optional Section: devel Installed-Size: 169 Maintainer: Joao Eriberto Mota Filho Architecture: all Multi-Arch: foreign Source: zvbi Version: 0.2.35-16 Replaces: libzvbi-0.1 (<= 0.2.1-3) Description: Vertical Blanking Interval decoder (VBI) - common files The vertical blanking interval (VBI) is an interval in a television signal that temporarily suspends transmission of the signal for the electron gun to move back up to the first line of the television screen to trace the next screen field. . The vertical blanking interval can be used to carry data, since anything sent during the VBI would naturally not be displayed; various test signals, closed captioning, and other digital data can be sent during this time period. These include information like closed-caption data, Teletext (primarily in Europe), and now Intercast and the ATVEC Internet television encodings. . The Zapping VBI library, in short ZVBI, provides functions to capture and decode VBI data. It is written in plain ANSI C with few dependencies on other tools and libraries, licensed under GPL. Some features: * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced VBI data from Linux DVB devices; * Implements a VBI Proxy to share one VBI device between multiple applications; * Has a robust and versatile bit slicer which handles a wide range of data services; * Functions to capture multiple data services at once, such as Closed Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS; * Level 3.5 Teletext decoder with support for all Teletext character sets, graphics, 4096 colors, with built-in page cache including search functions; * Closed Caption decoder which supports roll-up, pop-up and paint-on style caption, color, expanded character set, text attributes and free text placement; * Renders Teletext and Caption pages, can export to HTML, PNG and other formats. * Can determine network names; * Can find Teletext subtitle and program pages; * Functions to extract data transmissions in Teletext streams (currently Page Format Clear and Independent Data Line Format A); * Can multiplex and demultiplex DVB VBI PES and TS streams. . This package contains internationalization files. Homepage: http://zapping.sf.net/ZVBI Package: libzvbi0 Status: install ok installed Priority: optional Section: libs Installed-Size: 700 Maintainer: Joao Eriberto Mota Filho Architecture: arm64 Multi-Arch: same Source: zvbi Version: 0.2.35-16 Replaces: libzvbi-0.1 (<= 0.2.1-3) Depends: libc6 (>= 2.17), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4), libzvbi-common (= 0.2.35-16) Description: Vertical Blanking Interval decoder (VBI) - runtime files The vertical blanking interval (VBI) is an interval in a television signal that temporarily suspends transmission of the signal for the electron gun to move back up to the first line of the television screen to trace the next screen field. . The vertical blanking interval can be used to carry data, since anything sent during the VBI would naturally not be displayed; various test signals, closed captioning, and other digital data can be sent during this time period. These include information like closed-caption data, Teletext (primarily in Europe), and now Intercast and the ATVEC Internet television encodings. . The Zapping VBI library, in short ZVBI, provides functions to capture and decode VBI data. It is written in plain ANSI C with few dependencies on other tools and libraries, licensed under GPL. Some features: * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced VBI data from Linux DVB devices; * Implements a VBI Proxy to share one VBI device between multiple applications; * Has a robust and versatile bit slicer which handles a wide range of data services; * Functions to capture multiple data services at once, such as Closed Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS; * Level 3.5 Teletext decoder with support for all Teletext character sets, graphics, 4096 colors, with built-in page cache including search functions; * Closed Caption decoder which supports roll-up, pop-up and paint-on style caption, color, expanded character set, text attributes and free text placement; * Renders Teletext and Caption pages, can export to HTML, PNG and other formats. * Can determine network names; * Can find Teletext subtitle and program pages; * Functions to extract data transmissions in Teletext streams (currently Page Format Clear and Independent Data Line Format A); * Can multiplex and demultiplex DVB VBI PES and TS streams. Homepage: http://zapping.sf.net/ZVBI Package: lightdm Status: install ok installed Priority: optional Section: x11 Installed-Size: 817 Maintainer: Debian Xfce Maintainers Architecture: arm64 Version: 1.26.0-4 Provides: x-display-manager Depends: adduser, dbus, logind | consolekit, lightdm-gtk-greeter | lightdm-greeter, lsb-base (>= 3.0-6), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libgcrypt20 (>= 1.7.0), libglib2.0-0 (>= 2.39.4), libpam0g (>= 0.99.7.1), libxcb1, libxdmcp6 Recommends: xserver-xorg Suggests: accountsservice, upower, xserver-xephyr Conffiles: /etc/apparmor.d/abstractions/lightdm 31917edc09272bd6ef57db38dd7c2508 /etc/apparmor.d/abstractions/lightdm_chromium-browser 507a40f04709efcc78af06c741b74f14 /etc/apparmor.d/lightdm-guest-session 0caa2901dfb342efe7e69157928e2823 /etc/dbus-1/system.d/org.freedesktop.DisplayManager.conf b76b6b45d7f7ff533c51d7fc02be32f4 /etc/init.d/lightdm 4dcfd046c11c7bb1ff62da56dd4ffd5b /etc/lightdm/keys.conf 562fbb4f40fab79b05d203be2aabf410 /etc/lightdm/lightdm.conf c23a82124d148a47550904d8b3cb0edc /etc/lightdm/users.conf 495d2acda42d29736cf320534e1ba830 /etc/pam.d/lightdm 5bff75f65824e102a4bbcc2538d4998d /etc/pam.d/lightdm-autologin 0240aabf77f7af7ad6693862ca5468be /etc/pam.d/lightdm-greeter 6fe1c602e67dd17dd1971937c7d9b848 Description: simple display manager An X display manager that: * Has a lightweight codebase * Is standards compliant (PAM, ConsoleKit, etc) * Has a well defined interface between the server and user interface * Fully themeable * Cross-desktop (greeters can be written in any toolkit) . Additional software can be useful along with LightDM: * xserver-xephyr can be used to add a nested X display by calling 'dm-tool add-nested-seat` * upower can be used to suspend the computer from the display manager * accountsservice is used to populate a user list with addition information. Homepage: https://launchpad.net/lightdm Package: lightdm-gtk-greeter Status: install ok installed Priority: optional Section: x11 Installed-Size: 564 Maintainer: Debian Xfce Maintainers Architecture: arm64 Version: 2.0.6-1 Provides: lightdm-greeter Depends: libc6 (>= 2.17), libcairo2 (>= 1.10.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.9.10), libindicator3-7, liblightdm-gobject-1-0 (>= 1.8.7), libx11-6 Recommends: desktop-base, adwaita-icon-theme, gnome-themes-extra, policykit-1 Conffiles: /etc/lightdm/lightdm-gtk-greeter.conf f697ccc6959a7a5b0e8f310b3917a8f8 Description: simple display manager (GTK+ greeter) lightdm-gtk-greeter is greeter shell for the LightDM login manager. It uses the GTK+ toolkit and integrates well with desktop environment using that toolkit, like the Xfce desktop environment. Homepage: https://launchpad.net/lightdm-gtk-greeter Package: lightdm-gtk-greeter-settings Status: install ok installed Priority: optional Section: x11 Installed-Size: 794 Maintainer: James Lu Architecture: all Version: 1.2.2-2 Depends: python3:any (>= 3.3.2-2~), python3-gi (>= 3.0), gir1.2-gtk-3.0, gir1.2-glib-2.0, gir1.2-gdkpixbuf-2.0, lightdm-gtk-greeter, gir1.2-pango-1.0 Recommends: policykit-1 Description: settings editor for the LightDM GTK+ Greeter A simple configuration utility for the LightDM GTK+ Greeter. All configuration options available in the greeter are exposed and easily manipulated using this tool. Homepage: https://launchpad.net/lightdm-gtk-greeter-settings Package: linux-base Status: install ok installed Priority: optional Section: kernel Installed-Size: 82 Maintainer: Debian Kernel Team Architecture: all Multi-Arch: foreign Version: 4.6 Replaces: kernel-common (<= 13.018+nmu1) Depends: debconf (>= 0.5) | debconf-2.0 Breaks: kernel-common (<= 13.018+nmu1) Description: Linux image base package This package contains files and support scripts for all Linux images. Package: locales Status: install ok installed Priority: standard Section: localization Installed-Size: 16108 Maintainer: GNU Libc Maintainers Architecture: all Source: glibc Version: 2.28-10+deb10u4 Replaces: manpages-fr-extra (<< 20141022) Depends: libc-bin (>> 2.28), libc-l10n (>> 2.28), debconf (>= 0.5) | debconf-2.0 Conffiles: /etc/locale.alias d7a66c8ca60c85abc6f2db2b43209105 Description: GNU C Library: National Language (locale) data [support] Machine-readable data files, shared objects and programs used by the C library for localization (l10n) and internationalization (i18n) support. . This package contains tools to generate locale definitions from source files (included in this package). It allows you to customize which definitions actually get generated. This is a space-saver over how this package used to be, with all locales generated by default. This created a package that unpacked to an excess of 30 megs. Homepage: https://www.gnu.org/software/libc/libc.html Package: login Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 2671 Maintainer: Shadow package maintainers Architecture: arm64 Source: shadow Version: 1:4.5-1.1 Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1) Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1) Breaks: util-linux (<< 2.32-0.2~) Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1) Conffiles: /etc/login.defs c92ea31d5ac50ae3e5d33d24f1e70983 /etc/pam.d/login 1fd6cb4d4267a68148ee9973510a9d3e /etc/securetty d0124b1d2fb22d4ac9a91aa02ae6d6db Description: system login tools These tools are required to be able to login and use your system. The login program invokes your user shell and enables command execution. The newgrp program is used to change your effective group ID (useful for workgroup type situations). The su program allows changing your effective user ID (useful being able to execute commands as another user). Homepage: https://github.com/shadow-maint/shadow Package: logrotate Status: install ok installed Priority: important Section: admin Installed-Size: 138 Maintainer: Christian Göttsche Architecture: arm64 Multi-Arch: foreign Version: 3.14.0-4 Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.27), libpopt0 (>= 1.14), libselinux1 (>= 1.32), cron | anacron | cron-daemon | systemd-sysv Recommends: bsd-mailx | mailx Breaks: postgresql-common (<= 126) Conffiles: /etc/cron.daily/logrotate 31da718265eaaa2fdabcfb2743bda171 /etc/logrotate.conf f9e5a2cb8c18105d232cdaf0521fed9e /etc/logrotate.d/btmp 55631862595faf6432786dc335eb3f44 /etc/logrotate.d/wtmp 46cd7ecb1810441bd450987a976f5540 Description: Log rotation utility The logrotate utility is designed to simplify the administration of log files on a system which generates a lot of log files. Logrotate allows for the automatic rotation compression, removal and mailing of log files. Logrotate can be set to handle a log file daily, weekly, monthly or when the log file gets to a certain size. Normally, logrotate runs as a daily cron job. Homepage: https://github.com/logrotate/logrotate Package: lsb-base Status: install ok installed Priority: optional Section: misc Installed-Size: 49 Maintainer: Debian LSB Team Architecture: all Multi-Arch: foreign Source: lsb Version: 10.2019051400 Description: Linux Standard Base init script functionality The Linux Standard Base (http://www.linuxbase.org/) is a standard core system that third-party applications written for Linux can depend upon. . This package only includes the init-functions shell library, which may be used by other packages' initialization scripts for console logging and other purposes. Homepage: https://wiki.linuxfoundation.org/lsb/start Package: lsb-release Status: install ok installed Priority: optional Section: misc Installed-Size: 62 Maintainer: Debian LSB Team Architecture: all Multi-Arch: foreign Source: lsb Version: 10.2019051400 Depends: python3:any, distro-info-data Recommends: apt Suggests: lsb Description: Linux Standard Base version reporting utility The Linux Standard Base (http://www.linuxbase.org/) is a standard core system that third-party applications written for Linux can depend upon. . The lsb-release command is a simple tool to help identify the Linux distribution being used and its compliance with the Linux Standard Base. LSB conformance will not be reported unless the required metapackages are installed. . While it is intended for use by LSB packages, this command may also be useful for programmatically distinguishing between a pure Debian installation and derived distributions. Homepage: https://wiki.linuxfoundation.org/lsb/start Package: lsof Status: install ok installed Priority: standard Section: utils Installed-Size: 478 Maintainer: Andres Salomon Architecture: arm64 Version: 4.91+dfsg-1 Depends: libc6 (>= 2.17), libselinux1 (>= 1.32) Suggests: perl Description: utility to list open files Lsof is a Unix-specific diagnostic tool. Its name stands for LiSt Open Files, and it does just that. It lists information about any files that are open, by processes currently running on the system. Homepage: http://people.freebsd.org/~abe/ Package: lxappearance Status: install ok installed Priority: optional Section: x11 Installed-Size: 544 Maintainer: Debian LXDE Maintainers Architecture: arm64 Version: 0.6.3-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.78), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.39.4), libgtk2.0-0 (>= 2.14.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libx11-6 Recommends: gtk2-engines, lxde-settings-daemon Description: LXDE GTK+ theme switcher LXAppearance is a GUI application for the Lightweight X11 Desktop Environment (LXDE). . It is a new feature-rich GTK+ theme switcher able to change GTK+ themes, icon themes, and fonts used by applications. GNOME/KDE/Xfce user may use build-in theme, this works for GTK+ based lightweight desktop Environment. . Features: . * Choose GTK+ theme * Choose icon theme * Install new icon theme * Choose their favorite font * Choose toolbar style * See changes immediately in preview area Homepage: http://www.lxde.org/ Package: lxappearance-obconf Status: install ok installed Priority: optional Section: x11 Installed-Size: 388 Maintainer: Debian LXDE Maintainers Architecture: arm64 Version: 0.2.3-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.35.9), libgtk2.0-0 (>= 2.12.0), libice6 (>= 1:1.0.0), libimlib2 (>= 1.4.5), libobrender32v5 (>= 3.6.0), libobt2v5 (>= 3.6.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libpangoxft-1.0-0 (>= 1.14.0), librsvg2-2 (>= 2.14.4), libsm6, libx11-6, libxft2 (>> 2.1.1), libxml2 (>= 2.7.4) Enhances: lxappearance Description: LXDE GTK+ theme switcher (plugin) LXAppearance is a GUI application for the Lightweight X11 Desktop Environment (LXDE). . This package contains the ObConf plugin. Homepage: http://www.lxde.org/ Package: lxde-common Status: install ok installed Priority: optional Section: x11 Installed-Size: 913 Maintainer: Debian LXDE Maintainers Architecture: all Version: 0.99.2-3 Recommends: lxde-session, lxde-core, pcmanfm, lxpanel, lxtask, gnome-screenshot, lxrandr, lxsession-logout, lxlock Suggests: lxlauncher Conffiles: /etc/xdg/lxpanel/LXDE/config 1f6e1ffcfa13266243c3e7ccce580880 /etc/xdg/lxpanel/LXDE/panels/panel 0708c4201b646ad874e57e3f2ab620c8 /etc/xdg/pcmanfm/LXDE/pcmanfm.conf 77d020dbb4339e56804377d24e970f67 Description: LXDE common configuration files LXDE (the Lightweight X11 Desktop Environment) is a project aimed to provide a desktop environment which is lightweight and fast. . This package provides convenient set of configuration files for core LXDE components (pcmanfm and lxpanel). Install all the recommended packages as well to run a minimal LXDE session. Homepage: http://www.lxde.org/ Package: lxde-core Status: install ok installed Priority: optional Section: metapackages Installed-Size: 11 Maintainer: Debian LXDE Maintainers Architecture: all Source: lxde-metapackages Version: 10 Depends: lxpanel, pcmanfm, lxde-session Recommends: policykit-1, lxterminal | x-terminal-emulator, notification-daemon, xscreensaver Suggests: firefox-esr | firefox | www-browser, lxde, lxlauncher Description: metapackage for the LXDE core The Lightweight X11 Desktop Environment (LXDE) is a project aimed to provide a desktop environment which is lightweight and fast. . This package is a metapackage which depends on minimal LXDE components set required to get a working desktop - pcmanfm, lxpanel, and lxde-session. This package also recommends few the most useful applications such as terminal emulator, notification-daemon, and xscreensaver. . If you just want to pick and choose the core components then feel free to remove this package. Homepage: http://www.lxde.org/ Package: lxde-icon-theme Status: install ok installed Priority: optional Section: x11 Installed-Size: 10442 Maintainer: Debian LXDE Maintainers Architecture: all Version: 0.5.1-2 Description: LXDE standard icon theme LXDE-Icon-Theme is the standard icon theme for the Lightweight X11 Desktop Environment (LXDE). . It is also known as the nuoveXT2 icon theme from which it is derived from. Homepage: http://www.lxde.org/ Package: lxhotkey-core Status: install ok installed Priority: optional Section: x11 Installed-Size: 32 Maintainer: Debian LXDE Maintainers Architecture: arm64 Source: lxhotkey (0.1.0-1) Version: 0.1.0-1+b1 Depends: libc6 (>= 2.17), libfm4 (>= 1.2.0), libglib2.0-0 (>= 2.28.0), libunistring2 (>= 0.9.7), libx11-6 Recommends: lxhotkey-gui, lxhotkey-plugin-openbox Description: Lightweight global keyboard shortcuts configurator LXHotkey is an universal application for the Lightweight X11 Desktop Environment (LXDE) which allows view and change global keyboard shortcuts for Window Manager actions, including ones to start applications. . This package contains no plugins so the most probably will do nothing useful unless you also install a plugin supporting the Window Manager you are using and probably some GUI plugin. Homepage: http://www.lxde.org/ Package: lxhotkey-gtk Status: install ok installed Priority: optional Section: x11 Installed-Size: 62 Maintainer: Debian LXDE Maintainers Architecture: arm64 Source: lxhotkey (0.1.0-1) Version: 0.1.0-1+b1 Provides: lxhotkey-gui Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfm4 (>= 0.1.12), libfontconfig1 (>= 2.12), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.33.14), libgtk2.0-0 (>= 2.18.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libunistring2 (>= 0.9.7), libx11-6, lxhotkey-core Recommends: lxhotkey-data Description: LXHotkey keyboard shortcuts configurator (GTK+ GUI plugin) LXHotkey is an universal application for the Lightweight X11 Desktop Environment (LXDE) which allows view and change global keyboard shortcuts for Window Manager actions, including ones to start applications. . This package contains a GTK+ 2.0 GUI plugin. Homepage: http://www.lxde.org/ Package: lxinput Status: install ok installed Priority: optional Section: x11 Installed-Size: 400 Maintainer: Debian LXDE Maintainers Architecture: arm64 Version: 0.3.5-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.16.0), libgtk2.0-0 (>= 2.18.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libx11-6 Suggests: lxsession Description: LXDE keyboard and mouse configuration LXInput is a GUI application for the Lightweight X11 Desktop Environment (LXDE). . It configures keyboard and mouse settings: . * Delay and Interval for character repeat * Enable/Disable beeps of keyboard input error * Swap left and right mouse buttons * Mouse acceleration and sensitivity Homepage: http://www.lxde.org/ Package: lxlauncher Status: install ok installed Priority: optional Section: x11 Installed-Size: 341 Maintainer: Debian LXDE Maintainers Architecture: arm64 Version: 0.2.5-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.24.0), libmenu-cache3 (>= 0.4.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libstartup-notification0 (>= 0.4), libx11-6, lxmenu-data Recommends: gnome-icon-theme Conffiles: /etc/xdg/lxlauncher/gtk.css 0e4db550763a5b4326013e470bf1b169 /etc/xdg/lxlauncher/gtkrc 7bfed5635072c1dd96025d41c7896ad8 /etc/xdg/lxlauncher/settings.conf 96a7c15245463d21df975d8c65453f9e /etc/xdg/menus/lxlauncher-applications.menu 4b1783a5955dc5bf254026e2af153e40 Description: LXDE launcher for netbooks LXLauncher is a GUI application for the Lightweight X11 Desktop Environment (LXDE). . It is a Easy-Mode launcher for netbooks and subnotebooks like the EeePC. It's standard-compliant and desktop-independent. It follows freedesktop.org specs, so newly added applications will automatically show up in the launcher, and vice versa for the removed ones. Homepage: http://www.lxde.org/ Package: lxmenu-data Status: install ok installed Priority: optional Section: x11 Installed-Size: 188 Maintainer: Debian LXDE Maintainers Architecture: all Multi-Arch: foreign Version: 0.1.5-2 Conffiles: /etc/xdg/menus/lxde-applications.menu 057e72bcb734593854ff07d04b1dc7ee Description: LXDE freedesktop.org menu specification LXMenu-data is a component for the Lightweight X11 Desktop Environment (LXDE). . It contains files required to build desktop menus for LXDE complying to the freedesktop.org menu specification. Homepage: http://www.lxde.org/ Package: lxpanel Status: install ok installed Priority: optional Section: x11 Installed-Size: 757 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: allowed Version: 0.10.0-2 Depends: libasound2 (>= 1.0.16), libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libcurl3-gnutls (>= 7.16.2), libfm-gtk4 (>= 1.2.0), libfm4 (>= 1.2.0), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.41.1), libgtk2.0-0 (>= 2.24.32), libiw30 (>= 30~pre1), libkeybinder0 (>= 0.3.0), libmenu-cache3 (>= 0.5.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libwnck22 (>= 2.30.7), libx11-6, libxml2 (>= 2.7.4), lxmenu-data, lxpanel-data (= 0.10.0-2), libfm-modules Recommends: xkb-data, lxterminal | x-terminal-emulator, pavucontrol | gnome-alsamixer, libnotify-bin, notification-daemon Suggests: menu, firefox-esr | firefox | www-browser Conffiles: /etc/xdg/lxpanel/default/config d41d8cd98f00b204e9800998ecf8427e /etc/xdg/lxpanel/default/panels/panel 9be0f5c9775a33f8975a3e04cbf4f67e /etc/xdg/lxpanel/two_panels/config d41d8cd98f00b204e9800998ecf8427e /etc/xdg/lxpanel/two_panels/panels/bottom 2fc85eba80c829b25b5eecc1452321aa /etc/xdg/lxpanel/two_panels/panels/top 69a49951df404d70ff2ae103620c9d45 Description: LXDE panel LXPanel is a GUI application for the Lightweight X11 Desktop Environment (LXDE). . It is derived from fbpanel and includes the following features: . * User-friendly application menu automatically generated from .desktop files on the system * Launcher bar (small icons clicked to launch apps) * Task bar supporting ICCCM/EWMH `urgency' hint (Pidgin IM windows can flash on new incoming messages) * Run dialog (type a command to run, without opening a terminal) * Net status icon plug-in (optional). * Volume control plug-in (optional). * Notification area (system tray). * Digital clock. * Keyboard LEDs plug-in (display caps/num locks). * lxpanelctl: control lxpanel from other programs. For example, "lxpanelctl run" will show the Run dialog in lxpanel, and "lxpanelctl menu" will show the application menu. This is useful in combination with window manager key bindings. Homepage: http://www.lxde.org/ Package: lxpanel-data Status: install ok installed Priority: optional Section: x11 Installed-Size: 2800 Maintainer: Debian LXDE Maintainers Architecture: all Multi-Arch: foreign Source: lxpanel Version: 0.10.0-2 Replaces: lxpanel (<< 0.7.0) Breaks: lxpanel (<< 0.7.0) Description: LXDE panel (data files) LXPanel is a GUI application for the Lightweight X11 Desktop Environment (LXDE). . This package contains the data required for panel. Homepage: http://www.lxde.org/ Package: lxpolkit Status: install ok installed Priority: optional Section: x11 Installed-Size: 51 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: allowed Source: lxsession Version: 0.5.4-1 Replaces: lxsession (<< 0.5.3-1) Provides: polkit-1-auth-agent Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk2.0-0 (>= 2.12.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libpolkit-agent-1-0 (>= 0.94), libpolkit-gobject-1-0 (>= 0.94), libunique-1.0-0 (>= 1.0.0), libx11-6, lxsession-data, policykit-1 Breaks: lxsession (<< 0.5.3-1) Conffiles: /etc/xdg/autostart/lxpolkit.desktop 70b1ad21c3f9fb2efd94b5b043200902 Description: LXDE PolicyKit authentication agent LXPolkit is a GUI application for the Lightweight X11 Desktop Environment (LXDE). . It's a simple PolicyKit authentication agent. Homepage: http://www.lxde.org/ Package: lxrandr Status: install ok installed Priority: optional Section: x11 Installed-Size: 396 Maintainer: Debian LXDE Maintainers Architecture: arm64 Version: 0.3.2-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.16.0), libgtk2.0-0 (>= 2.24.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), x11-xserver-utils Description: LXDE monitor configuration tool LXRandR is a GUI application for the Lightweight X11 Desktop Environment (LXDE). . This is a very basic monitor config tool utilizing the X extension called RandR. It can let you change the screen resolution on the fly. Besides, when you run lxrandr with external monitor connected, its GUI will change, and show you some quick options to get your projector or external monitor working correctly. . This tool doesn't aim to be a full randr frontend. If you need the full power of RandR, get xrandr (console) or grandr (GUI) and read some tutorials. . LXRandR only gives you some easy and quick options which are intuitive. It's very suitable for laptop users who frequently uses projectors or external monitor and just want to get their work done without reading a lot of "geek-centered" manuals or command line tutorials. Homepage: http://www.lxde.org/ Package: lxsession Status: install ok installed Priority: optional Section: x11 Installed-Size: 385 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: allowed Version: 0.5.4-1 Replaces: lxsession-data (<< 0.5.3-1) Provides: lxde-settings-daemon, x-session-manager Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk2.0-0 (>= 2.24.32), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libunique-1.0-0 (>= 1.0.0), libx11-6, lsb-release, laptop-detect, lxpolkit | polkit-1-auth-agent, lxsession-data, lxsession-logout Recommends: lxde-session, lxsession-default-apps | lxsession-edit, openssh-client | ssh-client Suggests: gpicview, lxpanel, pcmanfm, consolekit | libpam-systemd Breaks: lxsession-data (<< 0.5.3-1) Description: LXDE default session manager LXSession is the default session manager for the Lightweight X11 Desktop Environment (LXDE). . It is derived from XSM, has fewer dependencies and more features. It is desktop-independent and can be used with any window manager. Homepage: http://www.lxde.org/ Package: lxsession-data Status: install ok installed Priority: optional Section: x11 Installed-Size: 734 Maintainer: Debian LXDE Maintainers Architecture: all Multi-Arch: foreign Source: lxsession Version: 0.5.4-1 Replaces: lxsession (<< 0.5.3-1) Breaks: lxsession (<< 0.5.3-1) Description: Common files for lxsession LXSession is the default session manager for the Lightweight X11 Desktop Environment (LXDE). . This package provides common files for lxsession and supplementary packages. Homepage: http://www.lxde.org/ Package: lxsession-default-apps Status: install ok installed Priority: optional Section: x11 Installed-Size: 463 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: allowed Source: lxsession Version: 0.5.4-1 Replaces: lxsession (<< 0.5.3-1) Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk2.0-0 (>= 2.24.32), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libx11-6, lxsession, lxsession-data Breaks: lxsession (<< 0.5.3-1) Description: utility to configure lxsession and its default applications LXSession is the default session manager for the Lightweight X11 Desktop Environment (LXDE). . LXSession-Default-Apps is an utility to configure lxsession and its default applications. Homepage: http://www.lxde.org/ Package: lxsession-edit Status: install ok installed Priority: optional Section: x11 Installed-Size: 63 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: allowed Source: lxsession Version: 0.5.4-1 Replaces: lxsession (<< 0.5.3-1) Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.12.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), lxsession-data Breaks: lxsession (<< 0.5.3-1) Description: configure what application start up automatically in LXDE LXSession-Edit is a simple session editor GUI for autostarting applications which follows autostart specs from FreeDesktop.Org. . This package can be used without lxsession package as well. Homepage: http://www.lxde.org/ Package: lxsession-logout Status: install ok installed Priority: optional Section: x11 Installed-Size: 49 Maintainer: Debian LXDE Maintainers Architecture: arm64 Multi-Arch: allowed Source: lxsession Version: 0.5.4-1 Replaces: lxsession (<< 0.5.3-1) Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.26.0), libgtk2.0-0 (>= 2.24.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libx11-6, lxsession-data, lxlock | xdg-utils, policykit-1 Recommends: lsb-release, consolekit | systemd Breaks: lxsession (<< 0.5.3-1) Description: utility to logout from a LXDE or an Openbox session LXSession is the default session manager for the Lightweight X11 Desktop Environment (LXDE). . LXSession-Logout is a simple utility for stopping or logging out from a LXDE or an Openbox session. Homepage: http://www.lxde.org/ Package: lxterminal Status: install ok installed Priority: optional Section: x11 Installed-Size: 572 Maintainer: Debian LXDE Maintainers Architecture: arm64 Version: 0.3.2-1 Provides: x-terminal-emulator Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.28.0), libgnutls30 (>= 3.5.0), libgtk-3-0 (>= 3.3.16), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpcre2-8-0 (>= 10.31), libvte-2.91-0, zlib1g (>= 1:1.1.4) Description: LXDE terminal emulator LXTerminal is a VTE-based terminal emulator for the Lightweight X11 Desktop Environment (LXDE). . It supports multiple tabs and has only minimal dependencies thus being completely desktop-independent. In order to reduce memory usage and increase the performance, all instances of the terminal are sharing a single process. Homepage: http://www.lxde.org/ Package: makedev Status: install ok installed Priority: optional Section: admin Installed-Size: 97 Maintainer: Debian QA Group Architecture: all Multi-Arch: foreign Version: 2.3.1-94 Depends: base-passwd (>= 3.0.4) Conflicts: udev (<= 0.024-7) Description: creates device files in /dev The MAKEDEV executable is used to create device files, often in /dev. . Device files are special files through which applications can interact with hardware. . This package is not necessary for most modern Linux systems, where the udev subsystem provides a more dynamic mechanism for device file management. Package: mariadb-common Status: deinstall ok config-files Priority: optional Section: database Installed-Size: 76 Maintainer: Debian MySQL Maintainers Architecture: all Multi-Arch: foreign Source: mariadb-10.3 Version: 1:10.3.39-0+deb10u2 Config-Version: 1:10.3.39-0+deb10u2 Depends: mysql-common (>= 5.6.25) Conffiles: /etc/mysql/mariadb.cnf 46a0151b3b022b225cabb97e6d1ad947 Description: MariaDB common metapackage MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. Homepage: https://mariadb.org/ Package: mawk Status: install ok installed Priority: required Section: interpreters Installed-Size: 178 Maintainer: Steve Langasek Architecture: arm64 Multi-Arch: foreign Source: mawk (1.3.3-17) Version: 1.3.3-17+b3 Provides: awk Pre-Depends: libc6 (>= 2.17) Description: a pattern scanning and text processing language Mawk is an interpreter for the AWK Programming Language. The AWK language is useful for manipulation of data files, text retrieval and processing, and for prototyping and experimenting with algorithms. Mawk is a new awk meaning it implements the AWK language as defined in Aho, Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms to the POSIX 1003.2 (draft 11.3) definition of the AWK language which contains a few features not described in the AWK book, and mawk provides a small number of extensions. . Mawk is smaller and much faster than gawk. It has some compile-time limits such as NF = 32767 and sprintf buffer = 1020. Package: mesa-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 133 Maintainer: Debian X Strike Force Architecture: arm64 Source: mesa-demos (8.4.0-1) Version: 8.4.0-1+b1 Depends: libc6 (>= 2.17), libgl1, libglew2.1 (>= 1.12.0), libglu1-mesa | libglu1, libx11-6, libxext6 Description: Miscellaneous Mesa GL utilities This package provides several basic GL utilities built by Mesa, including glxinfo and glxgears. Homepage: https://mesa3d.org/ Package: mime-support Status: install ok installed Priority: standard Section: net Installed-Size: 110 Maintainer: Mime-Support Packagers Architecture: all Multi-Arch: foreign Version: 3.62 Recommends: bzip2, file, xz-utils Conffiles: /etc/mime.types 0d516753aee0a2c670c79667aad0c836 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e Description: MIME files 'mime.types' & 'mailcap', and support programs As these files can be used by all MIME compliant programs, they have been moved into their own package that others can depend upon. . Other packages add themselves as viewers/editors/composers/etc by using the provided "update-mime" program. . In addition, the commands "see", "edit", "compose", and "print" will display, alter, create, and print (respectively) any file using a program determined from the entries in the mime.types and mailcap files. Package: minicom Status: install ok installed Priority: optional Section: comm Installed-Size: 904 Maintainer: Martin A. Godisch Architecture: arm64 Source: minicom (2.7.1-1) Version: 2.7.1-1+b1 Depends: libc6 (>= 2.17), libtinfo6 (>= 6) Recommends: lrzsz Description: Friendly menu driven serial communication program Minicom is a clone of the MS-DOS "Telix" communication program. It emulates ANSI and VT102 terminals, has a dialing directory and auto zmodem download. Homepage: https://alioth.debian.org/projects/minicom/ Package: mount Status: install ok installed Priority: required Section: admin Installed-Size: 398 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: foreign Source: util-linux Version: 2.33.1-0.1+deb10u1 Replaces: bash-completion (<< 1:2.1-4.3~) Depends: util-linux (>= 2.29.2-3~) Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.33), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.33) Suggests: nfs-common (>= 1:1.1.0-13) Breaks: bash-completion (<< 1:2.1-4.3~) Description: tools for mounting and manipulating filesystems This package provides the mount(8), umount(8), swapon(8), swapoff(8), and losetup(8) commands. Important: yes Package: msmtp Status: install ok installed Priority: optional Section: mail Installed-Size: 426 Maintainer: Emmanuel Bouthenot Architecture: arm64 Version: 1.8.3-1 Depends: libc6 (>= 2.22), libgnutls30 (>= 3.6.6), libgsasl7 (>= 1.1), debconf (>= 0.5) | debconf-2.0, adduser, ucf Recommends: ca-certificates Suggests: msmtp-mta Conffiles: /etc/apparmor.d/usr.bin.msmtp 0d1336ec796220158ab8cc2021618f94 Description: light SMTP client with support for server profiles msmtp is an SMTP client that can be used to send mails from Mutt and probably other MUAs (mail user agents). It forwards mails to an SMTP server (for example at a free mail provider), which takes care of the final delivery. Using profiles, it can be easily configured to use different SMTP servers with different configurations, which makes it ideal for mobile clients. . This package is compiled with SASL and TLS/SSL support. Homepage: https://marlam.de/msmtp/ Package: mysql-common Status: deinstall ok config-files Priority: optional Section: database Installed-Size: 34 Maintainer: Debian MySQL Maintainers Architecture: all Multi-Arch: foreign Source: mysql-defaults (1.0.5) Version: 5.8+1.0.5 Config-Version: 5.8+1.0.5 Replaces: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5 Provides: mysql-common-5.6 Breaks: mariadb-common (<< 10.0.20-3~) Conflicts: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5 Conffiles: /etc/mysql/conf.d/mysql.cnf 61e0993270966cc6bc96b46c01ade21f /etc/mysql/conf.d/mysqldump.cnf 20890decb4486ce539753193908fb356 /etc/mysql/my.cnf.fallback cfe2bc1819d5e200eca8ca6912f714af Description: MySQL database common files, e.g. /etc/mysql/my.cnf MySQL is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MySQL are speed, robustness and ease of use. . This package includes files needed by all versions of the client library, e.g. /etc/mysql/my.cnf. Package: nautilus Status: deinstall ok config-files Priority: optional Section: gnome Installed-Size: 1898 Maintainer: Debian GNOME Maintainers Architecture: arm64 Version: 3.30.5-2 Config-Version: 3.30.5-2 Depends: bubblewrap, desktop-file-utils (>= 0.7), gsettings-desktop-schemas (>= 3.8.0), gvfs (>= 1.3.2), libglib2.0-data, libnautilus-extension1a (= 3.30.5-2), nautilus-data (= 3.30.5-2), shared-mime-info (>= 0.50), tracker, libatk1.0-0 (>= 1.32.0), libc6 (>= 2.28), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.14.0), libgdk-pixbuf2.0-0 (>= 2.25.2), libgexiv2-2 (>= 0.10.0), libglib2.0-0 (>= 2.49.5), libgnome-autoar-0-0 (>= 0.2.1), libgtk-3-0 (>= 3.22.27), libpango-1.0-0 (>= 1.20.0), libpangocairo-1.0-0 (>= 1.14.0), libseccomp2 (>= 1.0.1), libselinux1 (>= 2.0), libtracker-sparql-2.0-0 (>= 1.12.0) Recommends: gnome-sushi, gvfs-backends, librsvg2-common Suggests: eog, evince | pdf-viewer, nautilus-extension-brasero, nautilus-sendto, totem | mp3-decoder, xdg-user-dirs Description: file manager and graphical shell for GNOME Nautilus is the official file manager for the GNOME desktop. It allows one to browse directories, preview files and launch applications associated with them. It is also responsible for handling the icons on the GNOME desktop. It works on local and remote filesystems. . Several icon themes and components for viewing different kinds of files are available in separate packages. Homepage: https://wiki.gnome.org/action/show/Apps/Nautilus Package: ncurses-base Essential: yes Status: install ok installed Priority: required Section: misc Installed-Size: 369 Maintainer: Craig Small Architecture: all Multi-Arch: foreign Source: ncurses Version: 6.1+20181013-2+deb10u5 Provides: ncurses-runtime Breaks: bash-static (<< 4.4.18-1.1), libmono-corlib4.5-cil (<< 4.6.2.7+dfsg-2), libslang2 (<< 2.3.1a-3), libtinfo5 (<< 6.1), libunibilium0 (<< 2), libunibilium4 (<< 2.0.0-3), zsh-static (<< 5.4.2-4) Conffiles: /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171 Description: basic terminal type definitions The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains terminfo data files to support the most common types of terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220, vt52, and xterm. Homepage: https://invisible-island.net/ncurses/ Package: ncurses-bin Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 576 Maintainer: Craig Small Architecture: arm64 Multi-Arch: foreign Source: ncurses Version: 6.1+20181013-2+deb10u5 Pre-Depends: libc6 (>= 2.17), libtinfo6 (>= 6.1) Description: terminal-related programs and man pages The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the programs used for manipulating the terminfo database and individual terminfo entries, as well as some programs for resetting terminals and such. Homepage: https://invisible-island.net/ncurses/ Package: net-tools Status: install ok installed Priority: important Section: net Installed-Size: 951 Maintainer: net-tools Team Architecture: arm64 Multi-Arch: foreign Version: 1.60+git20180626.aebd88e-1 Depends: libc6 (>= 2.17), libselinux1 (>= 1.32) Description: NET-3 networking toolkit This package includes the important tools for controlling the network subsystem of the Linux kernel. This includes arp, ifconfig, netstat, rarp, nameif and route. Additionally, this package contains utilities relating to particular network hardware types (plipconfig, slattach, mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr). . In the upstream package 'hostname' and friends are included. Those are not installed by this package, since there is a special "hostname*.deb". Homepage: http://sourceforge.net/projects/net-tools/ Package: netbase Status: install ok installed Priority: important Section: admin Installed-Size: 44 Maintainer: Marco d'Itri Architecture: all Multi-Arch: foreign Version: 5.6 Conffiles: /etc/protocols bb9c019d6524e913fd72441d58b68216 /etc/rpc f0b6f6352bf886623adc04183120f83b /etc/services c2f245a9bee4ea2e830fbf1f2100617e Description: Basic TCP/IP networking system This package provides the necessary infrastructure for basic TCP/IP based networking. . In particular, it supplies tables of common name-to-number mappings in /etc/services, /etc/rpc, and /etc/protocols. Package: netcat Status: install ok installed Priority: extra Section: oldlibs Installed-Size: 16 Maintainer: Ruben Molina Architecture: all Version: 1.10-41.1 Depends: netcat-traditional (>= 1.10-39) Description: TCP/IP swiss army knife -- transitional package This is a "dummy" package that depends on lenny's default version of netcat, to ease upgrades. It may be safely removed. Package: netcat-traditional Status: install ok installed Priority: important Section: net Installed-Size: 136 Maintainer: Ruben Molina Architecture: arm64 Source: netcat Version: 1.10-41.1 Provides: netcat Depends: libc6 (>= 2.17) Description: TCP/IP swiss army knife A simple Unix utility which reads and writes data across network connections using TCP or UDP protocol. It is designed to be a reliable "back-end" tool that can be used directly or easily driven by other programs and scripts. At the same time it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities. . This is the "classic" netcat, written by *Hobbit*. It lacks many features found in netcat-openbsd. Package: network-manager Status: install ok installed Priority: optional Section: net Installed-Size: 11536 Maintainer: Utopia Maintenance Team Architecture: arm64 Version: 1.14.6-2+deb10u1 Depends: libaudit1 (>= 1:2.2.1), libbluetooth3 (>= 4.91), libc6 (>= 2.26), libcurl3-gnutls (>= 7.16.3), libglib2.0-0 (>= 2.43.2), libgnutls30 (>= 3.6.5), libjansson4 (>= 2.0.1), libmm-glib0 (>= 1.0.0), libndp0 (>= 1.2), libnewt0.52 (>= 0.52.20), libnm0 (= 1.14.6-2+deb10u1), libpolkit-agent-1-0 (>= 0.99), libpolkit-gobject-1-0 (>= 0.104), libpsl5 (>= 0.13.0), libreadline7 (>= 6.0), libselinux1 (>= 1.32), libsystemd0 (>= 221), libteamdctl0 (>= 1.9), libudev1 (>= 183), libuuid1 (>= 2.16), lsb-base, wpasupplicant, dbus, udev, adduser, libpam-systemd, policykit-1 Pre-Depends: init-system-helpers (>= 1.54~) Recommends: ppp, dnsmasq-base, iptables, modemmanager, crda, isc-dhcp-client Suggests: libteam-utils Breaks: ppp (>= 2.4.7-3~), ppp (<< 2.4.7-2+~) Conffiles: /etc/NetworkManager/NetworkManager.conf 914f22205f2ed4d4bc84f3682ecd3153 /etc/NetworkManager/dispatcher.d/01-ifupdown e6de81aa6aa1f472937fd99db343914f /etc/init.d/network-manager 84d429bf52701edbd6535020d8dcebd1 Description: network management framework (daemon and userspace tools) NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. . This package provides the userspace daemons and a command line interface to interact with NetworkManager. . Optional dependencies: * ppp: Required for establishing dial-up connections (e.g. via GSM). * dnsmasq-base/iptables: Required for creating Ad-hoc connections and connection sharing. address configuration. * libteam-utils: Network Team driver allows multiple network interfaces to be teamed together and act like a single one. This process is called "ethernet bonding", "channel teaming" or "link aggregation". Homepage: https://wiki.gnome.org/Projects/NetworkManager Package: network-manager-gnome Status: deinstall ok config-files Priority: optional Section: gnome Installed-Size: 5905 Maintainer: Utopia Maintenance Team Architecture: arm64 Source: network-manager-applet Version: 1.8.20-1.1 Config-Version: 1.8.20-1.1 Depends: libatk1.0-0 (>= 1.12.4), libayatana-appindicator3-1 (>= 0.4.90), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.43.2), libgtk-3-0 (>= 3.10), libjansson4 (>= 2.0.1), libmm-glib0 (>= 0.7.991), libnm0 (>= 1.11.3), libnma0 (= 1.8.20-1.1), libnotify4 (>= 0.7.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libsecret-1-0 (>= 0.7), libselinux1 (>= 2.1.9), dconf-gsettings-backend | gsettings-backend, network-manager (>= 1.8), policykit-1-gnome | polkit-1-auth-agent, default-dbus-session-bus | dbus-session-bus Recommends: notification-daemon, gnome-keyring, mobile-broadband-provider-info, iso-codes Suggests: network-manager-openconnect-gnome, network-manager-openvpn-gnome, network-manager-vpnc-gnome, network-manager-pptp-gnome Conffiles: /etc/xdg/autostart/nm-applet.desktop 0494bdb77c64064a4d2372e011d8bc1c Description: network management framework (GNOME frontend) NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. . This package contains a systray applet for GNOME's notification area but it also works for other desktop environments which provide a systray like KDE or Xfce. It displays the available networks and allows users to easily switch between them. For encrypted networks it will prompt the user for the key/passphrase and it can optionally store them in the gnome-keyring. Homepage: https://www.gnome.org/projects/NetworkManager/ Package: network-manager-l2tp Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 580 Maintainer: Douglas Kosovic Architecture: arm64 Version: 1.2.10-1 Config-Version: 1.2.10-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.41.1), libnm0 (>= 1.1.90), ppp (<< 2.4.7-3~), ppp (>= 2.4.7-2+~), network-manager (>= 1.2.0), xl2tpd, strongswan | libreswan Conffiles: /etc/dbus-1/system.d/nm-l2tp-service.conf c66436a52e0616e7f50995746ebe76ee Description: network management framework (L2TP plugin core) NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. . This package provides a VPN plugin for L2TP with optional IPsec support. Homepage: https://github.com/nm-l2tp/network-manager-l2tp Package: network-manager-openvpn Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 1189 Maintainer: Utopia Maintenance Team Architecture: arm64 Version: 1.8.10-1 Config-Version: 1.8.10-1 Replaces: network-manager-openvpn-gnome (<< 1.2.8-1) Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), libnm0 (>= 1.1.90), network-manager (>= 1.2.0), openvpn (>= 2.1~rc9), adduser Breaks: network-manager-openvpn-gnome (<< 1.2.8-1) Description: network management framework (OpenVPN plugin core) NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. . This package provides a VPN plugin for OpenVPN. Homepage: https://www.gnome.org/projects/NetworkManager/ Package: network-manager-pptp Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 709 Maintainer: Utopia Maintenance Team Architecture: arm64 Version: 1.2.8-2 Config-Version: 1.2.8-2 Replaces: network-manager-pptp-gnome (<< 1.2.4-2) Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.41.1), libnm0 (>= 1.1.90), ppp (<< 2.4.7-3~), ppp (>= 2.4.7-2+~), network-manager (>= 1.2.0), pptp-linux Breaks: network-manager-pptp-gnome (<< 1.2.4-2) Description: network management framework (PPTP plugin core) NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. . This package provides a VPN plugin for PPTP, commonly used for connecting to Microsoft VPN servers. Homepage: https://www.gnome.org/projects/NetworkManager/ Package: network-manager-vpnc Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 730 Maintainer: Utopia Maintenance Team Architecture: arm64 Version: 1.2.6-2 Config-Version: 1.2.6-2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.41.1), libnm0 (>= 1.1.90), network-manager (>= 1.2.0), vpnc Description: network management framework (VPNC plugin core) NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. . This package provides a VPN plugin for vpnc, providing easy access to Cisco Concentrator based VPN's. Homepage: https://www.gnome.org/projects/NetworkManager/ Package: notification-daemon Status: install ok installed Priority: optional Section: x11 Installed-Size: 389 Maintainer: Debian GNOME Maintainers Architecture: arm64 Version: 3.20.0-4 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.10.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.19.12), libpango-1.0-0 (>= 1.14.0), libx11-6 Description: daemon for displaying passive pop-up notifications notification-daemon displays passive pop-up notifications, as per the Desktop Notifications Specification. . The Desktop Notifications Specification provides a standard way of doing passive pop-up notifications on the Linux desktop. These are designed to notify the user of something without interrupting their work with a dialog box that they must close. Passive popups can automatically disappear after a short period of time. Homepage: https://wiki.gnome.org/Projects/NotificationDaemon Package: ntfs-3g Status: install ok installed Priority: optional Section: otherosfs Installed-Size: 1390 Maintainer: Laszlo Boszormenyi (GCS) Architecture: arm64 Version: 1:2017.3.23AR.3-3+deb10u3 Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libgnutls30 (>= 3.6.5), libgpg-error0 (>= 1.14), libntfs-3g883 (= 1:2017.3.23AR.3-3+deb10u3) Pre-Depends: fuse Description: read/write NTFS driver for FUSE NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS filesystem used by Microsoft Windows. Homepage: http://jp-andre.pagesperso-orange.fr/advanced-ntfs-3g.html Package: ntp Status: install ok installed Priority: optional Section: net Installed-Size: 2016 Maintainer: Debian NTP Team Architecture: arm64 Version: 1:4.2.8p12+dfsg-4 Replaces: apparmor-profiles-extra (<< 1.8) Depends: adduser, lsb-base (>= 3.2-13), netbase, tzdata, libc6 (>= 2.17), libcap2 (>= 1:2.10), libedit2 (>= 2.11-20080614-0), libopts25 (>= 1:5.18.12), libssl1.1 (>= 1.1.0) Recommends: sntp, perl:any Suggests: ntp-doc Breaks: apparmor-profiles-extra (<< 1.8) Conffiles: /etc/NetworkManager/dispatcher.d/ntp 9b47f8044e4690b4efa94e636ba6359e /etc/apparmor.d/tunables/ntpd 5519e4c01535818cb26f2ef9e527f191 /etc/apparmor.d/usr.sbin.ntpd a67f9ebc707a85859aa24e137bf868cc /etc/cron.daily/ntp 2edb88a0b9b935161db3841b8b7421ab /etc/default/ntp cd7a62fbb18fa8fe5893dee93064b328 /etc/dhcp/dhclient-exit-hooks.d/ntp a062fa223ec16a1dc79acb758ce0c0fb /etc/init.d/ntp 57d5d284cf93f722faa05fc0bed4fcb6 /etc/ntp.conf 4c8b0024bac256f7f7f5b2732b79b33a Description: Network Time Protocol daemon and utility programs NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . This package contains the NTP daemon and utility programs. An NTP daemon needs to be running on each host that is to have its clock accuracy controlled by NTP. The same NTP daemon is also used to provide NTP service to other hosts. . For more information about the NTP protocol and NTP server configuration and operation, install the package "ntp-doc". Homepage: http://support.ntp.org/ Package: ntpdate Status: install ok installed Priority: optional Section: net Installed-Size: 240 Maintainer: Debian NTP Team Architecture: arm64 Source: ntp Version: 1:4.2.8p12+dfsg-4 Depends: netbase, libc6 (>= 2.17), libssl1.1 (>= 1.1.0) Conffiles: /etc/default/ntpdate 71d857cae72ae1f53380ea4f2e38cb2e /etc/dhcp/dhclient-exit-hooks.d/ntpdate cb47fd9d3e21a204fb3ba4ca3fc8ab46 /etc/logcheck/ignore.d.server/ntpdate 68d4df7cceb0e97bde87126c3a56b219 Description: client for setting system time from NTP servers (deprecated) NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . ntpdate is deprecated. Please use sntp instead for manual or scripted NTP queries/syncs. Homepage: http://support.ntp.org/ Package: obconf Status: install ok installed Priority: optional Section: x11 Installed-Size: 886 Maintainer: Mateusz Łukasik Architecture: arm64 Version: 1:2.0.4+git20150213-2 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.35.9), libgtk-3-0 (>= 3.0.0), libice6 (>= 1:1.0.0), libimlib2 (>= 1.4.5), libobrender32v5 (>= 3.6.0), libobt2v5 (>= 3.6.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libpangoxft-1.0-0 (>= 1.14.0), librsvg2-2 (>= 2.14.4), libsm6, libstartup-notification0 (>= 0.2), libx11-6, libxft2 (>> 2.1.1), libxml2 (>= 2.7.4) Recommends: openbox Description: preferences manager for Openbox window manager ObConf is a small graphical utility which configures the window manager Openbox' preferences and configuration settings on the fly. . If you are an Openbox user, you may want this package. Homepage: https://github.com/danakj/obconf Package: odbcinst Status: deinstall ok config-files Priority: optional Section: utils Installed-Size: 76 Maintainer: Steve Langasek Architecture: arm64 Multi-Arch: foreign Source: unixodbc Version: 2.3.6-0.1 Config-Version: 2.3.6-0.1 Replaces: odbcinst1, odbcinst1debian1 (<< 2.2.11-20), unixodbc (<< 2.1.1-2) Depends: libc6 (>= 2.17), libltdl7 (>= 2.4.6), odbcinst1debian2 (>= 2.3.1) Conflicts: odbcinst1 Conffiles: /etc/odbc.ini d41d8cd98f00b204e9800998ecf8427e Description: Helper program for accessing odbc ini files UnixODBC is an implementation of the Open DataBase Connectivity standard, a database abstraction layer that allows applications to be used with many different relational databases by way of a single library. . This package contains the odbcinst helper tool, which allows ODBC driver packages to install their own driver settings. Homepage: http://www.unixodbc.org/ Package: onboard Status: install ok installed Priority: optional Section: gnome Installed-Size: 1885 Maintainer: Debian+Ubuntu MATE Packaging Team Architecture: arm64 Source: onboard (1.4.1-4) Version: 1.4.1-4+b1 Depends: gir1.2-gdkpixbuf-2.0, gir1.2-glib-2.0, gir1.2-gtk-3.0, gir1.2-pango-1.0 (>= 1.29.3), iso-codes, librsvg2-common, onboard-common (<< 1.4.1-4.1), onboard-common (>= 1.4.1-4), python3-cairo, python3-dbus, python3-gi-cairo, dconf-gsettings-backend | gsettings-backend, python3 (<< 3.8), python3 (>= 3.7~), python3:any, libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.10.0), libcanberra0 (>= 0.2), libdconf1 (>= 0.14.0), libgcc1 (>= 1:3.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgtk-3-0 (>= 3.9.10), libhunspell-1.7-0, libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libstdc++6 (>= 5.2), libudev1 (>= 183), libx11-6, libxi6 (>= 2:1.2.99.4), libxkbfile1, libxtst6 Recommends: gir1.2-ayatanaappindicator3-0.1, gir1.2-atspi-2.0, onboard-data (>= 1.4.1-4), xdg-utils Suggests: mousetweaks (>= 3.3.90) Conffiles: /etc/xdg/autostart/onboard-autostart.desktop d4654dfdbc1822196d95a4a21c52614e Description: Simple On-screen Keyboard On-screen Keyboard with macros, easy layout creation and word suggestion. . This on-screen keyboard can be useful for tablet PC users, as well as for mobility impaired users. Homepage: https://launchpad.net/onboard Package: onboard-common Status: install ok installed Priority: optional Section: gnome Installed-Size: 3323 Maintainer: Debian+Ubuntu MATE Packaging Team Architecture: all Source: onboard Version: 1.4.1-4 Replaces: onboard (<< 1.3.0-1~) Depends: python3 Breaks: onboard (<< 1.3.0-1~) Description: Simple On-screen Keyboard (common files) On-screen Keyboard with macros, easy layout creation and word suggestion. . This package ships the architecture independent files of the onboard on-screen keyboard. Homepage: https://launchpad.net/onboard Package: openbox Status: hold ok installed Priority: optional Section: x11 Installed-Size: 1250 Maintainer: Mateusz Łukasik Architecture: arm64 Version: 3.6.1-8 Provides: x-session-manager, x-window-manager Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.35.9), libice6 (>= 1:1.0.0), libobrender32v5 (>= 3.6.0), libobt2v5 (>= 3.6.0), libsm6, libstartup-notification0 (>= 0.7), libx11-6, libxau6, libxcursor1 (>> 1.1.2), libxext6, libxi6 (>= 2:1.2.99.4), libxinerama1, libxrandr2 Recommends: obconf | obconf-qt, obsession, scrot Suggests: fonts-dejavu, libxml2-dev, tint2, python, openbox-gnome-session (= 3.6.1-8), openbox-kde-session (= 3.6.1-8) Breaks: openbox-theme-breeze (<< 1.0) Conffiles: /etc/menu-methods/openbox 454ed1e8309e6fc60b0d16894d541dfd /etc/xdg/openbox/autostart b1cd37c867ae86ece7347bc1d9e1a457 /etc/xdg/openbox/environment 34bbf463555dbfb8f97fe957489d73b7 /etc/xdg/openbox/menu.xml 4d166c70ea1daf9c1492d94c53069283 /etc/xdg/openbox/rc.xml 671aedf096ff76718f7df5f21aa993a2 Description: standards-compliant, fast, light-weight and extensible window manager Openbox works with your applications, and makes your desktop easier to manage. This is because the approach to its development was the opposite of what seems to be the general case for window managers. Openbox was written first to comply with standards and to work properly. Only when that was in place did the team turn to the visual interface. . Openbox is fully functional as a stand-alone working environment, or can be used as a drop-in replacement for the default window manager in the GNOME or KDE desktop environments. . Openbox 3 is a completely new breed of window manager. It is not based upon any existing code base, although the visual appearance has been based upon that of Blackbox. Openbox 2 was based on the Blackbox 0.65.0 codebase. . Some of the things to look for in Openbox are: . * ICCCM and EWMH compliance! * Very fast * Chainable key bindings * Customizable mouse actions * Window resistance * Multi-head Xinerama support! * Pipe menus Homepage: http://www.openbox.org Package: openbox-lxde-session Status: install ok installed Priority: optional Section: x11 Installed-Size: 71 Maintainer: Debian LXDE Maintainers Architecture: all Source: lxde-common Version: 0.99.2-3 Replaces: lxde-common (<< 0.99.2-1) Provides: lxde-session, x-session-manager Depends: lxde-common (>= 0.99.2-1), lxsession, openbox Breaks: lxde-common (<< 0.99.2-1) Conffiles: /etc/xdg/lxsession/LXDE/autostart 9958557aebbd124ef9a9d90fe65ad2b0 /etc/xdg/lxsession/LXDE/desktop.conf b6f11f62331389ecf6b1c7ea4c85a74a /etc/xdg/openbox/LXDE/menu.xml 7592ced9af732e30640223f162bb3487 /etc/xdg/openbox/LXDE/rc.xml 628d3f4120718b6387d62e25ac2fbfdf Description: LXDE session manager and configuration files LXDE (the Lightweight X11 Desktop Environment) is a project aimed to provide a desktop environment which is lightweight and fast. . It's not designed to be powerful and bloated, but to be usable and slim enough, and keep the resource usage low. Different from other desktop environments, LXDE doesn't tightly integrate every component. Instead, LXDE tries to make all components independent, and each of them can be used independently with fewer dependencies. . Features: . * Lightweight, runs with reasonable memory usage * Fast, runs well even on older machines produced in 1999 * Good-looking, GTK+ 2 internationalized user interface * Easy-to-use, the user interface is simple, but usable enough * Desktop independent (surprise! Every component can be used without LXDE) * Standard compliant, follows the specs on freedesktop.org . This package depends on minimal set of components (lxsession, openbox, and lxde-screenlock.desktop file), and contains all the session-specific configuration files required to start a LXDE desktop session from a display manager such as GDM. Homepage: http://www.lxde.org/ Package: openssh-client Status: install ok installed Priority: standard Section: net Installed-Size: 3507 Maintainer: Debian OpenSSH Maintainers Architecture: arm64 Multi-Arch: foreign Source: openssh Version: 1:7.9p1-10+deb10u4 Replaces: ssh, ssh-krb5 Provides: rsh-client, ssh-client Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.26), libedit2 (>= 2.11-20080614-0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 1.32), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4) Recommends: xauth Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass Conflicts: sftp Conffiles: /etc/ssh/ssh_config f7bf238a3b0bf155c565454a9f819731 Description: secure shell (SSH) client, for secure access to remote machines This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It can be used to provide applications with a secure communication channel. . This package provides the ssh, scp and sftp clients, the ssh-agent and ssh-add programs to make public key authentication more convenient, and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities. . In some countries it may be illegal to use any encryption at all without a special permit. . ssh replaces the insecure rsh, rcp and rlogin programs, which are obsolete for most purposes. Homepage: http://www.openssh.com/ Package: openssh-server Status: install ok installed Priority: optional Section: net Installed-Size: 1441 Maintainer: Debian OpenSSH Maintainers Architecture: arm64 Multi-Arch: foreign Source: openssh Version: 1:7.9p1-10+deb10u4 Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5 Provides: ssh-server Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:7.9p1-10+deb10u4), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.26), libcom-err2 (>= 1.43.9), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.1 (>= 1.1.1), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4) Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth Suggests: molly-guard, monkeysphere, rssh, ssh-askpass, ufw Conflicts: sftp, ssh-socks, ssh2 Conffiles: /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035 /etc/init.d/ssh 0adcea4e477bba5422f1ced4ec15ce64 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812 /etc/ssh/moduli 3f02069ef69e6636b879ec3c0706a664 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e Description: secure shell (SSH) server, for secure access from remote machines This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It can be used to provide applications with a secure communication channel. . This package provides the sshd server. . In some countries it may be illegal to use any encryption at all without a special permit. . sshd replaces the insecure rshd program, which is obsolete for most purposes. Homepage: http://www.openssh.com/ Package: openssh-sftp-server Status: install ok installed Priority: optional Section: net Installed-Size: 122 Maintainer: Debian OpenSSH Maintainers Architecture: arm64 Source: openssh Version: 1:7.9p1-10+deb10u4 Replaces: openssh-server (<< 1:6.5p1-5) Depends: openssh-client (= 1:7.9p1-10+deb10u4), libc6 (>= 2.26) Recommends: openssh-server | ssh-server Breaks: openssh-server (<< 1:6.5p1-5) Enhances: openssh-server, ssh-server Description: secure shell (SSH) sftp server module, for SFTP access from remote machines This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It can be used to provide applications with a secure communication channel. . This package provides the SFTP server module for the SSH server. It is needed if you want to access your SSH server with SFTP. The SFTP server module also works with other SSH daemons like dropbear. . OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer protocol described in: . http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt . Newer versions of the draft will not be supported, though some features are individually implemented as extensions. Homepage: http://www.openssh.com/ Package: openssl Status: install ok installed Priority: optional Section: utils Installed-Size: 1442 Maintainer: Debian OpenSSL Team Architecture: arm64 Multi-Arch: foreign Version: 1.1.1n-0+deb10u6 Depends: libc6 (>= 2.17), libssl1.1 (>= 1.1.1) Suggests: ca-certificates Conffiles: /etc/ssl/openssl.cnf 8dd4de5642570c91e9071900b6b9d5bc Description: Secure Sockets Layer toolkit - cryptographic utility This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It contains the general-purpose command line binary /usr/bin/openssl, useful for cryptographic operations such as: * creating RSA, DH, and DSA key parameters; * creating X.509 certificates, CSRs, and CRLs; * calculating message digests; * encrypting and decrypting with ciphers; * testing SSL/TLS clients and servers; * handling S/MIME signed or encrypted mail. Homepage: https://www.openssl.org/ Package: openvpn Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 1132 Maintainer: Bernhard Schmidt Architecture: arm64 Version: 2.4.7-1+deb10u1 Config-Version: 2.4.7-1+deb10u1 Depends: debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.17), liblz4-1 (>= 0.0~r130), liblzo2-2, libpam0g (>= 0.99.7.1), libpkcs11-helper1 (>= 1.11), libssl1.1 (>= 1.1.1), libsystemd0, iproute2, lsb-base (>= 3.0-6) Recommends: easy-rsa Suggests: openssl, resolvconf, openvpn-systemd-resolved Conffiles: /etc/default/openvpn 3c4d9d1b3f89320396784cc21a142a22 /etc/init.d/openvpn cf1bc30e71de3b3e4a2f05dc8bf095e4 /etc/network/if-down.d/openvpn 33ce4a4608a2f2e129c1feb05daa2f97 /etc/network/if-up.d/openvpn 5c1e39845a263f512b81ee62c1f37b92 /etc/openvpn/update-resolv-conf b75b20ba3fd750b33e47dd81e2c427a8 Description: virtual private network daemon OpenVPN is an application to securely tunnel IP networks over a single UDP or TCP port. It can be used to access remote sites, make secure point-to-point connections, enhance wireless security, etc. . OpenVPN uses all of the encryption, authentication, and certification features provided by the OpenSSL library (any cipher, key size, or HMAC digest). . OpenVPN may use static, pre-shared keys or TLS-based dynamic key exchange. It also supports VPNs with dynamic endpoints (DHCP or dial-up clients), tunnels over NAT or connection-oriented stateful firewalls (such as Linux's iptables). Homepage: https://openvpn.net/ Package: parted Status: install ok installed Priority: optional Section: admin Installed-Size: 278 Maintainer: Parted Maintainer Team Architecture: arm64 Multi-Arch: foreign Version: 3.2-25 Replaces: fsresize, parted1.6 Depends: libc6 (>= 2.17), libparted2 (= 3.2-25), libreadline7 (>= 6.0), libtinfo6 (>= 6) Suggests: parted-doc Conflicts: fsresize, parted1.6 Description: disk partition manipulator GNU Parted is a program that allows you to create, destroy, resize, move, and copy disk partitions. This is useful for creating space for new operating systems, reorganizing disk usage, and copying data to new hard disks. . This package contains the binary and manual page. Further documentation is available in parted-doc. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS, and PC98 partitioning formats, as well as a "loop" (raw disk) type which allows use on RAID/LVM. It can detect and remove ASFS/AFFS/APFS, Btrfs, ext2/3/4, FAT16/32, HFS, JFS, linux-swap, UFS, XFS, and ZFS file systems. Parted also has the ability to create and modify file systems of some of these types, but using it to perform file system operations is now deprecated. . The nature of this software means that any bugs could cause massive data loss. While there are no such bugs known at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Homepage: http://www.gnu.org/software/parted Package: passwd Status: install ok installed Priority: required Section: admin Installed-Size: 2541 Maintainer: Shadow package maintainers Architecture: arm64 Multi-Arch: foreign Source: shadow Version: 1:4.5-1.1 Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1) Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules Conffiles: /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63 Description: change and administer password and group data This package includes passwd, chsh, chfn, and many other programs to maintain password and group data. . Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian Homepage: https://github.com/shadow-maint/shadow Package: pavucontrol Status: install ok installed Priority: optional Section: sound Installed-Size: 933 Maintainer: Pulseaudio maintenance team Architecture: arm64 Version: 3.0-4 Depends: libatk1.0-0 (>= 1.12.4), libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libcairomm-1.0-1v5 (>= 1.12.0), libcanberra-gtk3-0 (>= 0.25), libcanberra0 (>= 0.16), libgcc1 (>= 1:3.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.54.0), libgtk-3-0 (>= 3.0.0), libgtkmm-3.0-1v5 (>= 3.22.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpangomm-1.4-1v5 (>= 2.40.0), libpulse-mainloop-glib0 (>= 0.99.1), libpulse0 (>= 4.0), libsigc++-2.0-0v5 (>= 2.2.0), libstdc++6 (>= 5.2), libx11-6 Recommends: pulseaudio Description: PulseAudio Volume Control PulseAudio Volume Control (pavucontrol) is a simple GTK+ based volume control tool (mixer) for the PulseAudio sound server. In contrast to classic mixer tools this one allows you to control both the volume of hardware devices and of each playback stream separately. It also allows you to redirect a playback stream to another output device without interrupting playback. Homepage: https://freedesktop.org/software/pulseaudio/pavucontrol/ Package: pciutils Status: deinstall ok config-files Priority: standard Section: admin Installed-Size: 1216 Maintainer: Anibal Monsalve Salazar Architecture: arm64 Multi-Arch: foreign Version: 1:3.5.2-1 Config-Version: 1:3.5.2-1 Depends: libc6 (>= 2.17), libkmod2 (>= 5~), libpci3 (= 1:3.5.2-1) Suggests: bzip2, wget | curl | lynx-cur Description: Linux PCI Utilities This package contains various utilities for inspecting and setting of devices connected to the PCI bus. Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml Package: pcmanfm Status: install ok installed Priority: optional Section: utils Installed-Size: 1585 Maintainer: Debian LXDE Maintainers Architecture: arm64 Version: 1.3.1-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libfm-gtk4 (>= 1.2.0), libfm4 (>= 1.2.0), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk2.0-0 (>= 2.24.32), libpango-1.0-0 (>= 1.20.0), libpangocairo-1.0-0 (>= 1.14.0), libpangoft2-1.0-0 (>= 1.14.0), libx11-6, shared-mime-info Recommends: gvfs-backends, gvfs-fuse, lxpolkit | polkit-1-auth-agent | policykit-1-gnome, lxde-icon-theme | gnome-icon-theme | oxygen-icon-theme | tango-icon-theme Conffiles: /etc/xdg/pcmanfm/default/pcmanfm.conf 0ac5c368d3eb3b4211c96e000371a998 Description: extremely fast and lightweight file manager PCMan File Manager is a GTK+ based file manager, featuring: . * Extremely fast and lightweight * Can be started in one second on normal machine * Tabbed browsing (similar to Firefox) * Drag & Drop support * Files can be dragged among tabs * Load large directories in reasonable time * File association support (Default application) * Basic thumbnail support * Bookmarks support * Handles non-UTF-8 encoded filenames correctly * Provide icon view and detailed list view * Standard compliant (Follows FreeDesktop.org) * Clean and user-friendly interface (GTK+ 2) * Support GVFS for auto-mount handling on removable devices Homepage: http://pcmanfm.sourceforge.net/ Package: perl Status: install ok installed Priority: standard Section: perl Installed-Size: 575 Maintainer: Niko Tyni Architecture: arm64 Multi-Arch: allowed Version: 5.28.1-6+deb10u1 Replaces: perl-modules (<< 5.22.0~) Provides: libansicolor-perl (= 4.06), libarchive-tar-perl (= 2.30), libattribute-handlers-perl (= 1.01), libautodie-perl (= 2.29-2), libcompress-raw-bzip2-perl (= 2.074), libcompress-raw-zlib-perl (= 2.076), libcompress-zlib-perl (= 2.074), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.140), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.55), libdigest-perl (= 1.17.01), libdigest-sha-perl (= 6.01), libencode-perl (= 2.97), libexperimental-perl (= 0.019), libextutils-cbuilder-perl (= 0.280230), libextutils-command-perl (= 7.34), libextutils-install-perl (= 2.14), libextutils-parsexs-perl (= 3.390000), libfile-spec-perl (= 3.7400), libhttp-tiny-perl (= 0.070), libi18n-langtags-perl (= 0.43), libio-compress-base-perl (= 2.074), libio-compress-bzip2-perl (= 2.074), libio-compress-perl (= 2.074), libio-compress-zlib-perl (= 2.074), libio-zlib-perl (= 1.10), libjson-pp-perl (= 2.97001), liblocale-maketext-perl (= 1.29), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 1.999811), libmath-complex-perl (= 1.5901), libmime-base64-perl (= 3.15), libmodule-corelist-perl (= 5.20181129.28), libmodule-load-conditional-perl (= 0.68), libmodule-load-perl (= 0.32), libmodule-metadata-perl (= 1.000033), libnet-perl (= 1:3.11), libnet-ping-perl (= 2.62), libparams-check-perl (= 0.38), libparent-perl (= 0.236), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-parser-perl (= 1.63), libpod-simple-perl (= 3.35), libstorable-perl (= 3.08), libsys-syslog-perl (= 0.35), libtest-harness-perl (= 3.42), libtest-simple-perl (= 1.302133), libtest-tester-perl (= 1.302133), libtest-use-ok-perl (= 1.302133), libthread-queue-perl (= 3.12), libthreads-perl (= 2.22), libthreads-shared-perl (= 1.58), libtime-hires-perl (= 1.9759), libtime-local-perl (= 1.2500), libtime-piece-perl (= 1.3204), libunicode-collate-perl (= 1.25), libversion-perl (= 1:0.9923), libversion-requirements-perl, perl-cross-config, podlators-perl (= 4.10) Depends: perl-base (= 5.28.1-6+deb10u1), perl-modules-5.28 (>= 5.28.1-6+deb10u1), libperl5.28 (= 5.28.1-6+deb10u1) Pre-Depends: dpkg (>= 1.17.17) Recommends: netbase Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libb-debug-perl, liblocale-codes-perl Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.28.1-1) Conflicts: libjson-pp-perl (<< 2.27200-2) Conffiles: /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733 Description: Larry Wall's Practical Extraction and Report Language Perl is a highly capable, feature-rich programming language with over 20 years of development. Perl 5 runs on over 100 platforms from portables to mainframes. Perl is suitable for both rapid prototyping and large scale development projects. . Perl 5 supports many programming styles, including procedural, functional, and object-oriented. In addition to this, it is supported by an ever-growing collection of reusable modules which accelerate development. Some of these modules include Web frameworks, database integration, networking protocols, and encryption. Perl provides interfaces to C and C++ for custom extension development. Homepage: http://dev.perl.org/perl5/ Package: perl-base Essential: yes Status: install ok installed Priority: required Section: perl Installed-Size: 9805 Maintainer: Niko Tyni Architecture: arm64 Source: perl Version: 5.28.1-6+deb10u1 Replaces: libfile-path-perl (<< 2.15), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.39), libscalar-list-utils-perl (<< 1:1.50), libsocket-perl (<< 2.027), libxsloader-perl (<< 0.30), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3) Provides: libfile-path-perl (= 2.15), libfile-temp-perl (= 0.2304), libio-socket-ip-perl (= 0.39), libscalar-list-utils-perl (= 1:1.50), libsocket-perl (= 2.027), libxsloader-perl (= 0.30), perlapi-5.28.0, perlapi-5.28.1 Pre-Depends: libc6 (>= 2.28), dpkg (>= 1.17.17) Suggests: perl, sensible-utils Breaks: amanda-common (<< 1:3.3.9-2), backuppc (<< 3.3.1-2), debconf (<< 1.5.61), dh-haskell (<< 0.3), intltool (<< 0.51.0-4), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.15), libfile-spec-perl (<< 3.7400), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.39), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.50), libsocket-perl (<< 2.027), libxsloader-perl (<< 0.30), mailagent (<< 1:3.1-81-2), perl (<< 5.28.1~), perl-modules (<< 5.28.1~), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8) Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41) Description: minimal Perl system Perl is a scripting language used in many system scripts and utilities. . This package provides a Perl interpreter and the small subset of the standard run-time library required to perform basic tasks. For a full Perl installation, install "perl" (and its dependencies, "perl-modules-5.28" and "perl-doc"). Homepage: http://dev.perl.org/perl5/ Package: perl-modules-5.28 Status: install ok installed Priority: standard Section: perl Installed-Size: 18894 Maintainer: Niko Tyni Architecture: all Multi-Arch: foreign Source: perl Version: 5.28.1-6+deb10u1 Replaces: libansicolor-perl (<< 4.06), libarchive-tar-perl (<< 2.30), libattribute-handlers-perl (<< 1.01), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.019), libextutils-cbuilder-perl (<< 0.280230), libextutils-command-perl (<< 7.34), libextutils-install-perl (<< 2.14), libextutils-parsexs-perl (<< 3.390000), libfile-spec-perl (<< 3.7400), libhttp-tiny-perl (<< 0.070), libi18n-langtags-perl (<< 0.43), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.97001), liblocale-maketext-perl (<< 1.29), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999811), libmath-complex-perl (<< 1.5901), libmodule-corelist-perl (<< 5.20181129.28), libmodule-load-conditional-perl (<< 0.68), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000033), libnet-perl (<< 1:3.11), libnet-ping-perl (<< 2.62), libparams-check-perl (<< 0.38), libparent-perl (<< 0.236), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.35), libtest-harness-perl (<< 3.42), libtest-simple-perl (<< 1.302133), libtest-tester-perl (<< 1.302133), libtest-use-ok-perl (<< 1.302133), libthread-queue-perl (<< 3.12), libtime-local-perl (<< 1.2500), libunicode-collate-perl (<< 1.25), libversion-perl (<< 1:0.9923), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 4.10) Provides: perl-modules Depends: perl-base (>= 5.28.1-1) Pre-Depends: dpkg (>= 1.17.17) Recommends: perl (>= 5.28.1-1) Breaks: libansicolor-perl (<< 4.06), libarchive-tar-perl (<< 2.30), libattribute-handlers-perl (<< 1.01), libautodie-perl (<< 2.29-2), libb-debug-perl (<< 1.26), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.019), libextutils-cbuilder-perl (<< 0.280230), libextutils-command-perl (<< 7.34), libextutils-install-perl (<< 2.14), libextutils-parsexs-perl (<< 3.390000), libfile-spec-perl (<< 3.7400), libhttp-tiny-perl (<< 0.070), libi18n-langtags-perl (<< 0.43), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.97001), liblocale-codes-perl (<< 3.56), liblocale-maketext-perl (<< 1.29), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999811), libmath-complex-perl (<< 1.5901), libmodule-corelist-perl (<< 5.20181129.28), libmodule-load-conditional-perl (<< 0.68), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000033), libnet-perl (<< 1:3.11), libnet-ping-perl (<< 2.62), libparams-check-perl (<< 0.38), libparent-perl (<< 0.236), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.35), libtest-harness-perl (<< 3.42), libtest-simple-perl (<< 1.302133), libtest-tester-perl (<< 1.302133), libtest-use-ok-perl (<< 1.302133), libthread-queue-perl (<< 3.12), libtime-local-perl (<< 1.2500), libunicode-collate-perl (<< 1.25), libversion-perl (<< 1:0.9923), maildirsync (<< 1.2-2.1), perl (<< 5.28.1~), podlators-perl (<< 4.10) Conflicts: perl-modules (<< 5.22.0~) Description: Core Perl modules Architecture independent Perl modules. These modules are part of Perl and required if the `perl' package is installed. . Note that this package only exists to save archive space and should be considered an internal implementation detail of the `perl' package. Other packages should not depend on `perl-modules-5.28' directly, they should use `perl' (which depends on `perl-modules-5.28') instead. Homepage: http://dev.perl.org/perl5/ Package: perl-openssl-defaults Status: install ok installed Priority: optional Section: perl Installed-Size: 27 Maintainer: Debian Perl Group Architecture: arm64 Multi-Arch: same Version: 3 Provides: perl-openssl-abi-1.1 Depends: libc6 (>= 2.17), libssl1.1 (>= 1.1.0) Breaks: libcrypt-openssl-bignum-perl (<< 0.07-2), libcrypt-openssl-dsa-perl (<< 0.18-2), libcrypt-openssl-pkcs10-perl (<< 0.16-2), libcrypt-openssl-pkcs12-perl (<< 0.7-3), libcrypt-openssl-rsa-perl (<< 0.28-5), libcrypt-openssl-x509-perl (<< 1.8.7-3), libcrypt-smime-perl (<< 0.19-2), libcrypt-ssleay-perl (<< 0.73.04-2), libnet-ssleay-perl (<< 1.78-2) Description: version compatibility baseline for Perl OpenSSL packages A subset of Perl XS module packages expose the OpenSSL binary interface to Perl code. This can lead to incompatibilities if these packages are linked against different versions of OpenSSL. . This package provides a virtual package "perl-openssl-abi-x" that corresponds to the libssl-dev package SONAME it was built against. The packages that need to stay compatible with each other can depend on this. . Tools are also provided for generating this dependency with minimum hassle. See the instructions in README.Debian. Package: pinentry-curses Status: install ok installed Priority: optional Section: utils Installed-Size: 117 Maintainer: Debian GnuPG Maintainers Architecture: arm64 Source: pinentry Version: 1.1.0-2 Provides: pinentry Depends: libassuan0 (>= 2.1.0), libc6 (>= 2.17), libgpg-error0 (>= 1.16), libncursesw6 (>= 6), libtinfo6 (>= 6) Suggests: pinentry-doc Enhances: gnupg-agent Description: curses-based PIN or pass-phrase entry dialog for GnuPG This package contains a program that allows for secure entry of PINs or pass phrases. That means it tries to take care that the entered information is not swapped to disk or temporarily stored anywhere. This functionality is particularly useful for entering pass phrases when using encryption software such as GnuPG or e-mail clients using the same. It uses an open protocol and is therefore not tied to particular software. . The program contained in this package implements a PIN entry dialog using the curses tool kit, meaning that it is useful for users working in text mode without the X Window System. There are sibling packages that implement PIN entry dialogs that use an X tool kit. If you install any of the graphical packages then this package is not necessary because the sibling packages automatically fall back to text mode if X is not active. Homepage: https://www.gnupg.org/related_software/pinentry/ Package: pkg-config Status: deinstall ok config-files Priority: optional Section: devel Installed-Size: 187 Maintainer: Tollef Fog Heen Architecture: arm64 Multi-Arch: foreign Version: 0.29-6 Config-Version: 0.29-6 Replaces: pkg-config-bin Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.16.0), libdpkg-perl Suggests: dpkg-dev Conflicts: pkg-config-bin Conffiles: /etc/dpkg/dpkg.cfg.d/pkg-config-hook-config 467c877de00898418a9b26d432a1719a Description: manage compile and link flags for libraries pkg-config is a system for managing library compile and link flags that works with automake and autoconf. . Increasingly libraries ship with ".pc" files that allow querying of the compiler and linker flags needed to use them through the pkg-config(1) program. Homepage: http://pkg-config.freedesktop.org Package: pm-utils Status: deinstall ok config-files Priority: optional Section: admin Installed-Size: 283 Maintainer: Debian QA Group Architecture: all Version: 1.4.1-18 Config-Version: 1.4.1-18 Depends: powermgmt-base Recommends: vbetool, procps, hdparm, ethtool, kbd | console-tools Suggests: cpufrequtils, wireless-tools, radeontool Conffiles: /etc/kernel/postinst.d/pm-utils 5b2be1c56ee085b4e54fd192a6d687aa /etc/logrotate.d/pm-utils 9eb4057eeedc809f704b9b52701548db Description: utilities and scripts for power management This package provides simple shell command line tools to suspend and hibernate your computer. Homepage: http://pm-utils.freedesktop.org/ Package: policykit-1 Status: install ok installed Priority: optional Section: admin Installed-Size: 223 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: foreign Version: 0.105-25+deb10u1 Depends: dbus, libpam-systemd, libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 0.105-25+deb10u1), libpolkit-backend-1-0 (= 0.105-25+deb10u1), libpolkit-gobject-1-0 (= 0.105-25+deb10u1) Conffiles: /etc/pam.d/polkit-1 7c794427f656539b0d4659b030904fe0 /etc/polkit-1/localauthority.conf.d/50-localauthority.conf 2adb9d174807b0a3521fabf03792fbc8 /etc/polkit-1/localauthority.conf.d/51-debian-sudo.conf 9597936a18327125ef4f56791f307149 /etc/polkit-1/nullbackend.conf.d/50-nullbackend.conf 1619df1aeee5c92bf19446a820274e5a Description: framework for managing administrative policies and privileges PolicyKit is an application-level toolkit for defining and handling the policy that allows unprivileged processes to speak to privileged processes. . It is a framework for centralizing the decision making process with respect to granting access to privileged operations for unprivileged (desktop) applications. Homepage: https://www.freedesktop.org/wiki/Software/polkit/ Package: policykit-1-gnome Status: install ok installed Priority: optional Section: gnome Installed-Size: 492 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: foreign Version: 0.105-7 Provides: polkit-1-auth-agent Depends: policykit-1, libc6 (>= 2.17), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.37.3), libgtk-3-0 (>= 3.0.0), libpolkit-agent-1-0 (>= 0.99), libpolkit-gobject-1-0 (>= 0.99) Conffiles: /etc/xdg/autostart/polkit-gnome-authentication-agent-1.desktop 1bb19eed91df18324c182069f0540b05 Description: authentication agent for PolicyKit PolicyKit-gnome provides a D-Bus session bus service that is used to bring up authentication dialogs used for obtaining privileges. . This implementation was originally designed for GNOME 2, but most GNOME-based desktop environments, including GNOME 3, GNOME Flashback, and MATE, have their own built-in PolicyKit agents and no longer use this one. The remaining users of this implementation are Cinnamon, XFCE and Unity. Homepage: https://wiki.gnome.org/Projects/PolicyKit Package: powertop Status: deinstall ok config-files Priority: extra Section: utils Installed-Size: 584 Maintainer: Jose Luis Rivas Architecture: arm64 Source: powertop (2.8-1) Version: 2.8-1+b2 Config-Version: 2.8-1+b2 Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.0), libncurses6 (>= 6), libncursesw6 (>= 6), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libpci3 (>= 1:3.5.2-1), libstdc++6 (>= 5.2), libtinfo6 (>= 6) Suggests: cpufrequtils, laptop-mode-tools Description: diagnose issues with power consumption and management PowerTOP is a Linux tool to diagnose issues with power consumption and power management. In addition to being a diagnostic tool, PowerTOP also has an interactive mode you can use to experiment with various power management settings, for cases where the Linux distribution has not enabled those settings. . PowerTOP reports which components in the system are most likely to blame for higher-than-needed power consumption, ranging from software applications to active components in the system. Detailed screens are available for CPU C and P states, device activity, and software activity. Homepage: https://01.org/powertop/ Package: ppp Status: deinstall ok config-files Priority: optional Section: admin Installed-Size: 962 Maintainer: Chris Boot Architecture: arm64 Version: 2.4.7-2+4.1+deb10u1 Config-Version: 2.4.7-2+4.1+deb10u1 Depends: libpam-modules, libpam-runtime, lsb-base, procps, libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libpcap0.8 (>= 0.9.8), libssl1.1 (>= 1.1.0) Breaks: network-manager (<< 0.9.8.8-7~), network-manager-pptp (<< 0.9.8.4-3~), pppdcapiplugin (<< 1:3.25+dfsg1-3.4~) Conffiles: /etc/chatscripts/gprs 49518071cd909518f6c79480b69cd10c /etc/chatscripts/pap 17dbbede1dc894aa6c6c4e8be5727c1d /etc/init.d/pppd-dns 4ed1a6fd54897767efb2cfef6062e376 /etc/logrotate.d/ppp 8434ebaff1b3b33bb0ea0bce523adfd3 /etc/pam.d/ppp cc163be3dbe4258e639238ccd5bcdea0 /etc/ppp/ip-down 85d38850a138c53ae48bd2736b1b2753 /etc/ppp/ip-down.d/0000usepeerdns aaae5708fe89b23c76b94fc9862e1381 /etc/ppp/ip-up bb4b48272ac4adf06cbc6caf4ede3a1c /etc/ppp/ip-up.d/0000usepeerdns bab9720708c00e7ebba8bfb7d32077dd /etc/ppp/ipv6-down e11550beb886ac90b2b79f0b9fea67d6 /etc/ppp/ipv6-up 047b617b3d150aeed5e1c7fea7e14e04 /etc/ppp/options 8bf2e0b8499592fa1c119818fe5a326f Description: Point-to-Point Protocol (PPP) - daemon The Point-to-Point Protocol provides a standard way to transmit datagrams over a serial link, as well as a standard way for the machines at either end of the link to negotiate various optional characteristics of the link. . This package is most commonly used to manage a modem for dial-up or certain kinds of broadband connections. Homepage: http://ppp.samba.org/ Package: pptp-linux Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 122 Maintainer: Christoph Biedl Architecture: arm64 Version: 1.10.0-1 Config-Version: 1.10.0-1 Depends: libc6 (>= 2.17), ppp Conffiles: /etc/ppp/options.pptp d7a9dcb92832f4bf6dae77bacde7462b Description: Point-to-Point Tunneling Protocol (PPTP) Client Client for the proprietary Microsoft Point-to-Point Tunneling Protocol, PPTP. Allows connection to a PPTP based VPN as used by employers and some cable and ADSL service providers. Homepage: http://pptpclient.sourceforge.net/ Package: procps Status: install ok installed Priority: important Section: admin Installed-Size: 741 Maintainer: Craig Small Architecture: arm64 Multi-Arch: foreign Version: 2:3.3.15-2 Provides: watch Depends: libc6 (>= 2.27), libncurses6 (>= 6), libncursesw6 (>= 6), libprocps7 (>= 2:3.3.15-1), libtinfo6 (>= 6), lsb-base (>= 3.0-10), init-system-helpers (>= 1.29~) Recommends: psmisc Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1) Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3) Conffiles: /etc/init.d/procps f2e4546011b2960ac898b532becbc1f8 /etc/sysctl.conf 08d130f6eb93c063d0b45a05bdbe784f /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089 /etc/sysctl.d/protect-links.conf 165698699efd8936433f95cc7cea518f Description: /proc file system utilities This package provides command line and full screen utilities for browsing procfs, a "pseudo" file system dynamically generated by the kernel to provide information about the status of entries in its process table (such as whether the process is running, stopped, or a "zombie"). . It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop, snice, sysctl, tload, top, uptime, vmstat, w, and watch. Homepage: https://gitlab.com/procps-ng/procps Package: psmisc Status: install ok installed Priority: optional Section: admin Installed-Size: 598 Maintainer: Craig Small Architecture: arm64 Multi-Arch: foreign Version: 23.2-1+deb10u1 Replaces: procps (<< 1:1.2) Depends: libc6 (>= 2.17), libselinux1 (>= 1.32), libtinfo6 (>= 6) Description: utilities that use the proc file system This package contains miscellaneous utilities that use the proc FS: . - fuser: identifies processes that are using files or sockets. - killall: kills processes by name (e.g. "killall -HUP named"). - peekfd: shows the data traveling over a file descriptor. - pstree: shows currently running processes as a tree. - prtstat: print the contents of /proc//stat Homepage: http://psmisc.sf.net/ Package: pulseaudio Status: hold ok installed Priority: optional Section: sound Installed-Size: 3411 Maintainer: Pulseaudio maintenance team Architecture: arm64 Multi-Arch: foreign Version: 13.99.3-1 Depends: libasound2 (>= 1.1.0), libc6 (>= 2.27), libdbus-1-3 (>= 1.9.14), libgcc1 (>= 1:3.0), libice6 (>= 1:1.0.0), libltdl7 (>= 2.4.6), libpulse0 (= 13.99.3-1), libsm6, libsndfile1 (>= 1.0.20), libspeexdsp1 (>= 1.2~beta3.2-1), libstdc++6 (>= 4.1.1), libsystemd0, libudev1 (>= 183), libwebrtc-audio-processing1, libx11-6, libx11-xcb1, libxcb1, libxtst6, init-system-helpers (>= 1.52), adduser, lsb-base (>= 3.2-13), libasound2-plugins, pulseaudio-utils Recommends: rtkit, libpam-systemd, dbus-user-session Suggests: udev, pavumeter, pavucontrol, paman, paprefs Conffiles: /etc/dbus-1/system.d/pulseaudio-system.conf 3c47ffdd82462606b3cccef9276497a7 /etc/pulse/daemon.conf 3ec6c869eda06c9a9a656b0c1be7a0f2 /etc/pulse/default.pa 283fcecf95ba2dba6c3ed3d9b90970f0 /etc/pulse/system.pa 8cc7ccecf1e5d7829c6c0dd6386499b0 /etc/xdg/autostart/pulseaudio.desktop bc4ca8baa860aa3f9e7050010f1b6d8c obsolete Description: PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . These are some of PulseAudio's features: . * High quality software mixing of multiple audio streams with support for more than one sink/source. May be used to combine multiple sound cards into one (with sample rate adjustment). . * Wide range of supported client libraries. ESD, ALSA, oss, libao and GStreamer client applications are supported as-is. Native PulseAudio plug-ins are also available for xmms and mplayer. . * Good low latency behaviour and very accurate latency measurement for playback and recording. Ability to fully synchronize multiple playback streams. . * Network transparency, allowing an application to play back or record audio on a different machine than the one it is running on. . * Extensible plug-in architecture with plug-ins for jackd, multicast-rtp lirc and avahi, just to name a few. . This package contains the daemon and basic module set. Homepage: https://www.pulseaudio.org Package: pulseaudio-utils Status: hold ok installed Priority: optional Section: sound Installed-Size: 186 Maintainer: Pulseaudio maintenance team Architecture: arm64 Source: pulseaudio Version: 13.99.3-1 Depends: libc6 (>= 2.17), libice6 (>= 1:1.0.0), libpulse0 (>= 13.99.3), libsm6, libsndfile1 (>= 1.0.20), libx11-6, libx11-xcb1, libxcb1, libxtst6, libpulsedsp Suggests: avahi-daemon, pulseaudio Description: Command line tools for the PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . These tools provide command line access to various features of the PulseAudio sound server. Included tools are: . paplay - Playback a WAV file via a PulseAudio sink. pacat - Cat raw audio data to a PulseAudio sink. parec - Cat raw audio data from a PulseAudio source. pacmd - Connect to PulseAudio's built-in command line control interface. pactl - Send a control command to a PulseAudio server. padsp - /dev/dsp wrapper to transparently support OSS applications. pax11publish - Store/retrieve PulseAudio default server/sink/source settings in the X11 root window. Homepage: https://www.pulseaudio.org Package: python Status: deinstall ok config-files Priority: optional Section: python Installed-Size: 68 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: allowed Source: python-defaults Version: 2.7.16-1 Config-Version: 2.7.16-1 Replaces: python-dev (<< 2.6.5-2) Provides: python-ctypes, python-email, python-importlib, python-profiler, python-wsgiref Depends: python2.7 (>= 2.7.16-1~), libpython-stdlib (= 2.7.16-1), python2 (= 2.7.16-1) Pre-Depends: python-minimal (= 2.7.16-1) Suggests: python-doc (= 2.7.16-1), python-tk (>= 2.7.16-1~) Breaks: update-manager-core (<< 0.200.5-2) Conflicts: python-central (<< 0.5.5) Description: interactive high-level object-oriented language (Python2 version) Python2, the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package is a dependency package, which depends on Debian's Python2 version (currently v2.7). Homepage: https://www.python.org/ Cnf-Extra-Commands: python Cnf-Priority-Bonus: 3 Package: python2.7-minimal Status: deinstall ok config-files Priority: optional Section: python Installed-Size: 3652 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: allowed Source: python2.7 Version: 2.7.16-2+deb10u1 Config-Version: 2.7.16-2+deb10u1 Replaces: python2.7 (<< 2.7.8-7~) Depends: libpython2.7-minimal (= 2.7.16-2+deb10u1) Pre-Depends: libc6 (>= 2.28), zlib1g (>= 1:1.2.0) Recommends: python2.7 Suggests: binfmt-support Conflicts: binfmt-support (<< 1.1.2) Description: Minimal subset of the Python language (version 2.7) This package contains the interpreter and some essential modules. It can be used in the boot process for some basic tasks. See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules contained in this package. Package: python3 Status: install ok installed Priority: optional Section: python Installed-Size: 187 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: allowed Source: python3-defaults Version: 3.7.3-1 Replaces: python3-minimal (<< 3.1.2-2) Provides: python3-profiler Depends: python3.7 (>= 3.7.3-1~), libpython3-stdlib (= 3.7.3-1) Pre-Depends: python3-minimal (= 3.7.3-1) Suggests: python3-doc (>= 3.7.3-1), python3-tk (>= 3.7.2-1~), python3-venv (>= 3.7.3-1) Description: interactive high-level object-oriented language (default python3 version) Python, the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package is a dependency package, which depends on Debian's default Python 3 version (currently v3.7). Homepage: https://www.python.org/ Cnf-Extra-Commands: python Cnf-Priority-Bonus: 5 Package: python3-cairo Status: install ok installed Priority: optional Section: python Installed-Size: 458 Maintainer: Debian Python Modules Team Architecture: arm64 Multi-Arch: same Source: pycairo (1.16.2-1) Version: 1.16.2-1+b1 Provides: python3.6-cairo, python3.7-cairo Depends: python3 (<< 3.8), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), libc6 (>= 2.17), libcairo2 (>= 1.14.0) Description: Python3 bindings for the Cairo vector graphics library This package contains modules that allow you to use the Cairo vector graphics library in Python3 programs. Homepage: http://cairographics.org/pycairo/ Package: python3-certifi Status: install ok installed Priority: optional Section: python Installed-Size: 300 Maintainer: Sebastien Delafond Architecture: all Source: python-certifi Version: 2018.8.24-1 Depends: python3:any (>= 3.4~), ca-certificates Description: root certificates for validating SSL certs and verifying TLS hosts (python3) Certifi is a carefully curated collection of Root Certificates for validating the trustworthiness of SSL certificates while verifying the identity of TLS hosts. It has been extracted from the Requests project. . The version of certifi in this Debian package is patched to return the location of Debian-provided CA certificates, instead of those packaged by upstream. . This is the python3 package. Homepage: https://github.com/certifi/python-certifi Package: python3-chardet Status: install ok installed Priority: optional Section: python Installed-Size: 411 Maintainer: Piotr Ożarowski Architecture: all Multi-Arch: foreign Source: chardet Version: 3.0.4-3 Depends: python3:any, python3-pkg-resources Description: universal character encoding detector for Python3 Chardet takes a sequence of bytes in an unknown character encoding, and attempts to determine the encoding. . Supported encodings: * ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants) * Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified Chinese) * EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese) * EUC-KR, ISO-2022-KR (Korean) * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic) * ISO-8859-2, windows-1250 (Hungarian) * ISO-8859-5, windows-1251 (Bulgarian) * windows-1252 (English) * ISO-8859-7, windows-1253 (Greek) * ISO-8859-8, windows-1255 (Visual and Logical Hebrew) * TIS-620 (Thai) . This library is a port of the auto-detection code in Mozilla. . This package contains the Python 3 version of the library. Homepage: https://github.com/chardet/chardet Package: python3-dbus Status: install ok installed Priority: optional Section: python Installed-Size: 407 Maintainer: Utopia Maintenance Team Architecture: arm64 Source: dbus-python Version: 1.2.8-3 Provides: python3.7-dbus Depends: python3 (<< 3.8), python3 (>= 3.7~), python3:any, libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.40) Recommends: python3-gi Suggests: python-dbus-doc, python3-dbus-dbg Description: simple interprocess messaging system (Python 3 interface) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package provides a Python 3 interface to D-Bus. . See the dbus description for more information about D-Bus in general. Homepage: http://www.freedesktop.org/wiki/Software/DBusBindings#Python Package: python3-distutils Status: install ok installed Priority: optional Section: python Installed-Size: 698 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: python3-stdlib-extensions Version: 3.7.3-1 Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-2) Provides: python3.7-distutils Depends: python3 (>= 3.7.1-1~), python3 (<< 3.8), python3-lib2to3 (>= 3.6.4) Breaks: libpython3.6-stdlib (<< 3.6.5~rc1-3), libpython3.7-stdlib (<< 3.7.0~b2-2) Description: distutils package for Python 3.x Distutils package for Python 3.x. This package contains the distutils module from the Python standard library. Package: python3-gi Status: install ok installed Priority: optional Section: python Installed-Size: 1044 Maintainer: Debian GNOME Maintainers Architecture: arm64 Source: pygobject Version: 3.30.4-1 Depends: gir1.2-glib-2.0 (>= 1.39.0), python3 (<< 3.8), python3 (>= 3.6~), python3:any, libc6 (>= 2.17), libffi6 (>= 3.2), libgirepository-1.0-1 (>= 1.44.0), libglib2.0-0 (>= 2.41.1) Description: Python 3 bindings for gobject-introspection libraries GObject is an abstraction layer that allows programming with an object paradigm that is compatible with many languages. It is a part of Glib, the core library used to build GTK+ and GNOME. . This package contains the Python 3 binding generator for libraries that support gobject-introspection, i. e. which ship a gir1.2-- package. With these packages, the libraries can be used from Python 3. Homepage: https://wiki.gnome.org/Projects/PyGObject Package: python3-gi-cairo Status: install ok installed Priority: optional Section: python Installed-Size: 67 Maintainer: Debian GNOME Maintainers Architecture: arm64 Source: pygobject Version: 3.30.4-1 Depends: python3-cairo (>= 1.11.1), python3-gi (= 3.30.4-1), python3 (<< 3.8), python3 (>= 3.6~), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.10.0), libglib2.0-0 (>= 2.38.0) Description: Python 3 Cairo bindings for the GObject library GObject is an abstraction layer that allows programming with an object paradigm that is compatible with many languages. It is a part of Glib, the core library used to build GTK+ and GNOME. . This package contains the Python 3 Cairo bindings for GObject. It is mostly used by other bindings to map their GObjects to Python objects. Homepage: https://wiki.gnome.org/Projects/PyGObject Package: python3-idna Status: install ok installed Priority: optional Section: python Installed-Size: 292 Maintainer: Debian Python Modules Team Architecture: all Source: python-idna Version: 2.6-1+deb10u1 Depends: python3:any (>= 3.3~) Description: Python IDNA2008 (RFC 5891) handling (Python 3) A library to support the Internationalised Domain Names in Applications (IDNA) protocol as specified in RFC 5891. This version of the protocol is often referred to as “IDNA2008” and can produce different results from the earlier standard from 2003. . The library is also intended to act as a suitable drop-in replacement for the “encodings.idna” module that comes with the Python standard library but currently only supports the older 2003 specification. . This package contains the module for Python 3. Homepage: https://github.com/kjd/idna Package: python3-lib2to3 Status: install ok installed Priority: optional Section: python Installed-Size: 363 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: python3-stdlib-extensions Version: 3.7.3-1 Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3) Provides: python3.7-lib2to3 Depends: python3 (>= 3.7.1-1~), python3 (<< 3.8) Breaks: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3) Description: Interactive high-level object-oriented language (2to3, version 3.6) Python is a high-level, interactive, object-oriented language. Its 3.6 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the lib2to3 library. Package: python3-minimal Status: install ok installed Priority: optional Section: python Installed-Size: 121 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: allowed Source: python3-defaults Version: 3.7.3-1 Depends: dpkg (>= 1.13.20) Pre-Depends: python3.7-minimal (>= 3.7.3-1~) Description: minimal subset of the Python language (default python3 version) This package contains the interpreter and some essential modules. It's used in the boot process for some basic tasks. See /usr/share/doc/python3.7-minimal/README.Debian for a list of the modules contained in this package. Homepage: https://www.python.org/ Package: python3-pkg-resources Status: install ok installed Priority: optional Section: python Installed-Size: 534 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: python-setuptools Version: 40.8.0-1 Depends: python3:any Suggests: python3-setuptools Description: Package Discovery and Resource Access using pkg_resources The pkg_resources module provides an API for Python libraries to access their resource files, and for extensible applications and frameworks to automatically discover plugins. It also provides runtime support for using C extensions that are inside zipfile-format eggs, support for merging packages that have separately-distributed modules or subpackages, and APIs for managing Python's current "working set" of active packages. Homepage: https://pypi.python.org/pypi/setuptools Package: python3-requests Status: install ok installed Priority: optional Section: python Installed-Size: 224 Maintainer: Debian Python Modules Team Architecture: all Source: requests Version: 2.21.0-1+deb10u1 Depends: python3-certifi, python3-chardet (<< 3.1.0), python3-idna, python3-urllib3 (<< 1.25), python3:any, ca-certificates, python3-chardet (>= 3.0.2), python3-urllib3 (>= 1.21.1) Suggests: python3-cryptography, python3-idna (>= 2.5), python3-openssl, python3-socks Breaks: awscli (<< 1.11.139) Description: elegant and simple HTTP library for Python3, built for human beings Requests allow you to send HTTP/1.1 requests. You can add headers, form data, multipart files, and parameters with simple Python dictionaries, and access the response data in the same way. It's powered by httplib and urllib3, but it does all the hard work and crazy hacks for you. . Features . - International Domains and URLs - Keep-Alive & Connection Pooling - Sessions with Cookie Persistence - Browser-style SSL Verification - Basic/Digest Authentication - Elegant Key/Value Cookies - Automatic Decompression - Unicode Response Bodies - Multipart File Uploads - Connection Timeouts . This package contains the Python 3 version of the library. Homepage: http://python-requests.org Package: python3-six Status: install ok installed Priority: optional Section: python Installed-Size: 60 Maintainer: Debian Python Modules Team Architecture: all Multi-Arch: foreign Source: six Version: 1.12.0-1 Depends: python3:any Description: Python 2 and 3 compatibility library (Python 3 interface) Six is a Python 2 and 3 compatibility library. It provides utility functions for smoothing over the differences between the Python versions with the goal of writing Python code that is compatible on both Python versions. . This package provides Six on the Python 3 module path. It is complemented by python-six and pypy-six. Homepage: https://pypi.python.org/pypi/six Package: python3-urllib3 Status: install ok installed Priority: optional Section: python Installed-Size: 390 Maintainer: Debian Python Modules Team Architecture: all Source: python-urllib3 Version: 1.24.1-1+deb10u2 Depends: python3:any, python3-six Recommends: ca-certificates Suggests: python3-cryptography, python3-idna, python3-openssl, python3-socks Description: HTTP library with thread-safe connection pooling for Python3 urllib3 supports features left out of urllib and urllib2 libraries. . - Re-use the same socket connection for multiple requests (HTTPConnectionPool and HTTPSConnectionPool) (with optional client-side certificate verification). - File posting (encode_multipart_formdata). - Built-in redirection and retries (optional). - Supports gzip and deflate decoding. - Thread-safe and sanity-safe. - Small and easy to understand codebase perfect for extending and building upon. . This package contains the Python 3 version of the library. Homepage: http://urllib3.readthedocs.org Package: python3.7 Status: install ok installed Priority: optional Section: python Installed-Size: 409 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: allowed Version: 3.7.3-2+deb10u7 Depends: python3.7-minimal (= 3.7.3-2+deb10u7), libpython3.7-stdlib (= 3.7.3-2+deb10u7), mime-support Suggests: python3.7-venv, python3.7-doc, binutils Breaks: diffoscope (<< 98), fail2ban (<= 0.10.2-2), gnome-builder (<< 3.28.3-1), gpodder (<< 3.10.3-2), libboost-python1.62.0 (<< 1.62.0+dfsg-6), linux-show-player (<= 0.5-1), oca-core (<= 11.0.20180420-1), openscap-daemon (<< 0.1.10-3), patroni (<< 1.4.4-2), python3-aiomeasures (<< 0.5.14-2), python3-aiopg (<= 0.14.0-1), python3-aiozmq (<= 0.7.1-2), python3-all (<< 3.6.5~rc1-1), python3-applicationinsights (<= 0.11.0-1), python3-astroid (<= 1.6.5-1), python3-astroquery (<= 0.3.8+dfsg-2), python3-async (<= 0.6.2-2), python3-azure (<= 20170915+git-1), python3-blist (<< 1.3.6-5), python3-celery (<= 4.2.0-1), python3-cs (<< 2.3.1-1), python3-cxx-dev (<< 7.0.3-2), python3-dev (<< 3.6.5~rc1-1), python3-django (<< 1:1.11.13-2), python3-dkim (<< 0.9.0), python3-dns (<< 3.2.0-1), python3-doublex (<= 1.8.2-1), python3-dropbox (<= 8.7.1-1), python3-engineio (<= 1.6.1-1), python3-exabgp (<< 4.0.8-1), python3-gbulb (<= 0.5.3-2), python3-glance (<= 2:16.0.1-6), python3-http-parser (<= 0.8.3-2+b3), python3-hug (<= 2.3.0-1.1), python3-jira (<= 1.0.10-1), python3-libcloud (<= 2.3.0-1), python3-mastodon (<= 1.2.2-1), python3-maxminddb (<< 1.4.1-1~), python3-morse-simulator (<= 1.4-3), python3-motor (<= 1.2.3-1.1), python3-murano (<= 1:5.0.0-1), python3-nova (<= 2:17.0.3-12), python3-opcua (<= 0.95.1-1), python3-opengl (<= 3.1.0+dfsg-1), python3-panoramisk (<= 1.0-1), python3-pexpect (<< 4.6.0-1~), python3-protobuf (<= 3.0.0-9.1+b1), python3-protorpc-standalone (<= 0.9.1-3), python3-psycopg2 (<< 2.7.5-2), python3-pyatspi (<= 2.26.0+dfsg-1), python3-pycsw (<< 2.2.0+dfsg-4), python3-pycuda (<= 2017.1.1-2+b1), python3-pylama (<= 7.4.3-1), python3-pysnmp4 (<= 4.4.3-1), python3-rpyc (<= 3.4.4-1), python3-signaller (<= 1.1.0-1), python3-sleekxmpp (<= 1.3.3-3), python3-slixmpp (<< 1.3.0+git20180724-1), python3-tango (<= 9.2.3-1), python3-trollius (<< 2.1~b1-5), python3-tweepy (<= 3.5.0-1), python3-twisted (<< 18.4.0-2), python3-txfixtures (<= 0.2.6-1), python3-ubjson (<= 0.8.5-2), python3-venv (<< 3.6.5-2), python3-websockets (<= 4.0.1-1), python3-ws4py (<= 0.4.2+dfsg1-2), python3-yowsup (<= 2.5.7-3), pyzo (<< 4.4.3-1.1~), salt-common (<= 2017.7.4+dfsg1-1), snakemake (<< 5.2.1-1), visidata (<= 1.0-1), voltron (<= 0.1.4-2), xapers (<< 0.8.2-1.1) Description: Interactive high-level object-oriented language (version 3.7) Python is a high-level, interactive, object-oriented language. Its 3.7 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Package: python3.7-minimal Status: install ok installed Priority: optional Section: python Installed-Size: 9401 Maintainer: Matthias Klose Architecture: arm64 Multi-Arch: allowed Source: python3.7 Version: 3.7.3-2+deb10u7 Depends: libpython3.7-minimal (= 3.7.3-2+deb10u7), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0) Pre-Depends: libc6 (>= 2.28) Recommends: python3.7 Suggests: binfmt-support Conflicts: binfmt-support (<< 1.1.2) Description: Minimal subset of the Python language (version 3.7) This package contains the interpreter and some essential modules. It can be used in the boot process for some basic tasks. See /usr/share/doc/python3.7-minimal/README.Debian for a list of the modules contained in this package. Package: rcconf Status: install ok installed Priority: optional Section: admin Installed-Size: 73 Maintainer: Atsushi KAMOSHIDA Architecture: all Version: 3.2+nmu1 Depends: whiptail | whiptail-provider | dialog, sysv-rc, perl Conflicts: file-rc Description: Debian Runlevel configuration tool This tool configures system services in connection with system runlevels. It turns on/off services using the scripts in /etc/init.d/. Rcconf works with System-V style runlevel configuration. It is a TUI(Text User Interface) frontend to the update-rc.d command. Package: read-edid Status: install ok installed Priority: optional Section: utils Installed-Size: 61 Maintainer: Dariusz Dwornikowski Architecture: arm64 Source: read-edid (3.0.2-1) Version: 3.0.2-1+b1 Depends: libc6 (>= 2.17) Description: hardware information-gathering tool for VESA PnP monitors read-edid consists of two tools: . get-edid uses a VESA VBE 2 interrupt service routine request to read a 128 byte EDID version 1 structure from your graphics card, which retrieves this information from the monitor via the Data Display Channel (DDC). . get-edid uses architecture-specific methods for querying the video hardware (real-mode x86 instructions on i386, Open Firmware device tree parsing on PowerMac) and is therefore only available for i386 and powerpc architectures. . parse-edid parses this data structure and outputs data suitable for inclusion into the XFree86 or X.org configuration file. It is available for any architecture. Homepage: http://www.polypux.org/projects/read-edid/ Package: readline-common Status: install ok installed Priority: important Section: utils Installed-Size: 89 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: readline Version: 7.0-5 Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11) Depends: dpkg (>= 1.15.4) | install-info Suggests: readline-doc Conflicts: libreadline-common, libreadline5 (<< 5.0-11) Description: GNU readline and history libraries, common files The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Package: resolvconf Status: install ok installed Priority: optional Section: net Installed-Size: 191 Maintainer: resolvconf maintainers Architecture: all Version: 1.79 Depends: ifupdown, lsb-base (>= 4.1+Debian3), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~) Breaks: dhcp3-client (<< 4.1.1-P1-15+squeeze1), dnscache-run, sysv-rc (<< 2.88dsf-42) Enhances: dhcpcd, dnsmasq, ifupdown, isc-dhcp-client, libc6, network-manager, nscd, pdnsd, ppp, pump, udhcpc Conffiles: /etc/dhcp/dhclient-enter-hooks.d/resolvconf 586788af39de093b8145ea9d9fc43875 /etc/init.d/resolvconf d7e4f5e1ae8626fbebb92ed5585d1813 /etc/init/resolvconf.conf 355033f68372631d1b72b039347ec3a0 /etc/network/if-down.d/resolvconf 7e3f037a117b52c4169365a95f676262 /etc/network/if-up.d/000resolvconf f544c89d541465f1fea7dbcf71f832c0 /etc/ppp/ip-down.d/000resolvconf e50ecd8f5226bebba46e1eab652a4169 /etc/ppp/ip-up.d/000resolvconf 8cda84dd75e71467394378a6a71edcd6 /etc/resolvconf/interface-order f8b8c98514181b0c55aee4f531765f61 /etc/resolvconf/resolv.conf.d/base d41d8cd98f00b204e9800998ecf8427e /etc/resolvconf/resolv.conf.d/head 5aee5a60350035d958401da5c0432be3 /etc/resolvconf/update.d/libc 1efe6cdf6ed714267c30cb1d09e2cebf Description: name server information handler Resolvconf is a framework for keeping up to date the system's information about name servers. It sets itself up as the intermediary between programs that supply this information (such as ifup and ifdown, DHCP clients, the PPP daemon and local name servers) and programs that use this information (such as DNS caches and resolver libraries). . This package may require some manual configuration. Please read the README file for detailed instructions. Homepage: http://alioth.debian.org/projects/resolvconf/ Package: rfkill Status: install ok installed Priority: optional Section: utils Installed-Size: 134 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: foreign Source: util-linux Version: 2.33.1-0.1+deb10u1 Replaces: bash-completion (<< 1:2.8~) Depends: libc6 (>= 2.17), libsmartcols1 (>= 2.33) Breaks: bash-completion (<< 1:2.8~) Description: tool for enabling and disabling wireless devices rfkill is a simple tool for accessing the Linux rfkill device interface, which is used to enable and disable wireless networking devices, typically WLAN, Bluetooth and mobile broadband. Package: rktoolkit Status: hold ok installed Priority: optional Section: libdevel Installed-Size: 81 Maintainer: Eddie Cai Architecture: arm64 Multi-Arch: same Version: 1.0.0-1 Description: some small tool used in Rockchip SDK Homepage: https://github.com/rockchip-linux/rktoolkit Package: rkwifibt-broadcom-firmware Status: hold ok installed Priority: optional Section: libs Installed-Size: 17660 Maintainer: Caesar Wang Architecture: arm64 Source: rkwifibt Version: 1.0.0-1 Description: include the rkwifibt broadcom firmware for rockchip linux Homepage: https://github.com/rockchip-linux/rkwifibt Package: rkwifibt-dev-tools Status: hold ok installed Priority: optional Section: libdevel Installed-Size: 75 Maintainer: Caesar Wang Architecture: arm64 Source: rkwifibt Version: 1.0.0-1 Description: include the rkwifibt broadcom tools for rockchip linux Homepage: https://github.com/rockchip-linux/rkwifibt Package: rsyslog Status: install ok installed Priority: important Section: admin Installed-Size: 1712 Maintainer: Michael Biebl Architecture: arm64 Version: 8.1901.0-1+deb10u2 Provides: linux-kernel-log-daemon, system-log-daemon Depends: libc6 (>= 2.27), libestr0 (>= 0.1.4), libfastjson4 (>= 0.99.7), liblognorm5 (>= 2.0.3), libsystemd0 (>= 209), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4), lsb-base (>= 3.2-14) Pre-Depends: init-system-helpers (>= 1.54~) Recommends: logrotate Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-mongodb, rsyslog-doc, rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp Conflicts: linux-kernel-log-daemon, system-log-daemon Conffiles: /etc/default/rsyslog c7af23c348917e877399baea1849727a /etc/init.d/rsyslog bd41a0654a192d74dfb9c551b06fa855 /etc/logcheck/ignore.d.server/rsyslog 650507df599fbbdd6cb4142bd77fd2ff /etc/logrotate.d/rsyslog 8159203bf98416c898849057f585e31f /etc/rsyslog.conf 368844ce10aedc97b5ec13d3f316d621 Description: reliable system and kernel logging daemon Rsyslog is a multi-threaded implementation of syslogd (a system utility providing support for message logging), with features that include: * reliable syslog over TCP, SSL/TLS and RELP * on-demand disk buffering * email alerting * writing to MySQL or PostgreSQL databases (via separate output plugins) * permitted sender lists * filtering on any part of the syslog message * on-the-wire message compression * fine-grained output format control * failover to backup destinations * enterprise-class encrypted syslog relaying . It is the default syslogd on Debian systems. Homepage: http://www.rsyslog.com/ Package: sed Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 875 Maintainer: Clint Adams Architecture: arm64 Multi-Arch: foreign Version: 4.7-1 Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32) Description: GNU stream editor for filtering/transforming text sed reads the specified files or the standard input if no files are specified, makes editing changes according to a list of commands, and writes the results to the standard output. Homepage: https://www.gnu.org/software/sed/ Package: sensible-utils Status: install ok installed Priority: required Section: utils Installed-Size: 62 Maintainer: Anibal Monsalve Salazar Architecture: all Multi-Arch: foreign Version: 0.0.12 Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~) Description: Utilities for sensible alternative selection This package provides a number of small utilities which are used by programs to sensibly select and spawn an appropriate browser, editor, or pager. . The specific utilities included are: sensible-browser sensible-editor sensible-pager Package: shared-mime-info Status: install ok installed Priority: optional Section: misc Installed-Size: 4827 Maintainer: Debian freedesktop.org maintainers Architecture: arm64 Multi-Arch: foreign Version: 1.10-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.35.9), libxml2 (>= 2.7.4) Description: FreeDesktop.org shared MIME database and spec This is the shared MIME-info database from the X Desktop Group. It is required by any program complying to the Shared MIME-Info Database spec, which is also included in this package. . At this time at least ROX, GNOME, KDE and Xfce use this database. Homepage: https://freedesktop.org/wiki/Software/shared-mime-info Package: sound-theme-freedesktop Status: install ok installed Priority: optional Section: sound Installed-Size: 536 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Version: 0.8-2 Description: freedesktop.org sound theme The default freedesktop.org sound theme following the XDG theming specification. It contains a full set of sounds for different desktop events. . These sounds come from various sources: KDE, Ekiga, Pidgin/Purple, ALSA. Homepage: https://www.freedesktop.org/wiki/Specifications/sound-theme-spec/ Package: ssh-import-id Status: install ok installed Priority: optional Section: misc Installed-Size: 57 Maintainer: Andrew Starr-Bochicchio Architecture: all Version: 5.7-1 Depends: ca-certificates, openssh-client, python3-requests (>= 1.1.0), wget, python3:any (>= 3.3.2-2~) Recommends: openssh-server Conffiles: /etc/ssh/ssh_import_id f92d9edbab801eed9d6b464975da229f Description: securely retrieve an SSH public key and install it locally This utility will securely contact a public keyserver (Launchpad.net by default, but Github.com is also supported), retrieve one or more user's public keys, and append these to the current user's ~/.ssh/authorized_keys file. Homepage: http://launchpad.net/ssh-import-id Package: startpar Status: install ok installed Priority: optional Section: admin Installed-Size: 54 Maintainer: Debian sysvinit maintainers Architecture: arm64 Multi-Arch: foreign Version: 0.61-1 Replaces: sysvinit-utils (<< 2.88dsf-52) Depends: libc6 (>= 2.17) Suggests: insserv, sysv-rc Breaks: sysvinit-utils (<< 2.88dsf-52) Description: run processes in parallel and multiplex their output Used by the sysv-rc boot system executor to run init.d scripts in parallel while making sure the script output is not completely messed up. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: strace Status: install ok installed Priority: optional Section: utils Installed-Size: 1739 Maintainer: Steve McIntyre <93sam@debian.org> Architecture: arm64 Version: 4.26-0.2 Depends: libc6 (>= 2.17) Description: System call tracer strace is a system call tracer, i.e. a debugging tool which prints out a trace of all the system calls made by a another process/program. The program to be traced need not be recompiled for this, so you can use it on binaries for which you don't have source. . System calls and signals are events that happen at the user/kernel interface. A close examination of this boundary is very useful for bug isolation, sanity checking and attempting to capture race conditions. Homepage: https://strace.io Package: stress Status: install ok installed Priority: optional Section: devel Installed-Size: 57 Maintainer: Joao Eriberto Mota Filho Architecture: arm64 Version: 1.0.4-4 Depends: libc6 (>= 2.17) Description: tool to impose load on and stress test a computer system 'stress' is a tool that imposes a configurable amount of CPU, memory, I/O, or disk stress on a POSIX-compliant operating system and reports any errors it detects. . 'stress' is not a benchmark. It is a tool used by system administrators to evaluate how well their systems will scale, by kernel programmers to evaluate perceived performance characteristics, and by systems programmers to expose the classes of bugs which only or more frequently manifest themselves when the system is under heavy load. Homepage: http://people.seas.harvard.edu/~apw/stress Package: strongswan-charon Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 218 Maintainer: strongSwan Maintainers Architecture: arm64 Source: strongswan Version: 5.7.2-1+deb10u2 Config-Version: 5.7.2-1+deb10u2 Provides: ike-server Depends: iproute2 | iproute, libstrongswan (= 5.7.2-1+deb10u2), strongswan-starter, libc6 (>= 2.17), strongswan-libcharon Pre-Depends: debconf | debconf-2.0 Conffiles: /etc/apparmor.d/usr.lib.ipsec.charon 59f2be252f7f813307931659760aeb57 /etc/strongswan.d/charon-logging.conf 7578e16d52f0741c2ce30e658934e671 /etc/strongswan.d/charon.conf 45ee937544e9d440c78760f87fe2f180 Description: strongSwan Internet Key Exchange daemon The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . charon is an IPsec IKEv2 daemon which can act as an initiator or a responder. It is written from scratch using a fully multi-threaded design and a modular architecture. Various plugins can provide additional functionality. Homepage: http://www.strongswan.org Package: strongswan-libcharon Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 906 Maintainer: strongSwan Maintainers Architecture: arm64 Source: strongswan Version: 5.7.2-1+deb10u2 Config-Version: 5.7.2-1+deb10u2 Replaces: strongswan-starter (<= 5.6.1-2) Depends: libstrongswan (= 5.7.2-1+deb10u2), libc6 (>= 2.17) Suggests: libcharon-extra-plugins Breaks: strongswan-starter (<= 5.6.1-2) Conffiles: /etc/strongswan.d/charon/bypass-lan.conf 2984470c3c18761a26503c3b633879d5 /etc/strongswan.d/charon/counters.conf 8416145f4be2b32458fa057eac046af2 /etc/strongswan.d/charon/socket-default.conf 6cdc2ca073e24f6e6f7d1c081b2d53e2 /etc/strongswan.d/charon/updown.conf 241b5341a5537b0864c7f2027d38f37d Description: strongSwan charon library The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon library, used by IKE client like strongswan-charon, strongswan-charon-cmd or strongswan-nm as well as standard plugins: - socket-default - counters - bypass-lan (disabled by default) Homepage: http://www.strongswan.org Package: strongswan-nm Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 200 Maintainer: strongSwan Maintainers Architecture: arm64 Source: strongswan Version: 5.7.2-1+deb10u2 Config-Version: 5.7.2-1+deb10u2 Replaces: network-manager-strongswan (<= 1.4.1-1~) Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.37.3), libnm0 (>= 1.1.90), libstrongswan, strongswan-libcharon Recommends: network-manager-strongswan Conffiles: /etc/dbus-1/system.d/nm-strongswan-service.conf 94b3f16691d4a1ba83b53640f16ac719 Description: strongSwan plugin to interact with NetworkManager The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This plugin provides an interface which allows NetworkManager to configure and control the IKEv2 daemon directly through D-Bus. It is designed to work in conjunction with the network-manager-strongswan package, providing a simple graphical frontend to configure IPsec based VPNs. Homepage: http://www.strongswan.org Package: strongswan-starter Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 613 Maintainer: strongSwan Maintainers Architecture: arm64 Source: strongswan Version: 5.7.2-1+deb10u2 Config-Version: 5.7.2-1+deb10u2 Depends: adduser, libstrongswan (= 5.7.2-1+deb10u2), lsb-base (>= 3.0-6), debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.27) Recommends: strongswan-charon Conflicts: openswan Conffiles: /etc/apparmor.d/usr.lib.ipsec.stroke bfb70b300ba9cdeab871e5c3beda306f /etc/init.d/ipsec a7b2d9de5749ee0bebcd6ac3f9fee732 /etc/ipsec.conf c15a64a3c116b212f7a0395530d3b95e /etc/ipsec.secrets f73bca407f012ac0b1d084b9bdbc75d2 /etc/strongswan.d/charon/stroke.conf effb1b5bc46a7c849754fada75bae0d2 /etc/strongswan.d/starter.conf 2ba2784c18e268e34cec179d90e38437 Description: strongSwan daemon starter and configuration file parser The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . The starter and the associated "ipsec" script control the charon daemon from the command line. It parses ipsec.conf and loads the configurations to the daemon. Homepage: http://www.strongswan.org Package: sudo Status: install ok installed Priority: optional Section: admin Installed-Size: 3720 Maintainer: Bdale Garbee Architecture: arm64 Version: 1.8.27-1+deb10u6 Replaces: sudo-ldap Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.27), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libpam-modules, lsb-base Conflicts: sudo-ldap Conffiles: /etc/init.d/sudo 1153f6e6fa7c0e2166779df6ad43f1a8 /etc/pam.d/sudo 85da64f888739f193fc0fa896680030e /etc/sudoers 45437b4e86fba2ab890ac81db2ec3606 /etc/sudoers.d/README 8d3cf36d1713f40a0ddc38e1b21a51b6 Description: Provide limited super user privileges to specific users Sudo is a program designed to allow a sysadmin to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow people to get their work done. . This version is built with minimal shared library dependencies, use the sudo-ldap package instead if you need LDAP support for sudoers. Homepage: http://www.sudo.ws/ Package: synaptic Status: deinstall ok config-files Priority: optional Section: admin Installed-Size: 7751 Maintainer: Michael Vogt Architecture: arm64 Version: 0.84.6 Config-Version: 0.84.6 Depends: libapt-inst2.0 (>= 0.8.16~exp12), libapt-pkg5.0 (>= 1.1~exp9), libatk1.0-0 (>= 1.12.4), libc6 (>= 2.17), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libept1.5.0, libgcc1 (>= 1:3.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.16.0), libgnutls30 (>= 3.6.5), libgtk-3-0 (>= 3.11.7), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpcre2-8-0 (>= 10.32), libstdc++6 (>= 5.2), libvte-2.91-0, libx11-6, libxapian30 (>= 1.4.11~), zlib1g (>= 1:1.1.4), hicolor-icon-theme, policykit-1, zenity Recommends: libgtk2-perl (>= 1:1.130), xdg-utils Suggests: dwww, menu, deborphan, apt-xapian-index, tasksel, software-properties-gtk Conflicts: menu (<< 2.1.11) Description: Graphical package manager Synaptic is a graphical package management tool based on GTK+ and APT. Synaptic enables you to install, upgrade and remove software packages in a user friendly way. . Besides these basic functions the following features are provided: * Search and filter the list of available packages * Perform smart system upgrades * Fix broken package dependencies * Edit the list of used repositories (sources.list) * Download the latest changelog of a package * Configure packages through the debconf system * Browse all available documentation related to a package (dwww is required) Homepage: http://www.nongnu.org/synaptic/ Package: system-tools-backends Status: install ok installed Priority: optional Section: admin Installed-Size: 799 Maintainer: Andriy Grytsenko Architecture: arm64 Source: system-tools-backends (2.10.2-3) Version: 2.10.2-3+b1 Replaces: gnome-system-tools (<< 1.1) Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (>= 0.94), libnet-dbus-perl, dbus (>= 1.1.2) Breaks: gnome-system-tools (<< 2.30), liboobs-1-4 (<< 2.30) Conflicts: liboobs-1-3 Conffiles: /etc/dbus-1/system.d/org.freedesktop.SystemToolsBackends.conf 787f9c5e107fa8e1c178ce8439940e50 Description: System Tools to manage computer configuration -- scripts The System Tools Backends are a set of cross-platform scripts for Linux and other Unix systems. The backends provide a standard XML interface for modifying the configuration regardless of the distribution that's being used. . These backends are used in GNOME System Tools. Homepage: http://system-tools-backends.freedesktop.org/ Package: systemd Status: install ok installed Priority: important Section: admin Installed-Size: 13036 Maintainer: Debian systemd Maintainers Architecture: arm64 Multi-Arch: foreign Version: 241-7~deb10u10 Replaces: udev (<< 228-5) Depends: libacl1 (>= 2.2.23), libapparmor1 (>= 2.9.0-3+exp2), libaudit1 (>= 1:2.2.1), libcap2 (>= 1:2.10), libcryptsetup12 (>= 2:1.6.0), libgnutls30 (>= 3.6.6), libgpg-error0 (>= 1.14), libidn11 (>= 1.13), libip4tc0 (>= 1.6.0+snapshot20161117), libkmod2 (>= 5~), liblz4-1 (>= 0.0~r130), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.3.1), libsystemd0 (= 241-7~deb10u10), util-linux (>= 2.27.1), mount (>= 2.26), adduser Pre-Depends: libblkid1 (>= 2.24), libc6 (>= 2.28), libgcrypt20 (>= 1.8.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.1.9) Recommends: libpam-systemd, dbus Suggests: systemd-container, policykit-1 Breaks: apparmor (<< 2.9.2-1), ifupdown (<< 0.8.5~), laptop-mode-tools (<< 1.68~), python-dbusmock (<< 0.18), python3-dbusmock (<< 0.18), systemd-shim (<< 10-4~), udev (<< 228-5) Conflicts: consolekit, libpam-ck-connector Conffiles: /etc/dhcp/dhclient-exit-hooks.d/timesyncd a891f21f45b0648b7082d999bf424591 /etc/pam.d/systemd-user 3d97692a0125712fcfbd7ddf756f7696 /etc/systemd/journald.conf f571f0e823d646d7066ddcb32763d674 /etc/systemd/logind.conf 65afdb550557d875b792b89a67c46016 /etc/systemd/networkd.conf 1e94f91b9f6cc257b8fca08f89b2e8b1 /etc/systemd/resolved.conf 0006d0a53b438ce722b06c1bb05c9cae /etc/systemd/sleep.conf e912ff7c0833daa5a45d3918b3d6585f /etc/systemd/system.conf dbb1fe615344ea000823b6fa70069480 /etc/systemd/timesyncd.conf e563c788b019216ec2ad3a43bf89e315 /etc/systemd/user.conf 675370e2d80a4ad957202e68c1b4aaee Description: system and service manager systemd is a system and service manager for Linux. It provides aggressive parallelization capabilities, uses socket and D-Bus activation for starting services, offers on-demand starting of daemons, keeps track of processes using Linux control groups, maintains mount and automount points and implements an elaborate transactional dependency-based service control logic. . systemd is compatible with SysV and LSB init scripts and can work as a drop-in replacement for sysvinit. . Installing the systemd package will not switch your init system unless you boot with init=/bin/systemd or install systemd-sysv in addition. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: systemd-sysv Status: install ok installed Priority: important Section: admin Installed-Size: 125 Maintainer: Debian systemd Maintainers Architecture: arm64 Multi-Arch: foreign Source: systemd Version: 241-7~deb10u10 Replaces: sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv Pre-Depends: systemd Recommends: libnss-systemd Conflicts: file-rc, openrc (<< 0.20.4-2.1), systemd-shim, sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv Description: system and service manager - SysV links systemd is a system and service manager for Linux. It provides aggressive parallelization capabilities, uses socket and D-Bus activation for starting services, offers on-demand starting of daemons, keeps track of processes using Linux control groups, maintains mount and automount points and implements an elaborate transactional dependency-based service control logic. . systemd is compatible with SysV and LSB init scripts and can work as a drop-in replacement for sysvinit. . This package provides the manual pages and links needed for systemd to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a link to systemd. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: sysv-rc Status: install ok installed Priority: optional Section: admin Installed-Size: 121 Maintainer: Debian sysvinit maintainers Architecture: all Multi-Arch: foreign Source: sysvinit Version: 2.93-8 Depends: insserv (>> 1.12.0-10), startpar, sysvinit-utils (>= 2.86.ds1-62) Pre-Depends: init-system-helpers (>= 1.25~) Recommends: lsb-base (>= 3.2-14) Breaks: systemd (<< 215) Description: System-V-like runlevel change mechanism This package provides support for the System-V like system for booting, changing runlevels, and shutting down, configured through symbolic links in /etc/rc?.d/. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: sysvinit-utils Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 119 Maintainer: Debian sysvinit maintainers Architecture: arm64 Multi-Arch: foreign Source: sysvinit Version: 2.93-8 Replaces: initscripts (<< 2.88dsf-59.5) Depends: init-system-helpers (>= 1.25~), util-linux (>> 2.28-2~), libc6 (>= 2.17) Breaks: systemd (<< 215) Description: System-V-like utilities This package contains the important System-V-like utilities. . Specifically, this package includes: killall5, pidof Homepage: http://savannah.nongnu.org/projects/sysvinit Package: tar Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 2887 Maintainer: Bdale Garbee Architecture: arm64 Multi-Arch: foreign Version: 1.30+dfsg-6+deb10u1 Replaces: cpio (<< 2.4.2-39) Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.17), libselinux1 (>= 1.32) Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc Breaks: dpkg-dev (<< 1.14.26) Conflicts: cpio (<= 2.4.2-38) Description: GNU version of the tar archiving utility Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like PKZIP in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. Homepage: https://www.gnu.org/software/tar/ Package: tcpdump Status: install ok installed Priority: optional Section: net Installed-Size: 1129 Maintainer: Romain Francoise Architecture: arm64 Multi-Arch: foreign Version: 4.9.3-1~deb10u2 Replaces: apparmor-profiles-extra (<< 1.12~) Depends: libc6 (>= 2.17), libpcap0.8 (>= 1.5.1), libssl1.1 (>= 1.1.0) Suggests: apparmor (>= 2.3) Breaks: apparmor-profiles-extra (<< 1.12~) Conffiles: /etc/apparmor.d/usr.sbin.tcpdump 5a035d8c496c7891c76882d2be28ff7f Description: command-line network traffic analyzer This program allows you to dump the traffic on a network. tcpdump is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet types. . It can be used to print out the headers of packets on a network interface, filter packets that match a certain expression. You can use this tool to track down network problems, to detect attacks or to monitor network activities. Homepage: http://www.tcpdump.org/ Package: tracker Status: deinstall ok config-files Priority: optional Section: utils Installed-Size: 3367 Maintainer: Debian GNOME Maintainers Architecture: arm64 Version: 2.1.8-2 Config-Version: 2.1.8-2 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.45.3), libtracker-control-2.0-0 (= 2.1.8-2), libtracker-sparql-2.0-0 (= 2.1.8-2), dconf-gsettings-backend | gsettings-backend, shared-mime-info, libglib2.0-bin, default-dbus-session-bus | dbus-session-bus Recommends: tracker-miner-fs Conffiles: /etc/xdg/autostart/tracker-store.desktop d2984be643bfdfcc1ff05ba7f867381f Description: metadata database, indexer and search tool Tracker is an advanced framework for first class objects with associated metadata and tags. It provides a one stop solution for all metadata, tags, shared object databases, search tools and indexing. Homepage: https://wiki.gnome.org/Projects/Tracker Package: triggerhappy Status: install ok installed Priority: extra Section: utils Installed-Size: 120 Maintainer: Stefan Tomanek Architecture: arm64 Version: 0.5.0-1 Depends: libc6 (>= 2.17), libsystemd0, init-system-helpers (>= 1.18~) Conffiles: /etc/default/triggerhappy 021ad4378a11641f5207cdb82005926b /etc/init.d/triggerhappy 94f46d34da47cd2d80ff9b558984e116 Description: global hotkey daemon for Linux Triggerhappy watches connected input devices for certain key presses or other input events and runs administrator-configured commands when they occur. Unlike other hotkey daemons, it runs as a persistent, systemwide service and therefore can be used even outside the context of a user or X11 session. . It can handle a wide variety of devices (keyboards, joysticks, wiimote, etc.), as long as they are presented by the kernel as generic input devices. No kernel patch is required. The daemon is a userspace program that polls the /dev/input/event? interfaces for incoming key, button and switch events. A single daemon can monitor multiple input devices and can dynamically add additional ones. Hotkey handlers can be assigned to dedicated (tagged) devices or globally. . For example, this package might be useful on a headless system to use input events generated by a remote control to control an mpd server, but can also be used to allow the adjustment of audio and network status on a notebook without relying on user specific configuration. . Key combinations are supported as well as the hotplugging of devices using a udev hotplug script; the running daemon can also be influenced by a client program, e.g. to temporarily pause the processing of events or switch to a different set of hotkey bindings. Homepage: https://github.com/wertarbyte/triggerhappy Package: tzdata Status: install ok installed Priority: required Section: localization Installed-Size: 3361 Maintainer: GNU Libc Maintainers Architecture: all Multi-Arch: foreign Version: 2024a-0+deb10u1 Replaces: libc0.1, libc0.3, libc6, libc6.1 Provides: tzdata-buster Depends: debconf (>= 0.5) | debconf-2.0 Description: time zone and daylight-saving time data This package contains data required for the implementation of standard local time for many representative locations around the globe. It is updated periodically to reflect changes made by political bodies to time zone boundaries, UTC offsets, and daylight-saving rules. Homepage: https://www.iana.org/time-zones Package: ucf Status: install ok installed Priority: standard Section: utils Installed-Size: 188 Maintainer: Manoj Srivastava Architecture: all Multi-Arch: foreign Version: 3.0038+nmu1 Depends: debconf (>= 1.5.19), coreutils (>= 5.91), sensible-utils Conffiles: /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e Description: Update Configuration File(s): preserve user changes to config files Debian policy mandates that user changes to configuration files must be preserved during package upgrades. The easy way to achieve this behavior is to make the configuration file a 'conffile', in which case dpkg handles the file specially during upgrades, prompting the user as needed. . This is appropriate only if it is possible to distribute a default version that will work for most installations, although some system administrators may choose to modify it. This implies that the default version will be part of the package distribution, and must not be modified by the maintainer scripts during installation (or at any other time). . This script attempts to provide conffile-like handling for files that may not be labelled conffiles, and are not shipped in a Debian package, but handled by the postinst instead. This script allows one to maintain files in /etc, preserving user changes and in general offering the same facilities while upgrading that dpkg normally provides for 'conffiles'. . Additionally, this script provides facilities for transitioning a file that had not been provided with conffile-like protection to come under this schema, and attempts to minimize questions asked at installation time. Indeed, the transitioning facility is better than the one offered by dpkg while transitioning a file from a non-conffile to conffile status. Package: udev Status: install ok installed Priority: important Section: admin Installed-Size: 8208 Maintainer: Debian systemd Maintainers Architecture: arm64 Multi-Arch: foreign Source: systemd Version: 241-7~deb10u10 Replaces: systemd (<< 233-4) Depends: libacl1 (>= 2.2.23), libblkid1 (>= 2.24), libc6 (>= 2.28), libkmod2 (>= 5~), libselinux1 (>= 2.1.9), adduser, dpkg (>= 1.19.3) | systemd-sysv, libudev1 (= 241-7~deb10u10), lsb-base (>= 3.0-6), util-linux (>= 2.27.1) Breaks: ifplugd (<< 0.28-19.1~), ifupdown (<< 0.8.5~), joystick (<< 1:1.4.9-1~), systemd (<< 233-4) Conflicts: hal Conffiles: /etc/init.d/udev dac6ea9ad4b87245daebca0f49d19bd3 /etc/udev/udev.conf 742cd39fa3640a4352f8abae4aabc3d1 Description: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: udisks2 Status: deinstall ok config-files Priority: optional Section: admin Installed-Size: 2345 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: foreign Version: 2.8.1-4 Config-Version: 2.8.1-4 Depends: dbus, libblockdev-part2, libblockdev-swap2, libblockdev-loop2, libblockdev-fs2, libpam-systemd, parted, udev, libacl1 (>= 2.2.23), libatasmart4 (>= 0.13), libblockdev-utils2 (>= 2.20), libblockdev2 (>= 2.20), libc6 (>= 2.17), libglib2.0-0 (>= 2.50), libgudev-1.0-0 (>= 165), libmount1 (>= 2.30), libpolkit-agent-1-0 (>= 0.99), libpolkit-gobject-1-0 (>= 0.101), libsystemd0 (>= 209), libudisks2-0 (>= 2.8.1) Recommends: exfat-utils, dosfstools, e2fsprogs, eject, libblockdev-crypto2, ntfs-3g, policykit-1 Suggests: btrfs-progs, f2fs-tools, mdadm, libblockdev-mdraid2, nilfs-tools, reiserfsprogs, xfsprogs, udftools, udisks2-bcache, udisks2-btrfs, udisks2-lvm2, udisks2-vdo, udisks2-zram Conffiles: /etc/udisks2/udisks2.conf cdca35d6490b9ff83f095070039ec117 Description: D-Bus service to access and manipulate storage devices The udisks daemon serves as an interface to system block devices, implemented via D-Bus. It handles operations such as querying, mounting, unmounting, formatting, or detaching storage devices such as hard disks or USB thumb drives. . This package also provides the udisksctl utility, which can be used to trigger these operations from the command line (if permitted by PolicyKit). . Creating or modifying file systems such as XFS, RAID, or LUKS encryption requires that the corresponding mkfs.* and admin tools are installed, such as dosfstools for VFAT, xfsprogs for XFS, or cryptsetup for LUKS. Homepage: https://www.freedesktop.org/wiki/Software/udisks Package: unzip Status: install ok installed Priority: optional Section: utils Installed-Size: 539 Maintainer: Santiago Vila Architecture: arm64 Multi-Arch: foreign Version: 6.0-23+deb10u3 Depends: libbz2-1.0, libc6 (>= 2.17) Suggests: zip Description: De-archiver for .zip files InfoZIP's unzip program. With the exception of multi-volume archives (ie, .ZIP files that are split across several disks using PKZIP's /& option), this can handle any file produced either by PKZIP, or the corresponding InfoZIP zip program. . This version supports encryption. Homepage: http://www.info-zip.org/UnZip.html Package: upower Status: install ok installed Priority: optional Section: admin Installed-Size: 404 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: foreign Version: 0.99.10-1 Depends: dbus, udev, libc6 (>= 2.17), libglib2.0-0 (>= 2.41.1), libgudev-1.0-0 (>= 147), libimobiledevice6 (>= 0.9.7), libplist3 (>= 1.11), libupower-glib3 (>= 0.99.8), libusb-1.0-0 (>= 2:1.0.8) Recommends: policykit-1 Conffiles: /etc/UPower/UPower.conf eb556142a81614d894e56f38524a4f62 Description: abstraction for power management upower provides an interface to enumerate power sources on the system and control system-wide power management. Any application can access the org.freedesktop.UPower service on the system message bus. Some operations (such as suspending the system) are restricted using PolicyKit. Homepage: https://upower.freedesktop.org/ Package: usb-modeswitch Status: install ok installed Priority: optional Section: comm Installed-Size: 145 Maintainer: Didier Raboud Architecture: arm64 Version: 2.5.2+repack0-2 Depends: libc6 (>= 2.17), libjim0.77 (>= 0.72), libusb-1.0-0 (>= 2:1.0.9), usb-modeswitch-data (>= 20140529) Suggests: comgt, wvdial Breaks: usb-modeswitch-data (<< 20100127) Conffiles: /etc/usb_modeswitch.conf b7f857804762b4a81a71c93a2fe1207f Description: mode switching tool for controlling "flip flop" USB devices Several new USB devices have their proprietary Windows drivers onboard, especially WAN dongles. When plugged in for the first time, they act like a flash storage and start installing the driver from there. If the driver is already installed, the storage device vanishes and a new device, such as an USB modem, shows up. This is called the "ZeroCD" feature. . On Debian, this is not needed, since the driver is included as a Linux kernel module, such as "usbserial". However, the device still shows up as "usb-storage" by default. usb-modeswitch solves that issue by sending the command which actually performs the switching of the device from "usb-storage" to "usbserial". . This package contains the binaries and the brother scripts. Homepage: http://www.draisberghof.de/usb_modeswitch/ Package: usb-modeswitch-data Status: install ok installed Priority: optional Section: comm Installed-Size: 101 Maintainer: Didier Raboud Architecture: all Version: 20170806-2 Replaces: usb-modeswitch-data-packed Provides: usb-modeswitch-data-packed Recommends: usb-modeswitch (>= 2.4.0), udev Breaks: usb-modeswitch (<< 2.4.0) Conflicts: usb-modeswitch-data-packed Description: mode switching data for usb-modeswitch Several new USB devices have their proprietary Windows drivers onboard, especially WAN dongles. When plugged in for the first time, they act like a flash storage and start installing the driver from there. If the driver is already installed, the storage device vanishes and a new device, such as an USB modem, shows up. This is called the "ZeroCD" feature. . On Debian, this is not needed, since the driver is included as a Linux kernel module, such as "usbserial". However, the device still shows up as "usb-storage" by default. usb-modeswitch solves that issue by sending the command which actually performs the switching of the device from "usb-storage" to "usbserial". . This package contains the commands data needed for usb-modeswitch. Homepage: http://www.draisberghof.de/usb_modeswitch/ Package: usb.ids Status: install ok installed Priority: optional Section: admin Installed-Size: 612 Maintainer: Aurelien Jarno Architecture: all Multi-Arch: foreign Version: 2019.07.27-0+deb10u1 Replaces: usbutils (<< 1:008-1) Breaks: usbutils (<< 1:008-1) Description: USB ID Repository This package contains the usb.ids file, a public repository of all known ID's used in USB devices: ID's of vendors, devices, subsystems and device classes. It is used in various programs to display full human-readable names instead of cryptic numeric codes. Homepage: http://www.linux-usb.org/usb-ids.html Package: usbutils Status: install ok installed Priority: optional Section: utils Installed-Size: 304 Maintainer: Aurelien Jarno Architecture: arm64 Multi-Arch: foreign Version: 1:010-3 Depends: libc6 (>= 2.17), libudev1 (>= 196), libusb-1.0-0 (>= 2:1.0.16), usb.ids Description: Linux USB utilities This package contains the lsusb utility for inspecting the devices connected to the USB bus. It shows a graphical representation of the devices that are currently plugged in, showing the topology of the USB bus. It also displays information on each individual device on the bus. Homepage: https://github.com/gregkh/usbutils Package: user-setup Status: install ok installed Priority: optional Section: admin Installed-Size: 458 Maintainer: Debian Install System Team Architecture: all Version: 1.81 Depends: debconf (>= 0.5) | debconf-2.0, passwd, adduser Description: Set up initial user and password This package creates an initial user, using the same code as is responsible for creating the initial user in the installer. It is only likely to be of any use if your system has no non-system users at all. Package: util-linux Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 4102 Maintainer: LaMont Jones Architecture: arm64 Multi-Arch: foreign Version: 2.33.1-0.1+deb10u1 Replaces: bash-completion (<< 1:2.8), initscripts (<< 2.88dsf-59.2~), login (<< 1:4.5-1.1~), mount (<< 2.29.2-3~), s390-tools (<< 2.2.0-1~), setpriv (<< 2.32.1-0.2~), sysvinit-utils (<< 2.88dsf-59.1~) Depends: fdisk, login (>= 1:4.5-1.1~) Pre-Depends: libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.31.1), libc6 (>= 2.25), libcap-ng0 (>= 0.7.9), libmount1 (>= 2.25), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.33), libsystemd0, libtinfo6 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Suggests: dosfstools, kbd | console-tools, util-linux-locales Breaks: bash-completion (<< 1:2.8), grml-debootstrap (<< 0.68), mount (<< 2.29.2-3~), s390-tools (<< 2.2.0-1~), setpriv (<< 2.32.1-0.2~), sysvinit-utils (<< 2.88dsf-59.4~) Conffiles: /etc/default/hwclock 3916544450533eca69131f894db0ca12 /etc/init.d/hwclock.sh 1ca5c0743fa797ffa364db95bb8d8d8e /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a /etc/pam.d/su-l 756fef5687fecc0d986e5951427b0c4f Description: miscellaneous system utilities This package contains a number of important utilities, most of which are oriented towards maintenance of your system. Some of the more important utilities included in this package allow you to view kernel messages, create new filesystems, view block device information, interface with real time clock, etc. Package: v4l-utils Status: hold ok installed Priority: optional Section: utils Installed-Size: 1701 Maintainer: Gregor Jasny Architecture: arm64 Version: 1.16.3-3 Replaces: ivtv-utils (<< 1.4.1-2), media-ctl Depends: libv4l-0 (= 1.16.3-3), libv4l2rds0 (= 1.16.3-3), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), libudev1 (>= 183), libv4lconvert0 (>= 0.5.0) Breaks: ivtv-utils (<< 1.4.1-2), media-ctl Description: Collection of command line video4linux utilities v4l-utils contains the following video4linux command line utilities: . decode_tm6000: decodes tm6000 proprietary format streams rds-ctl: tool to receive and decode Radio Data System (RDS) streams v4l2-compliance: tool to test v4l2 API compliance of drivers v4l2-ctl, cx18-ctl, ivtv-ctl: tools to control v4l2 controls from the cmdline v4l2-dbg: tool to directly get and set registers of v4l2 devices v4l2-sysfs-path: sysfs helper tool Homepage: https://linuxtv.org/downloads/v4l-utils/ Package: vim Status: install ok installed Priority: optional Section: editors Installed-Size: 2887 Maintainer: Debian Vim Maintainers Architecture: arm64 Version: 2:8.1.0875-5+deb10u6 Provides: editor Depends: vim-common (= 2:8.1.0875-5+deb10u6), vim-runtime (= 2:8.1.0875-5+deb10u6), libacl1 (>= 2.2.23), libc6 (>= 2.17), libgpm2 (>= 1.20.7), libselinux1 (>= 1.32), libtinfo6 (>= 6) Suggests: ctags, vim-doc, vim-scripts Description: Vi IMproved - enhanced vi editor Vim is an almost compatible version of the UNIX editor Vi. . Many new features have been added: multi level undo, syntax highlighting, command line history, on-line help, filename completion, block operations, folding, Unicode support, etc. . This package contains a version of vim compiled with a rather standard set of features. This package does not provide a GUI version of Vim. See the other vim-* packages if you need more (or less). Homepage: https://www.vim.org/ Package: vim-common Status: install ok installed Priority: important Section: editors Installed-Size: 335 Maintainer: Debian Vim Maintainers Architecture: all Multi-Arch: foreign Source: vim Version: 2:8.1.0875-5+deb10u6 Depends: xxd Recommends: vim | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny Conffiles: /etc/vim/vimrc f24e66036f0802ed65c21cde317548a0 Description: Vi IMproved - Common files Vim is an almost compatible version of the UNIX editor Vi. . This package contains files shared by all non GUI-enabled vim variants available in Debian. Examples of such shared files are: manpages and configuration files. Homepage: https://www.vim.org/ Package: vim-runtime Status: install ok installed Priority: optional Section: editors Installed-Size: 29629 Maintainer: Debian Vim Maintainers Architecture: all Multi-Arch: foreign Source: vim Version: 2:8.1.0875-5+deb10u6 Recommends: vim | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny Breaks: vim-tiny (<< 2:8.1.0875-5+deb10u6) Enhances: vim-tiny Description: Vi IMproved - Runtime files Vim is an almost compatible version of the UNIX editor Vi. . This package contains vimtutor and the architecture independent runtime files, used, if available, by all vim variants available in Debian. Example of such runtime files are: online documentation, rules for language-specific syntax highlighting and indentation, color schemes, and standard plugins. Homepage: https://www.vim.org/ Package: vim-tiny Status: install ok installed Priority: important Section: editors Installed-Size: 1392 Maintainer: Debian Vim Maintainers Architecture: arm64 Source: vim Version: 2:8.1.0875-5+deb10u6 Provides: editor Depends: vim-common (= 2:8.1.0875-5+deb10u6), libacl1 (>= 2.2.23), libc6 (>= 2.17), libselinux1 (>= 1.32), libtinfo6 (>= 6) Suggests: indent Conffiles: /etc/vim/vimrc.tiny edcfb3dbbc5c68b875e3b4ad399f261a Description: Vi IMproved - enhanced vi editor - compact version Vim is an almost compatible version of the UNIX editor Vi. . This package contains a minimal version of Vim compiled with no GUI and a small subset of features. This package's sole purpose is to provide the vi binary for base installations. . If a vim binary is wanted, try one of the following more featureful packages: vim, vim-nox, vim-athena, vim-gtk, or vim-gtk3. Homepage: https://www.vim.org/ Package: vpnc Status: deinstall ok config-files Priority: extra Section: net Installed-Size: 216 Maintainer: Florian Schlichting Architecture: arm64 Version: 0.5.3r550-3 Config-Version: 0.5.3r550-3 Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.7.0), libgnutls30 (>= 3.5.0), perl:any, vpnc-scripts Recommends: iproute2 Suggests: resolvconf Conffiles: /etc/vpnc/default.conf e79bf2129aa0b8f81fcdf9643be0e68c Description: Cisco-compatible VPN client vpnc is a VPN client compatible with cisco3000 VPN Concentrator (also known as Cisco's EasyVPN equipment). vpnc runs entirely in userspace and does not require kernel modules except for the tun driver to communicate with the network layer. . It supports most of the features needed to establish connection to the VPN concentrator: MD5 and SHA1 hashes, 3DES and AES ciphers, PFS and various IKE DH group settings. Homepage: https://www.unix-ag.uni-kl.de/~massar/vpnc/ Package: watchdog Status: install ok installed Priority: extra Section: admin Installed-Size: 258 Maintainer: Michael Meskes Architecture: arm64 Version: 5.15-2 Depends: libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), makedev (>= 2.3.1-24) | udev, lsb-base (>= 3.2-14) Conffiles: /etc/init.d/watchdog 350ab37d9e081970c491adb488c29d17 /etc/init.d/wd_keepalive d2f8e84bd91ffd2c5b5ac07774fb751b /etc/watchdog.conf bb81eaa8fadc4fedd216195dd125a4d4 Description: system health checker and software/hardware watchdog handler The watchdog program writes to /dev/watchdog every ten seconds. If the device is opened but not written to within a minute, the machine will reboot. This feature is available when the kernel is built with "software watchdog" support (standard in Debian kernels) or if the machine is equipped with a hardware watchdog (in which case this package can also be used to "pet" it, resetting its timer). . The kernel software watchdog's ability to reboot will depend on the state of the machine and interrupts. . The watchdog tool itself runs several health checks and acts appropriately if the system is not in good shape. Homepage: http://watchdog.sourceforge.net Package: wget Status: install ok installed Priority: standard Section: web Installed-Size: 3249 Maintainer: Noël Köthe Architecture: arm64 Multi-Arch: foreign Version: 1.20.1-1.1 Depends: libc6 (>= 2.28), libgnutls30 (>= 3.6.6), libidn2-0 (>= 0.6), libnettle6, libpcre2-8-0 (>= 10.32), libpsl5 (>= 0.16.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Recommends: ca-certificates Conflicts: wget-ssl Conffiles: /etc/wgetrc c43064699caf6109f4b3da0405c06ebb Description: retrieves files from the web Wget is a network utility to retrieve files from the web using HTTP(S) and FTP, the two most widely used internet protocols. It works non-interactively, so it will work in the background, after having logged off. The program supports recursive retrieval of web-authoring pages as well as FTP sites -- you can use Wget to make mirrors of archives and home pages or to travel the web like a WWW robot. . Wget works particularly well with slow or unstable connections by continuing to retrieve a document until the document is fully downloaded. Re-getting files from where it left off works on servers (both HTTP and FTP) that support it. Both HTTP and FTP retrievals can be time stamped, so Wget can see if the remote file has changed since the last retrieval and automatically retrieve the new version if it has. . Wget supports proxy servers; this can lighten the network load, speed up retrieval, and provide access behind firewalls. Homepage: https://www.gnu.org/software/wget/ Package: whiptail Status: install ok installed Priority: optional Section: utils Installed-Size: 70 Maintainer: Alastair McKinstry Architecture: arm64 Multi-Arch: foreign Source: newt Version: 0.52.20-8 Depends: libc6 (>= 2.17), libnewt0.52 (>= 0.52.20), libpopt0 (>= 1.14), libslang2 (>= 2.2.4) Description: Displays user-friendly dialog boxes from shell scripts Whiptail is a "dialog" replacement using newt instead of ncurses. It provides a method of displaying several different types of dialog boxes from shell scripts. This allows a developer of a script to interact with the user in a much friendlier manner. Homepage: https://pagure.io/newt Package: wireless-tools Status: install ok installed Priority: optional Section: net Installed-Size: 281 Maintainer: Guus Sliepen Architecture: arm64 Multi-Arch: foreign Version: 30~pre9-13 Depends: libc6 (>= 2.17), libiw30 (>= 30~pre1) Conffiles: /etc/network/if-post-down.d/wireless-tools 5cc59de6a0f25f32f25298f05625623c /etc/network/if-pre-up.d/wireless-tools ab74bdf4a9503ddd3322890b155c475e Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. Homepage: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html Package: wpasupplicant Status: install ok installed Priority: optional Section: net Installed-Size: 3233 Maintainer: Debian wpasupplicant Maintainers Architecture: arm64 Multi-Arch: foreign Source: wpa Version: 2:2.7+git20190128+0c1e29f-6+deb10u4 Depends: libc6 (>= 2.25), libdbus-1-3 (>= 1.9.14), libnl-3-200 (>= 3.2.21), libnl-genl-3-200 (>= 3.2.7), libnl-route-3-200 (>= 3.4.0), libpcsclite1 (>= 1.0.0), libreadline7 (>= 6.0), libssl1.1 (>= 1.1.0), lsb-base, adduser Suggests: wpagui, libengine-pkcs11-openssl Breaks: initscripts (<< 2.88dsf-13.3) Conffiles: /etc/dbus-1/system.d/wpa_supplicant.conf 8d90aeffce60b60c62d385874c304dc6 /etc/wpa_supplicant/action_wpa.sh 41b2e273d616b1c7e7b605bbe8648d8b /etc/wpa_supplicant/functions.sh 29834d0d67a65585b71e231832884174 /etc/wpa_supplicant/ifupdown.sh 4c82dbf7e1d8c5ddd70e40b9665cfeee Description: client support for WPA and WPA2 (IEEE 802.11i) WPA and WPA2 are methods for securing wireless networks, the former using IEEE 802.1X, and the latter using IEEE 802.11i. This software provides key negotiation with the WPA Authenticator, and controls association with IEEE 802.11i networks. Homepage: http://w1.fi/wpa_supplicant/ Package: x11-common Status: install ok installed Priority: optional Section: x11 Installed-Size: 305 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: xorg Version: 1:7.7+19 Depends: lsb-base (>= 1.3-9ubuntu2) Conffiles: /etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233 /etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f /etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0 /etc/X11/Xsession 8662d290adffe530016ebf825b9af06f /etc/X11/Xsession.d/20x11-common_process-args b3365bc1fd7637dc237eda93533d0fe9 /etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c /etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd /etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040 /etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d /etc/X11/Xsession.d/90x11-common_ssh-agent ae74aadf705c5fccf841ef921b45ca72 /etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168 /etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a /etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1 /etc/init.d/x11-common 4bf46072f9f13b2e38d58a053def37d5 Description: X Window System (X.Org) infrastructure x11-common contains the filesystem infrastructure required for further installation of the X Window System in any configuration; it does not provide a full installation of clients, servers, libraries, and utilities required to run the X Window System. . A number of terms are used to refer to the X Window System, including "X", "X Version 11", "X11", "X11R6", and "X11R7". The version of X used in Debian is derived from the version released by the X.Org Foundation, and is thus often also referred to as "X.Org". All of the preceding quoted terms are functionally interchangeable in an Debian system. Homepage: http://www.x.org/ Package: x11-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 619 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: foreign Version: 7.7+4 Depends: libc6 (>= 2.17), libfontconfig1 (>= 2.12), libfontenc1, libfreetype6 (>= 2.2.1), libgl1, libx11-6, libx11-xcb1, libxaw7, libxcb-shape0, libxcb1 (>= 1.6), libxcomposite1 (>= 1:0.3-1), libxext6, libxft2 (>> 2.1.1), libxi6, libxinerama1, libxmu6, libxmuu1, libxrandr2 (>= 2:1.2.0), libxrender1, libxt6 (>= 1:1.1.0), libxtst6, libxv1, libxxf86dga1, libxxf86vm1 Suggests: mesa-utils Conffiles: /etc/X11/app-defaults/Editres 52c854cc7c64da8bebd2cc12ed598f55 /etc/X11/app-defaults/Editres-color 5ec5d0e8c953faaa06af647650f30ce6 /etc/X11/app-defaults/Viewres 4f77da598593ff07cda9d2d147a07772 /etc/X11/app-defaults/Viewres-color ff9c397a80443790a97b909050f63282 /etc/X11/app-defaults/XFontSel 183bca665ae87e3943bdb4362d21973d /etc/X11/app-defaults/Xfd a8b4d28d2ad895e40cfb6fb9c69eeecd /etc/X11/app-defaults/Xmessage eed84b35dde8b18e7dcfc80e75c1da67 /etc/X11/app-defaults/Xmessage-color ca383db9e4e9648bda0952ad6b8a2115 Description: X11 utilities An X client is a program that interfaces with an X server (almost always via the X libraries), and thus with some input and output hardware like a graphics card, monitor, keyboard, and pointing device (such as a mouse). . This package provides a miscellaneous assortment of X utilities that ship with the X Window System, including: - appres, editres, listres and viewres, which query the X resource database; - luit, a filter that can be run between an arbitrary application and a UTF-8 terminal emulator; - xdpyinfo, a display information utility for X; - xdriinfo, query configuration information of DRI drivers; - xev, an X event displayer; - xfd, a tool that displays all the glyphs in a given X font; - xfontsel, a tool for browsing and selecting X fonts; - xkill, a tool for terminating misbehaving X clients; - xlsatoms, which lists interned atoms defined on an X server; - xlsclients, which lists client applications running on an X display; - xlsfonts, a server font list displayer; - xmessage, a tool to display message or dialog boxes; - xprop, a property displayer for X; - xvinfo, an Xv extension information utility for X; - xwininfo, a window information utility for X; . The editres and viewres programs use bitmap images provided by the xbitmaps package. The luit program requires locale information from the libx11-data package. Package: x11-xkb-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 427 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: foreign Version: 7.7+4 Replaces: xbase-clients (<= 1:7.2.ds2-3) Depends: libc6 (>= 2.17), libx11-6, libxaw7, libxkbfile1, libxt6 Description: X11 XKB utilities xkbutils contains a number of client-side utilities for XKB, the X11 keyboard extension. . setxkbmap is a tool to query and change the current XKB map. . xkbbell generates a bell event through the keyboard. . xkbcomp is a tool to compile XKB definitions into map files the server can use. . xkbevd is an experimental tool to listen for certain XKB events and execute defined triggers when actions occur. . xkbprint is a tool to generate an image with the physical representation of the keyboard as XKB sees it. . xkbvleds shows the changing status of keyboard LEDs. . xkbwatch shows the changing status of modifiers and LEDs. Package: x11-xserver-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 493 Maintainer: Debian X Strike Force Architecture: arm64 Version: 7.7+8 Replaces: iceauth, sessreg, xbase-clients (<< 1:7.3), xgamma, xhost, xmodmap, xrandr, xrdb, xrefresh, xrgb, xset, xsetmode, xsetpointer, xsetroot, xstdcmap, xutils (<< 1:7.2), xvidtune Depends: libc6 (>= 2.26), libice6 (>= 1:1.0.0), libx11-6, libxaw7, libxcursor1 (>> 1.1.2), libxext6, libxi6, libxmu6, libxmuu1, libxrandr2 (>= 2:1.5.0), libxrender1, libxt6, libxxf86vm1, cpp Suggests: nickle, cairo-5c, xorg-docs-core Breaks: arandr (<< 0.1.9) Conflicts: iceauth, sessreg, xgamma, xhost, xmodmap, xrandr, xrdb, xrefresh, xrgb, xset, xsetmode, xsetpointer, xsetroot, xstdcmap, xvidtune Conffiles: /etc/X11/app-defaults/Xvidtune 0493a0782b498e9f0dee51a4013a80e6 Description: X server utilities An X client is a program that interfaces with an X server (almost always via the X libraries), and thus with some input and output hardware like a graphics card, monitor, keyboard, and pointing device (such as a mouse). . This package provides a miscellaneous assortment of X Server utilities that ship with the X Window System, including: - iceauth, a tool for manipulating ICE protocol authorization records; - rgb; - sessreg, a simple program for managing utmp/wtmp entries; - xcmsdb, a device color characteristic utility for the X Color Management System; - xgamma, a tool for querying and setting a monitor's gamma correction; - xhost, a very dangerous program that you should never use; - xmodmap, a utility for modifying keymaps and pointer button mappings in X; - xrandr, a command-line interface to the RandR extension; - xrdb, a tool to manage the X server resource database; - xrefresh, a tool that forces a redraw of the X screen; - xset, a tool for setting miscellaneous X server parameters; - xsetmode and xsetpointer, tools for handling X Input devices; - xsetroot, a tool for tailoring the appearance of the root window; - xstdcmap, a utility to selectively define standard colormap properties; - xvidtune, a tool for customizing X server modelines for your monitor. Package: xauth Status: install ok installed Priority: optional Section: x11 Installed-Size: 85 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: foreign Version: 1:1.0.10-1 Depends: libc6 (>= 2.17), libx11-6, libxau6, libxext6, libxmuu1 Description: X authentication utility xauth is a small utility to read and manipulate Xauthority files, which are used by servers and clients alike to control authentication and access to X sessions. Package: xdg-dbus-proxy Status: install ok installed Priority: optional Section: admin Installed-Size: 62 Maintainer: Utopia Maintenance Team Architecture: arm64 Multi-Arch: foreign Version: 0.1.1-1 Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.39.4) Description: filtering D-Bus proxy xdg-dbus-proxy is a filtering proxy for D-Bus connections. It was originally part of the Flatpak project, but it has been broken out as a standalone module to facilitate using it in other contexts, for example in WebKit-GTK's optional bubblewrap-based sandbox. . For this proxy to be useful, restricted D-Bus clients must be denied access to the normal D-Bus socket (for example by using containers or AppArmor rules), and instead given access to the listening Unix socket created by the proxy (typically by bind-mounting it into a Linux container). Homepage: https://github.com/flatpak/xdg-dbus-proxy Package: xdg-utils Status: install ok installed Priority: optional Section: utils Installed-Size: 327 Maintainer: Debian freedesktop.org maintainers Architecture: all Multi-Arch: foreign Version: 1.1.3-1+deb10u1 Recommends: libfile-mimeinfo-perl, libnet-dbus-perl, libx11-protocol-perl, x11-utils, x11-xserver-utils Description: desktop integration utilities from freedesktop.org xdg-utils contains utilities for integrating applications with the desktop environment, regardless of which desktop environment is used. . The following utilities are included: . * xdg-desktop-menu - Install desktop menu items * xdg-desktop-icon - Install icons on the user's desktop * xdg-email - Compose a new email in the user's preferred email client, potentially with subject and other info filled in * xdg-icon-resource - Install icon resources * xdg-mime - Query and install MIME types and associations * xdg-open - Open a URI in the user's preferred application that handles the respective URI or file type * xdg-screensaver - Enable, disable, or suspend the screensaver * xdg-settings - Get or set the default web browser and URI handlers Homepage: https://www.freedesktop.org/wiki/Software/xdg-utils/ Package: xdmx Status: hold ok installed Priority: optional Section: x11 Installed-Size: 1995 Maintainer: Debian X Strike Force Architecture: arm64 Source: xorg-server Version: 2:1.20.4-1+deb10u3 Depends: xserver-common (>= 2:1.20.4-1+deb10u3), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 2.0.82), libsystemd0, libunwind8, libx11-6 (>= 2:1.6.0), libxau6, libxdmcp6, libxext6, libxfixes3, libxfont2 (>= 1:2.0.1), libxi6, libxmuu1, libxrender1, libxshmfence1 Description: distributed multihead X server Xdmx is a proxy X server that uses one or more other X servers as its display device(s). It provides multi-head X functionality for displays that might be located on different machines. Xdmx functions as a front-end X server that acts as a proxy to a set of back-end X servers. All of the visible rendering is passed to the back-end X servers. Clients connect to the Xdmx front-end, and everything appears as it would in a regular multi-head configuration. If Xinerama is enabled (e.g., with +xinerama on the command line), the clients see a single large screen. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Homepage: https://www.x.org/ Package: xdmx-tools Status: hold ok installed Priority: optional Section: x11 Installed-Size: 374 Maintainer: Debian X Strike Force Architecture: arm64 Source: xorg-server Version: 2:1.20.4-1+deb10u3 Depends: xdmx, libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.0), libc6 (>= 2.17), libdmx1, libx11-6, libxaw7, libxext6, libxmu6, libxpm4, libxt6 Description: Distributed Multihead X tools This package provides a collection of tools used for administration of the Xdmx server; see the xdmx package for more information. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Homepage: https://www.x.org/ Package: xfce4-battery-plugin Status: install ok installed Priority: optional Section: xfce Installed-Size: 682 Maintainer: Debian Xfce Maintainers Architecture: arm64 Version: 1.1.2-1 Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.27), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.26.0), libgtk-3-0 (>= 3.16.2), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libxfce4panel-2.0-4 (>= 4.11.0), libxfce4ui-2-0 (>= 4.11.0), libxfce4util7 (>= 4.9.0) Description: battery monitor plugin for the Xfce4 panel A battery monitor panel plugin for Xfce4, compatible with APM and ACPI, using either /proc files or the new sysfs files for recent kernels. You can use this applet to monitor your battery level and be notified when your battery reaches low and critcal levels. The applet can even be programmed to execute a command on low and critcal levels. Homepage: https://goodies.xfce.org/ Package: xfce4-power-manager Status: install ok installed Priority: optional Section: xfce Installed-Size: 549 Maintainer: Debian Xfce Maintainers Architecture: arm64 Version: 1.6.1-1 Depends: upower (>= 0.99), xfce4-power-manager-data (= 1.6.1-1), libc6 (>= 2.17), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.41.1), libgtk-3-0 (>= 3.21.5), libnotify4 (>= 0.7.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libupower-glib3 (>= 0.99.0), libx11-6, libxext6, libxfce4ui-2-0 (>= 4.11.1), libxfce4util7 (>= 4.9.0), libxfconf-0-2 (>= 4.6.0), libxrandr2 (>= 2:1.2.99.2) Recommends: libpam-systemd, xfce4-power-manager-plugins Conffiles: /etc/xdg/autostart/xfce4-power-manager.desktop e98709aa9a92758436b8a97f2e243337 /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-power-manager.xml 9f465ee63d6b5a684de8cd420d35c392 Description: power manager for Xfce desktop This power manager for the Xfce desktop enables laptop users to set up a power profile for two different modes "on battery power" and "on ac power" while still allowing desktop users to at least change the DPMS settings and CPU frequency using the settings dialogue.. . It features: * battery monitoring * cpu frequency settings * monitor DPMS settings * suspend/Hibernate * LCD brightness control * Lid, sleep and power switches control Homepage: http://goodies.xfce.org/projects/applications/xfce4-power-manager Package: xfce4-power-manager-data Status: install ok installed Priority: optional Section: xfce Installed-Size: 3546 Maintainer: Debian Xfce Maintainers Architecture: all Source: xfce4-power-manager Version: 1.6.1-1 Replaces: xfce4-power-manager (<< 0.8.0~beta2-1) Recommends: librsvg2-common, xfce4-power-manager Description: power manager for Xfce desktop, arch-indep files This power manager for the Xfce desktop enables laptop users to set up a power profile for two different modes "on battery power" and "on ac power" while still allowing desktop users to at least change the DPMS settings and CPU frequency using the settings dialogue.. . This package contains architecture-independant files. Homepage: http://goodies.xfce.org/projects/applications/xfce4-power-manager Package: xfconf Status: install ok installed Priority: optional Section: xfce Installed-Size: 701 Maintainer: Debian Xfce Maintainers Architecture: arm64 Version: 4.12.1-1 Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.88), libglib2.0-0 (>= 2.37.3), libxfce4util7 (>= 4.9.0), default-dbus-session-bus | dbus-session-bus Recommends: libxfconf-0-2 (>= 4.6.0) Description: utilities for managing settings in Xfce xfconf contains xfconfd and xfconf-query. - xfconfd handles the Xfce settings storage - xfconf-query enables users to tune settings from command line Homepage: http://www.xfce.org Package: xfonts-encodings Status: install ok installed Priority: optional Section: x11 Installed-Size: 668 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Version: 1:1.0.4-2 Replaces: xfonts-base (<< 1:1.0.0) Depends: x11-common Description: Encodings for X.Org fonts This package contains the encodings that map to specific characters. Package: xfonts-intl-chinese Status: install ok installed Priority: optional Section: x11 Installed-Size: 6404 Maintainer: Debian QA Group Architecture: all Source: intlfonts Version: 1.2.1-10 Replaces: intlfonts-chinese Depends: xfonts-utils Suggests: xfs | xserver, xfonts-intl-chinese-big, xfonts-cjk, emacs-intl-fonts Conflicts: intlfonts-chinese Conffiles: /etc/X11/fonts/X11R7/misc/xfonts-intl-chinese.alias e171dab95af743f9f0611ad4978e7bfd Description: international fonts for X - Chinese This package includes some GB2312, GB8565-88, Big5 (ETen), and SiSheng Chinese fonts. You will need these fonts if you plan to view, print, or author documents written in Chinese using the above encodings. . The fonts are for use with the X Window System. Package: xfonts-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 406 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: foreign Version: 1:7.7+6 Depends: libc6 (>= 2.17), libfontenc1, libfreetype6 (>= 2.2.1), zlib1g (>= 1:1.1.4), x11-common, xfonts-encodings Description: X Window System font utility programs xfonts-utils provides a set of utility programs shipped with the X Window System that are needed for font management. . The programs in this package include: - bdftopcf, which converts BDF fonts to PCF fonts; - bdftruncate and ucs2any, tools to generate fonts with various encodings from ISO 10646-encoded fonts - mkfontdir, a program to generate fonts.dir files; - mkfontscale, a program to generate fonts.scale files; - fonttosfnt, a program to wrap bitmap fonts in a sfnt (TrueType) wrapper. Package: xinit Status: install ok installed Priority: optional Section: x11 Installed-Size: 84 Maintainer: Debian X Strike Force Architecture: arm64 Version: 1.4.0-1 Depends: libc6 (>= 2.17), libx11-6, coreutils (>= 7.4-1), x11-common, xauth Recommends: xserver-xorg | xserver, xterm | x-session-manager | x-window-manager | x-terminal-emulator Conffiles: /etc/X11/xinit/xinitrc c11ee025d7c11c6e0b7a90d76cb424d1 /etc/X11/xinit/xserverrc 50faa91e980a25adcd0de32020b340bb Description: X server initialisation tool xinit and startx are programs which facilitate starting an X server, and loading a base X session. Package: xkb-data Status: install ok installed Priority: optional Section: x11 Installed-Size: 6050 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: xkeyboard-config Version: 2.26-2 Breaks: libx11-6 (<< 2:1.4.3) Description: X Keyboard Extension (XKB) configuration data This package contains configuration data used by the X Keyboard Extension (XKB), which allows selection of keyboard layouts when using a graphical interface. . Every X11 vendor provides its own XKB data files, so keyboard layout designers have to send their layouts to several places. The xkeyboard-config project has been launched at FreeDesktop in order to provide a central repository that could be used by all vendors. Homepage: https://www.freedesktop.org/Software/XKeyboardConfig Package: xl2tpd Status: deinstall ok config-files Priority: optional Section: net Installed-Size: 221 Maintainer: Samir Hussain Architecture: arm64 Version: 1.3.12-1.1 Config-Version: 1.3.12-1.1 Provides: l2tpd Depends: libc6 (>= 2.22), libpcap0.8 (>= 0.9.8), ppp, lsb-base (>= 3.0-6) Conffiles: /etc/default/xl2tpd fadc31f26078d8c3fb033d7d4516500b /etc/init.d/xl2tpd 65b9d6566a0eb3ba4078b72e08ab38a0 /etc/xl2tpd/l2tp-secrets cf391b51b732f02a7f0c7f783985b914 /etc/xl2tpd/xl2tpd.conf 3c7f48565aff98751a9ef2d734b56405 Description: layer 2 tunneling protocol implementation xl2tpd is an open source implementation of the L2TP tunneling protocol (RFC2661). xl2tpd is forked from l2tpd and is maintained by Xelerance Corporation. . The main purpose of this protocol is to tunnel PPP frames through IP networks. It implements both LAC and LNS role in the L2TP networking architecture. Homepage: https://www.xelerance.com/software/xl2tpd/ Package: xnest Status: hold ok installed Priority: optional Section: x11 Installed-Size: 1750 Maintainer: Debian X Strike Force Architecture: arm64 Source: xorg-server Version: 2:1.20.4-1+deb10u3 Provides: xserver Depends: xserver-common (>= 2:1.20.4-1+deb10u3), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libgl1, libpixman-1-0 (>= 0.13.2), libselinux1 (>= 2.0.82), libsystemd0, libunwind8, libx11-6, libxau6, libxdmcp6, libxext6, libxfont2 (>= 1:2.0.1), libxshmfence1 Recommends: libgl1-mesa-dri (>= 7.1~rc1) Description: Nested X server Xnest is a nested X server that simply relays all its requests to another X server, where it runs as a client. This means that it appears as another window in your current X session. Xnest relies upon its parent X server for font services. . Use of the Xephyr X server instead of Xnest is recommended. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Homepage: https://www.x.org/ Package: xorg-server-source Status: hold ok installed Priority: optional Section: x11 Installed-Size: 3347 Maintainer: Debian X Strike Force Architecture: all Source: xorg-server Version: 2:1.20.4-1+deb10u3 Description: Xorg X server - source files This package provides original Debian (with Debian patches already applied, and autotools files updated) sources for the X.Org ('Xorg') X server shipped in a tarball. This enables other projects re-using X server codebase (e.g. VNC servers) to (re-)use officially Debian-supported version of the X xserver for their builds. . Unless you are building a software product using X server sources, you probably want xserver-xorg and/or xserver-xorg-core instead. Homepage: https://www.x.org/ Package: xserver-common Status: hold ok installed Priority: optional Section: x11 Installed-Size: 187 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: xorg-server Version: 2:1.20.4-1+deb10u3 Replaces: xserver-xorg-core (<< 2:1.5.2) Depends: x11-common, xkb-data, x11-xkb-utils Recommends: xfonts-base, xauth Description: common files used by various X servers This package provides files necessary for all X.Org based X servers. Homepage: https://www.x.org/ Package: xserver-xephyr Status: hold ok installed Priority: optional Section: x11 Installed-Size: 2492 Maintainer: Debian X Strike Force Architecture: arm64 Source: xorg-server Version: 2:1.20.4-1+deb10u3 Provides: xserver Depends: xserver-common (>= 2:1.20.4-1+deb10u3), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdrm2 (>= 2.3.1), libepoxy0 (>= 1.0), libgcrypt20 (>= 1.8.0), libgl1, libpixman-1-0 (>= 0.30.0), libselinux1 (>= 2.0.82), libsystemd0, libudev1 (>= 183), libunwind8, libx11-6, libx11-xcb1, libxau6, libxcb-glx0, libxcb-icccm4 (>= 0.4.1), libxcb-image0 (>= 0.2.1), libxcb-keysyms1 (>= 0.4.0), libxcb-randr0 (>= 1.1), libxcb-render-util0, libxcb-render0, libxcb-shape0, libxcb-shm0 (>= 1.10), libxcb-util0 (>= 0.3.8), libxcb-xf86dri0, libxcb-xkb1, libxcb-xv0 (>= 1.2), libxcb1 (>= 1.8), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1 Recommends: libgl1-mesa-dri (>= 7.1~rc1) Description: nested X server Xephyr is an X server that can be run inside another X server, much like Xnest. It is based on the kdrive X server, and as a result it supports newer extensions than Xnest, including render and composite. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Homepage: https://www.x.org/ Package: xserver-xorg Status: install ok installed Priority: optional Section: x11 Installed-Size: 238 Maintainer: Debian X Strike Force Architecture: arm64 Source: xorg Version: 1:7.7+19 Provides: xserver Depends: xserver-xorg-core (>= 2:1.17.2-2), xserver-xorg-video-all | xorg-driver-video, xserver-xorg-input-all | xorg-driver-input, xkb-data (>= 1.4), x11-xkb-utils Recommends: libgl1-mesa-dri, xserver-xorg-legacy Description: X.Org X server This package depends on the full suite of the server and drivers for the X.Org X server. It does not provide the actual server itself. Homepage: http://www.x.org/ Package: xserver-xorg-core Status: hold ok installed Priority: optional Section: x11 Installed-Size: 3820 Maintainer: Debian X Strike Force Architecture: arm64 Source: xorg-server Version: 2:1.20.4-1+deb10u3 Replaces: xserver-xorg (<< 1:7.7+10~), xserver-xorg-video-modesetting Provides: xorg-input-abi-24, xorg-video-abi-24, xserver-xorg-video-modesetting Depends: xserver-common (>= 2:1.20.4-1+deb10u3), keyboard-configuration, udev (>= 149), libegl1-mesa | libegl1, libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdrm2 (>= 2.4.66), libepoxy0 (>= 1.4.3), libgbm1 (>= 17.1.0~rc2), libgcrypt20 (>= 1.8.0), libgl1, libpciaccess0 (>= 0.12.902), libpixman-1-0 (>= 0.30.0), librga2, libselinux1 (>= 2.0.82), libsystemd0, libudev1 (>= 183), libunwind8, libxau6, libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1 Recommends: libgl1-mesa-dri (>= 7.10.2-4), libpam-systemd Suggests: xfonts-100dpi | xfonts-75dpi, xfonts-scalable Breaks: libgl1-mesa-dri (<< 18.0.5), systemd (<< 226-4~), xserver-xorg (<< 1:7.7+10~) Conflicts: xserver-xorg-input-evtouch, xserver-xorg-video-modesetting Description: Xorg X server - core server The Xorg X server is an X server for several architectures and operating systems, which is derived from the XFree86 4.x series of X servers. . The Xorg server supports most modern graphics hardware from most vendors, and supersedes all XFree86 X servers. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Homepage: https://www.x.org/ Package: xserver-xorg-input-all Status: install ok installed Priority: optional Section: x11 Installed-Size: 46 Maintainer: Debian X Strike Force Architecture: arm64 Source: xorg Version: 1:7.7+19 Depends: xserver-xorg-input-libinput Recommends: xserver-xorg-input-wacom Description: X.Org X server -- input driver metapackage This package depends on the full suite of input drivers for the X.Org X server (Xorg). It does not provide any drivers itself, and may be removed if you wish to only have certain drivers installed. Homepage: http://www.x.org/ Package: xserver-xorg-input-libinput Status: install ok installed Priority: optional Section: x11 Installed-Size: 129 Maintainer: Debian X Strike Force Architecture: arm64 Version: 0.28.2-2 Provides: xorg-driver-input Depends: libc6 (>= 2.17), libinput10 (>= 1.11.1), xorg-input-abi-24, xserver-xorg-core (>= 2:1.18.99.901) Description: X.Org X server -- libinput input driver This package provides the driver for input devices using libinput library. It can handle keyboards, mice and touchpads, and essentially replaces the separate -evdev and -synaptics drivers. . This package is built from the X.org xf86-input-libinput driver module. Homepage: https://www.x.org Package: xserver-xorg-legacy Status: hold ok installed Priority: optional Section: x11 Installed-Size: 214 Maintainer: Debian X Strike Force Architecture: arm64 Source: xorg-server Version: 2:1.20.4-1+deb10u3 Replaces: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~) Depends: xserver-common (>= 2:1.20.4-1+deb10u3), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.0), libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0 Breaks: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~) Description: setuid root Xorg server wrapper This package provides a wrapper for the Xorg X server, which is necessary for legacy drivers and non-Linux kernels. Homepage: https://www.x.org/ Package: xserver-xorg-video-all Status: install ok installed Priority: optional Section: x11 Installed-Size: 46 Maintainer: Debian X Strike Force Architecture: arm64 Source: xorg Version: 1:7.7+19 Replaces: xserver-xorg-driver-all Depends: xserver-xorg-video-amdgpu, xserver-xorg-video-ati, xserver-xorg-video-fbdev, xserver-xorg-video-nouveau, xserver-xorg-video-vesa Conflicts: xserver-xorg-driver-all Description: X.Org X server -- output driver metapackage This package depends on the full suite of output drivers for the X.Org X server (Xorg). It does not provide any drivers itself, and may be removed if you wish to only have certain drivers installed. Homepage: http://www.x.org/ Package: xserver-xorg-video-amdgpu Status: install ok installed Priority: optional Section: x11 Installed-Size: 239 Maintainer: Debian X Strike Force Architecture: arm64 Version: 18.1.99+git20190207-1 Provides: xorg-driver-video Depends: libc6 (>= 2.17), libdrm-amdgpu1 (>= 2.4.73), libgbm1 (>= 10.2~0), libudev1 (>= 183), xorg-video-abi-24, xserver-xorg-core (>= 2:1.18.99.901) Suggests: firmware-amd-graphics Description: X.Org X server -- AMDGPU display driver This package provides the 'amdgpu' driver for the AMD Radeon cards. The following chip families should be supported: Bonaire, Hawaii, Kaveri, Kabini Mullins, Iceland, Tonga, Carrizo, Fiji, Stoney. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-amdgpu driver module. Package: xserver-xorg-video-ati Status: install ok installed Priority: optional Section: x11 Installed-Size: 381 Maintainer: Debian X Strike Force Architecture: arm64 Version: 1:19.0.1-1 Provides: xorg-driver-video Depends: libc6 (>= 2.17), libpciaccess0, xorg-video-abi-24, xserver-xorg-core (>= 2:1.18.99.901), xserver-xorg-video-radeon Suggests: xserver-xorg-video-r128, xserver-xorg-video-mach64 Description: X.Org X server -- AMD/ATI display driver wrapper This package provides the 'ati' driver for the AMD/ATI Mach64, Rage128, Radeon, FireGL, FireMV, FirePro and FireStream series. This driver is actually a wrapper that loads one of the 'mach64', 'r128' or 'radeon' sub-drivers depending on the hardware. These sub-drivers are brought through package dependencies. . Users of Rage, Mach, or Radeon boards may remove this package only if they use Driver "r128", "mach64", or "radeon" in /etc/X11/xorg.conf instead of relying on autodetection. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-ati driver module. Homepage: https://wiki.freedesktop.org/xorg/RadeonFeature/ Package: xserver-xorg-video-fbdev Status: install ok installed Priority: optional Section: x11 Installed-Size: 56 Maintainer: Debian X Strike Force Architecture: arm64 Version: 1:0.5.0-1 Provides: xorg-driver-video Depends: libc6 (>= 2.17), xorg-video-abi-24, xserver-xorg-core (>= 2:1.18.99.901) Description: X.Org X server -- fbdev display driver This package provides the driver for the Linux framebuffer device (aka 'fbdev'). . More information about X.Org can be found at: . This package is built from the X.org xf86-video-fbdev driver module. Package: xserver-xorg-video-nouveau Status: install ok installed Priority: optional Section: x11 Installed-Size: 460 Maintainer: Debian X Strike Force Architecture: arm64 Version: 1:1.0.16-1 Provides: xorg-driver-video Depends: libc6 (>= 2.17), libdrm-nouveau2 (>= 2.4.38), libdrm2 (>= 2.4.61), libudev1 (>= 183), xorg-video-abi-24, xserver-xorg-core (>= 2:1.18.99.901) Recommends: libgl1-mesa-dri (>= 9.0) Suggests: firmware-misc-nonfree Description: X.Org X server -- Nouveau display driver This driver for the X.Org X server (see xserver-xorg for a further description) provides support for NVIDIA Riva, TNT, GeForce, and Quadro cards. . This package provides 2D support including EXA acceleration, Xv and RandR. 3D functionality is provided by the libgl1-mesa-dri package. . This package is built from the FreeDesktop.org xf86-video-nouveau driver. Homepage: https://nouveau.freedesktop.org/wiki/ Package: xserver-xorg-video-radeon Status: install ok installed Priority: optional Section: x11 Installed-Size: 892 Maintainer: Debian X Strike Force Architecture: arm64 Source: xserver-xorg-video-ati Version: 1:19.0.1-1 Provides: xorg-driver-video Depends: libc6 (>= 2.17), libdrm-radeon1 (>= 2.4.39), libgbm1 (>= 10.2~0), libudev1 (>= 183), xorg-video-abi-24, xserver-xorg-core (>= 2:1.18.99.901) Suggests: firmware-amd-graphics Description: X.Org X server -- AMD/ATI Radeon display driver This package provides the 'radeon' driver for the AMD/ATI cards. The following chips should be supported: R100, RV100, RS100, RV200, RS200, RS250, R200, RV250, RV280, RS300, RS350, RS400/RS480, R300, R350, R360, RV350, RV360, RV370, RV380, RV410, R420, R423/R430, R480/R481, RV505/RV515/RV516/RV550, R520, RV530/RV560, RV570/R580, RS600/RS690/RS740, R600, RV610/RV630, RV620/RV635, RV670, RS780/RS880, RV710/RV730, RV740/RV770/RV790, CEDAR, REDWOOD, JUNIPER, CYPRESS, HEMLOCK, PALM, SUMO/SUMO2, BARTS, TURKS, CAICOS, CAYMAN, ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI, MULLINS, KAVERI, HAWAII. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-ati driver module. Homepage: https://wiki.freedesktop.org/xorg/RadeonFeature/ Package: xserver-xorg-video-vesa Status: install ok installed Priority: optional Section: x11 Installed-Size: 64 Maintainer: Debian X Strike Force Architecture: arm64 Version: 1:2.4.0-1 Provides: xorg-driver-video Depends: libc6 (>= 2.17), xorg-video-abi-24, xserver-xorg-core (>= 2:1.18.99.901) Description: X.Org X server -- VESA display driver This driver for the X.Org X server (see xserver-xorg for a further description) uses the standard VESA interface provided on all video cards, but runs unaccelerated. This driver is not recommended for use unless you have a problem with the normal driver for your card, because it will perform very badly. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-vesa driver module. Package: xterm Status: deinstall ok config-files Priority: optional Section: x11 Installed-Size: 2205 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: foreign Version: 344-1+deb10u2 Config-Version: 344-1+deb10u2 Provides: x-terminal-emulator Depends: xbitmaps, libc6 (>= 2.17), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libice6 (>= 1:1.0.0), libtinfo6 (>= 6), libutempter0 (>= 1.1.5), libx11-6, libxaw7, libxft2 (>> 2.1.1), libxinerama1, libxmu6, libxpm4, libxt6 Recommends: x11-utils Suggests: xfonts-cyrillic Conffiles: /etc/X11/app-defaults/KOI8RXTerm e904665737663827da6ff9b9651910df /etc/X11/app-defaults/KOI8RXTerm-color d2d26270262950b81921694506281cfe /etc/X11/app-defaults/UXTerm 3ee3b2958ca3aadba1d7f1f5e419951b /etc/X11/app-defaults/UXTerm-color 446ecb44b3bec790d5c7ac8582ef6ca5 /etc/X11/app-defaults/XTerm d2137c272897438b1fd17103ad6f5c1d /etc/X11/app-defaults/XTerm-color 0ceac6d8b2f3e33be29edddb64394d96 Description: X terminal emulator xterm is a terminal emulator for the X Window System. It provides DEC VT102 and Tektronix 4014 compatible terminals for programs that cannot use the window system directly. This version implements ISO/ANSI colors and most of the control sequences used by DEC VT220 terminals. . This package provides four commands: xterm, which is the traditional terminal emulator; uxterm, which is a wrapper around xterm that is intelligent about locale settings (especially those which use the UTF-8 character encoding), but which requires the luit program from the x11-utils package; koi8rxterm, a wrapper similar to uxterm for locales that use the KOI8-R character set; and lxterm, a simple wrapper that chooses which of the previous commands to execute based on the user's locale settings. . A complete list of control sequences supported by the X terminal emulator is provided in /usr/share/doc/xterm. . The xterm program uses bitmap images provided by the xbitmaps package. . Those interested in using koi8rxterm will likely want to install the xfonts-cyrillic package as well. Homepage: https://invisible-island.net/xterm/xterm.html Package: xvfb Status: hold ok installed Priority: optional Section: x11 Installed-Size: 2153 Maintainer: Debian X Strike Force Architecture: arm64 Multi-Arch: foreign Source: xorg-server Version: 2:1.20.4-1+deb10u3 Provides: xserver Depends: xserver-common (>= 2:1.20.4-1+deb10u3), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.17), libgcrypt20 (>= 1.8.0), libgl1, libpixman-1-0 (>= 0.30.0), libselinux1 (>= 2.0.82), libsystemd0, libunwind8, libxau6, libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1 Recommends: xauth Description: Virtual Framebuffer 'fake' X server Xvfb provides an X server that can run on machines with no display hardware and no physical input devices. It emulates a dumb framebuffer using virtual memory. The primary use of this server was intended to be server testing, but other novel uses for it have been found, including testing clients against unusual depths and screen configurations, doing batch processing with Xvfb as a background rendering engine, load testing, as an aid to porting the X server to a new platform, and providing an unobtrusive way to run applications that don't really need an X server but insist on having one anyway. . This package also contains a convenience script called xvfb-run which simplifies the automated execution of X clients in a virtual server environment. This convenience script requires the use of the xauth program. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Homepage: https://www.x.org/ Package: xxd Status: install ok installed Priority: optional Section: editors Installed-Size: 189 Maintainer: Debian Vim Maintainers Architecture: arm64 Multi-Arch: foreign Source: vim Version: 2:8.1.0875-5+deb10u6 Replaces: vim-common (<< 2:7.4.2347-1~) Depends: libc6 (>= 2.17) Breaks: vim-common (<< 2:7.4.2347-1~) Description: tool to make (or reverse) a hex dump xxd creates a hex dump of a given file or standard input. It can also convert a hex dump back to its original binary form. Homepage: https://www.vim.org/ Package: xz-utils Status: install ok installed Priority: standard Section: utils Installed-Size: 438 Maintainer: Jonathan Nieder Architecture: arm64 Multi-Arch: foreign Version: 5.2.4-1+deb10u1 Replaces: lzip (<< 1.8~rc2), xz-lzma Provides: lzma Depends: libc6 (>= 2.17), liblzma5 (>= 5.2.2) Breaks: lzip (<< 1.8~rc2) Conflicts: lzma (<< 9.22-1), xz-lzma Description: XZ-format compression utilities XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . This package provides the command line tools for working with XZ compression, including xz, unxz, xzcat, xzgrep, and so on. They can also handle the older LZMA format, and if invoked via appropriate symlinks will emulate the behavior of the commands in the lzma package. . The XZ format is similar to the older LZMA format but includes some improvements for general use: . * 'file' magic for detecting XZ files; * crc64 data integrity check; * limited random-access reading support; * improved support for multithreading (not used in xz-utils); * support for flushing the encoder. Homepage: https://tukaani.org/xz/ Package: zathura Status: deinstall ok config-files Priority: optional Section: text Installed-Size: 609 Maintainer: Sebastian Ramacher Architecture: arm64 Version: 0.4.3-1 Config-Version: 0.4.3-1 Provides: zathura-abi-4 Depends: zathura-pdf-poppler, libc6 (>= 2.28), libcairo2 (>= 1.14.0), libgirara-gtk3-3 (>= 0.3.2), libglib2.0-0 (>= 2.50), libgtk-3-0 (>= 3.22), libmagic1 (>= 5.12), libpango-1.0-0 (>= 1.14.0), libseccomp2 (>= 0.0.0~20120605), libsqlite3-0 (>= 3.5.9), libsynctex2 Suggests: www-browser, zathura-ps, zathura-djvu, zathura-cb Description: document viewer with a minimalistic interface zathura is a document viewer with a minimalistic and space saving interface. It offers a vim-like experience and has a focus on keyboard interaction. The key bindings, commands and most other settings can be customized. . Some of the features are: * bookmarking pages * printing the whole document or specific pages * following links * searching in the document * browsing the document index * SyncTex forward and backward synchronization . zathura can be extended to support other file formats via a plugin system. Homepage: https://pwmt.org/projects/zathura Package: zip Status: install ok installed Priority: optional Section: utils Installed-Size: 617 Maintainer: Santiago Vila Architecture: arm64 Multi-Arch: foreign Source: zip (3.0-11) Version: 3.0-11+b1 Depends: libbz2-1.0, libc6 (>= 2.17) Recommends: unzip Description: Archiver for .zip files This is InfoZIP's zip program. It produces files that are fully compatible with the popular PKZIP program; however, the command line options are not identical. In other words, the end result is the same, but the methods differ. :-) . This version supports encryption. Homepage: http://www.info-zip.org/Zip.html Package: zlib1g Status: install ok installed Priority: optional Section: libs Installed-Size: 158 Maintainer: Mark Brown Architecture: arm64 Multi-Arch: same Source: zlib Version: 1:1.2.11.dfsg-1+deb10u2 Provides: libz1 Depends: libc6 (>= 2.17) Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12) Conflicts: zlib1 (<= 1:1.0.4-7) Description: compression library - runtime zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the shared library. Homepage: http://zlib.net/