libexif - en to unknown language translation catalogue (64 entries)

en: %2.2f meters
target: %2.2f metres

en: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
target: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: AF position: center
target: AF position: centre

en: Adapter
target: Adaptor

en: Bottom-center
target: Bottom-centre

en: Center
target: Centre

en: Center-right
target: Centre-right

en: Center-weight
target: Centre-weight

en: Center-weighted average
target: Centre-weighted average

en: Centered
target: Centred

en: Centimeter
target: Centimetre

en: Color
target: Colour

en: Color Adjustment Mode
target: Colour Adjustment Mode

en: Color Control
target: Colour Control

en: Color Information
target: Colour Information

en: Color Matrix
target: Colour Matrix

en: Color Matrix Number
target: Colour Matrix Number

en: Color Mode
target: Colour Mode

en: Color Mode (?)
target: Colour Mode (?)

en: Color Space
target: Colour Space

en: Color Tone
target: Colour Tone

en: Color accent
target: Colour accent

en: Color sequential area sensor
target: Colour sequential area sensor

en: Color sequential linear sensor
target: Colour sequential linear sensor

en: Color swap
target: Colour swap

en: Colors
target: Colours

en: Copyright information. In this standard the tag is used to indicate both the photographer and editor copyrights. It is the copyright notice of the person or organization claiming rights to the image. The Interoperability copyright statement including date and rights should be written in this field; e.g., "Copyright, John Smith, 19xx. All rights reserved.". In this standard the field records both the photographer and editor copyrights, with each recorded in a separate part of the statement. When there is a clear distinction between the photographer and editor copyrights, these are to be written in the order of photographer followed by editor copyright, separated by NULL (in this case, since the statement also ends with a NULL, there are two NULL codes) (see example 1). When only the photographer is given, it is terminated by one NULL code (see example 2). When only the editor copyright is given, the photographer copyright part consists of one space followed by a terminating NULL code, then the editor copyright is given (see example 3). When the field is left blank, it is treated as unknown.
target: Copyright information. In this standard the tag is used to indicate both the photographer and editor copyrights. It is the copyright notice of the person or organisation claiming rights to the image. The Interoperability copyright statement including date and rights should be written in this field; e.g., "Copyright, John Smith, 19xx. All rights reserved.". In this standard the field records both the photographer and editor copyrights, with each recorded in a separate part of the statement. When there is a clear distinction between the photographer and editor copyrights, these are to be written in the order of photographer followed by editor copyright, separated by NULL (in this case, since the statement also ends with a NULL, there are two NULL codes) (see example 1). When only the photographer is given, it is terminated by one NULL code (see example 2). When only the editor copyright is given, the photographer copyright part consists of one space followed by a terminating NULL code, then the editor copyright is given (see example 3). When the field is left blank, it is treated as unknown.

en: Creative program (biased toward depth of field)
target: Creative programme (biased towards depth of field)

en: Creative program (biased toward fast shutter speed)
target: Creative programme (biased towards fast shutter speed)

en: Date and Time (Digitized)
target: Date and Time (Digitised)

en: FinePix Color
target: FinePix Colour

en: Fixed center
target: Fixed centre

en: Grayscale
target: Greyscale

en: Image Stabilization
target: Image Stabilisation

en: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is meters.
target: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is metres.

en: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GSPAltitude tag. The reference unit is meters. Note that this tag is BYTE type, unlike other reference tags.
target: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GSPAltitude tag. The reference unit is metres. Note that this tag is BYTE type, unlike other reference tags.

en: Indicates the color filter array (CFA) geometric pattern of the image sensor when a one-chip color area sensor is used. It does not apply to all sensing methods.
target: Indicates the colour filter array (CFA) geometric pattern of the image sensor when a one-chip colour area sensor is used. It does not apply to all sensing methods.

en: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the center of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and the second indicates the Y row number.
target: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the centre of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and the second indicates the Y row number.

en: Left-center
target: Left-centre

en: Light Value Center
target: Light Value Centre

en: Movie
target: Film

en: My color data
target: My colour data

en: My colors
target: My colours

en: Normal program
target: Normal programme

en: One-chip color area sensor
target: One-chip colour area sensor

en: Optimize Image
target: Optimise Image

en: Program
target: Programme

en: Program AE
target: Programme AE

en: Sub-second Time (Digitized)
target: Sub-second Time (Digitised)

en: The chromaticity of the three primary colors of the image. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
target: The chromaticity of the three primary colours of the image. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The chromaticity of the white point of the image. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
target: The chromaticity of the white point of the image. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The class of the program used by the camera to set exposure when the picture is taken.
target: The class of the programme used by the camera to set exposure when the picture is taken.

en: The color space information tag is always recorded as the color space specifier. Normally sRGB (=1) is used to define the color space based on the PC monitor conditions and environment. If a color space other than sRGB is used, Uncalibrated (=FFFF.H) is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.
target: The colour space information tag is always recorded as the colour space specifier. Normally sRGB (=1) is used to define the colour space based on the PC monitor conditions and environment. If a colour space other than sRGB is used, Uncalibrated (=FFFF.H) is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.

en: The distance to the subject, given in meters.
target: The distance to the subject, given in metres.

en: The manufacturer of the recording equipment. This is the manufacturer of the DSC, scanner, video digitizer or other equipment that generated the image. When the field is left blank, it is treated as unknown.
target: The manufacturer of the recording equipment. This is the manufacturer of the DSC, scanner, video digitiser or other equipment that generated the image. When the field is left blank, it is treated as unknown.

en: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in "Color Space Guidelines", is used as the default. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.
target: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in "Colour Space Guidelines", is used as the default. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.

en: The model name or model number of the equipment. This is the model name or number of the DSC, scanner, video digitizer or other equipment that generated the image. When the field is left blank, it is treated as unknown.
target: The model name or model number of the equipment. This is the model name or number of the DSC, scanner, video digitiser or other equipment that generated the image. When the field is left blank, it is treated as unknown.

en: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centered); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centered) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centered and co-sited positioning.
target: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centred); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centred) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centred and co-sited positioning.

en: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.
target: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.

en: This tag indicates the use of special processing on image data, such as rendering geared to output. When special processing is performed, the reader is expected to disable or minimize any further processing.
target: This tag indicates the use of special processing on image data, such as rendering geared to output. When special processing is performed, the reader is expected to disable or minimise any further processing.

en: Three-chip color area sensor
target: Three-chip colour area sensor

en: Top-center
target: Top-centre

en: Two-chip color area sensor
target: Two-chip colour area sensor

en: When loading and resaving Exif data, save the maker note unmodified. Be aware that the maker note can get corrupted.
target: When loading and resaving Exif data, save the maker note unmodified. Be aware that the maker note can be corrupted.
